Need Solar Panels Cleaned in the ACT?

Tell us your suburb, the number of panels, how many storeys the house has, the roof material and the year it was built, and local cleaners can quote.

Get Free Solar Panel Cleaning Quotes

Solar Panel Cleaning Prices Across the ACT

Panel clean, single storey homePriced on quote
Panel clean, two storey or steep roofPriced on quote
Bird proofing mesh around the arrayPriced on quote
Solar system health check$150 - $300
Roof clean, single storey tile$600 - $1,100
Roof clean, steep two storey$1,200 - $2,400
Gutter clean, single storey$150 - $280
Gutter clean, two storey$250 - $450
Gutters added to a roof clean$200 - $600
Window high-access charge$50 - $150

These are 2027 estimates for typical Canberra homes, and the panel clean itself is priced on quote. The related figures come from ACT solar, roof, gutter and window guides, so confirm every price in writing.

Solar Panel Cleaning Services ACT - Get Local Quotes

Solar panel cleaning lifts dust, pollen, droppings and grime from the glass of a rooftop solar array, the full set of panels, so more light reaches the cells underneath. In the Australian Capital Territory several sets of rules apply to the job, and householders rarely see them listed together. WorkSafe ACT expects anyone on your roof to control the risk of a fall, starting with work from the ground and treating ladders as the last choice. Evoenergy tells owners to treat every solar system as live, never to walk on the panels and never to pour cold water on hot glass in sunshine. Icon Water's permanent conservation measures stop windows being washed with a standard garden hose, which shapes how a cleaner plans the rinse. Only electricians with a distributed energy resources (DER) endorsement, an added approval on their Access Canberra licence, may work on the wiring, inverter or isolator switches. The clean itself is priced on quote across the ACT, while related roof jobs have 2027 estimates drawn from published Canberra guides. Older homes need extra care, because ACT Health says any home built before 1990 may contain asbestos, and nobody should use a pressure washer on fibro roofing. Roofs that feed a rainwater tank need the downpipe diverted while the glass is rinsed. The guide also covers frosty mornings, mynas under the array, hail damage and disputes taken to ACAT, the territory's civil tribunal. Post your job on The Quote Yard and local panel cleaners across the ACT can quote on it.

Solar Panel Cleaning Around the Capital Territory

Panel cleaners work across Belconnen, Gungahlin, the inner north and south, Woden, Weston Creek, Molonglo Valley, Tuggeranong and the rural villages. Prices depend on roof height, pitch, the age of the roof, the grime on the glass and travel.

Get Free Quotes

Solar Panel Cleaning Costs at a Glance, ACT 2027

Job Price Range How It Is Charged What Moves the Price Who Can Do It
Panel clean, single storey home Priced on quote Per panel or per call out Panel count and grime Panel cleaner
Panel clean, two storey or steep roof Priced on quote Per visit Rails, anchors or scaffold Panel cleaner
Bird proofing mesh Priced on quote Per array Array shape and roof type Panel cleaner or installer
Solar system health check $150 - $300 Per visit System size and findings Solar installer or electrician
Roof clean, single storey tile $600 - $1,100 Per roof Area, pitch and growth Roof cleaner
Roof clean, steep two storey $1,200 - $2,400 Per roof Height and pitch Roof cleaner
Gutter clean, single storey $150 - $280 Per visit Leaves and downpipe count Gutter cleaner
Gutter clean, two storey $250 - $450 Per visit Height and access Gutter cleaner
Gutters added to a roof clean $200 - $600 Add-on Length and debris Roof or gutter cleaner
Window high-access charge $50 - $150 Add-on Upper or roof glass Window cleaner
Wiring, isolator or inverter fault Separate quote Per visit Size of the system Licensed electrician

What Adds to a Panel Cleaning Visit

What is involved
A second storey, or a roof steep enough to need edge rails or a restraint line, a harness rope that stops a worker reaching the edge.
A pre-1990 roof that needs an asbestos check before anyone walks on it.
Travel to rural properties or villages such as Hall, Tharwa and Uriarra.
Gutters, windows, roof cleaning and bird mesh added to the same visit.
Ask every cleaner to list the panel count, access method, water, each extra and any travel fee on separate lines.

Washing Rooftop Arrays Across the Capital Territory

A rooftop solar array slowly collects a film of dust, pollen, leaf litter and bird droppings that cuts the light reaching the cells. Rain on a pitched roof rinses some of that film away, but it rarely clears droppings or sticky pollen that has baked onto the glass. A professional clean uses soft brushes, purified water and safe roof access to lift that film without scratching the glass or loosening fittings. Cleaners work across the whole territory, from the inner suburbs to Gungahlin, Molonglo Valley, Tuggeranong and the rural villages.

Several ACT bodies shape how a panel clean should happen, even though none of them licenses the person doing the washing. WorkSafe ACT sets out how anyone working on your roof must control the risk of a fall. Evoenergy, the company that runs the electricity network in the territory, tells owners to treat every solar system as live, meaning able to give an electric shock. Icon Water's Permanent Water Conservation Measures limit how a garden hose can be used on windows and other outside parts of a house. Access Canberra licenses the electricians who may work on the wiring, while the ACT Civil and Administrative Tribunal (ACAT) hears disputes when a job goes wrong.

Older homes need extra care, because ACT Health says any home built in the territory before 1990 may contain asbestos. That matters when a cleaner plans to walk on, or rinse, a fibro roof, made of asbestos cement sheeting, sitting underneath the panels. Each rule is set out in plain terms on this page, next to the related roof jobs that have published Canberra prices. Where no reliable figure exists, the item is marked priced on quote rather than filled with a guess. You can then compare quotes knowing what a careful, well planned clean should include from start to finish. Most sections end with a short table or checklist you can use on the day of the clean.

What Canberra Households Pay Around a Panel Clean in 2027

No current Canberra price guide publishes a standard figure for washing a home solar array, so this page does not invent one. The number of panels, the roof pitch (how steep it is), the number of storeys and the type of grime all change the time a crew needs. A low single storey roof with twenty panels might be reached by pole from the ground, while a steep two storey roof may need rails or a harness. Each of those setups costs the business something different, which is why quotes can vary widely between homes on the same street. For that reason the panel clean itself is shown as priced on quote throughout this guide.

Several related jobs do have published ACT estimates, and they help you judge a panel quote in context. Solar installers in the territory list a system health check at about $150 to $300 as a 2027 estimate. A roof clean on a modest single storey concrete tile roof at low pitch runs about $600 to $1,100. A steep two storey roof of similar area sits nearer $1,200 to $2,400, and adding gutters to a roof clean adds about $200 to $600. Those roof figures include removing moss and lichen, so they show an upper limit rather than a price for washing glass alone.

A standalone gutter clean is listed at about $150 to $280 for a single storey house and $250 to $450 for two storeys. Canberra window cleaners add a high access charge of about $50 to $150 for upper or roof glass. Treat all of these as 2027 estimates and ask for each item in writing before you agree. If a business bundles the panels into a roof or gutter price, ask how much of the total relates to the array itself.

Item 2027 ACT Estimate Billing Basis Price Drivers
Panel clean, single storey home Priced on quote Per panel or per call out Panel count and grime
Panel clean, two storey or steep roof Priced on quote Per visit Rails, anchors or scaffold
Mesh to keep birds out from under panels Priced on quote Per job Array shape and roof type
Solar system health check $150 - $300 Per visit System size and findings
Roof clean, single storey tile at low pitch $600 - $1,100 Per roof Roof area and growth
Roof clean, steep two storey $1,200 - $2,400 Per roof Pitch and height
Gutter clean, single storey house $150 - $280 Per visit Leaves and downpipe count
Gutter clean, two storey house $250 - $450 Per visit Height and access
Gutters added to a roof clean $200 - $600 Add-on Length and debris
Window high-access charge $50 - $150 Add-on Upper or roof glass

Combining the Array With a Roof, Gutter or Glass Visit

Much of the cost of a panel clean sits in getting a crew and its gear safely onto the roof. Once ladders, anchors or rails are in place, clearing gutters or skylights from the same position often takes little extra setup. That is why many households book the array alongside a roof clean or gutter visit on the same day. Ask each business to quote the panels both as a standalone job and as an add-on, so you can see the difference. A business that only offers the bundled price may be fine, but you cannot compare it fairly with a standalone price.

Order matters when several jobs share one visit. A roof clean that loosens moss or lichen should finish before the panels are washed, otherwise runoff can streak freshly cleaned glass. Gutters usually come after the roof and panel work, because debris washed down the slope lands in them. Glass at ground level comes last, since drips from the roof and panels can mark it, and a window cleaning business can finish the job. Agree the order in writing so each crew knows when it is expected on site. If two businesses share the visit, ask which one is responsible for the roof access gear.

Bundling only helps when one crew is properly equipped for every task in the bundle. A gutter business may not carry purified water gear, and a panel specialist may not clear blocked downpipes. Ask each business which parts of the visit its own staff will do and which go to a subcontractor. If a subcontractor is used, check that their insurance also covers work on your roof.

Lines to Check on a Combined Roof Visit

$200 to $600, the 2027 estimate for adding gutters to a roof clean on a Canberra home
Quote line
Look for
Number of panels
Every panel included, and any left out
Access gear
Rails, anchors, ladder or a pole from the yard
Order of work
Roof first, then panels, gutters and glass
Water
Purified or filtered, and how it is applied

Compare per panel rates only after confirming each quote counts the same panels.

Ask whether the access gear is charged once or separately for each job it supports.

Find out whether you pay anything if the crew turns up and judges the roof unsafe to work on that day.

WorkSafe ACT's Five Levels of Fall Control on a Home Roof

WorkSafe ACT lists five levels of control for falls, and the first aim is always to remove the hazard entirely. Level one is working on the ground or from a solid construction, which is why many cleaners work from the yard with water fed poles, long poles that pump water to a brush. Level two is passive fall prevention, meaning fixed barriers such as scaffolds, guardrails and safety mesh, with guardrails at least one metre high. Level three covers total restraint harnesses, which keep a worker from reaching the edge, and level four covers catch platforms and fall arrest gear that stops a fall once it starts. Ladders and administrative controls, such as safe work rules and training, sit at level five, to be used only when no better option is available.

In WorkSafe ACT guidance, work where a person could fall two metres or more counts as high risk construction work. At that height the business must provide physical fall prevention where reasonably practicable and prepare a safe work method statement. That document, often shortened to SWMS, sets out what could go wrong on the job and how each risk will be managed. Ask a cleaner who will work on a two storey roof whether they have prepared one for your job. If no SWMS exists, ask how the crew will manage the roof edge before you agree to the booking.

Single storey roofs are not automatically safe, and WorkSafe ACT has warned that low height falls still carry high risk. Its alert notes that falls from two metres or less can still cause serious injury. It also explains that fall arrest gear often does not work on low house roofs, because a falling worker may reach the ground before it takes hold. Restraint systems that stop a worker reaching the edge are the better choice, provided workers are trained to fit and use them. Safe Work Australia adds that a roof cannot be relied on to carry a person and equipment without a thorough inspection first.

Situation WorkSafe ACT Guidance Common Control Question to Ask
Low single storey roof Low falls still carry high risk Pole from the yard or restraint harness Will anyone stand on the roof?
Fall of two metres or more High risk construction work, SWMS needed Guardrails, scaffold or restraint line Can I see the SWMS for my job?
Steep or frosty pitch Fixed barriers preferred Edge rails with a restraint line Who fits the anchor points?
Quick check from a ladder Ladders are the last option Sound ladder, set up properly Is a ladder the only access planned?
Brittle sheeting or skylights Inspect the roof before use Walkboards or no roof walking Has the roof been checked first?

Why Evoenergy Says to Treat Every Array as Live

Evoenergy, which runs the electricity network across the ACT, tells owners to always treat a solar system as live. Its solar safety advice says never to walk or lean on the surface of the panels. It also says never to open or service a system unless you are a fully qualified licensed electrician. Safe Work Australia's rooftop solar guide adds that panels generate electricity even with small amounts of sun. Turning off the main switch therefore does not make the cables on the roof safe to touch. Anyone on the roof should work as though every plug and lead carries a dangerous voltage.

A cleaner's job is the glass and the frame, not the plugs, cables or junction boxes, the small sealed boxes where cables leave the back of each panel. If cabling has come loose, sagged onto the roof or rubbed through its cover, the clean should stop and a local electrician should be called. An Access Canberra electrical note warned that array cables must not lie on roofs unless they sit inside an enclosure or conduit, a protective tube or casing. Cables that rub against roofing can wear through their insulation and create a shock or fire risk.

Evoenergy also asks owners to check, from time to time, the display on the inverter, the box that turns panel power into household power, or the online generation data. A sudden drop that a clean does not fix points to a fault rather than dirt on the glass. In that case an electrical safety inspection should come before anyone returns to the roof. A screenshot of daily output taken before and after the clean gives the electrician something useful to compare. Keep those records with your installation paperwork so they are easy to find later.

Live System Checks Before a Clean

Item
What to check
Panel surface
Nobody walks or leans on it
Cables under the array
Clipped up, not resting on the roof
Inverter display
Normal reading noted before work
Damaged glass
Clean stops and an electrician is called

Evoenergy lists 13 10 93 as its number for electricity emergencies in the ACT.

Your original installer can advise on the maintenance needs of your particular system.

Panels keep producing voltage whenever light falls on them, so nobody but an electrician should handle plugs or cables.

Garden Hoses, Icon Water's Conservation Rules and Rinse Water

Icon Water's Permanent Water Conservation Measures apply to Canberra homes all year round. They allow windows and other external parts of buildings to be washed at any time with a bucket and mop, brush or squeegee. A high pressure, low volume cleaner is also allowed for that work. The measures say you cannot wash windows with a standard garden hose, even one fitted with a trigger nozzle. Any cleaner planning to rinse a Canberra roof has to work within those limits.

The measures do not mention solar panels by name, so ask Icon Water if you are unsure how they apply to your roof. Most professional panel cleaners already work with purified water fed through a soft brush on a pole, which uses far less water than hosing. Gutters, by contrast, can be cleaned at any time by any means under the same measures. Paved areas cannot be hosed down unless there is an accident, fire, health hazard or other emergency. That rule matters if a crew plans to wash grime off paths after finishing on the roof. A broom and bucket usually handles that mess just as well.

Canberra's mains water is soft, and Icon Water lists an average hardness, the dissolved minerals that dry as white spots, of about 43 milligrams per litre (mg/L) of calcium carbonate. That sits well under the 600 mg/L limit in one major panel maker's cleaning manual. Soft water leaves fewer white spots than hard water, but any tap water can still mark glass if it dries in the sun. Purified water leaves almost nothing behind, which is why many cleaners carry their own filtered supply. A final pure water rinse also stops streaks forming on glass that sits in full afternoon sun.

Method Under the Measures What It Leaves Note
Standard garden hose on windows Not allowed, even with a trigger nozzle Spots if left to dry Ask Icon Water about panels
Bucket, brush or squeegee Allowed at any time Little if rinsed well Slow on large arrays
High pressure, low volume cleaner Allowed at any time Depends on the water used Stay within the maker's pressure limit
Purified water through a pole brush Brush methods are listed, confirm details Very little residue Common choice for panel cleaners

Frosty Mornings, Hot Afternoons and Thermal Shock on Glass

Cold mornings and warm afternoons both affect when a Canberra clean should happen. Evoenergy warns never to pour cold water on solar panels when the sun is shining, because this can shatter the glass. Trina Solar's Vertex manual limits the difference between the water temperature and the panel temperature to between minus 5 and plus 10 degrees Celsius. The same manual rules out cleaning in the heat of the day, since sudden cooling can strain the modules, the maker's word for panels.

Frost and dew create a different problem, because they make roof surfaces slippery. Safe Work Australia's rooftop solar guide treats a roof as steep above 26 degrees, or above just 10 degrees when moisture makes it slippery. A roof that is safe to walk on during a dry afternoon may need rails or a restraint line at dawn. A sensible plan starts once any frost has lifted and finishes before the glass becomes hot. Mid morning on a calm, dry day often meets both conditions.

Rain on the day is a reason to postpone a clean, not rush it, because wet conditions also raise the risk of electric shock. Safe Work Australia notes that rain or high humidity can make a person wet and increase that risk. If a booking falls on a wet or icy day, moving it costs far less than a fall or a cracked panel. Ask each business how it handles weather changes and whether rescheduling attracts a fee. A clear answer in writing avoids arguments later. Strong wind is another reason to wait, since it makes poles and ladders harder to control.

Time Glass Roof Surface Suitable for Cleaning?
Frosty dawn Cold, may be iced Slippery No, wait for the frost to lift
Mid morning Mild Usually dry Often the best window
Hot summer afternoon Very hot Hot to touch No, risk of thermal stress
Late afternoon Cooling Dry Possible, check light and wind
During rain Wet Slippery No, higher shock and fall risk

Panel, Inverter and Equipment Makers and Their Cleaning Advice

Trina Solar makes rooftop modules sold in its Vertex S+ and Vertex N series. LONGi makes solar modules including the Hi-MO X10, the Hi-MO 9 and the Hi-MO 7. AIKO makes ABC (all back contact) solar modules, including its Gen 4 INFINITE range for rooftops. Each of these makers publishes manuals that set out cleaning limits for its own panels. Your installer's handover pack should name the brand and model on your roof.

Fronius makes the GEN24 and GEN24 Plus inverters for homes. SMA makes solar inverters and the Sunny Portal monitoring service. Enphase makes IQ9 microinverters, small inverters fitted under each panel, the IQ Battery 5P and the Enphase App. GoodWe makes residential grid tied inverters and the SEMS Monitoring Portal. Sigenergy makes the SigenStor storage system and the mySigen App for homeowners. Tesla makes the Powerwall 3P home battery for storing solar energy.

Kärcher makes window vacuums and pressure washers for home use. Gerni makes high pressure washers, vacuums and cleaning accessories. Bailey makes extension ladders, platform stepladders and ladder accessories. Gorilla Ladders makes industrial grade aluminium extension ladders and height safety gear. Only use a pressure washer near panels if the panel maker's manual allows it and the pressure stays within that limit.

Trina Solar's Vertex manual shows how specific these limits can be. It recommends water with a pH of 6 to 8, close to neutral, and soft water where possible. It sets a recommended pressure limit of 4 MPa (megapascals), also written as 40 bar, and rules out alkaline and strong acid cleaners. It also says brushes should not conduct electricity and that nobody should stand on the modules. Ask a cleaner which manual they have checked for your brand, because limits differ between makers.

One Maker's Cleaning Limits

Every six months, the preventive inspection interval recommended in Trina Solar's Vertex series user manual
Manual point
Stated position
Pressure ceiling
No more than 4 MPa
Brushes
Soft and non-conductive
Acidity of the water
pH from 6 up to 8
Flat mounted arrays
Cleaned more often than tilted ones
Calcium carbonate
600 mg/L at most
Check the manual for your own panels, since a different maker may set tighter limits on pressure, water or chemicals.

Pre-1990 Roofs, Fibro Sheeting and the Loose-Fill Register

ACT Health advises that any home built in the territory before 1990 may contain asbestos. Asbestos cement products, often called fibro or AC sheeting, were used in building materials until the mid 1980s. ACT Health also warns that high pressure water blasters used for cleaning can release fibres from bonded asbestos products, where the fibres are set firmly in cement. The ACT asbestos website has a map of when each suburb was built, which helps owners judge how likely asbestos is. If your home is that age, ask for asbestos testing of the roof before anyone walks on it or rinses it.

WorkSafe ACT guidance on minor asbestos work says cleaning asbestos containing material with high pressure air or water is not minor routine maintenance. By contrast, clearing leaf litter from the gutters of an asbestos cement roof is given as an example of minor routine maintenance. For a panel clean, the safe conclusion is that no pressure washer should be used anywhere near fibro sheeting. A soft brush and gentle rinse on the glass, with runoff kept off broken sheeting, is the safer approach. Nobody should stand on fibro sheeting at all, because it can break underfoot. If sheeting is cracked or crumbling, pause the job until a licensed asbestos assessor or asbestos removal business has given advice.

Another ACT issue is loose fill asbestos insulation, often called Mr Fluffy after the local company that sold it in the 1960s and 1970s. ACT Health says it was used in around 1,000 Canberra homes, and many have since been knocked down under a government scheme to remove it. A small number of known affected properties remain, and they are listed on a public register by street address. Tradespeople are asked to check the register and read the asbestos management plan shown at the main entrance of a listed home. Panel cleaning happens outside, but nobody on the job should enter a roof space on a listed property.

Roof Type Hazard on the Day Better Approach Call In
Concrete or terracotta tile Tiles crack underfoot Pole work, minimal walking Roofer for broken tiles
Steel sheeting Slippery when frosty or wet Restraint line and soft brush Panel cleaner
Fibro or AC sheeting, pre-1990 Fibres released by pressure or impact No pressure, no walking Licensed asbestos assessor
Polycarbonate skylights near the array Brittle, may not hold weight Covers or a marked no-go area Skylight repairer if damaged

Tanks That Collect Water From a Panelled Roof

Some Canberra homes collect roof water in tanks for gardens or toilets, and some rural properties drink it. ACT Health lists bird or animal droppings on roofs as one source of contamination in tank water. It explains that harmful microorganisms may be present even in relatively clear water and can cause severe gastroenteritis, a stomach and bowel illness. It also notes that dust blown onto a roof and washed into a tank can build up chemical residues over time. A panel clean shifts much of that material at once, so plan where the runoff goes.

Before the clean, swing the tank downpipe aside or fit a diverter, a fitting that sends water away from the tank, so the first dirty runoff drains to waste instead. Ask the cleaner to use plain purified water rather than detergent on a roof that feeds a drinking water tank. Reconnect the tank once the roof and gutters have been cleaned and runoff runs clear. A plumber offering rainwater tank plumbing can fit a first flush device, a fitting that dumps the first and dirtiest rain off the roof before water reaches the tank. Mesh from a gutter guard installer also keeps leaves out of the system between cleans. Both upgrades are separate jobs, priced on their own quotes.

Tanks used only for the garden or toilets need less caution, but the same runoff still carries grit and droppings. Letting the first rinse drain away keeps sediment from building up at the bottom of the tank. Check the leaf screens and the strainer where water enters the tank after the clean, since loosened debris often collects there. If the tank feeds an indoor tap through a pump, ask a plumber whether any filter needs changing afterwards. These small steps take minutes and can spare you a much bigger tank clean later.

Cleaning Day on a Tank-Fed Roof

Droppings on roofs, listed by ACT Health as one source of contamination in rainwater tanks
Step
When
Divert the tank downpipe
Before rinsing starts
Brush off droppings
Early in the clean
Clear gutters and leaf screens
During the same visit
Reconnect the tank
Once runoff runs clear
If anyone drinks the tank water, avoid every cleaning product unless its maker states it is safe for drinking water roofs.

Hail Damage and the January 2020 Canberra Storm

On 20 January 2020 a severe storm with hail hit Canberra, and Belconnen, the City and the Inner South were among the worst affected areas. After any hailstorm or severe storm, check your panels from the ground for cracks, loose frames or debris before booking a clean. Hail, roof damage, electrical hazards and local flooding were all reported across the city. Hail can crack panel glass in ways that are hard to see from the ground, so a later clean may be the first close look. The ACT Emergency Services Agency remains the first call for urgent storm help.

Evoenergy says that if a system is damaged by weather, owners should contact a licensed electrician or their installer immediately. If any part is wet or under water, it advises keeping your distance and not touching it. A damaged panel should be assessed and made safe before anyone cleans it, because water on cracked glass raises the shock risk. Photographs taken from the ground before any work help with an insurance claim. Broken tiles or sheeting around the array are a job for storm damage repairs before any washing starts. Replacement panels come from a solar panel installation business, not a cleaner.

Wind after a storm can leave leaves, twigs and grit lodged against the lower edge of the panels. That debris holds moisture and dirt, which then spreads as a muddy line along the bottom of the frame. Ask the cleaner to clear the lower edge and the gap beneath it once the system is confirmed safe. A gutter clean on the same visit stops the same debris blocking downpipes.

After Hail or a Wind Storm

Immediately, when Evoenergy says to contact a licensed electrician or your installer after weather damage
Item
What to do
Cracked or shattered glass
Stay clear and call an electrician
Wet or flooded equipment
Keep your distance
Loose frames or rails
Report them to the installer
Moved or broken tiles
Roofer before any clean
Do not book a clean to remove storm debris until an electrician has confirmed the system is safe to approach.

Licensed Electrical Work Versus Unlicensed Cleaning Work

Access Canberra administers licences for construction occupations such as builders, plumbers, drainers, gasfitters and electricians. Panel cleaning is not one of the licensed occupations, so a cleaner does not need an ACT licence to wash glass. Electrical work is different, and only a licensed electrician may carry out wiring work. Electricians also need a distributed energy resources endorsement to work on solar and battery systems connected to the power grid. That endorsement is often shortened to DER, a term that means equipment such as panels and batteries that feed the network.

A DER endorsement is an extra approval added to an unrestricted electrician licence, the full licence for all electrical work. It covers wiring work on solar panel installations, grid connected inverters and grid connected battery storage. If a cleaning business offers to fix an isolator, the switch that cuts power to the system, rewire a cable or swap an inverter, ask for the electrician's licence number. You can check that number on the public register kept by Access Canberra. Evoenergy also expects the installer to tell it before making any change to an installation. Owners of inverters rated above 30kVA (kilovolt-amperes, a size rating well above most home systems) must have them tested by a licensed electrician at least every five years.

Without a licence to check, the protections that matter with a cleaner are an Australian Business Number (ABN), public liability insurance, a written quote and the consumer guarantees. Ask to see a current certificate of currency, the insurer's proof that the policy is active, for public liability insurance before the crew climbs up. Under the Australian Consumer Law, services must be provided with due care and skill, a rule explained by the ACCC. If a crew cannot show insurance, choose another business rather than taking the risk yourself.

Task Who Does It Licence or Check Question to Ask
Washing glass and frames Panel cleaner No ACT licence, check ABN and insurance Is your public liability current?
Wiring, isolators and inverters Licensed electrician DER endorsement needed What is your licence number?
Periodic test, inverter above 30kVA Licensed electrician At least every five years Does my system need one?
Asbestos roof assessment Licensed asbestos assessor Licensed through WorkSafe ACT Can you test the roof sheeting?
Broken tiles or sheeting Roofer ABN, insurance and written quote Will you check under the array?

Mynas, Pigeons and Native Nests Under the Panels

The gap between an array and the roof gives birds a sheltered ledge, and droppings soon follow. The ACT Government notes that common mynas are well established in almost every Canberra suburb. It also says mynas compete with native wildlife and sometimes push native birds and mammals out of tree hollows. Droppings under and on the panels add to the grime a cleaner must remove, and they can leave stubborn marks on the glass if left for months.

Native birds are a different matter, because the ACT Government says it is an offence to interfere with a native animal's nest. A licence is needed to do so anywhere in the ACT, and no fee applies, according to the ACT environment website. Before anyone removes a nest, find out which species built it and whether eggs or chicks are present. Once the area is clear, bird proofing mesh can be fitted around the edge of the array, priced on quote. For pigeons, rodents or insects in the roof, a pest control business can advise on the next step.

Droppings need patience rather than force during the clean itself. Trina Solar's manual calls for soft tools that will not wear the glass, the frame or the seals. A careful cleaner soaks dried droppings first, then lifts them with a soft brush rather than scraping. Ask how the crew will deal with droppings under the array, where a brush cannot always reach. Mesh fitted after the clean keeps that area clear and cuts down the next round of mess. If droppings wash into gutters that feed a tank, follow the tank steps described earlier on this page.

Before Anyone Touches a Nest

Step
Why
Identify the species
Native nests need a licence to disturb
Look for eggs or chicks
Active nests need extra care
Ask Licensing and Compliance
Advice on native birds
Fit mesh once clear
Stops birds coming back

The ACT Government lists 02 6207 6376 for its Licensing and Compliance team.

Clean droppings off the roof and panels before any mesh is fitted, not after.

Leave any nest holding eggs or young in place until the species is known and the licence question is settled.

From Gungahlin to Tuggeranong and the Rural Villages

Panel cleaners work across the ACT's districts, including Belconnen, Gungahlin, the Inner North and Inner South, Woden, Weston Creek, Molonglo Valley and Tuggeranong. Some newer homes are built close to the boundary, which can limit where a ladder or scaffold can stand. Older inner suburbs are more likely to have pre-1990 roofs that need an asbestos check before anyone walks on them. Established street trees drop leaves and blossom onto arrays and into gutters, so timing a clean after leaf fall makes sense. Each of those factors changes the access plan more than the suburb name itself.

Rural properties and villages such as Hall, Tharwa and Uriarra sit some distance from the main suburbs. Travel time is usually shown as a separate line or included in a minimum call out charge, the least a business charges for any visit. Grouping a panel clean with a gutter or roof job on the same trip can make the travel cost easier to justify. Ask whether a cleaner already works in your area on a regular day, since that can lower the travel charge.

Access on the day often decides how smoothly a clean goes. Tell the crew about locked side gates, dogs, steep driveways and where a vehicle carrying a water tank can park. Narrow side passages may mean hoses or poles have to come through the house or over a fence. A clear path to the yard below the array helps, so move cars, bins and outdoor furniture away from where water drips off the roof edge before the crew arrives.

Area Common Roof Issue Timing Tip Quote Note
Inner North and Inner South Older roofs, possible fibro Asbestos check before booking Ask about roof walking
Belconnen and Woden Street trees and leaf litter After autumn leaf fall Gutters on a separate line
Gungahlin and Molonglo Valley Homes close to the boundary Mid morning on calm days Access gear on the quote
Tuggeranong and Weston Creek Mixed roof ages Avoid frosty starts Travel included or listed
Hall, Tharwa and rural leases Tank-fed roofs, longer drives Combine with other roof work Travel shown separately

Refunds, Repairs and Taking a Dispute to ACAT

The ACT Government names Access Canberra as the regulator that enforces the Australian Consumer Law in the territory. Under that law, a service must be provided with due care and skill and be fit for any purpose you told the business about. If a clean scratches the glass, cracks tiles or leaves the array dirtier, raise it with the business in writing first. Include photos, the date of the clean and what you want done, such as a repair, a refund or a return visit. Access Canberra can help resolve consumer issues if the business does not respond.

If talking does not settle it, ACAT can hear civil disputes where the amount claimed is $25,000 or less. The civil disputes it can hear include those over goods or services, breach of contract and compensation for negligence. ACAT asks parties to try negotiation or mediation before applying, since settling directly is often faster and cheaper. A fee applies to lodge an application unless you qualify for an exemption, waiver or deferral. Claims above $25,000 can still be heard if you give up the amount above $25,000 or the other side agrees in writing.

Keep the written quote, any messages and before and after photos together until the matter is settled. Damage to tiles or sheeting should be fixed by a business offering roof repairs, and an electrician should check any panel that was knocked. Their written reports carry weight if the dispute reaches the tribunal. Ask the cleaning business for its insurer's details if it accepts that its crew caused the damage.

What to Look Out For Before a Crew Climbs Onto Your Roof

Offers to wash panels that you did not ask for, whether at the door or by phone, deserve extra care. The ACCC says door to door sellers may only visit on weekdays from 9am to 6pm and Saturdays from 9am to 5pm. They cannot call on Sundays or public holidays, and they must leave straight away if you ask. For agreements worth $100 or more, you get a cooling-off period of 10 business days. During that time the seller cannot supply the service or take payment, apart from electricity, gas or emergency repairs.

Be wary of claims that a clean will lift output by a fixed percentage without any look at your monitoring data. Grime, shade, panel age and inverter faults all affect output, so a promise made from the street is only a guess. Also be cautious if a business asks for full payment before work starts, or will not give a written quote. A crew that wants to walk across the panels, or plans to use a pressure washer on a pre-1990 roof, should not start. Politely ending the visit costs you nothing, while a damaged array can cost thousands.

Ask how the business will reach the roof and whether rails, anchors or a pole from the ground are planned. Check that the quote names the water used and any cleaning product, especially on a tank-fed roof. Confirm who will be on the roof and whether they work for the business or a subcontractor. Finally, ask what happens if the crew finds a cracked panel or a loose cable during the job. The answer should be that work stops and you are told before anything else happens. Anything vaguer suggests the business has not thought through the electrical side.

Checks Before You Say Yes

Look for
A trading name and ABN that match, plus contact details that work.
A current certificate of currency for public liability insurance.
The exact number of panels and any the crew cannot reach safely.
The access plan, with rails, anchors or a pole from the yard named.
The water source and any cleaning product listed by name.
No start date or payment inside a doorstep cooling-off period.

An output promise means little unless it is based on your own monitoring data.

Paying everything up front, before anyone has been on the roof, removes your bargaining power.

Turn down any same day roof start offered at your front door, even if the deal sounds generous.

Getting Quotes That Line Up Across Canberra Cleaning Businesses

Give every business the same brief so the prices can be compared fairly. Include your suburb, how many panels sit on the roof, whether the house is one or two levels, what the roof is made of and its build year. Mention any rainwater tank, skylights near the array, nesting birds and any known storm damage. Photos of the array taken from the ground help a cleaner judge access before visiting. The more detail you give, the fewer surprises appear on the final invoice.

Ask each business to separate the panel clean from extras such as gutters, windows, roof cleaning and bird mesh. Some businesses listed under ACT cleaning services also handle indoor jobs, so ask for each job on its own line. That keeps an oven cleaning or mattress cleaning booking from hiding the true price of the roof work. A specialist panel cleaner and a broader roof business may suit different homes, and separate lines show which is better value. Separate lines also make it simple to drop an extra later without asking for a fresh quote.

Compare quotes on the access method, water, insurance and what happens if damage is found, not just the total. Ask how long the business has worked on Canberra roofs and whether it can describe a similar job. Put the agreed panel count, date, price and any weather clause in writing before the crew arrives. If you would rather start with one general booking, you can hire a cleaner in Canberra and ask about roof work. Post your job once and compare written quotes from local cleaners who see the same details. That way every price you receive covers exactly the same job.

Solar Panel Cleaners Across the ACT

Solar panel cleaning advice on this page applies across the Australian Capital Territory. Suburban jobs are usually the easiest to book, while rural leases and villages may need a crew to travel or combine several roof jobs into one trip.

▶ North Canberra 16 areas
Civic Acton Braddon Turner Reid Campbell Russell Ainslie Dickson Downer Hackett Watson Lyneham O’Connor Majura Pialligo
▶ South Canberra, Woden & Weston Creek 32 areas
Barton Forrest Kingston Griffith Narrabundah Red Hill Deakin Yarralumla Curtin Garran Hughes Phillip Woden Mawson Pearce Torrens Chifley Lyons Farrer Isaacs Weston Holder Duffy Stirling Rivett Chapman Fisher Waramanga Wright Coombs Denman Prospect Whitlam
▶ Belconnen 28 areas
Belconnen Bruce Aranda Cook Hawker Weetangera Page Scullin Higgins Holt Latham Macgregor Charnwood Dunlop Fraser Flynn Florey Melba Evatt Spence McKellar Lawson Jamison Kaleen Giralang Macquarie Hall Belconnen Town Centre
▶ Gungahlin 18 areas
Gungahlin Harrison Franklin Palmerston Nicholls Ngunnawal Amaroo Forde Bonner Moncrieff Casey Taylor Throsby Jacka Crace Mitchell Gundaroo Sutton
▶ Tuggeranong 20 areas
Tuggeranong Greenway Kambah Wanniassa Oxley Fadden Gowrie Macarthur Monash Gilmore Chisholm Richardson Calwell Theodore Isabella Plains Bonython Gordon Banks Conder Tharwa

Solar Panel Cleaning FAQ

Can I hose my panels from the ground under Canberra's water rules?
Icon Water's permanent measures say windows cannot be washed with a standard garden hose, even with a trigger nozzle. Windows and other external parts of buildings may be washed with a bucket and mop, brush, squeegee or a high pressure, low volume cleaner. The measures do not name solar panels, so check with Icon Water if you are unsure. Standing on a ladder with a hose also adds a fall risk, so a professional pole and brush is usually the safer choice.
Is an early frosty morning a good time to have the panels washed?
No, because frost and dew make roof surfaces slippery. Safe Work Australia treats a roof as steep above just 10 degrees when moisture makes it slippery. Cold glass also needs care, since Trina Solar's manual limits the gap between water and panel temperature. Mid morning on a calm, dry day is usually a better time to start.
Who is allowed to switch off or work on my solar wiring in the ACT?
Only a licensed electrician may carry out wiring work on the system. Electricians also need a distributed energy resources (DER) endorsement, an added approval on their licence, for solar and battery systems connected to the grid. Ask for the licence number and check it on Access Canberra's public register. A cleaner should leave plugs, isolators, cables and the inverter alone.
Does Evoenergy require a periodic test on a home solar system?
Evoenergy requires owners of inverters above 30kVA to have them tested at least once every five years. Most household inverters are smaller than that, so check the rating on your paperwork. The test checks that the inverter disconnects from the network during a power interruption. A licensed electrician does the test, and in a rental the property owner is responsible for arranging it.
Our home was built in the 1970s. What should a panel cleaner know before starting?
ACT Health says any home built in the territory before 1990 may contain asbestos. Tell the cleaner the build year and the roof material before they quote. If the roof is fibro, no pressure washer should be used and nobody should walk on the sheeting. Have a licensed asbestos assessor check doubtful material first, and check whether the address appears on the loose fill register.
A myna has nested under the array. Can the crew pull it out?
The ACT Government says common mynas are established in almost every Canberra suburb. Native birds are treated differently, because interfering with a native animal's nest needs a licence anywhere in the ACT. Identify the bird and check for eggs or chicks before anything is removed. Once the area is clear, bird proofing mesh can stop birds returning, priced on quote.
Should hail-damaged panels be checked before they are cleaned?
Yes, because water on cracked glass raises the risk of electric shock. Evoenergy says to contact a licensed electrician or your installer immediately after weather damage. If any part is wet or under water, keep your distance and do not touch it. Book the clean only after the system has been confirmed safe.
Is panel washing one of the jobs Access Canberra licenses?
No, panel cleaning is not among the construction occupations that Access Canberra licenses. Builders, plumbers, drainers, gasfitters and electricians are licensed, but a cleaner washing glass is not. That makes an ABN, public liability insurance and a clear written quote more important. Any electrical work found during the clean still needs a licensed electrician with the right endorsement.
Can a dispute about roof or panel damage go to ACAT?
Yes, ACAT hears civil disputes where the amount claimed is $25,000 or less. That includes disputes about services, breach of contract and compensation for negligence. ACAT asks parties to try negotiation or mediation first. Keep the quote, photos and any repair reports, because they support your claim.
How often should an array on a Canberra roof be washed?
There is no fixed interval set by any ACT rule. Trina Solar's manual says flat mounted panels need cleaning more often, and it recommends a preventive inspection every six months. Evoenergy suggests checking the inverter display or online generation data from time to time. A steady drop in output on clear days, or visible droppings on the glass, is a good prompt to book.

Roof and Solar Specialists ACT

For Trades & Contractors - ACT

Panel cleaning in Canberra often leads to other roof and electrical work. Electricians with the right endorsement handle wiring, isolators and inverters, while roofers fix tiles and sheeting found broken during a clean.

Compare Solar Panel Cleaning Quotes

Tell us your suburb, the number of panels and your roof type, then compare quotes from local solar panel cleaners across the ACT.

Get Free Solar Panel Cleaning Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All ACT tradies are required to hold appropriate licences. Verify at Access Canberra.
Prices are 2027 estimates for typical ACT homes. Solar panel cleaning itself is priced on quote, so compare written quotes that list the panel count, access method, water, travel and each extra separately.
Need work done? Get free quotes. Post a Job – It's Free