Pricing a Paint Job in Canberra?
Tell us the rooms and outside surfaces, the number of storeys and the age of the house, and we will put you in touch with local painters who can price it.
Typical Costs
All figures are 2027 estimates for Canberra homes. Preparation, height, the paint system and any hazard testing decide where your job lands in each range.
House Painting Cost Canberra ACT - Room, Interior and Exterior Prices
House painting in Canberra is priced from what a painter can measure and from what they expect to find under the old paint. Our 2027 estimates put the walls of one room at $400 to $800, a three bedroom interior at $4,000 to $10,000 and a single storey exterior at $4,000 to $10,000. Two storey exteriors run from $8,000 to $15,000, and the largest houses can reach $30,000 once scaffold, wall area and window count are added. Feature walls are estimated at $150 to $500 and interior doors at $80 to $150 each, with deep colours and old enamel at the top. Square metre and linear metre rates cover weatherboards, face brick, fascias, fences and decks, so smaller jobs can be checked with a tape measure. Preparation is the biggest variable, because scraping, filling and priming an older brick veneer house can take longer than the coats themselves. Some costs sit outside every band here, including asbestos testing on homes built on or before 1990, lead-safe methods on old trims and licensed scaffold above four metres. Fences are estimated at $20 to $40 per square metre and deck staining at $25 to $60, before any repairs to loose boards or palings. Hourly rates, roof painting and removal work are only priced once a painter or specialist has seen the job. Quotes that show preparation, coats, products and access on separate lines are much easier to compare than single totals. Post your job on The Quote Yard and we will connect you with local painters across Canberra who can quote on it.
At a Glance - Canberra Painting Prices, 2027 Estimates
| Job | 2027 Estimate | Charged By | Main Price Driver | Line to Check |
|---|---|---|---|---|
| Walls of one room | $400 - $800 | Room | Patching and a new colour | Coats listed |
| Room with ceiling | $600 - $1,200 | Room | Ceiling stains and cornice cracks | Ceiling paint named |
| Feature wall | $150 - $500 | Wall | Deep colour needing a third coat | Undercoat tint |
| Three bedroom interior | $4,000 - $10,000 | Fixed sum | Doors, trims and furniture | Rooms listed one by one |
| Four bedroom interior | $6,000 - $12,000 | Fixed sum | House size and wall damage | Garage in or out |
| Single storey exterior | $4,000 - $10,000 | Fixed sum | Trims, eaves and scraping | Preparation per surface |
| Two storey exterior | $8,000 - $15,000 | Fixed sum | Scaffold or lift days | Access equipment line |
| Large house exterior | $15,000 - $30,000 | Fixed sum | Wall area and windows | Measured areas |
| Fascias and gutters | $15 - $30 per linear metre | Metre of length | Rust and height | Metres measured |
| Fence face | $20 - $40 per m² | Square metre | One side or both | Neighbour consent |
Where a Job Lands Inside Its Band
The bands on this page come from The Quote Yard ACT painting pages, widened where those pages disagreed, and none of them adds a premium for any district. Within each band, the price depends on how much preparation the surfaces need, how many coats go on, which product line is used and how high the painter must work. A plain room with sound walls in a similar colour sits at the bottom, while a room with cracked cornices, stained ceilings and a deep colour change sits near the top.
Outside, the age of the house can matter as much as its size. Timber trims, fibro (fibre cement sheet) eaves and old enamel on a house built on or before 1990 add hours, and possible testing, that a newer rendered townhouse does not need. Two storey walls bring scaffold or a lift into the price, and a footpath site can add a permit for public land.
Asbestos testing and removal, lead paint removal, roof painting and hourly rates have no band here and are quoted after an inspection.
What Painting Costs Across Canberra in 2027
Painters across Canberra price work by the room, by the square metre, by the metre of trim or as one sum for the whole house. Every figure on this page is a 2027 estimate drawn from The Quote Yard's ACT painting pages, and where those pages disagreed we widened the band to cover both. No suburb or district carries its own premium, so a bedroom in Ngunnawal and a bedroom in Narrabundah start from the same band. What moves a price within its band is the house itself, meaning its size, height, surfaces, age and the state of the old paint. For help choosing paint types, colours and finishes, start with our hub for painting services in the ACT.
Choosing and checking the person who does the work is a separate task, and our guide to hiring Canberra house painters deals with insurance, contracts and older home rules. Here the focus is on what each item costs, why two quotes for one house differ and how to compare them.
Interior Painting Prices by Room and Whole House
Painting the walls of one room is estimated at $400 to $800 in 2027, and including the ceiling lifts that to $600 to $1,200. Small studies with one window sit near the bottom of that band, while large living rooms with raked ceilings, which slope up under the roof line, sit near the top. Measured work is estimated at $15 to $35 per square metre of wall, which suits open plan areas that do not divide neatly into rooms. Interior doors are priced at $80 to $150 each, so on these estimates a hallway with six doors adds $480 to $900 before any wall is painted. Feature walls in a stronger colour are estimated at $150 to $500, and deep colours sit at the top because they can need a tinted undercoat, a base coat mixed toward the final colour. Ceilings priced on their own come in at $200 to $500 per room.
Whole interiors are priced as one sum, at $4,000 to $10,000 for a three bedroom house and $6,000 to $12,000 for four bedrooms. The spread reflects the number of doors, the condition of the walls and whether ceilings, skirting boards and the garage are included. Room figures on our interior painting page sit inside these totals, so a whole house figure can be checked against the rooms it lists. Specialty finishes take more steps than a plain colour, and Porter's Paints makes Alchemy Liquid Gold, a metallic paint for interior walls and woodwork.
Furniture is the other large variable inside a lived-in home. Moving beds, wardrobes and couches away from walls, covering floors and putting everything back can take as long as painting a small room. Clearing rooms yourself can lower the price, but only if the quote says furniture handling is excluded. Curtain rods, wall hooks and television brackets also need taking down and refitting, so agree who does that before the start date.
Ceilings are best priced on their own line because they take a different paint and more time per square metre than walls. Fine cracks along the cornice, the moulding where wall meets ceiling, need filling, and brown water marks from an old roof leak will bleed through new paint unless a stain sealer goes on first. Fix the leak before booking, because sealing a stain that is still damp will not hold. Bathroom and laundry ceilings with mould need cleaning and drying before any coat, and the exhaust fan should be checked so mould does not return under the new paint. Pricing each ceiling separately makes those extra steps visible on the quote.
| Item | 2027 Estimate | Charged By | Sits Higher in the Band When |
|---|---|---|---|
| Single room, walls only | $400 - $800 | Per room | Large room, many patches |
| Single room, walls and ceiling | $600 - $1,200 | Per room | Raked or stained ceiling |
| Interior walls | $15 - $35 per m² | Per square metre | Colour change or heavy filling |
| Interior door | $80 - $150 each | Per door | Both sides, frame and old enamel |
| Feature wall | $150 - $500 | Per wall | Deep colour or metallic finish |
| Ceiling | $200 - $500 per room | Per room | Water stains needing a sealer |
| Full interior, three bedrooms | $4,000 - $10,000 | Fixed sum | Many doors and trims |
| Full interior, four bedrooms | $6,000 - $12,000 | Fixed sum | Garage and stairwell included |
How a Canberra Painter Builds the Number
A painting quote is built from three things: the quantity of each surface, the preparation it needs and the number of coats in the paint system. Walls and ceilings are measured in square metres, doors and windows are counted as items, and fascias, the boards behind the gutters, are measured in linear metres, which means metres of length. The painter then estimates the hours for each part, adds paint and materials, and adds any access equipment such as scaffold or a mobile platform. Some painters show the result as one fixed sum, while others show the rates and quantities behind it. A fixed sum is easier to budget for, but visible rates make it easier to see exactly where two quotes differ.
Small jobs are sometimes priced from a minimum charge instead of a room rate, because setting up drop sheets and ladders takes the same time for one wall as for three. A touch-up in two rooms can therefore cost close to the price of one full room. Grouping small jobs into one visit spreads that set-up time across more work.
Labour can vary more than any other part between painters, because each one judges preparation time differently. Paint costs vary as well, since a premium product line or a deep tint costs more per litre than a standard white. If you want to see the split, have the paint and the labour shown on separate lines.
Four Parts Behind Every Painting Figure
Quantities come first, as square metres of wall, a count of doors and windows, and metres of fascia, gutter and fence. Preparation hours come next, covering washing, scraping, filling, sanding, priming and sealing gaps for each surface. The paint system follows, meaning the primer or undercoat, the number of topcoats and the product line chosen.
Access is the fourth part, from ladders on a single storey home to scaffold or a boom lift on a two storey one. When one quote is much higher than another, look at these four parts first, and a quote that shows all four makes the cause easy to find.
A whole house sum should still list every room and outside surface it includes, even when no rates are shown.
Exterior Repaint Prices by Storeys and House Size
Our 2027 estimate for a single storey exterior repaint is $4,000 to $10,000, and for a two storey house it is $8,000 to $15,000. Our exterior painting page also uses house sizes, at $4,000 to $8,000 for a small house, $8,000 to $15,000 for a medium one and $15,000 to $30,000 for a large one. That page does not define each size by floor area, so treat the size bands as a rough guide and the storey bands as the firmer check. The step up between one and two storeys comes from height, because upper walls and eaves need scaffold or a platform as well as more hours. Long single storey houses with eaves on all four sides, plenty of windows and a carport can sit at the top of their band. Compact brick houses with aluminium windows and few timber trims can sit near the bottom.
Each exterior sum should list every part it covers, not only the walls. Around a brick veneer or rendered house, that means eaves linings, fascias, barge boards on the sloping roof edges, gutters, downpipes, window frames, doors, the meter box cover and any pergola posts. Downpipes run the full height of the wall and need cleaning, priming where rusty and painting on every face, so count them before the painter visits. If a part is missing from one quote and present in another, the cheaper total may simply be smaller in scope.
Exterior bands assume the walls and trims are sound enough to paint. Rotten fascias, rusted gutters and cracked render are repaired first by other trades, and those repairs are priced on their own.
| House | 2027 Estimate | What Pushes It Up | What Keeps It Down |
|---|---|---|---|
| Single storey house | $4,000 - $10,000 | Long eaves, timber trims, carport | Face brick left bare, few trims |
| Two storey house | $8,000 - $15,000 | Scaffold days, upper gables | Level ground, easy set-up |
| Small house | $4,000 - $8,000 | Flaking timber windows | Aluminium windows |
| Medium house | $8,000 - $15,000 | Several tall walls | Simple roof line |
| Large house | $15,000 - $30,000 | Wall area, windows, access | Sound paint, light preparation |
Weatherboard, Brick and Roof Edge Rates per Metre
Weatherboard walls are estimated at $35 to $55 per square metre, more than brick because every board edge is scraped, filled and cut in, which means painted by hand along the line. Painting face brick is estimated at $25 to $45 per square metre, and bare brick absorbs a heavy first coat because it is porous. Fascias and gutters are priced at $15 to $30 per linear metre, so a low house with eaves on every side can carry a larger roof edge line than its walls suggest. At those rates, 60 metres of roof edge comes to $900 to $1,800 for that line alone. Painting face brick for the first time is hard to undo, and one registered heritage precinct entry rules it out altogether.
Rendered walls have no separate per metre band on our source pages, so get a measured price for them. Cracked or drummy render, meaning render that sounds hollow when tapped, is repaired by a rendering and texture coating trade before the painter starts. Gutters that have rusted through will keep leaking after a coat of paint, so gutter replacement belongs ahead of the repaint.
Eaves linings and timber gable ends, the triangular walls under a pitched roof, can be folded into the whole exterior sum, but they take time because the painter works overhead or at height. Older eaves linings may be fibre cement or asbestos cement sheet, so their age changes how they can be prepared. Gable ends can need scaffold even on a single storey house. Barge boards along the sloping roof edge are measured with the fascias by the linear metre. Listing each of these on the quote stops one painter including them while another quietly leaves them out.
| Surface | 2027 Estimate | Unit | Worked Example |
|---|---|---|---|
| Weatherboard walls | $35 - $55 | Per m² | 40 m² comes to $1,400 - $2,200 |
| Face brick, first paint | $25 - $45 | Per m² | 80 m² comes to $2,000 - $3,600 |
| Fascias and gutters | $15 - $30 | Per linear metre | 60 metres comes to $900 - $1,800 |
| Rendered walls | Measured quote | Per m² or fixed | Repairs priced first |
Fence and Deck Coating Prices
Fence painting is estimated at $20 to $40 per square metre of fence face, and deck staining at $25 to $60 per square metre of deck. A paling fence 30 metres long and 1.8 metres high has a face of 54 square metres, which comes to an estimated $1,080 to $2,160 for one side. Coating both sides doubles the area, so speak with your neighbour before their side appears on the quote. Rough sawn palings absorb a lot of stain, and Resene makes Waterborne Woodsman Penetrating Oil Stain, which its own project guide shows on a timber fence. Decks cost more per square metre than fences because the boards are cleaned, sometimes sanded and coated several times. Haymes makes Dexpress Deck & Timber Stain, a low sheen stain with a soft shine, and Cabot's makes Natural Decking Oil, an oil based finish that soaks into the boards.
Coverage figures help you check how much product a deck quote allows for. Intergrain makes Heavy Duty, a water based exterior timber finish, and lists coverage of about 10 square metres per litre, applied as three coats four hours apart. That works out at about 3 litres per coat on a 30 square metre deck and about 9 litres in total, before allowing for weathered boards that absorb more. Listing one coat of a product whose maker calls for three is not pricing the same job as listing all three. Loose boards and soft joists are carpentry, and decking builders can quote on repairs before any coating goes on.
Spraying can be quicker on long fences and plain walls, but it needs more masking with tape, plastic and screens. Guidance on painting pollution from Access Canberra says spray paint must not drift onto other properties or public land. On a windy day, a painter may switch to brush and roller on the side facing a neighbour, a footpath or parked cars. That change of method takes longer, so agree in advance how it affects the price. Naming spray or brush for each surface on the quote makes those choices clear from the start.
| Job | 2027 Estimate | Worked Example | Point to Settle |
|---|---|---|---|
| Fence, one side | $20 - $40 per m² | 54 m² face comes to $1,080 - $2,160 | Posts and rails in or out |
| Fence, both sides | $20 - $40 per m² | 108 m² comes to $2,160 - $4,320 | Neighbour agreement in writing |
| Small deck | $25 - $60 per m² | 20 m² comes to $500 - $1,200 | Cleaner and number of coats |
| Medium deck | $25 - $60 per m² | 30 m² comes to $750 - $1,800 | Litres of product allowed |
Where Preparation Time Goes on an Older House
Two painters can quote very different sums for the same house because they plan different preparation. One may allow a wash and a light sand, while another allows scraping every flaking trim, filling cracks, priming bare timber and caulking, which means sealing gaps with a flexible filler. On a 1970s or 1980s brick veneer house, the timber window frames, fascias and gable ends can take longer to prepare than to paint. Inside, cracks along the cornice and old water stains need filling or a stain sealer before the topcoat. Glossy old trim paint may be oil based, and a water based enamel, the hard paint used on trims, laid over it can peel unless the surface is sanded and primed. Preparation listed surface by surface shows you what the price really covers.
Walls must be clean and dry before any coat goes on, so washing is part of preparation. Heavy grime on paths and paving can be booked as a separate pressure cleaning job, which keeps the painter's hours on the walls. Fibro eaves on a house built on or before 1990 should be tested before anyone uses a high pressure water blaster on them.
Layout adds time as well as surface condition. Split level houses, with rooms on several floor levels, need more ladder moves and more cutting in around stair voids than a single level home of the same size. Mention any split levels, raked ceilings or high stairwells in your brief, so every painter allows for the extra hours.
Preparation Items That Change the Price
Scraping and sanding flaking timber trims, window sills and gable ends is slow work, and it is priced by the hour inside the total. Filling cracks in plaster, cornices and timber, then sanding the fills smooth, adds a second visit when deep fills need time to dry.
Priming bare timber, patched plaster and glossy old enamel adds a full coat to those areas. Sealing stains from old roof leaks needs a stain blocking primer, and caulking gaps around frames and skirting boards takes time along every joint.
Where a quote says only full preparation, get the painter to write what that means for each surface.
Primer, Topcoats and Paint Product Choice
A repaint in a similar colour over sound walls can be priced as two topcoats with spot priming, but bare, patched or stained areas need a full primer or sealer first. Taubmans makes Easycoat Sealer & Undercoat, a first coat that seals bare surfaces, and lists it as touch dry in 30 minutes with a recoat time of 2 hours. Each extra coat adds labour across every wall, so a change from a deep colour to a pale one can add a coat to the whole house. New plasterboard needs more, and a Dulux guide recommends one prepcoat, which is a preparation coat, and two topcoats. Dulux makes Professional FastFinish, a prepcoat named in that guide for the smoothest plasterboard finish, known as Level 5.
Product grade changes the materials line as well. Haymes makes Elite Interior Low Sheen, a scrubbable interior wall paint, and Resene makes SpaceCote Low Sheen, a waterborne enamel for interior walls. Ceilings take their own paint, and Dulux makes Professional Ceiling Flat, a flat ceiling paint with no shine, and Wattyl makes Aqua Trim for doors, skirting boards and window frames. Naming the product line on each quote lets you compare like with like, because the words premium paint can mean different products to different painters.
Leftover paint is worth keeping for touch-ups, so the quote should say who keeps the part-used tins. Label each tin with the room, the colour name and the date, because matching a colour years later is far easier with the original product. Write the product names and colour codes on the final invoice as well.
| Situation | Coats to Expect | Effect on Price |
|---|---|---|
| Sound walls, similar colour | Spot prime, two topcoats | Lower end of the band |
| Pale colour over a deep one | Tinted undercoat, two topcoats | An extra coat on every wall |
| Deep feature colour | Up to three coats | Top of the feature wall band |
| Patched or bare plaster | Sealer, two topcoats | Extra coat on patched areas |
| New plasterboard | Prepcoat, two topcoats | Full three coat system |
| Glossy old enamel trims | Sand, primer, two enamel coats | More hours per door and frame |
| Water stained ceiling | Stain sealer, ceiling paint | Sealer added to the ceiling line |
Scaffold, Boom Lifts and Street Permits in the Price
Height is the main reason a two storey exterior costs more than a single storey one. WorkSafe ACT treats work with a risk of falling more than two metres as high risk construction work, which needs a safe work method statement (SWMS), a written plan of the hazards and controls. Scaffolding more than four metres high must be put up, altered and taken down by a competent person with a high risk work licence, so a two storey job may carry a separate scaffold line. Genie makes articulated boom lifts, platforms on a jointed arm that can reach over balconies and awnings, and operating one with a boom of 11 metres or more also needs that licence. Lift hire is charged by the day, so a quote should state how many days it allows.
Scaffold or materials on a footpath or verge outside an apartment block or shop need a permit to use public land. City Services issues these permits under the Public Unleased Land Act 2013 and assesses applications within 28 days of receiving all documents, unless more consultation is needed. Fees are charged per square metre per day by zone, with the current table on the City Services website. Find out which painter applies for the permit and whether the daily fee is inside the quoted price.
Before comparing access lines, read about ladder and scaffold safety in our guide to Canberra house painters. On the quotes themselves, check which access method each painter has allowed for.
Clearing the ground along the walls before the first day saves paid time. Move cars, bikes, pot plants, outdoor furniture and woodpiles away from where ladders or scaffold will stand. If scaffold must stand on a lawn or garden bed, boards under the base plates, the flat feet of the scaffold, keep it level and protect the ground. Arriving to a clear site means the painter spends the first hours painting, not shifting your belongings.
| Access | Suits | Rule or Permit | How It Shows on a Quote |
|---|---|---|---|
| Ladders | Single storey eaves and trims | Light duty work only | Inside the labour price |
| Mobile scaffold | Long single storey runs | Erected by a competent person | Hire and set-up time |
| Fixed scaffold over 4 m | Two storey walls and eaves | High risk work licence | Separate hire line |
| Articulated boom lift | Balconies, awnings, high gables | Licence for booms of 11 m or more | Days of hire |
| Materials on a footpath | Unit blocks and shops | Public unleased land permit | Daily fee per m² |
Scope by Home Type Across Canberra
Prices do not change by suburb, but the type of home changes what a painter has to allow for. Older brick veneer houses bring timber window frames, fascias, eaves linings and sometimes unpainted face brick, which all add preparation. Newer two storey houses and townhouses in suburbs such as Taylor, Coombs and Throsby have fewer layers of old paint but more height, voids over stairs and render or cladding with its own paint system. Inside an apartment, the owner books and pays the painter for the rooms, while outside walls and shared stairwells are work for the owners corporation, the body made up of all the unit owners. Heritage cottages in Reid, Braddon and Forrest carry timber joinery, sash windows and colour decisions that may need ACT Heritage advice before paint is ordered. None of these types carries a fixed premium in our bands, and the difference shows up in the preparation, access and approval lines.
Interior jobs in apartments fit the room bands above, and whole house work can be compared on our house painting page. Where a renovation also needs new linings or trims, a Canberra carpenter finishes that work before the painter starts.
| Home Type | Surfaces to Price | Extra Lines That May Appear | Bands to Use |
|---|---|---|---|
| Older brick veneer house | Timber trims, fascias, eaves, face brick | Scraping, priming, asbestos test | Single storey and brick rates |
| Newer two storey house | Render or cladding, high eaves | Scaffold or lift days | Two storey exterior |
| Townhouse in a unit complex | Interior rooms, own trims | Owners corporation consent outside | Room and door rates |
| Apartment interior | Walls, ceilings, doors | Lift booking and parking | Room and whole interior |
| Heritage cottage | Joinery, sashes, verandah posts | Heritage advice, lead-safe work | Exterior and door rates |
Asbestos and Lead Work Priced Outside the Bands
ACT Government advice says a house built on or before 1990 has a high chance of containing asbestos, and its suburb construction date map is on the ACT asbestos website. Fibro eaves, wet area walls and textured coatings of unknown make-up may need testing before preparation can be priced. Testing is done by a separate business and is not in any band on this page, so book asbestos testing and inspection before painters visit if the materials are unknown. Removal is licensed work, and the national 10 square metre exception does not apply in the ACT, so asbestos removal is quoted on its own. Cement sheet in good condition can be cleaned by hand, without high pressure water or power sanders, and then painted in the usual way.
Lead household paints were used before 1970, so trims and doors in older homes may carry lead under newer coats. Lead-safe methods, such as wet scraping and wet sanding to keep dust down, are slower than dry sanding and need plastic sheeting and a careful clean-up. The national Lead Alert guide says dry sanding and dry abrasive blasting should not be used to remove lead paint, so a quote allowing them on old trims is pricing the wrong method. Nilfisk makes the VHS 42 range of H class vacuums, rated for hazardous dust, and a quote for lead-safe work can name the extractor the painter will use. The same guide says laboratory testing of paint chips is the most reliable way to find which surfaces contain lead.
Covering intact lead paint with new lead-free paint is one of the two options the ACT Government lists, and it avoids the slow removal methods above. For household safety steps during lead work, read the older homes advice in our guide to hiring a painter in Canberra.
Homes still on the ACT register for loose-fill asbestos, a loose insulation once blown into roof spaces, are a different case altogether. Work on those houses is limited to works essential for health, safety or reasonable living conditions, and nobody should enter the roof space without advice from a licensed asbestos assessor. None of the bands on this page applies to a listed home.
Hazard Costs Quoted Separately
Asbestos sampling and laboratory results come from a testing business, and the painting price should be confirmed once those results are back. Licensed removal, and the clearance inspection that follows it, are quoted by the removalist and the licensed asbestos assessor.
Lead paint testing, lead-safe preparation and the bagging of lead waste can add a line to the preparation price on pre-1970 trims. On a small job, assuming lead is present and pricing lead-safe methods throughout can be simpler than testing every surface.
Agree in writing how the price changes if a test comes back positive, before any paint is ordered.
Heritage Advice and Owners Corporation Timing
Several inner suburbs contain registered housing precincts, including parts of Reid, Braddon, Ainslie, Kingston, Griffith and Forrest, and each precinct entry is on the ACT Government website. Work on a registered place may need approval, and the ACT Government does not say whether repainting in existing colours is exempt. Contact ACT Heritage on 13 22 81 before ordering exterior paint for a registered house. Heritage advice can change the colours, the products and the start date, so each quote should say which items depend on it.
In a unit complex, the owners corporation must maintain the common property, so outside walls and shared stairwells are its work and its cost. Under the Unit Titles (Management) Act 2011, a complex with four or more units must keep a sinking fund, a savings fund for major maintenance, with a plan covering 10 years. Payments from the fund must be consistent with that plan, so a repaint left out of it may need the plan changed first. Under the default rules, altering a unit or the common property needs permission from the owners corporation, given by special resolution, which needs more than 75 per cent of owners to agree. Meeting dates and resident notices set the timetable, so a quoted price for a unit block should stay open long enough for the vote.
A colour sample panel painted on one wall of the building lets owners see the new scheme on their own walls before scaffold goes up on every face. The owners corporation can then approve the panel in writing, which settles the colour before the full price is committed. The panel itself is a small cost, and it can be listed as its own item on the quote.
Approval Steps That Move the Start Date
For a house in a registered precinct, check the register entry, then ask ACT Heritage about the colours and products before any paint is bought. Painters can still inspect and quote while you wait, as long as the quote marks which items depend on that advice.
For a unit block, the owners corporation confirms the scope, checks the sinking fund plan and arranges any vote at a general meeting. Staging a large repaint by building face across more than one budget year keeps each payment tied to finished work.
Get any heritage advice or owners corporation approval in writing and keep it with the signed quote.
Cure Times and Maker Deadlines on Newer Homes
New render, plaster and cladding can only be painted once the maker's conditions are met. Dulux makes AcraTex Sedona, a sand texture coating, and states that cement render should cure for 28 days before it is coated. Weathertex makes pre-primed weatherboards whose factory primer is designed to be painted within 60 days of installation, with at least two full coats. James Hardie makes Axon cladding, and its installation guide says the panels must be painted within three months of fixing, with two coats of quality acrylic. Weathertex says a late paint job weakens the primer's bond and may void the warranty.
For a home finished in the last two years, a paint fault caused by poor workmanship may fall under the builder's statutory warranty. ACT statutory warranties, described on the ACT planning website, cover residential work costing $12,000 or more that required building approval, with two years for non-structural parts. Report the fault to the builder in writing before paying for a repaint, so you do not pay for work the builder may have to fix.
Plasterboard in a new home is finished to a level set out in AS/NZS 2589, the gypsum lining standard sold through Standards Australia. A Dulux guide to that standard calls Level 4 the default for painted walls and says most homes are finished to it. Level 5 is the highest level, needed where strong side light or spotlights fall across flat or low sheen walls. Lifting a Level 4 wall to Level 5 is extra work, so it should be priced as a separate item on the quote.
Rockcote makes Quicksand Coarse, a flexible acrylic texture coating, and texture coatings like it are priced differently from flat paint. Keep the installation date and cladding brand with your house papers, so each painter can price the right preparation.
| Surface or Product | Maker's Condition | Effect on Booking |
|---|---|---|
| Cement render under AcraTex Sedona | Cure 28 days before coating | Painter books after the cure |
| Weathertex pre-primed boards | Paint within 60 days, two full coats | Book the painter early |
| James Hardie Axon cladding | Paint within three months of fixing | Book before the deadline |
| Easycoat Sealer & Undercoat | Recoat after 2 hours | Two coats can go on in one day |
Jobs Priced Only After an Inspection
Some painting costs have no published band on the ACT pages behind our estimates, so we do not give a figure for them. Hourly and day rates are the main example, and a painter charging by the hour for small jobs should state the rate, any minimum charge and the expected hours in writing. Roof painting is a separate trade, and a roof restoration business quotes after inspecting the tiles or sheets. Eaves, window frames and skirting boards priced per metre, plaster repairs, wallpaper removal and texture coatings are also priced after someone has seen them. Asbestos testing, asbestos removal and lead paint removal are quoted by whoever does that work.
Cracked plasterboard and cornices are repaired by a plastering and Gyprock repair trade, or by the painter if the quote says so. Garage floors take a different product, and an epoxy garage floor coating is priced separately from wall paint. Listing these items on separate lines stops their cost being folded into a whole house sum.
Old wallpaper sometimes turns up under paint or behind furniture once a room is cleared. Removing it, washing off the glue and repairing the plaster underneath can take longer than painting the room, and the time depends on what comes away. Fair quotes name a rate or an allowance for this work instead of guessing a fixed sum.
| Item | Why No Band Is Given | Who Prices It | Get in Writing |
|---|---|---|---|
| Hourly or day rate | No ACT source page publishes one | The painter | Rate, minimum charge, hours |
| Roof painting | Separate trade and inspection | Roof restoration business | Roof area and coating system |
| Trims priced per metre | No published per metre figure | The painter | Metres measured and coats |
| Plaster repairs and wallpaper removal | Depends on damage found | Painter or plasterer | Each repair listed |
| Asbestos testing | Specialist work | Testing business | Samples and report date |
| Asbestos or lead paint removal | Licensed or specialist work | Removalist or specialist | Method, waste and clearance |
GST, Deposits and Stage Payments
GST, the goods and services tax, is a 10 per cent tax on most goods and services, and a business must register once its GST turnover reaches $75,000 a year. A painter registered for GST includes it in the price, and the ATO says a business must be registered for GST to issue a tax invoice. The ACCC, the Australian Competition and Consumer Commission, says businesses must display a total price that includes taxes and unavoidable fees as a single figure. The free ABN Lookup record shows whether a business is registered for GST and from what date. When two quotes differ only because one adds GST at the end, compare them on the GST inclusive totals.
No ACT law we found caps the deposit a painter can ask for, so the amount comes from the contract you sign. A deposit tied to paint ordered for your job is easier to justify, and the quote can show that sum as its own line. Stage payments can follow finished parts of the job, such as the exterior walls, then the trims and eaves, then the inside rooms. Keep the final payment for after a walk-through, when you and the painter list the touch-ups still to do.
Changes made partway through, such as adding a room or replacing a rotten sill, should be agreed in writing with a price before the work is done. Even an email from the painter, confirmed by your reply, is enough of a record. Without it, an argument about an extra charge is hard to settle later.
A Payment Schedule Tied to Finished Work
A clear schedule names the deposit as a dollar figure, says what it pays for and links each later payment to a finished stage you can check in person. The last payment follows a walk-through, once runs, missed spots and paint on glass have been fixed.
Pay by bank transfer to the business named on the quote, and keep a receipt showing the amount, the date and the ABN. Cash with no receipt is hard to prove if the job stops partway through.
Check that the GST shown on each invoice matches the GST inclusive total on the signed quote.
What to Look Out For in a Canberra Painting Price
A quote far below the others can leave out preparation, a primer coat or a second topcoat, so compare what is written before you compare totals. Watch for a single lump sum with no list of rooms or surfaces, because it cannot be checked against the bands on this page. Square metre and linear metre rates are only useful when the measured quantities are written beside them. Exclusions in small print, such as filling, moving furniture, removing wallpaper or painting the garage, can add cost once work starts. Quotes with no expiry date or start window leave the price open if the painter's bookings change. Products described only as premium paint, with no maker or product line, cannot be checked against a data sheet.
Prices well above every band deserve questions too, since they may include scaffold, repairs or a specialty finish that another painter left out. Find out what each item above the band covers before ruling that quote out. A higher price with a full written scope can be better value than a lower one with none.
Gaps That Turn Into Extras Later
One total with no list of rooms, surfaces or coats gives you nothing to check against the 2027 bands. Rates with no measured quantities beside them can change once the painter starts, so the areas and metres should be written in.
Missing lines for scaffold, permits, testing or furniture handling can turn into extras later in the job. A large deposit due before any paint is ordered, with no stated purpose, puts more of your money at risk.
A low quote is not always a poor one, but it should be checked line by line for missing preparation and coats.
Setting Canberra Painting Quotes Side by Side
Send every painter the same written brief, with your suburb, the number of storeys, the rooms and outside surfaces, the colours and the approximate build year. Add measurements you can take yourself, such as the deck area, the fence length and height, and the length of roof edge. When the quotes arrive, set them side by side under the same headings: preparation, coats, products, access, exclusions, GST and payment stages. Mark any line one painter included and another left out, and get a price for that line from the painter who left it out. Compare the totals only once every quote covers the same list.
Watch what each painter does during the site visit, because it affects how reliable the price is. Painters who measure the walls, test flaking paint with a scraper, look under the eaves and ask when the house was built are pricing what is actually there. Those who quote from the driveway without walking around can miss work that later returns as an extra charge. Note how many painters will be on the job and how many days it should take, since that shows how the labour line was built.
Invite at least three painters and give each the same deadline, so every price reflects the same timing and the same paint costs. Ask how long each quote stays open and when the painter could start, since a lower price that cannot start for months may not suit you. If you change the brief after the first visit, send the change to every painter, not just one. Small differences in the brief can explain large differences in price. Keeping one written version of the job avoids that problem.
Price is one part of the decision, and the checks on insurance, the contract and older homes are in our guide to hiring a painter in Canberra. Bathrooms that keep spoiling their paint need a waterproofing specialist to find the cause before another repaint. Light switches and power points that must be moved are work for a Canberra electrician, booked ahead of the painter so the patches are painted in one visit.
Painting Prices Across Canberra
These 2027 painting estimates apply across Canberra, from Gungahlin and Belconnen to Woden and Tuggeranong. Two storey homes in suburbs such as Throsby or Coombs can cost more outside because scaffold or a lift is needed for the upper walls and eaves.
▶ North Canberra 16 areas
▶ South Canberra, Woden & Weston Creek 32 areas
▶ Belconnen 28 areas
▶ Gungahlin 18 areas
▶ Tuggeranong 20 areas
Canberra Painting Cost FAQ
What does it cost to paint a single bedroom in Canberra?
Is scaffold included in a Canberra exterior painting price?
Does painting face brick cost more than repainting weatherboards?
How much stain should a deck quote allow for?
Why is there no hourly rate for painters on this page?
Will asbestos testing be part of my painting quote?
Where does GST show up on a Canberra painting quote?
Can a unit block repaint be paid from the sinking fund?
How long must new render wait before it is painted?
Is a feature wall much cheaper than painting the whole room?
Canberra Painting and Surface Specialists
Related Services
For Trades & Contractors - ACT
Painting prices in Canberra can depend on work done first by other trades, from carpentry on rotten fascias to licensed asbestos removal on old eaves. Painters looking for work can also browse current ACT painting jobs.
Compare Canberra Painting Prices
Describe the rooms and outside surfaces, the number of storeys and the age of the house, and compare prices from local painters who are all quoting the same job.
Get Free Painting QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across Australian Capital Territory? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.