Looking for a Handyman in Canberra?
Tell us your suburb, the year your home was built, whether you own or rent, and list each small job with a photo. We will pass that list to local handymen, so every quote you receive prices the same work.
Canberra Handyman Price Guide
These figures are 2027 estimates for handyman work in Canberra. Your price depends on the number of jobs in one visit, the wall types, whether materials are supplied and whether any task needs a licensed electrician, plumber or builder instead.
Hire a Handyman Canberra ACT - Get Local Quotes
Hiring a handyman in Canberra starts with sorting the small jobs a handyman can lawfully do from the jobs that belong to a licensed trade under ACT rules. Handyman labour is estimated at about $65 to $95 an hour for 2027, with a minimum call-out, the least charged per visit, of about $80 to $150. Bundling several small jobs into one visit spreads that call-out charge across the whole list. Carpenters and general handymen need no ACT construction licence today, but builders, electricians, plumbers, drainers and gasfitters all do. Access Canberra keeps public registers, so a licence can be confirmed in minutes before anyone arrives. A licensed electrician must fit any new power point, even when a handyman hangs the TV bracket beside it. Ask for a certificate of currency, the insurer's one-page proof that public liability cover is active, before work begins. Homes built on or before 1990 have a high chance of containing asbestos, and loose-fill asbestos (Mr Fluffy) houses on the ACT register must not have cavities drilled. Renters must ask for written consent before changes, although picture hooks are a minor modification a landlord cannot refuse without a tribunal order. Rentals with bare ceilings had to be insulated by 30 November 2026 for existing tenancies, using a certified installer. One written job list with photos lets every handyman price the same work, which turns three quotes into a fair comparison. Post your job on The Quote Yard and we will connect you with local handymen across Canberra who can quote on it.
At a Glance - Hiring a Handyman in Canberra, 2027 Estimates
| Job | Price Range | How It Is Charged | What Drives It In Canberra | Who Can Do It |
|---|---|---|---|---|
| Handyman labour | $65 - $95 per hour | Hourly after the minimum | Travel, parking and job mix | Handyman, no ACT licence needed |
| Minimum call-out | $80 - $150 | Set fee or first hour | Distance from the handyman | Handyman |
| Half day booking | $280 - $380 | About four hours on site | Length of the job list | Handyman |
| Flat-pack item | $50 - $150 per item | Per item or hourly | Size and number of parts | Handyman or assembler |
| TV on a fixed bracket | $120 - $200 | Fixed per TV | Wall type and cable hiding | Handyman, electrician for new power |
| Sticking door adjusted | $60 - $120 | Fixed or hourly | Hinge wear and frame movement | Handyman or carpenter |
| Small plaster hole | $80 - $150 | Fixed per patch | Drying time and paint match | Handyman or plasterer |
| Grab rail fitted | $80 - $180 | Supply and install | Framing behind tiles | Handyman or rail installer |
| Flyscreen mesh replaced | $40 - $80 | Per screen | Mesh type and frame condition | Handyman or screen business |
| Door bottom seal | $80 - $150 | Supply and install | Door width and floor gap | Handyman |
| Rotary clothesline installed | $150 - $300 | Labour only | Ground socket and concrete base | Handyman |
| Power point behind a TV | $180 - $280 | Fixed per point | Wall cavity and circuit | Licensed electrician only |
What Pushes a Canberra Handyman Price Up
Booking an Odd-Jobs Tradesperson in Canberra
A handyman is a general tradesperson who works through a list of small repairs, fixings and installations in one visit, usually charged by the hour. In a Canberra home that list might include a sticking door, a loose towel rail, a hole in the plasterboard and a flat-pack wardrobe. Common tasks are listed in our ACT handyman services guide, while hiring the right person under ACT rules is the focus here. Choosing well matters here, because territory licensing, the loose-fill asbestos register and renting rules all shape what a handyman can lawfully touch. Most visits combine several of these tasks, which is why the way a handyman charges matters as much as the hourly rate. A clear brief and a few checks before the visit protect your home, your money and, for renters, the bond.
Start by writing every job on one list, with a photo and a rough measurement beside each item. Mark any job that involves wiring, water pipes, gas or the frame of the house, because those jobs usually move to a licensed trade. A Canberra electrician handles new power points and light circuits, while a Canberra plumber handles taps, toilets and anything on the water supply. Note the year your home was built, whether it appears on the loose-fill register and whether you own it or rent it. Those details decide which jobs a handyman can quote on and which need a different tradesperson altogether. Sending the identical list to every handyman also makes the quotes that come back far simpler to compare.
Canberra Handyman Rates and Small-Job Prices for 2027
Handyman labour in Canberra is estimated at about $65 to $95 an hour for 2027, based on current ACT price guides. Most handymen also set a minimum call-out of about $80 to $150, which covers travel and the opening part of the visit. A half day of about four hours on site costs roughly $280 to $380, which suits a long list of small jobs. Single tasks are often priced as a fixed amount, such as about $50 to $150 for each item of furniture assembly, or $80 to $180 for a bed frame. A wardrobe takes longer, and ACT guides estimate about $150 to $400 to assemble one, depending on whether the doors slide or swing. Adjusting a sticking door costs about $60 to $120, and TV wall mounting on a fixed bracket at about $120 to $200.
Patching a small hole in plasterboard is estimated at about $80 to $150, while plaster crack repairs across a whole room can reach $200 to $500. Supplying and fitting a standard grab rail runs at about $80 to $180, and replacing flyscreen mesh in an existing frame at about $40 to $80. Installing a rotary clothesline costs about $150 to $300 for labour, plus about $100 to $200 if a concrete base is needed. All of these figures are 2027 estimates drawn from ACT price guides, and the table below shows how each one is usually charged.
| Job | 2027 Estimate | How It Is Charged | What Moves It |
|---|---|---|---|
| Handyman labour | $65 - $95 per hour | Hourly, after the minimum | Job mix and travel |
| Minimum call-out | $80 - $150 | Set fee or first hour | Distance and parking |
| Half day, about four hours | $280 - $380 | Block booking | Length of the list |
| Flat-pack item | $50 - $150 | Per item | Number of parts |
| Bed frame assembled | $80 - $180 | Per frame | Size, single to king |
| Wardrobe assembled | $150 - $400 | Per wardrobe | Sliding or hinged doors |
| TV on a fixed bracket | $120 - $200 | Per TV | Wall type |
| TV on a full-motion bracket | $200 - $350 | Per TV | Arm weight and fixing |
| Small plaster hole | $80 - $150 | Per patch | Paint match |
| Large plaster hole | $150 - $300 | Per patch | Backing and drying time |
| Grab rail supplied and fitted | $80 - $180 | Per rail | Tiles and framing |
| Flyscreen mesh only | $40 - $80 | Per screen | Mesh type |
| Rotary clothesline installed | $150 - $300 | Labour only | Socket and concrete |
| Old clothesline removed | $50 - $100 | Per line | Footing size |
Call-Out Minimums, Half Days and Fixed Job Prices
A minimum call-out means you pay a set amount even if the job takes ten minutes, so one tiny task rarely costs less than that figure. Bundling several small jobs into one visit spreads the call-out across the whole list, which lowers the effective cost of each item. Ask whether the minimum includes the first hour of labour or is a separate travel fee added on top of the hourly rate. Half-day and full-day bookings suit long lists, but agree in advance what happens if the work runs over or finishes early. A written note of the minimum, the hourly rate and the booking length prevents an argument when the invoice arrives.
Fixed prices suit single jobs with a clear scope, such as fitting a door seal or assembling one wardrobe. Materials are usually extra, so ask whether the quote covers hinges, wall anchors, filler, paint and the trip to collect them. Some handymen add a margin on materials they buy, while others ask you to buy items yourself before the visit. Either approach is reasonable, as long as the quote says which one applies and how purchases will appear on the invoice. Access Canberra advises paying only once the job is complete and asking for an itemised invoice, meaning a bill with each charge on its own line. Before you agree to a large upfront payment for a small repair, ask the handyman to explain why it is needed.
Reading a Handyman Booking
Ask whether time spent buying materials is charged at the full hourly rate.
Get the visit day, arrival window and agreed price confirmed by text or email beforehand.
Which Handyman Jobs Need an ACT Construction Licence
The ACT issues construction occupation licences, which are territory licences for trades whose work affects safety, and the list includes builders, electricians, plumbers, drainers, gasfitters and gas appliance workers. According to the ACT planning and building website, trades such as carpenters and bricklayers do not currently need a licence in the ACT. A general handyman doing small repairs and fixings therefore usually works without a construction licence, which is lawful for that kind of work. Licensing follows the type of work, not the job title, so a handyman who takes on wiring, plumbing or licensed building work needs the matching licence. Access Canberra assesses and decides licence applications for the ACT Government.
Builder licences come in four classes, labelled A to D, and each class covers a different scale of building work. Class A has no height limit, Class B covers buildings of three storeys or lower, and Class C covers homes of two storeys or lower. Class D covers non-structural basic building work, meaning work that does not carry loads or hold any part of the building up. Some experienced handymen hold a Class D or higher licence, which lets them take on licensed building work within that class. Ask any handyman who offers renovation work which licence class they hold, and check that class against the job. A claim to be fully qualified proves nothing until you have seen a licence number on the register.
The ACT Government is exploring licences for more trades, including carpentry, plastering, tiling, waterproofing, and painting and decorating. Its project page says the work is at the planning and policy stage, and no final decisions will be made before a detailed impact assessment. Changes are not expected before 2027, so check the current position before a large job that crosses into those trades. For framing or anything structural, a carpentry business or a licensed builder is the safer choice, and garden walls belong with a Canberra bricklayer.
| Job | Licence Needed in the ACT | Who to Book | What to Check |
|---|---|---|---|
| Shelves, hooks and picture rails | None for the work itself | Handyman | Wall type and loose-fill status |
| Flat-pack and furniture assembly | None | Handyman or assembler | Wall anchors for tall units |
| Door adjustment and new handles | None | Handyman or carpenter | Hardware and frame condition |
| New power point or light circuit | Electrician licence | Licensed electrician | Certificate of electrical safety, the electrician's record of the wiring |
| Tap, toilet or water pipe work | Plumber licence | Licensed plumber | Licence on the public register |
| Gas heater or cooktop connection | Gasfitter licence | Licensed gasfitter | Licence on the public register |
| Structural or load-bearing work | Builder licence of the right class | Licensed builder | Class A, B, C or D |
| Pergola or deck small enough to need no building approval | None for exempt work | Handyman or carpenter | Every exemption condition met |
| Drain or stormwater work | Drainer licence | Licensed drainer | Licence on the public register |
| Asbestos removal | Asbestos removalist licence | Licensed removalist | Removalist licence details |
Licence Register, ABN and Insurance Papers to Ask For
Access Canberra keeps public registers of licensed construction practitioners, and its advice is to search for the tradie or business before you hire. You can reach those registers through the Access Canberra website, although a new licence can take up to seven days to appear. Access Canberra also suggests knowing the tradie's full name, physical address, registered business name and ABN before signing a contract. An ABN, or Australian Business Number, is the eleven digit number that identifies a business to government and to its customers. You can confirm that an ABN is active through ABN Lookup, a free search run by the Australian Business Register.
Public liability insurance covers damage to your property, or injury to other people, caused by the handyman's work. Ask for a certificate of currency, a single page from the insurer confirming the policy is in force, its limit and its expiry date. Workers compensation is separate insurance that pays wages and medical costs for workers hurt on the job, and WorkSafe ACT says every ACT employer must hold a policy for its workers. The regulator also notes that public liability and general business insurance do not cover workers compensation. A handyman who brings an offsider, meaning a helper or apprentice, should be able to show evidence of both types of cover. Keep copies of every document with your quote, so the details are at hand if something is damaged during the visit.
Checking a Canberra Handyman's Details
Where Handyman Work Stops and Electrical Work Starts
ACT rules say electricians must be licensed to perform any electrical wiring work in the territory. Adding a power point behind a wall-mounted TV, moving a light switch and hard-wiring a new light fitting are all wiring jobs. A handyman can hang the TV bracket and tidy plug-in cables, but the new power point belongs to a licensed electrician. ACT price guides put a power point added behind a TV at about $180 to $280, separate from the bracket itself. Booking both trades for the same day means the wall is opened only once and the TV goes up straight after.
Once wiring work is finished, the electrician must send a certificate of electrical safety to the ACT electrical inspectors within seven days. That certificate is the electrician's formal record of the new wiring, and the inspectors can follow it with an inspection. Ask for your copy and keep it with the house records, since insurers and future buyers may ask about recent electrical work. Booking a licensed electrician for a power point installation brings that paperwork, while wiring done by a handyman would not. Ceiling fans, downlights and hard-wired smoke alarms fall into the same group, because each one connects to fixed wiring. An electrical safety inspection is worth booking if an older home has scorched switch plates or lights that flicker.
Smoke alarms are a frequent handyman request, so the ACT renting rules on them are worth knowing. Landlords must make sure working smoke alarms are installed at the start of a tenancy, on each storey and in hallways linked to bedrooms. Tenants are responsible for checking the alarms and replacing the batteries while the lease runs. Hard-wired alarms connect to the home's fixed mains wiring, so book smoke alarm installation through a licensed electrician when one needs replacing.
| Task | Handyman | Licensed Electrician | Paperwork |
|---|---|---|---|
| TV bracket on a solid wall | Yes | Not needed | Quote and invoice |
| Power point behind the TV | No | Yes | Certificate of electrical safety |
| Plug-in lamp or appliance | Yes | Not needed | None |
| Replacing a light globe | Yes | Not needed | None |
| New light fitting or downlight | No | Yes | Certificate of electrical safety |
| Battery change in a smoke alarm | Yes | Not needed | Tenant or owner keeps a note |
| Hard-wired smoke alarm | No | Yes | Certificate of electrical safety |
| Ceiling fan | No | Yes | Certificate of electrical safety |
Taps, Toilets, Gas Heaters and the Licensed Plumbing Line
Plumbers, drainers and gasfitters are licensed occupations in the ACT, along with gas appliance workers. Work on the water supply, the drains or a gas line therefore belongs to someone holding the matching licence. A handyman can refit a toilet roll holder, a towel rail or a shower shelf, as long as nothing connects to a pipe. A dripping tap or a running toilet sounds minor, but the repair sits on the water supply, so book leaking tap repairs or toilet repairs through a licensed plumber. Ask any handyman who offers plumbing which licence they hold, and then check that number on the register.
If your home uses gas for heating or cooking, any job that connects, moves or services a gas appliance needs a licensed gas trade. Leave gas cooktops, wall bayonets (the wall outlets portable gas heaters plug into) and flued heaters, which vent fumes outside through a pipe, alone during a handyman visit. A licensed gasfitter can quote on gas fitting and appliance installation as a separate job. Under the ACT renting rules, a gas leak counts as an urgent repair that the landlord must arrange as soon as practicable.
Who Handles Water and Gas Jobs
Ask the handyman to locate pipes before drilling near a basin, shower or toilet.
A pipe struck by a drill bit can soak a wall cavity before anyone notices the damage.
Mr Fluffy Homes and Why a Handyman Must Not Drill Into Them
Between 1968 and 1979, loose asbestos fibre was pumped into the ceilings of some Canberra houses as a form of insulation. These homes are often called Mr Fluffy houses, after the business that installed the material, and affected properties are listed on an ACT register. ACT Government advice tells tradespeople not to do any work that may break into or open up a wall, floor or ceiling cavity. That rules out the everyday handyman jobs most people book, such as hanging shelves, fixing a TV bracket or patching plasterboard. The guidance names wall and floor cavities as well as the ceiling, so a single drill hole in an internal wall is treated as a risk. Check the register for the address before any handyman visit, including when you rent the home.
The same guidance says workers must not enter the ceiling space or subfloor without the advice and supervision of a Class A licensed asbestos assessor. Such an assessor holds a licence to assess asbestos hazards and advise on safe work, which a general handyman does not have. Owners and residents must keep the Asbestos Management Plan, which records where fibres were found and how to manage them, on display in a case at or near the main entrance. A handyman should read that plan before starting and stop if any task could open a cavity. On an affected house that is still standing, building work is limited to work linked to its demolition, including asbestos removal.
For a handyman, the practical answer is to decline any fixing, cutting or drilling into walls, ceilings or floors at an affected address. Jobs that need no fixing into walls, ceilings or floors, such as assembling freestanding furniture, raise fewer concerns, though the plan still has to be read first. Anyone unsure about a task should contact a licensed asbestos assessor for advice before the visit goes ahead. The ACT asbestos information website explains the register and links to the list of affected properties.
Before a Handyman Visits a Loose-Fill Address
Bonded Asbestos in Pre-1990 Homes and the ACT Removal Rule
Houses missing from the loose-fill register may still hold bonded asbestos, meaning fibres set firmly into a solid product such as fibro sheeting. The ACT asbestos information website says a house built on or before 1990 has a high chance of containing asbestos. Ordinary handyman jobs such as cutting a wall sheet, drilling eaves or replacing a bathroom panel can disturb that material. If the home falls in that age range, treat any unknown sheet as asbestos until a test says otherwise. Booking asbestos testing before the job is far easier than dealing with contaminated dust afterwards.
The ACT is stricter than the national model work safety rules about who may remove asbestos. WorkSafe ACT explains that a person must not remove asbestos from any premises unless they are an appropriately licensed removalist. The only exception is work incidental to minor or routine maintenance, meaning a small task that happens as part of an ordinary repair. The ACT also dropped the national exception that lets up to 10 square metres of non-friable, or bonded, asbestos, the kind that does not crumble easily, be removed without a licence. In practice, a handyman cannot strip out an old fibro wall or a laundry splashback made of asbestos sheet. That work belongs with a licensed asbestos removal business, whatever the size of the area.
WorkSafe ACT also requires all construction workers to complete the 10314NAT Asbestos Awareness course, a short nationally accredited course on recognising asbestos and avoiding exposure. The regulator's page does not say whether a handyman doing small repairs counts as a construction worker for this rule. Asking whether the handyman has completed the course is still a reasonable check for any job in an older home. A handyman who has done the training will usually ask about the age of the house before quoting.
| Situation | ACT Position | Handyman Response | Who to Contact |
|---|---|---|---|
| Home built on or before 1990 | High chance of containing asbestos | Treat unknown sheeting as asbestos | An asbestos testing service |
| Drilling or cutting old sheeting | Removal limited to licensed removalists | No cutting without a test result | An asbestos tester or assessor |
| Small sheet to remove | No 10 square metre exception in the ACT | Licensed removalist only | A licensed asbestos removalist |
| Minor routine maintenance | Only incidental work is exempt | Keep any disturbance minimal | WorkSafe ACT |
| Loose-fill address | No work that penetrates a cavity | Decline fixing and drilling jobs | A licensed asbestos assessor |
| Ceiling or subfloor entry | Class A assessor advice and supervision | Stay out of these spaces | A Class A asbestos assessor |
Picture Hooks, Blinds and Furniture Anchors in a Rented Home
Renters in the ACT must write to the landlord to seek consent before making changes to the property. Some changes are special modifications, which a landlord cannot refuse without an order from the ACT Civil and Administrative Tribunal, known as ACAT, the territory's low-cost tribunal for disputes. Minor modifications are one type, described as changes that can be undone so the property returns to substantially the same condition. The ACT Government gives putting up picture hooks, fixing blinds to a window and planting vegetables in the garden as examples. Furniture anchors, which tie tall furniture to a wall to stop it tipping, are listed separately as safety modifications. Get the landlord's written reply before a handyman arrives, and keep it with your lease.
Tenants generally pay for their own modifications and must undo them before leaving, unless the landlord agrees otherwise. Tell the handyman the job is in a rental, so the fixings chosen can be removed and the holes filled neatly later. Repairs are different, because landlords must complete non-urgent repairs within four weeks and urgent ones as soon as practicable, meaning as quickly as is reasonably possible. Report repairs to the landlord in writing before booking anyone, since tenants are responsible for telling the landlord a repair is needed. When you move out, book the handyman before your end of lease cleaner, so dust from filled holes is cleaned away.
Handyman Jobs in a Rented Canberra Home
Tenants generally pay for modifications and remove them before the lease ends.
Write down the date you asked the landlord and the date of any reply.
Ceiling Insulation Rules for Canberra Rentals
The ACT has a minimum housing standard for ceiling insulation in rental homes. An R-value measures how well insulation resists the flow of heat, and a higher number means stronger resistance. Rental properties with no ceiling insulation, or with insulation rated below R2, must be brought up to at least R5. For existing tenancies, landlords had to make the property comply by 30 November 2026, and new tenancies have nine months from signing. Tenants can object in writing to the work, which gives the landlord a temporary exemption under the standard. Landlords who still need the work done should book the right trades, not ask a general handyman to fit batts, the precut insulation pieces laid across the ceiling.
The ACT Government says a certified installer must install the insulation, and that failing to use one may have consequences for insurance. Before any insulation goes in, a licensed electrician must carry out an electrical safety inspection and fix any electrical issues found. The electrician then provides a certificate of electrical safety to Access Canberra within 14 days. That sequence leaves no role for a general handyman in the roof space, however simple the job may look. Book ceiling insulation installation with a certified installer, and have the electrical check done first. Homes on the loose-fill register raise a separate issue, because nobody should enter those roof spaces without a Class A assessor.
Some homes are exempt, including heritage-listed homes where insulation would affect heritage value, and lower-floor apartments. Homes with a physical constraint, such as a roof design that prevents installation, are also exempt from the standard. Where insulating the whole home would cost more than $10,000, the landlord must still install insulation up to that amount, prioritising living areas and bedrooms. Tenants can read the standard on the ACT Government renting pages before raising the work with a landlord.
| Situation | What the Standard Says | What to Ask For | Who to Book |
|---|---|---|---|
| No insulation or below R2 | Upgrade to at least R5 | A quote stating the R-value | Certified insulation installer |
| Existing tenancy | Had to comply by 30 November 2026 | A firm installation date | Certified insulation installer |
| New tenancy | Comply within nine months of signing | Completion inside that period | Certified insulation installer |
| Before installation | Electrical safety inspection first | Certificate of electrical safety | Licensed electrician |
| Cost above $10,000 | Install up to $10,000, main rooms first | An itemised whole-home quote | Certified insulation installer |
| Heritage or physical constraint | Exemption may apply | The exemption reason in writing | Owner or managing agent |
Sheds, Pergolas and Decks Under the ACT Exemption Limits
Building approval is the formal check by a certifier, a licensed building surveyor, that planned building work meets the building laws before it starts. Some small structures are exempt from building approval under Schedule 1 of the Building (General) Regulation 2008, as long as every condition is met. A garden shed or pergola can be exempt if it is no more than 3 metres high, its floor is within 1 metre of the ground and its roof covers 25 square metres or less. A pergola must also have no walls, and the unsupported span, the distance between supports, of either structure can be no more than 4 metres. Unroofed decks follow similar limits, with no walls, a height of up to 3 metres and a floor no more than 1 metre above ground. Exempt work must still comply with the building code, and an exemption never covers work that disturbs friable asbestos, the crumbly kind that releases fibres easily.
A handyman can build a small exempt structure, but larger ones move into building work that needs approval first. Planning rules are separate from building rules, so check whether a development application, a separate planning approval, is needed as well. For anything bigger, book pergola builders, decking specialists or a shed and garage builder holding the right licence. The ACT statutory warranty, a legal promise about the quality of building work, applies only to residential work that needs approval and costs $12,000 or more.
Exempt Structure Limits at a Glance
Every condition must be met, or the structure needs building approval first.
Exempt work still has to comply with the building code in full.
Ladders, Gutters and Jobs Above Two Metres
Height work deserves its own check before a handyman climbs anything in your home. WorkSafe ACT says construction work where a person could fall more than two metres is high risk construction work. That work needs a safe work method statement, or SWMS, which is a written plan listing the hazards and how each one will be controlled. Ask any handyman quoting on a second-storey window, a high ceiling or roof access how they will work safely at that height. Where guard rails are fitted on an edge, WorkSafe ACT says the top rail should sit at least 900 millimetres above the working surface.
The right ladder matters for this kind of work. Bailey makes ladders and platforms for domestic, trade and industrial use, including stepladders and extension ladders. Gorilla makes industrial-grade ladders along with height safety products. A platform ladder with a guarded top gives steadier footing than a basic stepladder for jobs such as changing high light globes. Gutter work on a single-storey home still involves the roof edge, so many households book gutter cleaning as a separate job. Ask whether the price includes a second person to hold or secure the ladder.
Second-storey flyscreens, high smoke alarms and ceiling repairs all sit near or above that two metre line. Replacing a standard window flyscreen is estimated at about $80 to $150, and a sliding door screen at about $180 to $350. Flyscreen replacement on upper floors may cost more because of access, so describe the height in your brief. Cracked or sagging ceilings belong with a ceiling repairs specialist, since the cause may be a roof leak or a structural fault.
| Height Job | 2027 Estimate | Height Issue | Who Should Do It |
|---|---|---|---|
| High light globe change | Inside a handyman visit | Ladder or platform needed | Handyman |
| Standard window flyscreen | $80 - $150 | Upper floors need safe access | Handyman or screen business |
| Sliding door screen | $180 - $350 | Usually at ground level | Screen business |
| Stair handrail | $100 - $250 per metre | Fall risk on the stairs | Handyman or rail installer |
| External step rail | $150 - $350 | Steps without a rail | Handyman or rail installer |
| Gutter clean, single storey | Priced on quote | Work at the roof edge | Gutter cleaner |
| Cracked or sagging ceiling | Priced on quote | Cause may be a roof leak | Ceiling repair specialist |
| Roof access work | Priced on quote | Over two metres needs a SWMS | Roofing business |
Draught Sealing and Comfort Jobs Before a Canberra Winter
Canberra winters bring frosty mornings, and gaps around doors and windows let warm air escape from heated rooms. Draught sealing is a common handyman job, and ACT price guides put a door bottom seal at about $80 to $150 supplied and fitted. Sealing a complete external door costs about $120 to $250, and each window at about $40 to $100. A typical three bedroom home sealed throughout is estimated at $600 to $1,500, depending on the number of openings and the frame condition. Draught proofing and sealing specialists can quote on the whole house when the list of openings is long.
Raven makes door seal systems for DIY and architectural use, including seals that keep out draughts, dust and insects. Selleys makes No More Gaps filler and Spakfilla, which are used to close cracks around frames and fill small holes in walls. Gyprock makes plasterboard, cornices and base coats, the materials used when a damaged section of wall is cut out and replaced. Ramset makes wall anchors, including DynaBolt sleeve anchors, which expand inside a drilled hole, and ChemSet chemical anchors, which glue a bolt into brick or concrete. Dulux makes interior and exterior paints, and a Canberra painter can take over when a patched wall needs a full recoat. Cabot's makes decking oils and stains for outdoor timber that needs a fresh coat before the cold months.
| Job | 2027 Estimate | What It Fixes | Example Makers |
|---|---|---|---|
| Door bottom seal | $80 - $150 | Gap under an external door | Raven seals |
| Complete external door seal | $120 - $250 | Gaps around the whole frame | Raven seals |
| Window seal, per window | $40 - $100 | Draughts around the sash | Raven window seals |
| Whole three bedroom home | $600 - $1,500 | Every door and window opening | Raven, Selleys |
| Weatherstripping | $50 - $150 | Worn door weatherstrips | Raven seals |
| Gap filling around frames | Inside a handyman visit | Cracks between frame and wall | Selleys No More Gaps |
| Sticking door adjusted | $60 - $120 | Door rubbing as the frame moves | Gainsborough hinges |
| Lock installation | $100 - $300 | Worn or loose locks | Lockwood, Gainsborough |
Faulty Repairs, Refunds, Access Canberra and ACAT
The Australian Consumer Law is the national law setting out consumer guarantees, and handyman work counts as a service under it. The Australian Competition and Consumer Commission says service providers must use an acceptable level of care and skill. Services must also be fit for any purpose you stated and, where no date was agreed, supplied within a reasonable time. Where a service falls short, the remedies can include repair, replacement, a refund, cancellation or compensation for loss. Most handyman jobs fall well below the statutory warranty threshold, so these consumer guarantees are usually your main protection.
Start by contacting the handyman and explaining the problem, the outcome you want and a reasonable deadline for it. Gather your quote, invoice, messages and dated photos, then put the complaint in writing if a conversation does not settle it. Access Canberra can give consumer advice and help resolve a dispute, but it cannot order a business to pay compensation or fix the work. Only a court or tribunal can make that order, and in the ACT that usually means ACAT. The tribunal deals with civil claims of up to $25,000, and its case types include disputes about goods or services. It encourages negotiation or mediation first, and time limits for starting a claim under the Limitation Act 1985 may apply.
What to Look Out For Before Accepting a Canberra Handyman Quote
A sound handyman quote names the business, gives a street address and shows an active ABN. It should list each job separately, with the hourly rate, the minimum call-out, the expected hours and whether materials are included. Any job that needs a licence should name the licence holder and number, or be marked as work the handyman will not do. For homes built on or before 1990, the quote should explain how unknown wall or ceiling sheeting will be handled. Check whether GST, the goods and services tax, is included or added, since that alone can shift the total by ten per cent.
Several warning signs deserve a direct question before you accept a quote. A handyman who offers to rewire a light, move a tap or connect a gas heater without a licence is offering unlawful work. Any quote that includes drilling or fixing at an address on the loose-fill register has missed the most basic ACT check. A request for full payment upfront on a small repair runs against Access Canberra's advice to pay once the work is complete.
Gaps and Red Flags in a Handyman Quote
Wiring, tap or gas work offered by someone with no licence number to show.
Drilling or fixing proposed at an address listed on the loose-fill register.
Getting Canberra Handyman Quotes on One Job List
Comparable quotes start with one written list that every handyman receives in exactly the same form. Number each job, add a photo and a measurement, and note the wall type where you know it, such as plasterboard, brick or tiles. Include the year the home was built, whether it is on the loose-fill register and whether you own or rent it. Mention parking, stairs, pets and any items you have already bought, such as a TV bracket or a flat-pack wardrobe. Three quotes prepared from the same list usually show a clear price range for the work.
Tools affect how quickly a handyman works, and many bring cordless tools that all share one type of rechargeable battery. Makita makes battery power tools on its LXT and XGT battery lines, alongside outdoor power equipment. Milwaukee makes hammer drills and drill drivers that run on its M18 and M12 batteries. Ryobi makes drill drivers, impact drivers and many other tools on its 18V ONE+ battery system. The brand matters less than whether the handyman owns the right drill bits for tiles, brick and steel. Ask whether specialist bits are charged on top, since drilling through tiles for a grab rail can need them.
Once quotes arrive, convert hourly prices into a likely total, using the hourly rate times the expected hours plus the call-out. Line up materials, GST and rubbish removal on each quote, because a low labour rate can hide extra charges. Lockwood makes entrance locks, door handles and padlocks for homes, and new hardware is often fitted during door repairs. Gainsborough makes door handles, deadbolts and smart locks, so name the exact product if you have already chosen one. Hills makes folding frame, retracting and rotary clotheslines, and clothesline installation is estimated at about $150 to $300 for labour. Keep the accepted quote, the invoice and any certificates together, since they are the record you will need if a repair later fails.
Handymen Across Canberra
Handyman prices on this page apply across Canberra. Jobs close to the main town centres rarely carry a travel charge, while outer suburbs and nearby rural areas sometimes do.
▶ North Canberra 16 areas
▶ South Canberra, Woden & Weston Creek 32 areas
▶ Belconnen 28 areas
▶ Gungahlin 18 areas
▶ Tuggeranong 20 areas
Canberra Handyman FAQ
How do I check a handyman's licence on the Access Canberra register?
Can a handyman hang shelves in a house on the loose-fill asbestos register?
Can a handyman remove a small piece of old fibro in Canberra?
Can a handyman install the ceiling insulation my rental needs?
Do I need my landlord's consent before a handyman puts up picture hooks?
Who changes the smoke alarm battery in a Canberra rental?
Does a garden shed built by a handyman need building approval in the ACT?
What is the minimum charge for a Canberra handyman visit?
Is a small handyman job covered by an ACT statutory warranty?
What can I do if a handyman's repair fails a few weeks later?
Canberra Handyman Specialists
Related Services
For Trades & Contractors - ACT
Handyman visits in Canberra often turn up work for other trades, such as a dripping tap, a worn power point or a lock that no longer turns. Links to those follow-up jobs across the ACT sit below, along with work for handymen and trades looking for new clients.
Compare Canberra Handyman Quotes
Tell us your suburb, the age of your home and the jobs on your list, and compare quotes from local Canberra handymen who are all pricing the same work.
Get Free Handyman QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across Australian Capital Territory? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.