Need an Appliance Repaired in TAS?

Tell us your town, the appliance, its brand and model number, how it is powered and what it is doing wrong. We will pass that description to local appliance repairers across Tasmania, so every quote you receive prices the same fault.

Get Free Appliance Repair Quotes

Appliance Repair and Related Prices Across TAS

Appliance repair visitPriced on quote
Electrician call-out and first hour$120 - $240
Electrician hourly rate$95 - $145
After hours electrical call-out$200 - $450
Electrical fault finding$150 - $500
Heat pump service$150 - $300
Gas safety inspection$120 - $200
Gas appliance connection$120 - $250
Induction cooktop circuit$400 - $1,200
Single oven clean$110 - $180

These are 2027 estimates for typical Tasmanian homes. Repair visits are priced on quote because the fault, the parts, the model's age and the travel all change from one job to the next.

Appliance Repair Services TAS - Get Local Quotes

Appliance repair in Tasmania covers the fridges, washing machines, dryers, dishwashers, ovens, cooktops and benchtop machines that keep a household running. Before anyone quotes, the first question is which trade should handle the fault, because Tasmanian law splits the work by how each appliance gets its power or gas. A plug-in machine running on ordinary household voltage can be repaired by a technician without an electrical licence. A hardwired oven or hot water unit is wired straight into a fixed circuit, and work on that circuit is licensed electrical work. Gas cookers and heaters fall under the state's gas-fitting rules, and any repair that opens the sealed cooling system of a fridge or heat pump needs a licence to handle refrigerant, the cooling gas. Licensing once run by CBOS, the former state licensing office, has moved to Consumer Affairs Tasmania and Building Standards Tasmania. A fault in a fairly new appliance may be the seller's problem under the consumer guarantees, your automatic rights, so check your rights before paying for a fix. Repair visits are priced on quote, while related electrical and gas jobs carry 2027 estimates for typical homes. Old fridges and heat pumps need care when dumped, because their refrigerant must be recovered by a licensed technician. A clear brief with the brand, model, fault and connection type helps every repairer price the same job, so the quotes match. Post your job on The Quote Yard and we will connect you with local appliance repairers across Tasmania who can quote on it.

Appliance Repairs Around Tasmania

Appliance repairers visit homes, rentals, shacks and small businesses from Hobart and Launceston to Devonport, Burnie, the East Coast and the Huon Valley. We can connect you with local repairers who all price the same written description of your appliance and its fault.

Get Free Quotes

Appliance Repair and Related Costs at a Glance, TAS 2027

Job Price Range How It Is Charged What Moves the Price Who Can Do It
Plug-in appliance repair Priced on quote Call-out plus parts and labour Fault, parts and model age Appliance repair technician
Fridge or freezer sealed system Priced on quote Diagnosis then fixed quote Refrigerant work and parts Refrigerant licence holder
Electrician call-out and first hour $120 - $240 Fixed call-out Distance and time of day Licensed electrician
Electrician hourly rate $95 - $145 Per hour after the first Job length Licensed electrician
After hours electrical call-out $200 - $450 Fixed premium call-out Night, weekend or holiday Licensed electrician
Electrical fault finding $150 - $500 Hourly with a limit How hard the fault is to trace Licensed electrician
Heat pump service $150 - $300 Per unit Indoor and outdoor access Licensed technician
Gas safety inspection $120 - $200 Per visit Number of gas appliances Licensed gas-fitter
Gas appliance connection $120 - $250 Labour only Pipe and fitting condition Licensed gas-fitter
Gas cooktop installation $180 - $350 Labour only Benchtop cut-out and gas line Licensed gas-fitter
Induction cooktop circuit $400 - $1,200 Per circuit Switchboard space and cable run Licensed electrician

What Pushes a Repair Bill Up

What is involved
A fault that needs a second visit because the part must be ordered in. Each extra trip can add travel time to the bill.
Work on the sealed cooling system of a fridge, freezer or heat pump. Removing and refilling the cooling gas needs a licensed technician and extra equipment.
A hardwired or gas appliance that needs a licensed trade to disconnect it first. Two trades on one job means paying labour for both of them.
Travel to the West Coast, remote farms or the Bass Strait islands. These trips are priced on quote by each business.
Ask every repairer to list the call-out, diagnosis, parts, labour, travel and any licensed work on separate lines.

Which Trade Your Broken Appliance Belongs To

Appliance repair means finding and fixing a fault in a household machine, from a fridge that has stopped cooling to a dryer that runs without heat. In Tasmania the right person for the job depends less on the fault and more on how the appliance is connected to power or gas. A washing machine with a plug, a dishwasher on a cord and a benchtop coffee machine are all handled by appliance technicians. A built-in oven wired into the wall, an electric water heater and a gas cooktop each need a licensed trade as well. Sorting that out before you call saves a wasted visit, and the work licensed electricians handle is set out in our Tasmanian electrician hub.

The fault itself still matters, because a repairer needs to know what the machine is doing before deciding what to bring. A fridge that runs warm, a washer that will not drain and an oven element that glows on one side only are very different jobs. Photos of the rating plate, the label listing brand, model and serial number, a fault video and any error code let a repairer bring the likely parts on the first visit. Clear details also help each business price the same job, so the quotes you receive can be compared fairly.

Tasmanian Repair Estimates and Related Trade Rates for 2027

None of our Tasmanian guides publishes a figure for an appliance repair visit itself, so repairs are shown as priced on quote for 2027. Repairers usually work out that price after hearing the fault, checking the model and judging whether a part must be ordered in. Related trade work does carry 2027 estimates from the Tasmanian electrician pricing guide, and those help when a repair turns into a wiring job. An electrician's call-out including the first hour costs about $120 to $240, and further hours run about $95 to $145. After hours call-outs rise to roughly $200 to $450, while tracing a fault on a circuit is about $150 to $500, charged by the hour up to an agreed limit.

Gas work on the Tasmanian gas plumbing page is listed as labour only, with the customer buying and supplying the appliance. A gas appliance connection costs about $120 to $250, a gas cooktop installation about $180 to $350 and a gas safety inspection about $120 to $200. Fitting a gas heater runs about $300 to $800 in labour, which matters when a repair quote suggests replacing an old heater instead. A heat pump service costs roughly $150 to $300 per unit, and a new circuit for an induction cooktop is about $400 to $1,200. Every figure here is a 2027 estimate for typical Tasmanian homes in normal working hours, before travel to remote areas. Licensed trade work is usually billed on top of the repairer's own charges, so ask for both on one written quote.

Item 2027 TAS Estimate How It Is Charged What Changes the Price
Plug-in appliance repair Priced on quote Call-out plus parts and labour Fault, parts and travel
Sealed system fridge repair Priced on quote Diagnosis then fixed quote Refrigerant type and parts
Electrician call-out and first hour $120 - $240 Fixed call-out Distance and time of day
Electrician hourly rate $95 - $145 Per hour Length of the job
After hours electrical call-out $200 - $450 Fixed premium call-out Night, weekend or holiday
Electrical fault finding $150 - $500 Hourly with a limit How hard the fault is to trace
Dedicated heater or heat pump circuit $350 - $900 Per circuit Cable run and board space
Heat pump service $150 - $300 Per unit Indoor and outdoor access
Gas safety inspection $120 - $200 Per visit Number of gas appliances
Gas cooktop installation $180 - $350 Labour only Gas line and benchtop cut-out

Call-Out, Diagnosis and Parts on a Repair Quote

Most repair quotes start with a call-out fee, which pays for the trip to your home and the first part of the diagnosis. Diagnosis means testing parts such as elements, pumps, motors, door switches and control boards, the circuit boards that run the machine, until the faulty one is found. Some repairers include the call-out in the repair price if you go ahead, while others charge it separately either way. Ask which approach each business uses before booking, because two quotes with the same total can treat the call-out very differently. A visit that ends without a fix should still leave you with a written note of what was tested and what failed.

Parts vary in price more than any other line on a repair bill, and they depend heavily on the brand and age of the machine. Genuine parts come from the maker or its supplier, while compatible parts are made by other companies to fit the same model. Either kind can work well, but the quote should say which one is being fitted and how long it is covered. When a part has to be ordered, the repairer may leave the appliance unrepaired and return once the part arrives.

Lines on a Tasmanian Repair Quote

Line on the quote
What to check
Call-out
Whether it is credited if you go ahead
Diagnosis
What was tested and what was found
Parts
Genuine or compatible, and the cover period
Return visit
Whether travel is charged a second time
Licensed work
Electrician, gas-fitter or refrigerant technician named

Ask for the model and serial number to be written on the invoice.

Keep the old part if you may need to make a claim later.

Compare the call-out, parts and labour line by line, not just the bottom total.

Tasmania's Plug-and-Cord Rule for Repairers

Tasmania's electrical licensing regulations define electrical work broadly, covering circuits, fittings and the fixed wiring in a building. The same regulations then list work that is not electrical work, and one item on that list matters most for appliance repairs. Repairing an electrical appliance or device does not count as electrical work when it runs at 250 volts or less and was made to connect with a plug and cord. In plain terms, a washing machine, fridge, dryer, microwave or toaster that plugs into a normal power point can be repaired without an electrical licence. The wording is in the Occupational Licensing (Electrical Work) Regulations, which can be read on Tasmanian Legislation Online.

That rule does not mean every repairer is equally skilled, and it does not lower the safety standard of the finished job. A plug-in appliance that has been opened still needs to be safe to touch and use once it is closed up again. Good technicians test the earth wire, which carries stray current safely away, and the insulation after a repair, using a special meter. Ask how the repaired appliance will be tested before it is handed back. A clear answer suggests that the repairer takes electrical safety seriously, even where no licence is required. Keep the test result with the invoice, since it shows the appliance left the repairer in safe condition.

The same exclusions list also covers pushing a plug into a power point and fitting a plug or socket onto an extension cord. Those small tasks are not electrical work under the regulations, so a householder or a repairer may do them. Anything past the power point is a different matter, because the socket, the cable in the wall and the switchboard are part of the building's fixed wiring. If a plug-in appliance keeps tripping the safety switch, the device that cuts power when current leaks, the fault may be in the appliance or in the circuit it plugs into. Test the appliance on another circuit first, and call an electrician if the tripping continues with nothing plugged in.

Does the Plug-and-Cord Rule Apply?

Appliance
Who can repair it
Plug-in fridge or freezer
Appliance technician, plus refrigerant licence for the sealed system
Plug-in washer, dryer or dishwasher
Appliance technician
Microwave, toaster or coffee machine
Appliance technician
Hardwired oven or cooktop
Licensed electrician for the connection
Fixed electric water heater
Licensed electrician or a trade holding a limited electrical licence

The rule covers appliances and devices made to connect with a plug and cord.

It covers appliances running at 250 volts or less, which includes normal household power.

A power point, cable or switchboard fault is electrical work for a licensed electrician.

Hardwired Ovens, Cooktops and Water Heaters

Wall ovens, electric cooktops and hot water tanks are often wired straight into a circuit instead of using a plug. Work on that circuit, its fittings and the point where the appliance joins it counts as electrical work under the Tasmanian regulations. The appliance may still need an appliance technician for the internal fault, while a licensed person unhooks it from the power and connects it again. Many repairers work alongside a residential electrician in Tasmania for these jobs, or hold a licence that covers the connection themselves.

Tasmania also issues a restricted electrical licence, which lets people do limited electrical work so they can carry out their main trade. Holders can generally cut the power to a particular appliance, work on it and then connect it again. The licence classes include refrigeration and air conditioning, water heaters, gas appliances, motors, control devices and a class called composite equipment. A restricted licence holder does not need a separate business licence, called an electrical contractor licence, to take paid jobs within that limited work. Hot water faults are a common example, and the hot water electricians in Tasmania cover elements, thermostats and timers on electric systems.

A new appliance can also need more power than an older home's wiring can supply, so a repair talk becomes a wiring upgrade. Induction cooktops and large ovens use a lot of power, and a switchboard upgrade may be needed when the switchboard has no room for another circuit. A separate circuit used only by a heater or heat pump costs about $350 to $900 as a 2027 estimate, while an induction cooktop circuit runs about $400 to $1,200. An electrician can tell you whether the existing circuit is suitable before you buy a replacement. That check is cheaper than discovering the problem on installation day. Ask for the electrician's advice in writing, so the appliance supplier can see how much power the circuit can carry.

Appliance How It Connects Who Handles the Connection Who Fixes the Fault
Washing machine or dryer Plug and cord Householder plugs it in Appliance technician
Dishwasher on a cord Plug and cord, plus water Householder or plumber for water Appliance technician
Fridge or freezer Plug and cord Householder plugs it in Technician with refrigerant licence
Wall oven, hardwired Fixed circuit Licensed electrician Appliance technician or electrician
Electric cooktop, hardwired Fixed circuit Licensed electrician Appliance technician or electrician
Electric water heater Fixed circuit Licensed or restricted licence holder Water heater technician
Gas cooktop or oven Gas line and power Licensed gas-fitter Gas-fitter or authorised technician
Heat pump or split system Fixed circuit and refrigerant Licensed electrician Refrigerant licence holder

Gas Cookers and Heaters Under the Gas-Fitting Rules

Tasmania's gas-fitting regulations treat the repair, servicing and maintenance of a gas installation, the pipes and appliances using gas, as prescribed work, meaning work that only licensed people may do. A gas installation includes any appliance connected to it, so a gas cooktop, oven, space heater or hot water unit falls inside the rule. Servicing is defined as the work involved in maintaining or repairing a gas installation, which covers a burner clean as well as a part replacement. That means the person opening up a gas appliance should hold a gas-fitting licence. The rules are in the Occupational Licensing (Gas-fitting Work) Regulations, and the gas plumbers across Tasmania hold the licences involved.

A small number of gas jobs are outside the licensing rule, which is why a camping stove and a kitchen cooktop are treated so differently. Assembling and connecting a portable or mobile gas appliance supplied from a cylinder of 25 litres or less is not prescribed work. Connecting or disconnecting your own gas cylinder to fill, refill or swap it is also outside the rule. If you smell gas near any appliance, turn it off at the appliance and the cylinder or meter, open the windows and call a licensed gas-fitter.

Gas appliances also need power in many homes, for the spark that lights them, fans or electronic controls. When a gas heater or cooktop will not light, the fault could be in the gas supply, the spark igniter, the sensor that checks the flame or the power to the circuit board. A gas-fitter can test the gas pressure and how the burners work, while an appliance technician may diagnose the electronic side under the plug-and-cord rule. Ask the business you call which side of the fault it can handle. A gas safety inspection, at about $120 to $200 as a 2027 estimate, is a sensible first step for an older heater that smells or burns unevenly.

Gas Jobs and the Licence Rule

Gas job
Licence position
Repair or service of a gas cooktop, oven or heater
Yes, licensed gas-fitter
Converting an appliance to a different gas
Yes, licensed gas-fitter
Connecting a portable appliance to a small cylinder
No, if the cylinder is 25 litres or less
Swapping or refilling your own gas cylinder
No
Moving a fixed gas appliance
Yes, licensed gas-fitter

Servicing covers routine maintenance of a gas appliance as well as repair.

A gas installation includes the appliances connected to it.

Never remove a gas appliance panel yourself while the gas supply is on.

Fridges, Freezers and Heat Pumps With Refrigerant

Fridges, freezers, heat pumps and split systems move heat with refrigerant, a cooling gas sealed inside a loop of pipes. The Australian Refrigeration Council administers the national refrigerant handling licence, and it states that anyone who handles refrigerant or works on refrigeration and air conditioning equipment must hold one. Its definition of handling also includes taking equipment out of service or throwing it out while refrigerant is still inside. A technician who replaces a fridge compressor, the pump that drives the gas, fixes a gas leak or refills a heat pump therefore needs that licence. Simple repairs such as a door seal, a thermostat or a fan motor do not involve the sealed system at all. Knowing which kind of repair you need tells you which licence to ask about before the visit.

A heat pump that stops heating in a Tasmanian winter is an urgent job for most households, and the fault is often in the outdoor unit. Some faults are simple, such as a blocked filter, while others involve refrigerant leaks or failed circuit boards. A service at about $150 to $300 per unit, as a 2027 estimate, keeps filters, the metal cooling fins and drains clean between repairs. Heat pump repairs on the air conditioning repairs page cover the fixed outdoor unit, which also needs a licensed electrician for its circuit. A fridge or freezer repair, by contrast, usually stays with the appliance technician once the refrigerant side is checked.

Before you book a fridge repair, a few checks can rule out the simplest causes and save a call-out fee. Make sure there is clear space around the fridge for air to move, and listen for whether the compressor at the back is running. Check that the door seal grips evenly all the way round, and look for ice build-up on the back wall of the freezer, which can point to a fault in the automatic defrost system. Note what you find in your brief, so the repairer knows whether to bring refrigerant equipment or just a replacement part.

Fridge and Heat Pump Faults

Fault
Who usually handles it
Torn door seal
Appliance technician
Failed thermostat or fan
Appliance technician
Ice build-up from a defrost fault
Appliance technician
Compressor or refrigerant leak
Refrigerant licence holder
Heat pump not heating
Refrigerant licence holder and electrician

Refrigerant handling includes taking a unit out of service while it still holds refrigerant.

A door seal or fan repair leaves the sealed system closed.

Ask any technician working on the sealed cooling system for their refrigerant licence number.

Checking a Licence Now That CBOS Has Split

Consumer, Building and Occupational Services, known as CBOS, handled trade licensing and consumer affairs in Tasmania for many years. CBOS has since been split into Consumer Affairs Tasmania and Building Standards Tasmania, according to a notice on the former CBOS website. Older invoices, quotes and websites may still mention CBOS, which is not a sign that anything is wrong. Licences issued before the change remain the basis for checking an electrician or gas-fitter. When a repairer gives you a licence number, write it on the quote and check it with the relevant agency.

An electrical contractor licence is needed by anyone who enters into contracts to perform electrical work in Tasmania. The work a contracting business can take on is limited to what its named manager's personal licence covers. Contractors must hold insurance against injury or damage caused by their work or products of at least $5 million, and they send a certificate of that cover with their application. Gas-fitting has its own licence types for individual workers, businesses and provisional holders. Asking for the licence class, not just a number, tells you whether the person can do the work quoted. A business that quotes electrical and gas work together should be able to show the right licence for each part.

Appliance technicians who stay within the plug-and-cord rule do not need an electrical licence, so a licence number may not appear on their quote. In that case, an Australian Business Number, written terms and proof of insurance are the details to check instead. Ask how long the repair is covered and what happens if the same fault returns within that time. Ask whether the technician is approved by the maker, because authorised repairers can usually get genuine parts faster. A repairer who answers these questions in writing is easier to hold to account later.

Licence What It Covers When You Need It What to Ask
Electrical practitioner Electrical work on circuits and installations Hardwired appliances and power points Licence number and class
Electrical contractor Contracting to do electrical work Any business quoting electrical work Insurance certificate
Restricted electrical Unhook, work on and reconnect set equipment Water heaters, gas appliances, refrigeration Which restricted class is held
Gas-fitting practitioner Gas-fitting work including servicing Gas cooktops, ovens and heaters Licence number and category
Gas-fitting contractor Contracting to do gas-fitting work Any business quoting gas work Business name on the licence
Refrigerant handling Cooling gas and air conditioning equipment Sealed system fridge and heat pump work Licence number
No licence needed Repairs under the plug-and-cord rule Plug-in appliances at household voltage ABN, insurance and written terms

When a Fairly New Appliance Breaks Down

The consumer guarantees under the Australian Consumer Law apply automatically when you buy an appliance, and a business cannot take them away. The Australian Competition and Consumer Commission says these rights can last longer than any warranty offered by the seller or the maker. They apply for a period that is reasonable for the type of product, its price and how it is likely to be used. Check this before paying a private repairer, because a paid repair can make a later claim harder to argue.

The ACCC separates faults into major and minor problems, and the difference decides who chooses the fix. A major problem is one that would have stopped a buyer from buying if they had known, or one that makes the product unsafe or unusable for its normal purpose. With a major problem, you can choose a refund or a replacement of the same type. With a minor problem, the business can choose to repair the product, as long as it does so free of charge and within a reasonable time. What counts as reasonable depends on the product, and repairing an installed dishwasher may take longer than a quick in-store fix.

Write down when the fault started, what the appliance was doing and how you have used it since the purchase. Keep the receipt, a bank statement or another proof of purchase, along with any warranty card or registration email. Contact the seller first and explain the problem in writing, so there is a record of the date and the response. A clear, calm message that asks for a specific fix usually gets a faster reply than a phone call. If the seller does not respond, follow up in writing with a date by which you expect an answer. Note the name of each person you speak with, along with the date and what they said.

Before You Pay for a Repair

Question
Why it matters
Age of the appliance
A reasonable period may outlast the warranty
Major or minor fault
It decides who chooses the fix
Proof of purchase
The seller will ask for it
Earlier repairs by others
Earlier work can complicate a claim
Normal use
Misuse is not covered

Consumer guarantees are automatic and cannot be removed.

A warranty is an extra promise on top of them.

Contact the seller in writing before booking a paid repair on a fairly new appliance.

Seller, Maker or Repairer: Who Covers the Fix

The seller is the main contact when a product does not meet the consumer guarantees, such as acceptable quality or being fit for the purpose it was sold for. The ACCC says a business cannot refuse to help by telling you to contact the manufacturer instead. Guidance published on the former CBOS website adds that it is generally the supplier's responsibility to return products to the manufacturer for repair. You can also make a claim against the manufacturer directly in some situations, such as when an appliance does not match its description. Choose the route that gives the quickest fix, and keep a copy of every message.

Makers and importers have their own duty to keep spare parts and repair services available. The ACCC says they must provide spare parts and repair facilities for a reasonable time after purchase, even when you bought from a retailer. That duty does not apply if you were told at the time of sale that parts or repairs would stop after a set period. Ask your repairer whether parts for your model are still available before agreeing to a diagnosis fee.

Large appliances also raise a practical question about who moves them. The ACCC says businesses are responsible for collecting faulty products that are large or hard to return, including installed appliances. If the business inspects the appliance and finds no fault, it can charge you for collection and inspection. It must give you a reasonable estimate of that cost before going ahead. Photos and a written fault history make a no-fault finding less likely, because they show what you saw at home.

Situation Who to Contact Who Pays Note
Minor fault within a reasonable period Seller Seller Seller may choose to repair
Major fault within a reasonable period Seller Seller You choose refund or replacement
No spare parts available Seller, then maker Maker or importer Unless you were told at sale
Large installed appliance Seller Seller collects it No-fault finding may be charged
Damage from misuse Private repairer You Not covered by guarantees
Appliance well past a reasonable life Private repairer You Compare repair cost with value
Damage after a network outage TasNetworks claim Depends on the claim Repair report needed

Repair Notices, Refurbished Parts and Lost Settings

A repair notice is a written warning a business must give in certain situations before it repairs your product. The ACCC says businesses may use refurbished parts when repairing products, and they must warn you of this through a repair notice. The same applies to replacing a faulty product with a refurbished one of the same type. Read the notice before signing, and ask whether a new part is available at a different price. Some owners prefer new parts on a fairly new appliance, while others accept refurbished parts to save time. Either way, the choice should be yours, made with the notice in hand.

The ACCC also notes that repairs to some electronic goods can wipe stored data, and that businesses must warn you about this in a repair notice. Modern appliances store more information than many owners realise. Smart fridges, washing machines with saved programs and ovens linked to an app may lose their settings or connections after a new circuit board is fitted. Write down your favourite programs, Wi-Fi details and any custom settings before the repair. That way you can restore them quickly once the appliance is working again.

Reading a Repair Notice

Item on the notice
What it tells you
Refurbished parts
Used parts may be fitted instead of new ones
Refurbished replacement
The product may be swapped for a refurbished one
Data loss
Stored settings or programs may be wiped
Business details
Who is responsible for the repair

Ask whether new parts are available as an alternative.

Write down saved programs and network details before handing it over.

Read and keep the repair notice before you agree to the repair going ahead.

Appliances Damaged During a TasNetworks Outage

Storms, falling trees and network faults sometimes leave appliances damaged after the power goes off and comes back. TasNetworks runs the electricity network across the state and takes claims from customers who believe its network caused loss or damage. It asks claimants to include costs such as receipts, invoices or quotes, repair reports from qualified repairers and photographs of the damage. It also asks customers to keep damaged items until the claim is finalised, which makes a repairer's written report an important part of the claim, so ask for one before any part is thrown away.

TasNetworks says it cannot compensate customers for loss or damage caused by other people or companies or by events outside its control. If you repair items yourself before the claim is decided, it says that is at your own expense. If a claim is denied, you can supply more evidence for a fresh investigation or contact the Energy Ombudsman Tasmania. The Ombudsman is an independent body that helps settle complaints from electricity and natural gas customers in Tasmania. Home insurance may also cover storm or power surge damage, so check your policy at the same time.

Some appliances are not broken after an outage at all, and simply need resetting. Ovens and microwaves may show a flashing clock, while some heat pumps and dishwashers wait for a button press before restarting. Check whether the safety switch on the switchboard has tripped, then try one appliance at a time before booking a repair. If several appliances fail together, or power points smell burnt, call an electrician through the emergency electrician page and leave the appliances unplugged. TasNetworks takes faults and emergencies on 132 004, and anyone in danger should call 000. Stay well clear of any fallen powerline, and report it to TasNetworks from a safe distance.

Evidence Who Provides It Why It Matters Keep Until
Repair report Qualified repairer Shows the cause and the cost Claim is finalised
Receipts and invoices You and the repairer Prove the cost of the damage Claim is finalised
Photos of the damage You Show the condition before repair Claim is finalised
Damaged items You TasNetworks may ask to inspect them Claim is finalised
Insurance letter TasNetworks on request Confirms a recorded incident Insurance claim ends

Reporting an Unsafe Appliance in Tasmania

An appliance that sparks, smokes, gives a shock or overheats should be switched off at the wall and unplugged straight away. Guidance published on the former CBOS website says injuries from a product should be reported to the store where it was bought. A product that has caused a serious injury or a near miss can be reported to the Tasmanian Government helpline on 1300 654 499. The ACCC also takes reports of products that seem unsafe. Keep the appliance and its packaging, because the seller or a regulator may want to inspect it.

Check whether the model is under a product recall before booking a paid repair, because recalled appliances are often fixed or replaced free of charge. Ask the seller or the maker whether your model is affected, using the model and serial number from the rating plate. A recall repair should be arranged through the maker or the seller, not a private repairer. An electrical safety inspection can check the rest of the home if a faulty appliance has damaged wiring or tripped circuits.

Getting Rid of a Dead Fridge, Washer or Microwave

When a repair is not worth doing, the old appliance still has to go somewhere, and Tasmanian councils treat fridges differently from other goods. The City of Hobart charges separate fees at its McRobies Gully tip for fridges and freezers that have been degassed, meaning the refrigerant has been removed. When we checked, a degassed fridge or freezer cost $37.50 with a degassing certificate, and a fridge that had not been degassed cost $47.50. Fees change, so confirm the current figure with your council before you load the trailer. A licensed refrigerant technician can tell you whether degassing before disposal is worthwhile.

Electronic waste, or e-waste, is handled under separate rules from large appliances at many Tasmanian sites. Hobart's tip accepts e-waste free of charge, but its list excludes household appliances such as coffee machines, toasters, microwaves and kettles. Launceston's sorting guide treats whitegoods, large appliances such as washers, as scrap metal, except fridges, which must go to the Launceston transfer station. The Huon Valley lists kitchen and household appliances among items not currently accepted for recycling at its e-waste points. Rules differ between councils, so check with your local council or transfer station, the council rubbish drop-off site, before you take anything. Some sites charge by weight or by item, and the rates can differ between a transfer station and a main tip.

Before disposal, remove any shelves, food and detergent, and tape doors shut so children cannot climb inside. Unplug and coil the power cord, and drain washing machines and dishwashers so water does not spill in a car or trailer. If the appliance is being replaced, ask whether the new installer will take the old one away and what that costs. Record the old model and serial number in case a later claim or recall notice needs them. A quick phone call to the site before loading the trailer avoids a wasted trip.

Item Where It Goes What to Check Who Can Help
Fridge or freezer Council tip or transfer station Degassing certificate and fee Refrigerant licence holder
Washing machine or dryer Scrap metal at many sites Council rules for whitegoods Local council
Dishwasher Scrap metal at many sites Drained and doors taped Local council
Microwave or toaster Not always free e-waste Check household appliance rules Local council
Television or computer E-waste collection point Which sites accept screens Local council
Heat pump Decommissioned by a technician Refrigerant recovered first Refrigerant licence holder

Makers Whose Appliances Tasmanian Repairers See

Westinghouse makes fridges, freezers, ovens, cooktops, dishwashers, washing machines and dryers, for kitchens and laundries alike. Electrolux makes washing machines, dryers, fridges, freezers, dishwashers and stick and robot vacuums. Fisher & Paykel makes refrigerators, ovens, cooktops, DishDrawer dishwashers, washing machines and dryers, and it sells spare parts through its Australian site. Haier makes refrigerators, freezers, washing machines, dryers, dishwashers and cooking appliances.

Samsung makes refrigerators, washers, washer dryers, tumble dryers, ovens and dishwashers for Australian homes. LG makes fridge freezers, front load and top load washing machines, heat pump dryers and dishwashers. Bosch makes dishwashers, washing machines, dryers, ovens and fridges, along with vacuum cleaners and coffee machines. Miele makes washing machines, tumble dryers, dishwashers, ovens, steam ovens and vacuum cleaners. For a warranty job, ask the maker or seller which repairers it authorises before you book anyone.

Smeg makes ovens, cooktops, dishwashers, refrigerators and laundry appliances, as well as toasters, kettles and coffee machines. ASKO makes built-in dishwashers, front-loading washing machines and heat pump tumble dryers. Breville makes espresso machines, coffee grinders, toasters, blenders and benchtop ovens. Dyson makes vacuums, air purifiers and hair care tools, and Panasonic makes microwave ovens, rice cookers and air conditioners. Rinnai makes heating, hot water and air conditioning products, and its gas units need a licensed gas-fitter, as do the gas systems handled by hot water plumbers. Naming the maker in your brief lets a repairer check parts availability before the visit.

Maker Appliances Made Parts Often Checked Who Repairs It
Westinghouse Fridges, ovens, laundry, dishwashers Cooling, elements, drainage Appliance technician
Fisher & Paykel Fridges, DishDrawer, laundry, cooking Drawer seals, pumps, boards Appliance technician
Samsung Fridges, laundry, ovens, dishwashers Ice makers, drum bearings Appliance technician
LG Fridge freezers, laundry, dishwashers Error codes, pumps Appliance technician
Bosch Dishwashers, laundry, ovens Drainage, heating faults Appliance technician
Miele Laundry, dishwashers, ovens, vacuums Programs, pumps, seals Appliance technician
Rinnai Heating, hot water, air conditioning Ignition and burner faults Licensed gas-fitter
Breville Coffee machines, toasters, blenders Pumps, scale, heating Small appliance repairer

What to Look Out For Before a Repairer Opens It Up

Be wary of any repairer who quotes a large fixed price over the phone without asking for the model or the fault. A fair quote is built on the brand, model, age and symptoms, and it usually separates the call-out from the repair. Watch for pressure to replace an appliance on the spot, especially when the business also sells new machines. A careful repairer explains what has failed and gives you time to decide. Ask for the old part back if you want to see what was replaced.

Licensed work is another area where quotes can be unclear, especially on gas appliances and hardwired ovens. A repairer who offers to disconnect a gas cooktop or rewire an oven should be able to give a licence number on the spot. If the answer is vague, book the licensed part separately with a gas-fitter or electrician. Sealed system work on a fridge or heat pump needs a refrigerant handling licence, and a technician should not object to being asked for it.

Finally, check that the quote covers what happens if the same fault returns soon after the repair. A written period of cover for parts and labour protects you more than a verbal promise. The consumer guarantees also apply to repair services, which must be done with due care and skill, meaning reasonable care and competence. If a repair fails soon after, contact the repairer in writing first and give them the chance to fix it. Keep the invoice, the repair notice and any photos together, so the history is easy to show.

Warning Signs in a Repair Quote

Sign
What to do
Fixed price before any details
Send the model and fault in writing first
Pressure to replace on the spot
Ask for the diagnosis in writing
No licence for gas or hardwired work
Book a licensed gas-fitter or electrician
No mention of parts type
Ask if parts are genuine or compatible
No cover on the repair
Ask for written cover on parts and labour

A diagnosis in writing helps if you later make a claim.

Compare at least two quotes for any large repair.

Do not pay a repairer for a fault the seller should fix under the consumer guarantees.

Getting Appliance Repair Quotes Tasmanian Repairers Can Price Alike

A good brief lets every repairer price the same job, which makes the quotes easy to compare. Include the brand, model and serial number from the rating plate, the age of the appliance and how it is connected. Describe the fault in plain words, add any error code and say when the problem started. Mention whether the appliance is under warranty, has been repaired before or was affected by a storm or outage. Electricians in the larger centres, such as electricians in Hobart and Launceston electricians, can follow up if the fault is in the wiring. Photos of the rating plate and the fault save a lot of repeated messages.

Location also affects the quote, because repairers often charge travel for homes well away from their base. Homes on the North West Coast can reach electricians in Devonport and Burnie for wiring faults, while appliance repairers set their own service areas. Shacks, farms and island homes may need a longer booking window, so say how flexible you can be. Ask whether the repairer carries common parts in the van, because that can save a second trip. A clear address and access notes, such as stairs or a tight laundry, help the business plan the visit.

Kitchen jobs often happen together, and an oven repair can be a good time to book a deep clean as well. A single oven clean costs about $110 to $180 as a 2027 estimate in our oven cleaning guide for Tasmania. If wiring problems show up during the repair, an electrical repairs specialist can fix the circuit. Keep every quote, invoice and repair notice in one folder, along with the receipt for the appliance.

Appliance Repairers Across TAS

The estimates on this page apply across Tasmania, while each repair visit is priced on quote for the appliance and fault. Homes near a repairer's base rarely carry a travel line, while remote farms, the West Coast and the Bass Strait islands usually do.

▶ Hobart 30 areas
Hobart CBD Battery Point Sandy Bay South Hobart West Hobart North Hobart New Town Lenah Valley Mount Stuart Moonah Glenorchy Claremont Berriedale Rosetta Montrose Bellerive Howrah Lindisfarne Rosny Park Lauderdale Sandford Kingston Blackmans Bay Taroona Margate Brighton Bridgewater Sorell Richmond New Norfolk
▶ Launceston 26 areas
Launceston CBD East Launceston West Launceston South Launceston Newstead Norwood Kings Meadows Youngtown Prospect Riverside Trevallyn Summerhill Legana Grindelwald Exeter Beaconsfield Beauty Point Rosevears Hadspen Carrick Longford Perth Evandale Scottsdale Lilydale George Town
▶ Devonport & Burnie 26 areas
Devonport East Devonport Spreyton Miandetta Latrobe Port Sorell Shearwater Hawley Beach Ulverstone Turners Beach Penguin Burnie Somerset Wynyard Boat Harbour Sisters Beach Stanley Smithton Wivenhoe Cooee Park Grove Montello Sheffield Railton Westbury Deloraine
▶ Huon Valley 22 areas
Huonville Ranelagh Franklin Port Huon Geeveston Dover Southport Cygnet Lymington Gardners Bay Woodbridge Middleton Snug Kettering Bruny Island Alonnah Grove Glen Huon Judbury Lower Longley Leslie Vale Pelverata
▶ East Coast 22 areas
St Helens Scamander Beaumaris Binalong Bay Stieglitz Pyengana Fingal Mathinna Bicheno Coles Bay Swansea Orford Triabunna Maria Island Buckland Dolphin Sands Cranbrook Apslawn Seymour Falmouth Four Mile Creek Gray

Tasmanian Appliance Repair FAQ

Can anyone repair my plug-in washing machine in Tasmania?
Repair work on an appliance made to connect with a plug and cord, running at 250 volts or less, is not electrical work under the state's regulations. That means an appliance technician can repair a plug-in washing machine without an electrical licence. The power point and the circuit behind it are still licensed electrical work. Choose a repairer who tests the machine for electrical safety before handing it back.
Who should repair a gas cooktop or gas heater?
Repairing, servicing or maintaining a gas installation is prescribed work, meaning only licensed people may do it, under Tasmania's gas-fitting regulations. A gas installation includes the appliances connected to it, so a licensed gas-fitter should do the work. Connecting a portable appliance to a cylinder of 25 litres or less is an exception. Fixed cooktops, ovens and heaters stay licensed work.
Does a fridge repairer need a special licence?
A technician who works on the sealed cooling system needs a licence to handle refrigerant, the cooling gas, from the Australian Refrigeration Council. That covers compressor replacements, leak repairs and refilling the cooling gas. Simple jobs such as a door seal or a thermostat do not open the sealed system. Ask for the licence number whenever refrigerant is involved.
My oven stopped working after a storm. What should I do?
Check the safety switch on the switchboard and reset any tripped circuits, then try the oven again. If it still fails, ask a qualified repairer for a written report on the cause and the cost. TasNetworks asks claimants for repair reports, receipts and photos, and to keep damaged items until the claim is finalised. Check your home insurance policy at the same time.
Is my appliance still covered once the warranty ends?
It may be, because the consumer guarantees can last longer than any warranty. They apply for a period that is reasonable for the type of product, its price and its likely use. Contact the seller in writing and explain the fault before paying for a private repair. Keep your proof of purchase ready, because the seller will ask for it.
What happened to CBOS?
CBOS, the former Tasmanian licensing and consumer office, has been split into Consumer Affairs Tasmania and Building Standards Tasmania. Older quotes and websites may still use the CBOS name. Licences issued before the change are still the basis for checking a trade. Write any licence number on your quote and check it with the relevant agency.
Can the seller send me to the manufacturer instead?
The ACCC says a business cannot refuse to help by telling you to contact the manufacturer. The main exception is when spare parts or repair facilities are not available within a reasonable time. In that case the seller may direct you to the maker or importer. Keep a written record of each step, including dates and names.
Who pays to collect a large faulty appliance?
The ACCC says businesses are responsible for collecting faulty products that are large or hard to return, including installed appliances. If the business finds no fault, it can charge for collection and inspection. It must give you a reasonable estimate of that cost first. Photos and a written fault history help support your claim.
How do I get rid of an old fridge in Hobart?
The City of Hobart tip charges different fees for fridges that have been degassed, meaning the cooling gas was removed, and those that have not. When we checked, a degassed unit with a certificate cost less than one that still held refrigerant. Fees change, so confirm the current amount with the council before you go. A licensed refrigerant technician can advise on degassing before disposal.
What should I include when asking for repair quotes?
Give the brand, model and serial number from the rating plate, along with the appliance's age. Describe the fault, any error code and how the appliance connects to power or gas. Mention any warranty, earlier repairs or storm damage. Add photos so every repairer prices the same job.

Appliance and Licensed Trade Specialists TAS

For Trades & Contractors - TAS

Appliance repairs often lead to licensed work on the same home. Electricians handle hardwired connections and circuits, gas-fitters service gas appliances, and refrigeration technicians work on heat pumps. Tasmanian households can book any of these services alongside an appliance repair.

Compare Appliance Repair Quotes

Tell us your town, the appliance, its model and what it is doing wrong, then compare quotes from local Tasmanian repairers pricing the same fault.

Get Free Appliance Repair Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

We service all regions including Hobart, Launceston, and regional areas. Verify licences at CBOS Tasmania.
Prices are 2027 estimates for typical Tasmanian homes, drawn from our Tasmanian electrical, gas and oven cleaning guides. Appliance repair visits themselves are priced on quote, so compare written quotes that list the call-out, diagnosis, parts, labour, travel and any licensed work separately.
Need work done? Get free quotes. Post a Job – It's Free