Appliance Broken in WA?

Tell us your suburb or town, the appliance brand and model, and what the fault looks like. We will pass that description to local appliance technicians across Western Australia, so every quote you receive prices the same repair.

Get Free Appliance Repair Quotes

Appliance Repair Prices Across WA

Electrician call-out, Perth metro$80 - $130
Call-out plus first hour, metro$170 - $280
Hourly labour, Perth metro$90 - $150
Fault finding, first hour$140 - $280
After-hours attendance$200 - $540
Gas call-out, Perth metro$80 - $180
Gas appliance service, each$150 - $300
Replacement plug fitted$25 - $55
Regional travel zone fee$50 - $220
Replacement partsPriced on quote

These are 2027 estimates drawn from WA trade price guides for typical homes. Parts, labour time, after-hours work and travel to regional towns all change the final figure, so compare written quotes line by line.

Appliance Repair Services WA - Get Local Quotes

Appliance repair in Western Australia covers the fridges, washing machines, dryers, dishwashers, ovens, cooktops and benchtop machines that most homes rely on every day. Who may repair each one depends on how it gets its power, because WA law treats a plug-in machine, a wired-in oven and a gas cooker differently. Swapping a faulty part in a plug-in appliance for a matching one needs no electrical licence, but cooking appliances wired into the house need a licensed person. Wall ovens can be repaired by a technician holding a restricted licence, which covers appliance work only, while any change to the house wiring needs an electrician. Gas repairs need a licensed gasfitter, and opening the sealed pipes holding a fridge's cooling gas, called refrigerant, needs a refrigerant licence. Before paying for a visit, check whether the fix should be free, since the seller of a faulty appliance may have to repair, replace or refund it. Tenants usually report a broken appliance to the landlord in writing instead of booking a technician themselves. In country towns, hard water and long freight times also affect what a repair costs and how quickly it is finished. Replacement parts are priced on quote in WA, while call-out, labour and travel figures come from WA trade price guides. The prices on this page are 2027 estimates for homes in Perth and regional towns. Post your job on The Quote Yard and we will connect you with local appliance technicians across Western Australia who can quote on it.

Appliance Technicians Around Western Australia

Appliance technicians, electricians and gasfitters work in homes, rentals and holiday houses from the Perth suburbs to the Pilbara and the South Coast. We can connect you with local repairers who all price the same written description of your appliance and its fault.

Get Free Quotes

Appliance Repair Costs at a Glance, WA 2027

Job Price Range How It Is Charged What Moves the Price Who Can Do It
Call-out, Perth metro $80 - $130 Per visit Suburb and time of day Appliance technician or electrician
Call-out plus first hour $170 - $280 Per visit Hours on site Appliance technician or electrician
Fault finding, first hour $140 - $280 Hourly How hidden the fault is Licensed electrician
After-hours attendance $200 - $540 Per visit, before work Evening, weekend or holiday Licensed electrician
Gas appliance service $150 - $300 Per appliance Appliance type and age Licensed gasfitter
Gas leak detection and repair $200 - $600 Per job Where the leak sits Licensed gasfitter
Replacement plug fitted $25 - $55 Per item Plug type and rating Technician or tester
Replacement lead fitted $35 - $75 Per item Cord length and rating Technician or tester
Washer, dryer or dishwasher part Priced on quote Part plus labour Part price and freight Appliance technician
Fridge cooling gas and pipe work Priced on quote Part, refrigerant and labour Cooling gas and compressor ARC licence holder
Hardwired oven element or thermostat Priced on quote Part plus labour Model and part supply Restricted licence holder or electrician

What Adds to an Appliance Repair Bill

What is involved
A diagnosis visit to find the failed part, charged even when you decide not to repair.
Parts ordered in from a distant warehouse, which can mean freight and a second visit.
Evening, weekend or public holiday attendance, which carries a higher attendance charge.
Travel or a zone fee for homes outside the Perth metropolitan area.
Ask every technician to list the call-out, diagnosis, each part, labour time and any travel fee on separate lines.

Who Fixes What When an Appliance Breaks in WA

Most broken appliances in Western Australian homes fall into three groups, and each group has its own rules about who may repair it. Plug-in machines such as washing machines, dryers, fridges, microwaves and coffee makers connect through a cord and a plug at the power point. Hardwired appliances, including most wall ovens and electric cooktops, connect straight to the permanent wiring of the house, often through a wall switch that cuts their power. Gas cookers, gas heaters and gas cooktops add a third set of rules, because the gas side of the job has its own rules, separate from the electrical side. Knowing which group your appliance belongs to tells you what kind of technician to ask for before you request a single quote.

A repair visit usually starts with a diagnosis, where the technician tests the machine and finds the part that has failed. The quote that follows should name that part, the labour time and any travel, so you can weigh the cost against buying new. New appliances and their connection costs are compared under appliance installation in WA, which helps when a repair bill comes close to a replacement. Faults in the wiring behind an appliance belong to a local electrician, and the sections below explain how to tell the two apart.

What Appliance Repairs Cost in WA in 2027

WA price guides on The Quote Yard give figures for visiting, diagnosing and travelling, while the price of each replacement part is left to the quote. For 2027, a standard electrician call-out in metropolitan Perth costs about $80 to $130, with hourly labour at about $90 to $150. A call-out with the first hour of work included comes to roughly $170 to $280 across the metro area. Tracing a fault that is not obvious costs about $140 to $280 for the first hour, according to the WA electrician pricing guide. A visit in the evening, at a weekend or on a public holiday costs about $200 to $540 before any work begins. Parts for washing machines, dryers, dishwashers, fridges and ovens have no WA figure in these guides, so each one is priced on quote.

Gas appliances are priced separately, since the work is done by a licensed gasfitter instead of an electrician. A gas call-out in metropolitan Perth costs about $80 to $180, and a routine service costs about $150 to $300 per appliance. Gas leak detection and repair runs from about $200 to $600, with the price depending on where the leak is found. Small cord and plug jobs are the cheapest, with a replacement plug fitted for about $25 to $55 and a new lead for about $35 to $75. Every figure here is a 2027 estimate for normal working hours, before parts, freight or regional travel are added.

Item 2027 WA Estimate How It Is Charged What Changes the Price
Call-out, Perth metro $80 - $130 Per visit Suburb and booking time
Call-out plus first hour $170 - $280 Per visit Time spent on site
Hourly labour, Perth metro $90 - $150 Per hour Second technician or heavy lifting
Fault finding, first hour $140 - $280 Hourly Intermittent or hidden faults
After-hours attendance $200 - $540 Per visit, before work Evening, weekend or public holiday
Gas call-out, Perth metro $80 - $180 Per visit Distance and urgency
Gas appliance service $150 - $300 Per appliance Heater, cooktop or oven
Gas leak detection and repair $200 - $600 Per job Access to the leaking fitting
Replacement plug fitted $25 - $55 Per item Plug type and rating
Replacement lead fitted $35 - $75 Per item Cord length and rating
Microwave leakage test on its own $15 - $30 Per oven, plus a minimum charge Number of ovens tested
Replacement parts Priced on quote Per part Brand, model and freight

Repair Costs in Regional and Remote WA Towns

Technicians based in Perth often add a travel charge or a zone fee, a flat fee for distance, once a job is outside the metropolitan area. The WA electrician pricing guide puts a regional travel zone fee at about $50 to $220, and some businesses bill travel time hourly instead. Regional call-outs vary by town, from about $90 to $130 around Bunbury, Busselton and Margaret River to $140 to $200 in the Pilbara. Booking two or three appliance jobs for one visit spreads that travel cost across more work.

In remote towns, the wait for a part can matter more than its price, since many spares travel by road freight from distant warehouses. Ask the technician whether the part is in stock, how long freight usually takes and whether a second trip will be charged when it arrives. A written fault report from the first visit lets you compare the repair against a replacement while you wait for the part. Ask whether the technician carries common parts for your brand in the van, since that can avoid a second trip. Households in Kalgoorlie-Boulder, Broome or Kununurra should expect call-outs well above metro rates, as the table below shows. Town-by-town electrician rates are compared in the guides for the South West and the Great Southern.

Area Call-Out Estimate Hourly Estimate Travel Note
Perth metropolitan area $80 - $130 $90 - $150 Metro rates apply
Mandurah and Peel $90 - $130 $100 - $145 Close to metro rates
Bunbury, Busselton and Margaret River $90 - $130 $105 - $150 Local technicians often available
Albany and the Great Southern $95 - $135 $108 - $152 Parts may need freight
Geraldton and the Mid West $100 - $140 $110 - $160 Zone fee may apply
Kalgoorlie-Boulder and the Goldfields $110 - $155 $120 - $180 Zone fee may apply
Esperance and the South Coast $100 - $145 $110 - $160 Parts may need freight
Karratha and the Pilbara $140 - $200 $150 - $250 Book jobs together
Broome and the Kimberley $130 - $185 $140 - $220 Allow time for parts

Who Can Repair a Plug-In Appliance in WA

WA's electrical licensing rules are set out in the Electricity (Licensing) Regulations 1991, published on the Western Australian Legislation website. Those regulations say electrical work above 50 volts generally needs a licence, then list some tasks that do not. One exemption, a written exception to that rule, covers testing and servicing appliances that connect by a plug and flexible cord, which takes in most washing machines, dryers, fridges and microwaves. Servicing is defined narrowly as finding a faulty part and replacing it with one built to the same or almost the same technical standard. Fitting a plug, or the socket end of an extension lead, to a flexible cord is also listed among the tasks that need no electrical licence. Those exemptions explain why many plug-in appliance technicians in WA work without holding an electrician's licence.

The exemption has limits that matter when you choose a technician. Fitting a part with a different power rating, changing the design or rewiring the power point behind the machine is not servicing under that definition. The Department of Fire and Emergency Services (DFES) also warns that installing or repairing any electrical component or appliance yourself is very dangerous. A trained technician tests the machine after the repair, and you can request a written record of the parts replaced and the test result.

Testing and tagging is a separate safety check where a portable appliance is inspected, electrically tested and labelled with the test date. It is mostly a workplace practice, though a household can still book it for a home office or a shared house full of older appliances. A test that fails because of a damaged cord or plug often leads to a quick repair, priced in the WA test and tag cost guide at about $25 to $55 for a plug. Microwave ovens can also be checked for leakage around the door seal, at about $15 to $30 per oven when the test is booked on its own. Booking microwave leakage testing suits a staff kitchen or a shared house where one microwave gets heavy daily use.

What the Servicing Exemption Covers

Task
Licence position
Finding the faulty part in a plug-in appliance
Covered by the servicing exemption
Swapping a part for a matching one
Covered by the servicing exemption
Fitting a new plug to a flexible cord
Listed as needing no licence
Work on the fixed wiring or power point
Licensed electrician only

Plug-in means the appliance connects through a cord and a plug.

Gas work and refrigerant work have separate licence rules of their own.

Ask the technician to name each replaced part and confirm it matches the original specification.

Who Can Repair a Wired-In Oven or Cooktop

Wall ovens, electric cooktops and some freestanding stoves are wired straight into a house circuit, so the plug-in exemption does not apply to them. Building and Energy, the WA Government division that licenses electrical and gas workers, issues a restricted electrical licence for domestic electrical appliances, a limited licence for appliance work only. Its holder may disconnect and reconnect household cooking appliances wired into the house at up to 240 volts, and replace faulty parts with matching ones. The licence covers stoves, ovens, hot plates, steamers, warmers and convection ovens, and its holder must make sure the equipment is safe to operate. It does not allow the holder to install or change the permanent house wiring, which stays with a licensed electrician.

Applicants for that restricted licence need a trade certificate marked Electrical Appliance Service Person or a recent Certificate III in Appliance Service. In practice, a trained appliance technician holding it can replace a failed element, thermostat or fan motor in a hardwired oven without being a full electrician. Moving the oven to a new cavity, adding a circuit or upgrading the cable is wiring work, and the restricted licence does not cover it. A separate circuit just for the oven and cooktop costs about $520 to $1,400 as a 2027 estimate, which is worth knowing before swapping an older unit for a larger one. Connection costs for a like-for-like swap are set out under oven and cooktop installation in WA. Grease-damaged extraction fans often come up during an oven repair, and replacement units are priced under rangehood installation.

Appliance How It Connects Who Repairs It Licence Basis
Washing machine Plug and cord Appliance technician Servicing exemption
Clothes dryer Plug and cord Appliance technician Servicing exemption
Fridge, electrical fault Plug and cord Appliance technician Servicing exemption
Fridge, sealed cooling system Plug and cord ARC licence holder Refrigerant handling licence
Wall oven or electric cooktop Fixed wiring Restricted licence holder or electrician Restricted electrical licence
Gas cooktop or gas oven Gas supply, sometimes with a plug Licensed gasfitter Gasfitting licence
Power point or circuit Fixed wiring Licensed electrician Electrical licence
Hot water system Fixed wiring or gas Electrician or gasfitter Depends on the energy source

When the Problem Is the House Wiring, Not the Appliance

Some faults that look like a broken appliance turn out to be in the house wiring, the power point or the switchboard. A residual current device (RCD), also called a safety switch, cuts the power immediately when it senses electricity leaking where it should not, such as through a person. When an RCD switches off every time one machine starts, the fault may well lie in that appliance's element, motor or cord. When it switches off with everything unplugged, the problem is likely in the house wiring, and only a licensed electrician may work on it.

Building and Energy states that it is illegal for an unlicensed person to carry out electrical work, including changes to fixed wiring. A licensed electrical business has a contractor licence number starting with EC, while each individual electrician's own number starts with EW. After most electrical work, the contractor must give you an electrical safety certificate, a signed record that the work is safe, within 28 days, though maintenance and like-for-like replacements are excluded. Both kinds of licence can be checked on the online licence search linked from the WA Government website. Tracking down a wiring fault is priced under electrical fault finding, while safety switch checks are covered by RCD testing.

WA rules require landlords to have RCDs installed in the switchboards of rental homes, and a faulty RCD must be replaced straight away. Building and Energy advises testing each RCD as the maker directs or at least every three months, whichever is more frequent. If a test fails, the advice is to call a licensed electrical contractor instead of continuing to use that circuit. Power boards and double adaptors can also cause trouble when a kitchen runs several power-hungry machines at once. DFES advises plugging those appliances straight into wall power points and never stacking one plug on top of another in a socket. Extra outlets for a busy kitchen or laundry are priced under power point installation in WA.

Symptom Likely Source First Check Who to Call
Safety switch trips when one machine starts That appliance Unplug it and reset the switch Appliance technician
Safety switch trips with everything unplugged Fixed wiring or a circuit Leave it off and note what happened Licensed electrician
Power point feels warm or smells hot Power point or plug Stop using the outlet Licensed electrician
Appliance dead, other outlets working Appliance cord, fuse or board Try another power point Appliance technician
Oven dead, cooktop working Oven element, thermostat or control Check the clock and oven settings Restricted licence holder
Lights dim when the dryer runs Circuit load or wiring Run the dryer on its own Licensed electrician

Getting Gas Cookers and Heaters Repaired Safely

Building and Energy tells households to always use a licensed gas fitter for installations, repairs or renovations involving gas work. That covers burners, valves, thermocouples (small sensors that shut the gas off when a flame goes out), regulators that control gas pressure, and gas connections. A gas cooktop with electric ignition may still have a plug, yet the gas side of any repair stays with the licensed fitter. After gas work other than servicing, the fitter must give a Notice of Completion, a form confirming the work is safe and legal, to you and the gas supplier within 48 hours. The WA gas fitting guide explains the types of gas licence and the safety paperwork in more detail.

Portable outdoor gas appliances, such as camping cookers, must carry an approval number and the badge of the body that certified them as safe for use in Australia. Building and Energy says an appliance missing both markings must not be used in WA, so check the badge before paying to repair an imported unit. Gas heaters more than 10 years old should be serviced every year, according to the same advice. Servicing is also advised when the outer case becomes discoloured, the heater is hard to relight or the flame burns yellow.

A smell of gas inside the home is not normal, and Building and Energy advises shutting the gas off at the meter or cylinder first. Ventilate the area, keep away from switches, flames and anything else that could spark, and report the leak before going back inside. Carbon monoxide is a colourless, odourless and poisonous gas that can come from faulty or misused gas appliances. Early symptoms often include headaches, nausea and tiredness, and anyone affected needs medical help immediately. Flueless gas heaters, which have no pipe venting fumes outside, release their exhaust into the room, so they need regular servicing and permanent air vents. Finding and fixing a gas leak is priced under gas leak repairs, at roughly $200 to $600 as a 2027 estimate.

Gas Appliance Checks Before a Repair

Item
What to check
Licence
Fitter's licence shown on the online search
Paperwork
Notice of Completion for non-servicing work
Heater age
Yearly service once it passes 10 years
Flame colour
A yellow flame means book a service

A gas service costs about $150 to $300 per appliance in 2027.

Gas call-outs in metropolitan Perth run about $80 to $180 each.

Shut the gas off at the meter or cylinder and ventilate before calling anyone about a gas smell.

Fridge and Freezer Repairs Involving the Cooling Gas

Fridges and freezers hold refrigerant, the cooling gas, in a sealed system of pipes, a compressor that pumps the gas and coils that carry heat away. Electrical faults such as a failed fan, thermostat or defrost heater can usually be fixed without opening that system. Leaks, blocked pipes or a failed compressor mean the refrigerant must be handled, and that work is licensed nationally by the Australian Refrigeration Council (ARC). A restricted licence for household refrigeration and air conditioning appliances covers work on home fridges, freezers and some plug-in commercial drinks fridges. That restricted licence does not cover split system air conditioners, the type with an indoor and an outdoor unit, which need a different licence.

The full refrigeration and air conditioning licence allows work on all refrigeration and air conditioning equipment except the systems in vehicles. A separate recovery licence allows the gas to be drained and captured from equipment being retired, as happens when an old fridge is degassed. You can check a technician's licence through the ARC's online search or by calling 1300 88 44 83. Split system faults are a separate trade, with prices set out under air conditioning repairs in WA. Plumbed fridges with an ice maker also need the water line checked, and a new line costs about $180 to $350 under fridge water line installation.

Licence ARC Code What It Covers Typical Home Use
Restricted domestic appliances RDR04 Domestic fridges, freezers and air conditioning appliances, not split systems Fridge or freezer sealed system repair
Full refrigeration and air conditioning RAC01 Refrigeration and air conditioning work outside the automotive industry Any home cooling equipment
Restricted split systems RSS03 Single-head split systems and two-part heat pumps under 18 kW Split system installation or removal
RAC recovery RRR12 Recovering refrigerant while decommissioning equipment Degassing a fridge before disposal
Trainee TL000 or CL000 Training licence lasting up to one year Apprentice working under supervision

How Hard Country Water Affects WA Appliances

Hard water carries a higher than usual level of calcium and magnesium salts, which leave a chalky crust called scale on heating elements, valves and spray arms. Water Corporation says country customers are more likely to notice hard water because their supply comes mainly from groundwater. Scale on a dishwasher element or a kettle base slows heating and can lead to repeat call-outs for the same fault. Some appliances, dishwashers among them, come with the maker's suggestions for managing hard water, so read the manual before booking a repair. Groundwater supplies differ from town to town, so a technician who works locally will often know how hard the supply is in your area.

Water Corporation also suggests opening the pressure relief valve, the small lever on a hot water system, for a few seconds each month to limit scale. Descaling products made for calcium and lime deposits suit kettles, coffee machines and steam ovens when used as the maker directs. Smeg makes kettles, toasters and espresso machines as well as freestanding cookers, dishwashers and refrigerators. A technician called out to a scaled element should say whether descaling would have prevented the failure, so you can avoid a repeat visit. Country households can keep a note of descaling dates with the appliance manual, which helps any repairer judge how the fault began. Hot water system faults are priced separately under hot water system repairs, since that work follows its own licence rules.

Scale Checks for Country Households

Appliance
What to check
Dishwasher
Maker's hard water advice in the manual
Kettle
Scale on the base and the element
Coffee machine
Descaling as the maker directs
Hot water system
Pressure relief valve opened each month

Country supplies drawn from groundwater are more likely to be hard.

Descaling products should be made for calcium and lime deposits.

Read the maker's descaling instructions first, because the wrong product can damage seals and other parts.

Using Dryers and Heaters Safely in WA Homes

Fire prevention advice on the DFES website includes a list of habits for clothes dryers, which run hot and gather lint. DFES advises cleaning the lint filter every time the dryer is used and avoiding overloading the machine. Turn the dryer off before leaving the house, and always let it finish its cool-down cycle. A dryer that is malfunctioning should not be used again until a licensed electrical contractor has fixed it. LG makes heat pump dryers, front load and top load washing machines, and fridge freezers.

Portable heaters and electric blankets can develop faults and may be recalled as unsafe, DFES notes. It advises keeping fabrics at least one metre from a heater and switching heaters off at the power point when not in use. Electric blankets with frayed fabric or cords should be inspected by an electrician or replaced, instead of being patched at home. Dryer connection and venting are priced under dryer installation, while a laundry swap is covered by washing machine installation.

Dryer and Heater Safety Points

Check
When
Lint filter cleaned
Every time the dryer is used
Cool-down cycle finished
Before the load comes out
Dryer switched off
Before leaving the house
Heater cleaned of dust
Every three months

Stop using any dryer that overheats, sparks or gives off burning smells.

Keep fabrics at least one metre away from any heater.

Book a repair for a malfunctioning dryer instead of running it until it stops completely.

When the Seller Must Fix a Faulty Appliance

Before paying for any repair, check whether the appliance is covered by a recall or by the consumer guarantees in the Australian Consumer Law. Consumer Protection, the WA agency that handles fair trading matters, explains that products sold in Australia must meet basic rights called consumer guarantees. Those guarantees include acceptable quality and being fit for the purpose sold, and they apply alongside any warranty the maker offers. For a major problem, the buyer can choose a refund or a replacement, while a minor problem lets the business repair it free or offer a replacement or refund. Consumer Protection also says a business must not tell customers to take the problem to the manufacturer or importer. The seller stays responsible to the buyer, and the manufacturer must repay the seller when the fault is the manufacturer's.

Products must also have spare parts and repair services available for a reasonable time, meaning what an ordinary person would think is fair. A change of mind gives no right to a refund, repair or replacement under these guarantees. Fisher & Paykel makes fridges, washing machines, dryers and DishDrawer dishwashers, and its Australian site states a two-year manufacturer's warranty on its appliances. A maker's warranty like that is an extra promise the business must honour, and it adds to the consumer guarantees instead of replacing them. National guidance on these rights is published by the Australian Competition and Consumer Commission (ACCC).

Recalls are another reason to check before booking a paid repair. DFES points households to the Product Safety Australia website to check whether a heater, blanket or other appliance has been recalled. Westinghouse makes ovens, cooktops, fridges, dishwashers, washing machines and dryers, and its Australian site lists current recalls alongside repair booking. A recalled appliance is handled through the fix or refund offered in the recall notice, so a private repair bill may be avoidable.

Situation First Step Remedy to Ask For Who to Approach
Appliance recalled Read the recall notice The remedy the notice sets out Supplier named in the notice
Major failure soon after purchase Stop using it and keep the receipt Refund or replacement, your choice The seller
Minor failure Report it in writing Free repair, or replacement or refund The seller
Spare parts unavailable Ask the seller in writing Rights under the consumer guarantees The seller, then Consumer Protection
Change of mind None under the guarantees No right to a remedy Store policy only
Same fault after a paid repair Contact the repairer promptly Fix under the guarantees for services The repair business

Who Pays for Appliance Repairs in a WA Rental

In a WA rental, the landlord must keep the home in a reasonable state of repair, and that duty includes appliances supplied with the property. Tenants should request non-urgent repairs in writing, by email or letter, and keep a copy of each request. The landlord does not have to fix an item recorded as not working in the rental agreement, or one that cannot reasonably be expected to work. Tenants who want to arrange a non-urgent repair themselves need written permission first, or the cost may stay with them. Damage caused by the tenant, guests or pets is the tenant's responsibility, though fair wear and tear, meaning normal ageing from everyday use, is not.

Consumer Protection treats some faults as urgent repairs with tight deadlines for landlords. Essential services include water, gas, hot water, sewerage and electricity, and the landlord has 24 hours to organise those repairs. Other urgent repairs that could cause damage, injury or hardship give the landlord 48 hours to arrange a suitable repairer. If the landlord does not respond to an urgent repair, the tenant may organise it and send the invoice and itemised receipt. The landlord must then reimburse any reasonable expense, and unpaid claims can go to the Magistrates Court. A failed hot water system is the clearest appliance example of an essential service, since hot water is named on that list.

Landlords furnishing a rental can keep the manuals, receipts and warranty details for each appliance together, ready for any repairer. Recording the age and condition of every appliance on the property condition report, the record of the home's state at move-in, helps settle later questions about wear and damage. At the end of a tenancy, oven grease is a cleaning question instead of a repair one, and is handled through oven cleaning in WA. Stained lounges in a furnished rental call for upholstery cleaning services, not an appliance visit. Wider end of tenancy cleaning is priced under bond cleaning for WA homes.

Rental Appliance Repair Timeline

Fault
Landlord deadline
Gas or hot water failure
24 hours to organise repairs
Electricity failure
24 hours to organise repairs
Fault risking damage or injury
48 hours to arrange a repairer
Non-urgent appliance fault
Requested in writing by email or letter

Keep copies of every repair request and the landlord's replies.

Tenants need written permission before arranging non-urgent repairs.

Tenants who fix an urgent fault themselves should keep the invoice and itemised receipt for reimbursement.

Getting Rid of an Old Fridge or Washing Machine

WA bans regulated e-waste, meaning discarded electrical and electronic goods, from landfill, and whitegoods count as regulated e-waste in the large appliances category. Dishwashers, washing machines, dryers, ovens and rangehoods are named as large appliances, while freezers and air conditioners fall under temperature exchange equipment, the group for items that heat or cool. Households are not bound by the ban itself, but the State Government encourages them to take regulated e-waste to drop-off points. It also asks residents to keep e-waste out of kerbside bins altogether.

Drop-off points that accept e-waste can be found through the Recycle Right website, though not every facility takes residential items. Councils that collect e-waste from the roadside verge are expected to ask residents to keep it separate from other waste. Leaving a broken regulated item at a charity bin that does not accept it is treated as illegal dumping. Fridges and freezers hold refrigerant, which should be drained and captured by a person holding a suitable ARC licence before the cabinet is scrapped. A paid pickup for a fridge costs about $80 to $180 as a 2027 estimate, under rubbish removal in WA.

When a repair is refused or would cost more than it is worth, the replacement cost includes connection as well as the appliance itself. Connecting a freestanding appliance costs about $80 to $250, and a dishwasher installation at about $150 to $400. Wall oven installation runs from about $180 to $450, and a cooktop installation from about $200 to $650. Those figures come from WA price guides and exclude the cost of the new appliance. Plumbing and connection details for a replacement unit are set out under dishwasher installation. Ask the installer whether removal of the old machine is included, since disposal adds a separate charge when it is not.

Item Category Under the Ban Before Disposal Where It Goes
Washing machine or dryer Large appliance Disconnect and drain the hoses E-waste drop-off or council collection
Dishwasher Large appliance Water turned off and hoses drained E-waste drop-off or council collection
Oven or rangehood Large appliance Hardwired units disconnected by a licensed person E-waste drop-off or council collection
Freezer Temperature exchange equipment Refrigerant recovered by an ARC licence holder E-waste drop-off or council collection
Fridge Whitegoods, regulated e-waste Refrigerant recovered by an ARC licence holder E-waste drop-off or council collection
Air conditioner Temperature exchange equipment Refrigerant recovered by an ARC licence holder Licensed installer or drop-off
Screen or computer Screens and IT equipment Personal data wiped E-waste drop-off point

Repairing Small Kitchen Appliances, Microwaves and Vacuums

Small appliances often cost less to replace than to diagnose, so ask for the diagnostic fee before handing one over. Breville makes espresso machines, juicers, food processors and air fryers, and its Australian site lists service centres for its products. Panasonic makes convection and combination microwave ovens, rice cookers and bread makers. Dyson makes robot vacuums, air purifiers and hair dryers, so check the warranty registration before paying for an independent repair. Benchtop machines that fail while still under guarantee should go back to the seller, since the seller carries the consumer guarantee.

Microwave doors, hinges and seals matter for safety as well as for cooking, so a damaged door is a reason to stop using the oven. A new domestic microwave costs about $100 to $400 as a 2027 estimate, so a repair costing more than that rarely makes sense. Portable appliances in a home office can be booked in with a test and tag visit, which carries a minimum charge of about $120 to $260. Single items are covered under single phase appliance testing and tagging for household and small office equipment.

Booking the Maker's Repair Service and Finding Parts in WA

Most large appliance makers run their own service booking systems, and many also list parts suppliers. Electrolux makes ovens, cooktops, fridges, dishwashers and laundry appliances, and its Australian site offers online repair booking and a spare parts distributor list. Haier makes refrigerators, freezers, washing machines, dryers and dishwashers, and sells spare parts and water filters through its Australian site. Choosing a technician the maker authorises matters most while the warranty is running, since warranty work is normally booked through the maker. Once the warranty ends, an independent technician may reach a regional town sooner, provided genuine or equivalent parts are used.

Samsung makes French door fridges, washer-dryer combos, tumble dryers and dishwashers. Hisense makes bar fridges, chest freezers, washer and dryer combos and microwaves. Bosch makes dishwashers, washers and dryers, fridges and coffee machines for Australian homes. Model and serial numbers on the rating plate let any technician check part availability before driving out.

Miele makes washing machines, tumble dryers, dishwashers and steam ovens, along with detergents and vacuum bags. Premium European machines can need parts that are ordered in, so a regional household should confirm stock before the first visit. Error codes shown on the display help pinpoint the fault quickly, and a photo of the code saves time on the phone. Keep the receipt, the warranty card and the manual in one folder, because every repairer will ask for some of them. Registering a new appliance with its maker also makes later warranty bookings quicker.

Details a Technician Needs

Detail
Where to find it
Model number
Rating plate inside the door or on the back
Serial number
Same plate, next to the model number
Purchase date
Receipt or warranty registration
Fault history
Your notes on when and how it fails

Photos of the rating plate can save a wasted trip to remote towns.

Error codes on the display point the technician toward the right part.

Confirm the part is in stock before the visit, especially outside the Perth metropolitan area.

What to Look Out For in a WA Appliance Repair Quote

Be wary of anyone who offers to repair a hardwired oven without a restricted electrical licence or an electrician's licence. Gas work offered by someone who cannot show a gasfitter's licence on the Building and Energy search is a safety risk as well as a legal one. A fridge repair that involves adding refrigerant should come from an ARC licence holder whose licence you can check. Watch for quotes that give a lump sum with no parts named, because they make it hard to judge whether the repair was done. Pressure to pay the full amount in cash before the work is finished leaves you little bargaining power if the fault returns. Be careful with any claim that you must pay because the maker's warranty has expired, since the consumer guarantees can still apply.

A sound repair quote names the appliance, the fault found, each part and its price, the labour time and any travel charge. It should state how long the repair itself is guaranteed and what happens if the same fault returns within that time. Technicians who carry public liability insurance and show an Australian Business Number (ABN) on the invoice are easier to deal with if something goes wrong. Public liability insurance is the cover that pays for damage a business causes to your home during the job.

Appliance Repair Quote Checks

Check each quote for
The licence that matches the work, whether electrical, gas or refrigerant.
Each part named, with its price and whether it is a genuine part.
Labour time and any travel or zone fee shown on separate lines.
The guarantee period on the repair and what that guarantee covers.
The diagnostic fee and whether it is credited if you go ahead.
An ABN and the business name printed on the quote and invoice.

A lump sum with no parts listed is very hard to check.

Consumer guarantees can still apply after the maker's warranty ends.

Choose the quote that names the fault, the parts and the licence held, even when its total is slightly higher.

Getting Appliance Repair Quotes You Can Compare

Give every technician the same written description so the quotes cover the same job. Include the brand, model and serial number, the age of the appliance and a photo of its rating plate. Describe the fault in plain words, including any error code, noise, smell or leak, and when it happens. Say whether the appliance is plug-in, hardwired or gas, and whether a safety switch has tripped. Add your suburb or town, any stairs or tight access, and the days that suit a visit.

Ask each technician to price the call-out, the diagnosis, the likely parts and the labour on separate lines. Where the fault cannot be known until the machine is opened, a fixed diagnostic fee with a written report is a fair starting point. Compare that report with the cost of replacement, including connection and removal, before agreeing to expensive parts. For a gas appliance, check that the quote comes from a licensed gasfitter and mentions any Notice of Completion that applies. For a hardwired oven, confirm the technician holds the restricted appliance licence or an electrician's licence. Regional households can ask for travel to be shared across several jobs, which can lower the zone fee on each one.

After the repair, keep the invoice, the part list and any test results with the appliance manual. Those records help with a later warranty claim and show a future buyer or tenant that the appliance has been maintained. Book a yearly service for gas heaters once they pass ten years old, as Building and Energy recommends. Faults outside business hours are priced under emergency electrician call-outs, at higher after-hours rates.

Appliance Technicians Across WA

Call-out and labour figures on this page apply across Western Australia, with metro rates in Perth and higher call-outs in many regional towns. Jobs in the Pilbara, Goldfields and Kimberley often add a travel or zone fee, and parts may take longer to arrive.

▶ Perth 28 areas
Perth CBD Joondalup Wanneroo Butler Alkimos Stirling Scarborough Hillarys Karrinyup Morley Bayswater Bassendean Belmont Victoria Park South Perth Melville Applecross Canning Vale Willetton Cannington Fremantle Cockburn Rockingham Baldivis Gosnells Armadale Byford Ellenbrook
▶ Mandurah & Peel 20 areas
Mandurah Halls Head Dawesville Falcon Erskine Silver Sands Madora Bay San Remo Greenfields Meadow Springs Lakelands Coodanup Pinjarra Ravenswood Waroona Dwellingup North Dandalup Serpentine Jarrahdale Boddington
▶ Bunbury & South West 24 areas
Bunbury Australind Eaton Dalyellup Gelorup Capel Busselton Vasse Dunsborough Yallingup Margaret River Cowaramup Augusta Harvey Brunswick Junction Collie Donnybrook Balingup Nannup Bridgetown Boyup Brook Manjimup Pemberton Northcliffe
▶ Swan Valley & Perth Hills 24 areas
Guildford Midland Herne Hill Middle Swan West Swan Upper Swan Caversham Baskerville Henley Brook Swan View Helena Valley Kalamunda Gooseberry Hill Lesmurdie Walliston Carmel Pickering Brook Mundaring Glen Forrest Darlington Parkerville Chidlow Roleystone Bedfordale
▶ Avon Valley & Wheatbelt 22 areas
Northam York Toodyay Beverley Bakers Hill Clackline Wundowie Goomalling Dowerin Wongan Hills Cunderdin Tammin Kellerberrin Merredin Wyalkatchem Trayning Nungarin Quairading Brookton Corrigin Bruce Rock Narrogin

Appliance Repair FAQ

Do I need an electrician to fix my washing machine in WA?
Usually not, because WA regulations exempt the testing and servicing of appliances connected by a plug and flexible cord. Servicing means finding the faulty part and replacing it with one built to the same or almost the same technical standard. Work on the power point or the wiring behind the machine still needs a licensed electrician. A trained appliance technician should test the machine after the repair and record the parts used.
Who can replace the element in a hardwired wall oven?
A holder of the WA restricted electrical licence for domestic electrical appliances, or a licensed electrician, can do this work. That restricted licence allows disconnecting and reconnecting cooking appliances wired into the house, at up to 240 volts. It also allows faulty electrical parts to be replaced with matching ones. It does not allow any installing or changing of the house wiring, which needs an electrician.
What does an appliance repair call-out cost in Perth?
A standard electrician call-out in metropolitan Perth is estimated at $80 to $130 for 2027. A call-out with the first hour of work included comes to about $170 to $280. Gas call-outs run about $80 to $180, and replacement parts are priced on quote. Evening, weekend and public holiday attendance costs more, at about $200 to $540 before work.
Why is a call-out dearer in Karratha or Broome?
Technicians in remote towns cover long distances, and parts often arrive by road freight. WA estimates put a Pilbara call-out at about $140 to $200 and a Kimberley call-out at about $130 to $185. Some businesses add a regional zone fee of about $50 to $220 or charge travel by the hour. Booking several appliance jobs for one visit spreads those travel costs further.
Who can refill the cooling gas or fix a leaking fridge?
Work that handles refrigerant, the cooling gas, needs a licence from the Australian Refrigeration Council, known as the ARC. The ARC's restricted licence for household appliances covers home fridges and freezers. Simple electrical faults such as a failed fan or thermostat may not involve the refrigerant at all. You can check a technician's ARC licence online or by phoning 1300 88 44 83.
What should I do if my gas cooktop smells of gas?
Turn the gas off at the meter or cylinder, as Building and Energy advises for any gas smell. Open doors and windows, and keep away from switches, flames and anything else that could spark. Report the leak and stay out of the area until it is safe to go back in. Only a licensed gasfitter should then find and repair the leak.
Who pays to fix a broken oven in a WA rental?
The landlord must keep the rental in a reasonable state of repair, including supplied appliances. Tenants should request non-urgent repairs in writing, by email or letter. The tenant pays only when the tenant, guests or pets caused the damage, not for fair wear and tear. Gas, electricity and hot water failures are essential services, which the landlord must organise within 24 hours.
Can I put an old fridge out for verge collection?
Only where your council runs a verge collection that accepts e-waste, and it may ask you to keep it separate. WA has banned regulated e-waste from landfill, and whitegoods count as regulated e-waste. Households are encouraged to use drop-off points listed on the Recycle Right website. The cooling gas in a fridge should be drained and captured by a suitable ARC licence holder before scrapping.
Will the shop or the maker fix a faulty new appliance?
Under the consumer guarantees, the seller is responsible for fixing the problem with you. Consumer Protection WA says a business must not send customers to the manufacturer or importer instead. For a major failure you can choose a refund or replacement, while a minor failure allows a free repair. Any maker's warranty adds to these rights and does not replace them.
Why does my dishwasher scale up in country WA?
Water Corporation says country customers are more likely to have hard water because their supply comes mainly from groundwater. Hard water carries calcium and magnesium salts that leave scale on elements and spray arms. Dishwasher makers often include suggestions for managing hard water in the manual. Following that advice can prevent repeat call-outs for the same heating fault.

Appliance Repair Specialists WA

For Trades & Contractors - WA

Appliance repairs often connect with other trades in the home. Electricians handle wiring and safety switches, gasfitters handle gas supply, and waste services take away machines that cannot be saved. WA households can book any of these services alongside an appliance repair.

Compare Appliance Repair Quotes

Tell us your suburb or town, the appliance and its fault, then compare quotes from local WA technicians pricing the same repair.

Get Free Appliance Repair Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

Service availability may vary in regional WA. Verify licences at WA Building and Energy.
Prices are 2027 estimates taken from Western Australian trade price guides for call-outs, labour, gas servicing and small cord repairs. Replacement parts have no WA figure and are priced on quote, and regional travel, after-hours work and freight are added separately.
Need work done? Get free quotes. Post a Job – It's Free