Typical Costs

$700 - $2,500
For a supplied and installed sliding or stacking security door on a NSW patio or alfresco opening, varying by the span, the number of panels, the mesh and frame, the track and rollers, and the lock. A single sliding security door sits at the lower end, a double slider above it, and a multi-panel stacking screen across a wide alfresco opening higher again, with a whole-opening package running into the thousands.
Single sliding security door$700-$1,500
Double sliding security door$1,200-$2,200
Stacking security door (3-4 panel)$1,800-$3,500
Sliding security flyscreen$250-$600
Stainless mesh upgrade+$200-$600

Prices are estimates based on typical NSW market rates in 2026 and vary by the width of the opening, the number of panels, the mesh and frame, the track and rollers, the lock, and whether the door is tested to the Australian Standard. A double slider, a multi-panel stacking screen or a wide alfresco span costs more than a single sliding door, and a coastal site changes the materials needed. Always confirm the span and panel count, the mesh and the certification, and what the quote includes, and get it in writing.

Sliding and Stacking Security Doors Costs NSW 2026 - Get Free Quotes

Sliding and stacking security doors secure the wide patio and alfresco openings of a NSW home while still sliding open for airflow and access, in stainless steel mesh, perforated aluminium or aluminium grille. A genuine sliding security door is tested to the Australian Standard AS 5039 and built with a heavier frame, quality rollers and an anti-lift track to carry the span. This guide covers what sliding and stacking security doors cost in 2026, the door types, mesh and the brands behind them, the tracks and locks, the standards, and how to choose an installer. Post your job on The Quote Yard for quotes across NSW.

AS 5039 Tested Wide-Opening Spans

Sliding and Stacking Security Doors Across NSW

Detailed pricing and scope for sliding and stacking security doors on NSW homes, covering the single, double and multi-panel stacking types, the mesh and frame options and the brands behind them, the tracks, rollers and anti-lift locking, the Australian Standards, how the screens pair with glass sliders and stackers, coastal durability, and how to choose an installer, explained for Sydney, Newcastle, Wollongong, the Central Coast and regional New South Wales.

Get Free Quotes

At a Glance - Sliding and Stacking Security Doors NSW 2026 Costs

Service / ItemTypical CostTypical TimeframeScopeWho
Single sliding security door$700-$1,500Half to full dayPatio openingScreen installer
Double sliding security door$1,200-$2,200Full dayWide patioScreen installer
Stacking security door (3-4 panel)$1,800-$3,5001-2 daysAlfresco spanScreen installer
Sliding security flyscreen$250-$600Per panelInsect screenScreen installer
Stainless mesh upgrade+$200-$600-Tested meshScreen installer
Whole-opening package$2,500-$8,0001-2 daysScreens + tracksScreen installer

What Drives Sliding and Stacking Door Pricing in NSW

Cost is driven by the width of the opening, the number of panels, the mesh and frame, the track and rollers, and the lock. A single sliding door is at the lower end, while a double slider, a multi-panel stacking screen or a very wide alfresco span costs more for the heavier frame, the extra panels and the stronger track needed to carry the weight without sagging. A tested stainless mesh, a coastal-grade finish and an anti-lift centre lock all add to the figure. The more the door is built to span the opening, slide smoothly for years and resist lifting and levering, the more you are paying for a screen that works and lasts rather than one that drops and jams.

In NSW, security doors are tested and certified to the Australian Standards published by Standards Australia, and consumer and contract matters sit with NSW Fair Trading.

Get Sliding Screen Quotes

Connect with screen installers across NSW who can measure your patio and alfresco openings, supply single, double or stacking security doors tested to AS 5039, fit quality tracks, rollers and an anti-lift centre lock, and back the work with a warranty, across Sydney, Newcastle, Wollongong, the Central Coast and regional NSW.

Get Free Quotes
Free · No obligation · NSW-wide

What Sliding and Stacking Security Doors Cover

Sliding and stacking security doors are the screens that secure the wide patio, alfresco and balcony openings of a NSW home, the openings a standard hinged door cannot cover. They run on a track rather than swinging, so they hold a broad opening while still sliding aside for access and airflow. A single sliding security door covers a standard patio slider, a double slider a wider opening, and a multi-panel stacking screen a full alfresco span where the panels slide and stack to one side. What they share is a heavier frame, a quality track and roller system, and a lock built to handle a moving door across a large gap. This page is the New South Wales guide to that product, from the door types and the mesh to the tracks, the locking and what it all costs.

It is written for owners weighing up how to secure a patio or alfresco opening, the part of the home most lived through in a NSW summer. The aim is to make the door types, the hardware and the prices clear enough to brief a job and compare quotes. These doors exist because the patio opening is both the best and the most awkward part of a home to secure. A wide glazed opening is the heart of indoor-outdoor living and the main source of summer cross-ventilation, yet it is also the largest single weak point an intruder could try.

A sliding or stacking security screen resolves that, letting the glass doors stand open for air while a locked screen holds the opening. It is the product that lets a NSW home live open in summer without being open to anyone outside. A sliding security door almost always runs alongside an existing glass slider rather than replacing it. The security screen has its own track in the same frame, so the glass door and the screen move independently, and the underlying glass door is covered under sliding door installation and repairs. The two are designed as a pair, which is why a new or reconditioned glass slider and a security screen are often planned together. Getting the tracks and the frame right for both at once avoids a screen that fouls the glass door or runs poorly.

Stacking security screens take the same idea to a wider span, matching the multi-panel glass doors that have become common on new NSW homes. Where a glass stacker or bifold opens a whole wall to the outdoors, a stacking security screen mirrors it so the opening can be thrown wide and still secured, pairing with the stacker and bifold door installation and repairs behind it. The panels slide and gather to one side, clearing most of the opening.

These are the most involved screens to make and fit, since the span, the weight and the panel count all rise together. Alongside the security screens sit the lighter insect versions for the same openings. A sliding security flyscreen or a sliding door flyscreen replacement keeps insects out without the security rating, and many openings end up with both an insect screen and a security screen in the same frame. For most NSW homes the practical package on the main patio is one well-built sliding or stacking security door, sized to the span and matched to the glass doors behind it. The insect screen is a separate, cheaper layer added where it is wanted.

Why a Tested Sliding Security Door Matters

The patio opening is the place where a tested screen matters most, because it is the largest and often the most accessible opening on the home. A wide sliding door at the rear, out of sight of the street, is exactly where an intruder would prefer to work, and a screen that only looks secure invites the attempt. As with any security screen, the word counts for nothing unless the product has been tested, and on a big sliding opening the consequences of getting it wrong are larger. A wide sliding opening carries more weight and a longer span than a hinged door, so the engineering has to be right or it sags. The bigger the opening, the less forgiving it is of a light frame or cheap rollers.

This is the opening to secure with a genuinely tested door, not a token one. A common false economy is to spend on a heavy front security door and fit a flimsy screen on the much larger rear opening. The patio is where an intruder would actually choose to work, so it is where the tested door belongs. The benchmark is the AS 5039 series, with performance in AS 5039.1:2023 and the test methods in AS 5039.3:2023, both published by Standards Australia. A sliding security door is tested to the same trials as a hinged one, scaled to the opening, so it must resist impact, levering, pulling, probing and cutting before it can be sold as a security screen.

A screen that has not been tested is a barrier whatever its size, and on a patio that barrier is the easiest one in the house to defeat. The certificate, in writing, is what separates the two. Sliding doors add a specific weakness that the tests and the hardware have to address, which is lifting. Because the door runs on rollers in a track, a poorly made one can be lifted off its track and removed entirely, bypassing the lock, which is why an anti-lift device and a properly designed track matter as much as the mesh. A tested sliding door is built so it cannot be jemmied up and out, and a good installer confirms the anti-lift detail rather than leaving it to chance. The lift attack is the one most often forgotten on a sliding screen.

The lock on a sliding security door is also different from a hinged one and worth understanding. Instead of a three-point lock down the edge, a sliding door usually locks at the centre stile with a hook bolt or a multi-point mechanism that engages the frame, holding the moving panel shut against being forced sideways. The quality of that centre lock, and how it engages, is a large part of what a tested sliding door is proving. A weak centre catch on an otherwise strong screen is the obvious place an attack succeeds.

A good supplier explains how the centre lock engages the frame and how it resists being forced sideways. If the lock is described only as a lock with no detail, it is worth pressing for more. For a buyer the takeaway is to treat the patio screen as the priority, not an afterthought. The front door often gets the attention and the budget while the larger, more hidden patio opening is left with a token screen, which is the wrong way around. A tested sliding or stacking door, with anti-lift and a proper centre lock, is the part of the wider home security picture that closes the biggest opening. Spending on this opening usually does more for real security than another lock on an already-solid front door.

Sliding, Stacking, Mesh and the Brands Behind Them

There are three sliding and stacking configurations to know, and the right one follows the glass doors behind it. A single sliding security door is one moving panel that slides past a fixed one, suited to a standard patio slider. A double sliding door has two moving panels meeting in the centre, for a wider opening, and a stacking security screen has three or more panels that slide and gather to one side, matching a glass stacker across a full alfresco span. The wider and the more panels, the heavier the frame and the more the track and rollers have to carry.

The mesh choices are the same three families as for any security screen, with the span making the frame and stiffness matter more. Woven marine-grade 316 stainless steel mesh is the premium option, giving a near-invisible view across a wide opening and strong cutting resistance, and it is the technology behind tested brands such as Crimsafe, Invisi-Gard, SecureView, Xceed and Prowler Proof ForceField. Perforated aluminium sheet, including products such as Amplimesh SupaScreen, is a lighter and often cheaper option that suits coastal patios because aluminium does not rust. Aluminium grille is the budget choice but is a barrier rather than a tested screen unless certified to AS 5039. On the home's biggest opening the temptation to save with a barrier grille is strongest, but it is also where a tested screen matters most.

A grille can be the right call on a smaller, lower-risk slider, but rarely on the main alfresco. On a wide sliding or stacking door the frame and the panel construction carry extra importance, because weight and sag are the enemies. A large panel of fine mesh has to stay flat and square as it slides, so quality screens use heavier aluminium extrusions, from suppliers such as Alspec and Capral, and sometimes a mid-rail to stiffen a tall panel. A tall security slider panel needs that mid-rail to stay flat, since a long unbroken span will flex over time. It is a small detail that keeps a wide door operating smoothly for years.

A panel that sags over time will bind in the track, jam, and stop sliding, which is the most common complaint about cheap sliding screens. The frame is what keeps a big panel running true for years. The track and the rollers are the parts that decide whether a sliding door is still a pleasure to use in ten years. A quality dual-roller or stainless roller system in a sturdy track lets a heavy panel glide, while a thin track and cheap rollers wear, bind and eventually fail under the weight. The track also has to keep the panel captive against lifting, which ties the rolling system to the security of the door. Keeping the track clear of grit is the main maintenance a sliding screen needs, and a good track makes that easy.

A bottom-rolling door carries its weight on the sill track, while some systems are top-hung, and each has its merits for a given opening. The installer should explain which the door uses and why it suits your span. The lock and the hardware complete the picture and tie back to the security rating. A sliding security door locks at the centre with a hook bolt or multi-point mechanism from a maker such as Lockwood, Whitco or Doric, engaging the frame so the panel cannot be slid or levered open.

The mesh, the frame colour and the lock are usually matched across the home and to any window installation and repairs so the openings read as a set. Specifying the patio doors and the windows consistently makes a whole-home set look deliberate rather than piecemeal. Matching the frame colour and the mesh across the patio doors and the rest of the home makes the set look designed rather than assembled. A wide security slider that matches the windows reads as part of the house, not an addition.

Choosing the Right Sliding or Stacking Security Door

Choosing the right door starts with the opening and the glass doors already there. A single glass slider takes a single sliding security door, a wide slider may take a double, and a glass stacker or bifold across a full wall calls for a stacking security screen with matching panels. Measuring the span and counting the panels of the existing glass doors is the first step, since the screen has to share the frame and the track zone. Getting this match right lets the screen slide cleanly alongside the glass rather than fouling it. The mesh choice then follows the view, the exposure and the budget. On a wide patio the near-invisible stainless mesh is often worth the premium, since the whole point of the opening is the outlook, while perforated aluminium suits a coastal home and a tighter budget.

A grille can work on a lower-risk or more utilitarian opening, provided it is a tested grille where security matters. The wider the opening, the more the clarity of the mesh is on show, which is why stainless is popular on a feature alfresco. On a more utilitarian opening, such as a laundry or a side courtyard, a perforated aluminium or a tested grille keeps the cost down without much loss. Reserving the stainless for the feature opening puts the money where it shows.

Egress and daily use matter on a patio door as much as security. The patio is often a main way in and out of the home, so the screen has to slide easily and lock simply for everyday use, and where the opening is an emergency exit the screen must open from inside without a struggle. A door that is secure but heavy and awkward will be left unlocked, which defeats the purpose, so smooth operation is part of the specification, not a luxury. A well-built door is both secure and easy, not one at the expense of the other. The insect layer is a separate decision for the same opening.

Many households want both a security screen and an insect screen on a patio, so the opening ends up with the security door and a sliding flyscreen or a sliding door flyscreen replacement sharing the frame. Deciding whether you want both, and on which panels, before quoting keeps the design and the price clean. The two screens are different products at very different prices, so separating them in the brief helps. Finally, think about the glass doors and any wider work at the same time. If the glass slider or stacker is tired, sticking or being upgraded, it makes sense to recondition or replace it alongside the security screen, coordinating with the glass repairs and window replacement on the opening.

The screen and the glass share the frame and the threshold, so doing both together gives a cleaner result than fitting a screen against a worn slider. Planning the opening as a whole avoids fixing the screen and then disturbing it to sort the glass. Planning the security slider together with the glass door behind it avoids fitting the screen and then disturbing it for the glass. Handling both as one job is tidier and usually cheaper than two separate visits.

Australian Standards, Tracks and Installation

A sliding or stacking security door sits within the same AS 5039 framework as any security screen, with installation just as important as the product. AS 5039.1:2023 sets the performance, AS 5039.3:2023 the test methods, and AS 5039.2:2024 the installation, and a tested door fitted into a weak or out-of-square frame is no longer a tested door. On a wide opening the framing and the threshold take real load, so the fixing has to reach sound material and hold the track true. The standard covers both the door and the way it is anchored, and a big sliding opening tests both. The track and the anti-lift detail are where sliding doors need particular care at installation.

The track must be set level and straight so a heavy panel runs without binding, and the door must be fitted so it cannot be lifted off the track and removed, which is the attack unique to sliding screens. A good installer checks the anti-lift engagement and the roller adjustment before leaving, since a panel that lifts out or sags is both a security and a usability failure. This is the detail that separates a sliding screen that lasts from one that jams within a year. On a wide opening the threshold can also take water, so the track has to drain and the door has to clear it.

A track that ponds or a door set too low will corrode and stick, which is another reason the install detail matters. The glass doors behind the screen carry their own standards, which matter when they are being worked on. The glass sliders and stackers are covered by AS 2047 for windows and doors in buildings and AS 1288 for the glass, so a security screen sits in front of a glazed system with its own compliance, relevant when the glass is replaced under any double glazed window installation and retrofit. The screen does not change the glass requirements; it adds a barrier in front of them. Treating the screen and the glass as one system, each meeting its own standard, keeps the whole opening sound. Egress and safety apply to a patio door as to any opening, with a particular twist on a main thoroughfare.

Because the patio door is often a primary way out of the home, the security screen must open from inside quickly in an emergency, never lock people in, and the centre lock should be simple to release. Where the opening is a designated fire exit, this is a requirement rather than a preference. A screen that keeps intruders out but slows people getting out in a fire has the priorities backwards.

Where the work happens at height or involves heavy panels, the practical safety obligations sit with the installer. Lifting and fitting a large stacking screen, sometimes on an upper balcony, is a job with real manual-handling and height risks, and the installer's duties there fall under SafeWork NSW. For the buyer, confirming the standards each screen meets, the anti-lift detail and the egress arrangement, all in writing, is the most useful compliance step. That way you get a rated, properly fitted door, on paper, rather than one loosely called a sliding security door.

Sliding and Stacking Doors for Rentals, Strata and Insurance

Sliding and stacking security doors are a strong investment on a rental with a patio, since they secure the biggest opening while letting tenants live open in summer. For a landlord, a tested sliding screen on the rear opening helps a property meet its obligation to be reasonably secure at the very point it is most exposed, and it lets tenants ventilate without leaving the glass doors open and unsecured. They pair with the locks and catches covered under door installation and repairs as part of keeping a rental secure.

On a property where the patio is the main living connection, it is among the more worthwhile upgrades. A patio screen also tends to be the feature a tenant notices and values, since it makes the outdoor area usable. For an owner, that is one more reason the spend tends to pay for itself. Whether a sliding security screen is required depends on the building and the tenancy rules rather than being automatic. NSW residential tenancy rules require a reasonable level of security on external doors, and a managing agent usually treats working locks on the glass doors as the baseline rather than a security screen.

A sliding security screen goes beyond that minimum, so it is generally the owner's decision and cost as an improvement, though it can settle a tenant's reasonable concern about an exposed rear opening. Once fitted, keeping the track clear and the rollers running is part of ordinary maintenance. Strata adds the usual common-property considerations, which matter on balconies and shared walls. A patio or balcony opening and its frame may be common property, so fitting a sliding or stacking security screen can need the owners corporation's approval, particularly where it affects the building's appearance or attaches to a common wall. A screen that matches the building's look is usually easier to approve than a one-off. This is a point to confirm with the owners corporation before the work, especially in an apartment with a balcony slider.

Insurance is a fair factor to raise, given the opening involved. Some insurers recognise tested security screens on accessible openings, including the large patio doors, as reducing burglary risk, so it is worth asking whether a tested sliding screen affects the premium or conditions. After a break-in through a patio, a defeated tested screen supports a claim by showing the opening was genuinely secured. The screen is bought to close the biggest opening, with any insurance benefit a welcome extra.

For a property being bought, sold or renovated, the patio screens go in with the wider works. They are fitted alongside any new or reconditioned glass doors and the rest of the opening, including a cavity slider door installation and repairs where the layout calls for it, so the opening is finished once. A buyer planning improvements can budget the screens with the glass doors and brief them together. Doing the screen and the glass at the same time avoids fitting a screen and then disturbing it to sort the slider.

Choosing a Sliding and Stacking Door Installer in NSW

Choosing an installer for sliding and stacking doors calls for particular attention to the span work, since wide openings are where the cheap operators come unstuck. The first thing to establish is that the screens are tested to AS 5039 and that the installer can show the certificate, and that they build for the span with a heavier frame, quality rollers and an anti-lift track. An installer who talks confidently about tracks, rollers, sag and anti-lift on a wide opening knows the job. Be wary of anyone who quotes a wide stacking screen as if it were a standard door.

Experience with wide and multi-panel openings is the next test. A stacking screen across a full alfresco span is a different job from a single patio slider, and an installer who regularly does them will understand the frame, the track and the weight involved, and how the screen pairs with a glass stacker or bifold. The same judgement applies where the work overlaps with the glass doors and the wider front entry door installation and replacement on a whole-home job. Asking how they would handle your particular span and panel count quickly sorts the specialists from the general fitters. It helps to ask to see a stacking screen they have fitted, or photos of one, since a wide multi-panel job is where the difference in skill shows.

A fitter who only does single sliders may not be set up for a full alfresco span. A clear, written quote is the third sign of a sound operator. It should state the door type and panel count, the span, the mesh and frame, the track and roller system, the centre lock and anti-lift, the standard met, and what the price includes.

Where the job also touches the glass doors, that work should be itemised separately so you can see the screen cost cleanly against any glass work. A quote that just says "sliding security door" without the span, the track and the lock detail is not one you can rely on for a wide opening. Insurance, warranty and a willingness to return finish the checklist, and on a moving door the warranty on the operating parts matters. The installer should carry public liability insurance, offer a written warranty on the mesh, the frame and the rollers and track, and be prepared to return if a panel sags or a roller fails. Because a sliding door is a mechanism that runs thousands of times, the warranty on the track and rollers is a real test of how well it is built. A supplier confident in the moving parts is one who built them properly.

Finally, compare operators on the span engineering rather than the headline price. The cheapest quote on a wide opening is often a light frame and cheap rollers that will sag and jam within a couple of years, which is not obvious until it happens. Posting the job for a few quotes through The Quote Yard lets you line up the frame, the track, the lock and the warranty side by side. On a wide sliding opening, a good and a poor screen differ in how they run over the years, so the build is what to compare.

What Drives Sliding and Stacking Door Pricing

The width of the opening and the number of panels are the biggest drivers of price. A single sliding door is the baseline, a double slider more for the extra panel and the wider frame, and a multi-panel stacking screen across a full alfresco span more again for the panels, the longer track and the heavier framing. For a standard patio a single sliding security door commonly runs seven hundred to fifteen hundred dollars, a double around twelve hundred to twenty-two hundred, and a stacking screen from roughly eighteen hundred up past three thousand five hundred. The span sets the range before anything else is chosen. The mesh and frame then move the figure within that range. A tested marine-grade stainless mesh costs more than perforated aluminium, which costs more than a basic grille, and a wide panel needs a heavier frame and sometimes a mid-rail to stay flat, all of which adds.

On a wide opening the frame is a larger share of the cost than on a small door, since it is doing more structural work. The stainless upgrade on a big opening is a meaningful line, but it is also where the near-invisible view is most valued. The frame on a wide door is also more visible than on a small one, so the colour and the slimness of the sections affect the look as well as the strength. A heavier frame need not look bulky if the sections are well designed.

The track, the rollers and the lock are a real and worthwhile part of the cost on a moving door. A quality dual-roller or stainless roller system and a sturdy track cost more than thin budget hardware, but they are what let a heavy panel slide for years rather than sagging and jamming, so they are not the place to save. An anti-lift centre lock or multi-point mechanism adds to a single latch but is central to both security and smooth use. On a sliding door, the hardware is much of what you are paying for. Location, access and the insect layer then adjust the base.

A coastal NSW home needs marine-grade stainless or a quality powder-coat and stainless rollers that handle salt, which lifts the cost, and an upper-balcony or hard-to-reach opening adds labour. Adding a sliding insect screen or an outdoor privacy screens panel to the same opening is a separate line, modest next to the security door but worth pricing in. A whole-opening package, with the security screen, the insect screen and the track work together, is usually quoted as one job. Finally, the supply-and-install model and bundling shape the price. A measured, custom-made and professionally installed sliding screen costs more than an off-the-shelf one, but it is made to the exact span, fitted true with the right track, and backed by a warranty on the moving parts.

For a wider project the patio screens sit alongside any glass door work and a roller shutter installation on other openings. Pricing the opening as a whole, rather than the screen alone, very often sharpens every line on the final quote. Doing the patio slider alongside the other openings lets the installer set up once and quote the whole job together. A combined visit almost always beats pricing a wide door on its own.

What to Look Out For

The first thing to watch on a sliding screen is a light frame that will sag. A wide panel of fine mesh in a thin frame, with no mid-rail where the height calls for one, will bow over time, bind in the track and eventually stop sliding, which is the most common failure of cheap sliding screens. Ask about the frame section and whether a mid-rail is included on a tall panel, since a heavier frame is what keeps a big door running true. A screen that slides beautifully on day one can drop within a year if the frame was cut to a price. The sag is gradual, so it often appears just after a short warranty expires, which is no accident on the cheapest doors.

A heavier frame and a proper warranty on the moving parts are the defence against that. The second thing is the track and roller quality, which is easy to overlook at purchase. Cheap rollers and a thin track wear quickly under the weight of a large panel, leading to a door that drags, jumps the track or jams, and replacing them later is fiddly and costly. Ask what roller and track system the door uses, since a quality dual-roller or stainless system is what carries the weight for years.

The rollers are small parts doing a big job, and they are not the place to economise. The third, and the one most often forgotten, is the anti-lift detail. A sliding door that can be lifted off its track can be removed entirely, bypassing the lock, so a tested door must be built and fitted so it cannot be jemmied up and out. Ask directly how the door resists lifting, because a strong mesh and a good lock count for nothing if the whole panel can be lifted away. On a sliding screen, anti-lift is as important as the lock itself. Corrosion is the slow failure on the coast, and it reaches the moving parts as well as the mesh.

Near salt air a cheaper mesh, a thin powder-coat or non-stainless rollers will corrode, leaving a door that stains, stiffens and seizes, where marine-grade stainless mesh, a quality coating and stainless rollers would have lasted. On a coastal patio the rollers and the track deserve the same attention to grade as the mesh. A sliding door that seizes from corroded rollers is as useless as one with a rusted screen.

Finally, be wary of high-pressure sales and a quote that glosses over the span detail. A wide opening is a considered purchase, and a quote that does not mention the frame, the track or the anti-lift, or that is only valid if you sign today, is a warning. A reputable installer measures the span, specifies the frame and track, and quotes in writing. The consumer protections under the Australian Consumer Law, overseen by the ACCC, apply to sliding and stacking doors as to any product and service.

How to Get Useful Quotes

A useful quote starts with the span and the glass doors already there. Note the width of the opening, the number of panels in the existing glass slider or stacker, and whether you want a single, double or stacking security screen, so each installer prices the same job. A photo of the opening, with a rough measurement, helps an installer see the span and how the screen will share the frame with the glass doors. Telling the installer the width of the opening, how it is used, and what glass door sits behind it lets them quote the right frame and track. The fuller that picture, the more accurate and comparable the quotes.

The fuller the description of the opening, the more closely the quotes will match. It also helps to note which way the doors currently open and which side you want the screen to park, since that affects the design. A quick sketch of the opening saves a great deal of back and forth. Saying what you want from the screen sharpens the quotes further. Whether the priority is a near-invisible view across the opening, coastal durability, an insect screen as well, or the lowest price changes the mesh and the specification, so spelling it out means the quote matches the goal.

If the home is coastal, say so, since it points to marine-grade mesh and stainless rollers that handle salt. A quote built on the wrong assumptions is not really a quote for your opening. Asking each installer the same questions lets you compare fairly, and on a sliding door the questions are specific. Confirm the door type and panel count, the frame section and any mid-rail, the track and roller system, the anti-lift and centre lock, the mesh and standard, the warranty, and what the price includes, then lay the answers side by side. A quote that names AS 5039, a heavy frame, a quality track and an anti-lift lock is not competing with one that lists only "sliding security door" at a similar number. On a wide opening, it is the build detail that separates the quotes.

It is worth confirming the practical details too. Ask about lead time, since custom sliding and stacking screens are made to order, whether old screens are removed and disposed of, and how the track is fitted to run true. Where the job also touches the glass doors, ask for that to be itemised so you can read the screen cost cleanly against any sliding door installation and repairs wrapped into the same visit. Settling what is included up front avoids the extras that quietly lift a low quote later.

Posting one clear job on The Quote Yard puts your sliding or stacking screen project in front of installers across NSW at once, so the quotes come to you. A single, well-described job, with the span, the panel count, the goals and the location set out, is the most efficient way to gather comparable prices. It also lets you choose on the frame, the track and the lock rather than on whoever called back first. For the biggest and most-used opening in the home, a few minutes of detail upfront are well spent.

Standards, Warranty and Consumer Rights

Sliding and stacking security doors are sold against a clear standard, and knowing it is a buyer's best protection. A genuine sliding security door meets AS 5039.1:2023, is tested to AS 5039.3:2023 and is installed to AS 5039.2:2024, while the glass doors behind it carry AS 2047 and AS 1288. Asking a supplier to confirm in writing the standard the screen meets, and the anti-lift and track detail, turns a vague claim into something you can hold them to. On the home's biggest opening, that written confirmation is worth insisting on.

Treat the anti-lift and track specification as part of that written confirmation, not just the mesh and the lock. On a sliding door those are the parts most often left vague and most likely to fail. Warranty is where the quality of a supplier shows, and on a moving door the warranty on the running gear is the real test. A good sliding screen carries separate warranties on the mesh, the frame and powder-coat, and the rollers and track, often ten to fifteen years on the mesh and shorter on the moving parts, plus a workmanship warranty on the installation. Keeping the quote, the certification and the warranty together means you can call on it if a panel sags, a roller fails or a coastal mesh stains.

A supplier who warrants the rollers and track separately is one confident the door will keep running. Your consumer rights apply on top of any warranty. Sliding and stacking doors are goods and services, so they must be of acceptable quality and fit for the purpose described, protections backed nationally by the Australian Consumer Law and administered in this state through NSW Fair Trading.

If a door sold as a tested security screen turns out to be a barrier, or sags and jams because it was under-built for the span, those guarantees are what you rely on. They are a floor under every purchase, not an optional extra. Where something goes wrong and cannot be resolved with the installer, there is a clear path. Consumer disputes in NSW can be taken to the NSW Civil and Administrative Tribunal, and the records you kept, the quote, the certification and the warranty, are what make that straightforward. Most reputable installers resolve a genuine problem long before it reaches that point, particularly a sagging panel under warranty, which is one more reason to choose carefully at the start. Keeping the paperwork is worth the effort, both for compliance and if the rating is ever questioned.

Seen as a whole, a sliding or stacking security door is the upgrade that closes the biggest opening in a NSW home while keeping it open to the air. It works alongside the broader security doors and screens options nationally and the wider security doors and screens across the home rather than replacing the locks, the windows and the lighting around it. Choose a tested screen, built for the span with a heavy frame, quality track and rollers and an anti-lift centre lock, suited to your coast and fitted true. Do that, and a sliding or stacking screen becomes the door that lets a New South Wales home live open to its patio while staying secure for years.

Sliding and Stacking Security Doors Across NSW

We connect you with screen installers across NSW who can measure your patio and alfresco openings, supply single, double or stacking security doors tested to AS 5039, fit quality tracks, rollers and an anti-lift centre lock, and back the work with a warranty, across Sydney, Newcastle, Wollongong, the Central Coast and regional NSW.

▶ Sydney Inner City 18 areas
Sydney CBD Surry Hills Darlinghurst Potts Point Paddington Redfern Newtown Glebe Balmain Pyrmont Ultimo Chippendale Alexandria Waterloo Zetland Erskineville Rozelle Leichhardt
▶ Greater Sydney 25 areas

Western Sydney

Parramatta Penrith Blacktown Mount Druitt Seven Hills Wetherill Park Auburn Fairfield Cabramatta St Marys

South Western Sydney

Liverpool Campbelltown Bankstown Revesby

Northern Sydney

Hornsby Chatswood Epping Macquarie Park Eastwood

The Hills District

Castle Hill Baulkham Hills

Inner West

Ryde Strathfield Burwood

St George

Hurstville Kogarah
▶ Sydney Coastal 23 areas

Northern Beaches

Manly Dee Why Curl Curl Freshwater Brookvale Collaroy Narrabeen Mona Vale Newport Avalon Palm Beach

Eastern Suburbs

Bondi Tamarama Bronte Coogee Maroubra Randwick

Harbour Suburbs

Double Bay Rose Bay Watsons Bay

Sutherland Shire

Cronulla Miranda Sutherland
▶ Hunter & Central Coast 19 areas

Central Coast

Gosford Terrigal Wyong The Entrance Tuggerah Erina Woy Woy

Hunter Valley

Newcastle Maitland Lake Macquarie Charlestown Belmont Raymond Terrace Cessnock Singleton Muswellbrook

Port Stephens

Nelson Bay Salamander Bay Shoal Bay
▶ Illawarra & South Coast 18 areas

Illawarra

Wollongong Shellharbour Kiama Dapto Corrimal Thirroul Gerringong

Shoalhaven

Nowra Berry Ulladulla Huskisson Vincentia

Sapphire Coast

Batemans Bay Moruya Narooma Bega Merimbula Eden
▶ North Coast 19 areas

Mid North Coast

Port Macquarie Forster Taree Kempsey Laurieton

Coffs Coast

Coffs Harbour Bellingen Sawtell Grafton Yamba

Northern Rivers

Byron Bay Tweed Heads Ballina Lismore Bangalow Lennox Head Brunswick Heads Mullumbimby
▶ Blue Mountains & Highlands 17 areas

Blue Mountains

Katoomba Leura Wentworth Falls Blackheath Springwood Hazelbrook Glenbrook Faulconbridge Lawson Blaxland Lithgow

Southern Highlands

Bowral Moss Vale Mittagong Bundanoon Robertson Berrima
▶ Regional NSW 21 areas

Central West

Orange Bathurst Dubbo Mudgee Parkes Forbes Cowra Young

Riverina

Wagga Wagga Albury Griffith Leeton Goulburn Queanbeyan

New England

Tamworth Armidale Inverell Moree Narrabri

Far West

Broken Hill Cobar

Specialist Security and Door Services - NSW

For Tradies - NSW

Are you a tradie? Browse current job leads on the NSW tradie job leads board, with relevant work including glazier jobs, carpenter jobs and handyman jobs, or see the full range of tradie job leads posted to The Quote Yard platform.

Sliding and Stacking Security Doors FAQs - NSW 2026

How much does a sliding or stacking security door cost in NSW in 2026?
It depends mostly on the width of the opening, the number of panels, and the mesh and hardware, but a supplied and installed sliding security door typically runs from around $700 to $1,500 for a single panel. A double sliding security door across a wider opening is commonly $1,200 to $2,200, and a multi-panel stacking security screen matching a glass stacker across a full alfresco span from roughly $1,800 up past $3,500, since it has more panels, a longer track and a heavier frame. A sliding security flyscreen for the same opening is a separate and cheaper item, generally $250 to $600, and a stainless mesh upgrade over perforated aluminium adds a few hundred dollars. A whole-opening package combining the security screen, an insect screen and the track work commonly lands between $2,500 and $8,000 depending on the span and the mesh. The main drivers are the span and panel count, the mesh and frame, the track and rollers, and the centre lock and anti-lift. Because quotes vary in what they include, confirm the span and panel count, the frame and track, the mesh and the certification, and what is covered, and get it in writing so you can compare like with like.
What is the difference between a sliding and a stacking security door?
The difference is in how many panels move and how they open, which follows the glass doors behind them. A sliding security door has one or two moving panels that slide past a fixed panel in a track, suited to a standard patio slider, with a single slider having one moving panel and a double having two that meet in the centre. A stacking security door, by contrast, has three or more panels that slide and gather, or stack, to one side, so they clear most of a wide opening, and it is designed to match a glass stacker door across a full alfresco span. The stacking type lets a whole wall of the home open to the outdoors while still being able to be secured behind the screens, which is why it has become common on newer homes with large glass stackers or bifolds. Because a stacking screen has more panels, a longer track and more weight, it is more involved to make and fit, and it costs more than a single or double slider. When choosing, the existing glass doors usually dictate the type: a single or double glass slider takes a sliding security door, while a multi-panel glass stacker or bifold calls for a stacking security screen. Matching the screen to the glass doors is what makes the whole opening work smoothly.
Can a sliding security door be lifted off its track?
A poorly made or poorly fitted one can be, which is exactly why an anti-lift device and a properly designed track are essential on a sliding security door. Because the door runs on rollers in a track rather than swinging on hinges, a cheap sliding screen can sometimes be lifted up and out of its track, removing the whole panel and bypassing the lock entirely, which defeats the purpose of a security screen. A genuine tested sliding security door is built and fitted so it cannot be jemmied up and out: the track and the door are designed to keep the panel captive, with an anti-lift feature that stops it being raised far enough to come free. This lift attack is the one most often overlooked on a sliding screen, since buyers focus on the mesh and the lock and forget that the whole panel could be removed, so it is worth asking the installer directly how the door resists lifting. A strong mesh and a good centre lock count for nothing if the panel can simply be lifted away, which is why the anti-lift detail is as important as the lock itself. A good installer confirms the anti-lift engagement when fitting the door rather than leaving it to chance. When comparing quotes for a sliding security door, the anti-lift and the track quality should be on the list alongside the mesh and the lock.
Why do cheap sliding screens sag and jam, and how is that avoided?
Cheap sliding screens sag and jam because a wide panel of fine mesh in a thin, light frame bows over time, and cheap rollers and a thin track wear under the weight, so the door drops, binds and eventually stops sliding. The two causes are the frame and the running gear. A large panel needs a heavier aluminium frame, and on a tall panel sometimes a mid-rail to stiffen it, so it stays flat and square as it slides; a frame cut to a price will bow within a year or two. The track and rollers carry the weight every time the door moves, so a quality dual-roller or stainless roller system in a sturdy track is what lets a heavy panel glide for years, while thin budget hardware wears, drags and jumps the track. Avoiding the problem is mostly a matter of specification: choose a screen with an adequately heavy frame for the span, a mid-rail where the height calls for it, and a quality track and roller system, rather than the cheapest option. The main maintenance a sliding screen needs is keeping the track clear of grit and leaves, which a good track makes easy, and an occasional check of the roller adjustment. When comparing quotes, ask about the frame section, whether a mid-rail is included on a tall panel, and the roller and track system, since those determine whether the door still slides well in ten years. A well-built sliding screen is a pleasure to use for the life of the home.
What mesh should I choose for a wide patio opening?
For a wide patio the choice usually comes down to woven marine-grade stainless steel mesh or perforated aluminium, with the view and the coastal exposure deciding between them. Woven 316 stainless mesh gives a near-invisible view across the opening, which matters most on a wide patio where the whole point is the outlook, along with high airflow and strong cutting resistance, and it is the technology behind the better tested brands. It sits at the top of the price range, but on a feature alfresco the clear view is often worth the premium. Perforated aluminium is lighter and usually a little cheaper, suits coastal homes because aluminium does not rust, and gives a slightly more screened view that some people prefer. An aluminium grille is the budget option but is a barrier rather than a tested security screen unless that specific grille is certified to AS 5039, and on a large patio opening, which is a key security point, a tested mesh is usually the wiser choice. On the coast, both stainless and aluminium handle salt air well provided the grade and the powder-coat are good, and the rollers and track should be stainless or corrosion-resistant too. The wider the opening, the more the clarity of the mesh is on show, which is why stainless is popular on a large alfresco where the view is the feature. Whichever you choose, the mesh on the home's biggest opening is worth specifying as a tested security product rather than a barrier.
Can I have both a security screen and an insect screen on a patio door?
Yes, and many NSW homes do, with the security screen and a sliding insect screen sharing the same opening. The security screen holds the opening against intruders and is tested to AS 5039, while a separate sliding flyscreen keeps insects out when the glass doors are open, and the two run as different panels in the frame. They are different products at very different prices, the security screen being the substantial item and the insect screen a modest add-on, so it helps to decide whether you want both, and on which panels, before getting quotes. On a wide opening the insect screen is often a single sliding panel that covers the part of the opening most used, rather than the whole span, which keeps the cost down. The two screens are designed to coexist in the frame alongside the glass doors, so the opening can have the glass open for air, the insect screen across to keep bugs out, and the security screen closed and locked at night. A good installer will set the opening up so all three layers, the glass, the insect screen and the security screen, work together without fouling each other. When briefing the job, say whether you want an insect screen as well so it is designed in from the start rather than added awkwardly later. Folding the insect screen into the same job is cheaper and tidier than retrofitting one afterward.
Do sliding security doors work for apartments and balconies?
Yes, sliding security doors are common on apartment and balcony openings, but strata approval is usually needed first. A balcony slider is often the main opening of an apartment and a point worth securing, and a sliding security screen lets the balcony door stand open for air while the opening stays secured, which is valuable in a unit. The complication is that the balcony opening and its frame may be common property in a strata building, so fitting a security screen generally requires the owners corporation's approval, particularly where it affects the building's external appearance or attaches to a common wall. A screen that matches the building's existing look and colour is usually easier to get approved than a one-off design, and many owners corporations have a preferred style for consistency across the block. Beyond the strata approval, the same considerations apply as for any sliding security door: a tested screen to AS 5039, a quality track and rollers, an anti-lift detail, and egress so the screen opens from inside in an emergency, which matters especially on an upper floor. Where the screen is on an upper balcony, the installer also has manual-handling and height-safety obligations during the fit. The practical path for an apartment is to confirm what the owners corporation allows, choose a screen that suits the building, and use an installer experienced with strata and balcony work. Done that way, a sliding security screen makes an apartment balcony both usable and secure.
How long do sliding and stacking security doors last, and what warranty should they have?
A quality sliding or stacking security door should last well over a decade, and the better products carry mesh warranties of around ten to fifteen years, with shorter terms on the moving parts, the rollers and the track, plus a workmanship warranty on the installation. Because a sliding door is a mechanism that runs thousands of times, the warranty on the rollers and track is a real test of how well it is built, and a supplier who warrants those parts separately is one confident the door will keep running. Longevity depends heavily on the build and the location: a heavy frame with a mid-rail where needed, a quality track and stainless rollers, and a marine-grade mesh will outlast a light frame with cheap hardware, especially near the coast where salt air reaches the moving parts as well as the mesh. The main maintenance a sliding screen needs is simple but important: keep the track clear of grit and leaves so the rollers run smoothly, give the rollers an occasional check and adjustment, and rinse the mesh and track on a coastal home to keep salt from building up. It is worth keeping the quote, the certification and the warranty paperwork together, so that if a panel sags, a roller fails or a coastal mesh stains sooner than it should, you can call on the warranty easily. A door that is well built for the span, fitted true with a quality track, and kept clean is one of the longer-lasting upgrades a home can have, and it stays a pleasure to use rather than a daily frustration.
Can a sliding security door be fitted to my existing patio slider?
In most cases yes, since a sliding security door runs in its own track set in front of or alongside the existing glass slider, rather than replacing it. The main things the installer checks at the measure are that the opening is reasonably square and that there is enough depth in the reveal to take the security door's track without fouling the glass door behind it. On an older or out-of-square opening, or where the existing slider is worn, a little preparation may be needed so the new screen runs true, but a retrofit is the normal way these are fitted. The installer measures the existing opening and the glass door, then makes the security screen to suit, so it is worth having the size and the type of your current slider to hand when getting quotes.
Do sliding and stacking security doors need much maintenance?
Very little, and most of it comes down to keeping the bottom track clean, which is the single biggest factor in how well a sliding door runs over the years. Grit, leaves and sand build up in the track and grind at the rollers, so a regular sweep or vacuum of the track, an occasional wipe of the frame, and a light lubricate of the rollers and lock now and then keep it sliding smoothly. On a coastal home a periodic fresh-water rinse of the mesh, frame and track helps keep salt from building up and corroding the moving parts and fittings. A quality track and rollers are built to carry the weight of a wide door, so with this light care a good sliding or stacking security door runs cleanly for many years, while a neglected, grit-filled track is the usual cause of early wear.

Need a Sliding or Stacking Security Door in NSW?

Post your job and connect with screen installers across NSW who can measure your patio and alfresco openings, supply single, double or stacking security doors tested to AS 5039, fit quality tracks, rollers and an anti-lift centre lock, and back the work with a warranty, across Sydney, Newcastle, Wollongong, the Central Coast and the regions.

Get Sliding Screen Quotes

Reviewed by The Quote Yard Editorial Team

Published 20 June 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All NSW tradies are required to hold appropriate licences. Verify at NSW Fair Trading.
Prices are estimates based on typical NSW market rates in 2026 and vary by the width of the opening, the number of panels, the mesh and frame, the track and rollers, the lock, and whether the door is tested to the Australian Standard. A double slider, a multi-panel stacking screen or a wide alfresco span costs more than a single sliding door, and a coastal site changes the mesh, the powder-coat and the rollers needed. Always confirm the span and panel count, the mesh and the certification, the track and anti-lift detail, and what the quote includes, and get it in writing.
Need work done? Get free quotes. Post a Job – It's Free