Need Starlink Installed?
Tell us the property type, where you want the dish mounted and how far it sits from the router position. We'll connect you with NSW installers.
Free · No obligation · NSW-wide
Typical Starlink Install Costs NSW
Ground or pole mount, simple$260 - $580
Roof mount, single storey$420 - $950
Roof mount, two storey or steep$650 - $1,650
Cable run and entry point$180 - $520
Ethernet point to a work area$160 - $420 per point
Mesh or router setup$180 - $650
Obstruction survey and relocation$150 - $450
Farm or shed to house link$650 - $3,200
Indicative 2026 NSW estimates and installation only, excluding the Starlink hardware and subscription. Mount type, height, cable distance and roof access all move the price.
Starlink Installation Services NSW 2026 - Get Quotes
Starlink arrives as a kit you can plug in yourself, which is exactly why so many installations end up needing a second visit. The dish has to see a clear patch of sky with nothing clipping its field of view, the cable has to enter the building without creating a leak, and concealed cabling that ties into a telecommunications network is work a registered cabler must do and certify in writing. Sitting the dish on the lawn works until a tree grows. Trees are the usual culprit across New South Wales, and they keep growing after the installer has gone, so a position chosen for today rather than five years ahead disappoints by the second summer. The app checks for obstructions, though it must be run from the height the dish will occupy, since a reading taken in the yard says little about what a roof mount sees. Rural properties add distance as well, because the run from the dish to where people actually work can exceed what ordinary cable will carry. Getting the position, the mount and the cable path right at the start separates a connection that holds up from one that drops out every afternoon. Post your job on The Quote Yard to reach installers across New South Wales.
At a Glance - Mounting Options Compared
| Mount | Suits | Cost | Trade Off |
|---|---|---|---|
| Supplied base on the ground | Testing, temporary use | Nothing extra | Obstructions and weather |
| Ground pole | Open rural blocks | $260 - $580 | Long cable run |
| Roof mount | Most suburban homes | $420 - $1,650 | Penetrations to seal |
| Wall or eave bracket | Clear aspect, easy access | $320 - $780 | Limited sky view |
| Non penetrating roof frame | Flat roofs, tile avoidance | $480 - $1,400 | Ballast weight |
| Dedicated mast or tower | Heavy tree cover | Quoted per site | Engineering and access |
You Are Entitled to a Written Cabling Statement
Telecommunications customer cabling in Australia sits under the Cabling Provider Rules administered by the communications regulator. Anybody performing that work must hold an appropriate registration, being Open, Restricted or Lift depending on the scope, or be directly supervised by somebody who does, and the work must comply with the wiring rules in AS/CA S009.
The part customers almost never hear about is the paperwork. On finishing the job the cabler must prepare a written statement certifying the work complies with the wiring rules, give a copy to the customer who commissioned it, and keep a copy for at least a year. It can be the approved cabling advice form or their own statement attached to the invoice.
So if somebody runs fixed or concealed cabling through your walls as part of a Starlink installation, ask for that statement. It costs nothing, it is your entitlement, and a contractor who looks blank at the request has told you something useful about how they work. The wiring rules that cabling work must satisfy are published by Standards Australia, and general electrical work sits with electrical services contractors.
Siting the Dish and Understanding Obstructions
Everything about a satellite internet installation follows from where the dish can see. The terminal tracks satellites moving across a wide arc of sky, so it needs an unobstructed view over a substantial cone rather than a single clear line, so anything intruding into that cone produces brief dropouts each time a satellite passes behind it. A branch that clips the edge causes a few seconds of interruption at unpredictable intervals, which is far more frustrating to live with than a connection that fails outright. The obstruction check built into the Starlink app is the starting point and it is genuinely useful, since it maps what the terminal can see from a given position and reports what proportion of the view is blocked. Run it from several candidate positions before anybody drills anything, and run it at the height the dish will actually sit not at ground level, because two metres of elevation frequently clears a fence line or a neighbouring roof entirely. Trees are the problem that gets underestimated across New South Wales.
A eucalypt that clears the view today grows, and a sapling twenty metres from the house becomes an obstruction within a few years, so siting decisions should allow for what the vegetation will look like in five years and not merely today. Deciduous trees are worse than they appear in winter and better than they appear in summer, which catches people who install during the wrong season. Two practical habits save a return visit. Test from the intended position with the terminal temporarily placed there and let it run for a few hours for a few hours, not a few minutes, since obstruction data improves as the terminal builds a picture of the sky. And where the only clear aspect is awkward, weigh a longer cable run against a compromised position, because cable is cheap and dropouts are permanent. Tree work around a planned installation is handled by tree removal and pruning contractors.
| Obstruction | Effect | Usual Fix |
|---|---|---|
| Overhanging branch | Brief repeated dropouts | Raise the mount or prune |
| Neighbouring roofline | Blocked sector of sky | Height or reposition |
| Chimney or aerial | Narrow blind spot | Move a metre or two |
| Growing vegetation | Worsens over years | Allow margin at install |
| Verandah or pergola | Large blocked area | Mount above it |
| Hillside or escarpment | Low horizon blocked | Best available aspect |
Mounting the Terminal Properly
The supplied base is designed to sit the terminal on a flat surface for testing, and it is not a permanent outdoor mount. Wind is the reason, since a dish presents a surface area that catches gusts and an unsecured terminal on a roof or a deck becomes a projectile in the kind of southerly buster that arrives across the coast most summers. Anything left in place beyond initial testing should be mechanically fixed. Roof mounting is the common answer on suburban properties and the detail matters more than the bracket.
Fixings need to land in structure not sheeting or tile alone, penetrations need proper flashing not a smear of silicone, and the installer should be working from appropriate access equipment and not balancing on a pitched roof. A dish fixed through a tile without support cracks the tile and produces a leak that appears months later during sustained rain. Pole and ground mounts suit rural properties and avoid roof penetrations altogether, at the cost of a longer cable run and a structure that has to resist wind loading on its own. Concrete footings sized for the exposure, galvanised or treated components, and a position clear of stock, machinery and vehicles are the essentials.
Non penetrating ballasted frames work on flat commercial roofs where making holes in a membrane is undesirable. Two details separate a durable installation from one that needs revisiting. Every penetration must be properly flashed and sealed with the intention that it outlasts the hardware, because roofs leak at fixings long after everybody has forgotten what made the hole. And the mount should allow the terminal to be removed and refitted without dismantling the whole arrangement, since hardware gets replaced and upgraded over time. Roof penetrations and flashing are handled by roofing services contractors where the roof itself is involved.
Cabling, Entry Points and Who May Do the Work
The cable run is where most installations are won or lost, and it involves two separate considerations that installers sometimes blur together. One is weatherproofing, meaning how the cable gets from outside to inside without creating a path for water. The other is regulatory, as cabling run through the building fabric into a telecommunications network falls under the national rules regardless of who supplied the equipment. The rules governing that work are clear enough. Whoever pulls that cable needs a registration matching the scope of the job, or must work under somebody who holds one, and the finished installation has to satisfy the national wiring rules.
Keeping comms cable clear of electrical cable is one requirement those rules impose, and a signed compliance statement handed over at the end is another. Both are set out in detail further down this page. Weatherproofing is where workmanship shows. A cable entering through a wall needs a properly formed penetration with a drip loop so water runs away from the hole rather than along the cable into it, sealed with an appropriate product rather than whatever was in the van.
Entry through an eave or soffit is generally tidier than through a wall, entry below the dish rather than above it is better again, and drilling through a window frame is a shortcut that creates a permanent problem. Route planning deserves more thought than it usually gets. Cable should avoid sharp bends, sit clear of anywhere it will be stood on or mown over, run in conduit where it is exposed to sun or stock, and terminate somewhere the router can sit with power and reasonable central position in the house. Structured cabling through the building is quoted by registered data cabling installation specialists.
The Cabling Rules Nobody Explains to Customers
Telecommunications cabling in Australia is regulated nationally and the requirements are more substantial than most customers realise, which matters because the rules exist to protect the person in the building instead of the industry. Anyone carrying out telecommunications customer cabling has to be registered, or working directly under a person who is, and the scheme runs to three categories. Open is the broadest and covers cabling terminating at a network boundary or termination device across residential, commercial and industrial premises, Restricted which is narrower, and Lift which deals with telecommunications cabling in lifts and attaches to an existing electrical qualification. Registration is issued through registrars accredited by the national regulator, and a registered cabler carries a card demonstrating it. The technical requirements sit in the wiring rules, which govern installation and maintenance of concealed and fixed cabling tied into a telecommunications network and impose requirements covering segregation from electrical wiring and the use of compliant, properly labelled products. The part that benefits customers most directly is the certification requirement, since finishing the job obliges the cabler to certify in writing that it meets the wiring rules, hand that certificate to whoever commissioned the work, and hold a copy themselves for a minimum of twelve months. The wording may follow the standard advice form or appear on the invoice, and either discharges the duty. Where an unregistered person does cabling work to gain experience, a registered cabler must supervise them directly and takes full responsibility for the result, including preparing that statement. Two things follow for anybody commissioning work. Ask whether the person doing your cabling is registered and in which category, because the answer is straightforward for somebody who is. And ask for the compliance statement at the end instead of assuming it will arrive, since it is your entitlement and it is the document that matters if anything goes wrong later. Structured cabling throughout a building is installed by data cabling installation contractors.
Strata, Rentals and Heritage Properties
Fitting a dish to a building you do not solely own brings a permission question before a technical one. On a strata scheme the roof and external walls are usually common property, which means mounting anything to them needs the owners corporation's approval and not just the lot owner's decision, and installing first frequently ends in a notice to remove it. Most schemes deal with these requests routinely, so asking is usually quick. Renters sit in a similar position. Fixing a mount to the roof or drilling a cable entry through a wall is an alteration to the property, so it needs the landlord's consent, and the agreement should cover what happens at the end of the tenancy. A ground mount with a surface run cable is often the practical compromise, since it can be removed leaving nothing behind.
Heritage listings and conservation areas add a planning dimension across parts of New South Wales, particularly in the older inner suburbs and the historic country towns. Where a listing or an overlay controls external appearance, a dish visible from the street may need consent, and a position on a rear roof plane or behind a parapet is both easier to approve and less likely to attract attention. One call handles most of it. Ask the owners corporation, the landlord or the council before ordering an installation instead of afterwards, and where appearance is the concern discuss a less visible position with the installer at quoting stage. Shared building infrastructure is coordinated through intercom and access control installation contractors who work with owners corporations regularly.
| Property | Permission Needed | Practical Approach |
|---|---|---|
| Freestanding house you own | Generally none | Check heritage overlays |
| Strata apartment or unit | Owners corporation | Ask before ordering |
| Rented property | Landlord consent | Agree reinstatement terms |
| Heritage listed | Possibly council consent | Rear roof plane |
| Conservation area | Depends on visibility | Keep it off the street face |
| Commercial tenancy | Landlord and lease terms | Check make good clauses |
Farms, Sheds and Rural New South Wales
Satellite internet has changed what is possible on rural properties across the state, and the installations that work best are planned as small networks and not as a single dish beside a house. A working farm typically needs coverage at the house, at the machinery shed, at the yards and sometimes at a worker's cottage several hundred metres away, and solving that properly at installation costs far less than adding to it piecemeal later. Distance is the constraint that shapes the design. Standard ethernet runs to around a hundred metres before signal degrades, which covers a house and an adjacent shed and nothing beyond, so longer links need either fibre, which handles considerable distance and is immune to the electrical interference farm machinery produces, or a point to point wireless bridge between buildings with line of sight. Both are ordinary solutions and a competent installer will price them without drama.
Siting on a rural block has more freedom and more hazards. There is usually somewhere with a genuinely clear view, though it may be away from the house, and the position needs to account for stock rubbing against a pole, machinery working nearby, dust, and cable runs crossing ground that gets ploughed or graded. Burying cable in conduit at a sensible depth and recording where it runs saves somebody cutting it with a trencher in three years. Planning for reliability matters more where the alternatives are thin. Properties across the western districts, the Riverina, the New England and the far west often have marginal mobile coverage, which makes the satellite connection the only practical link for business, schooling and emergencies, so battery backup on the terminal and router is a sensible investment and not a luxury. Power supply work on rural properties is handled by electrical services contractors.
Satellite Against the Alternatives
Satellite internet is one option among several across New South Wales and the sensible approach is to establish what is actually available at the address before committing to any of them. Fixed line services remain the better choice wherever a decent one is available, offering lower latency, no weather sensitivity, no dish to mount and generally lower running costs, so the first step is checking what the address can actually get rather than assuming. Fixed wireless services delivered from a ground tower suit properties within range of one and sit between fixed line and satellite on both performance and availability, though they depend on line of sight to the tower and become congested where many premises share it. Mobile broadband through a router on a cellular network works well where coverage is genuinely strong and is simple to set up with no installation at all, and it becomes unreliable at the edge of coverage where signal varies with weather, foliage and network load, which describes a great deal of regional New South Wales. External antennas can improve a marginal mobile connection substantially and are worth trying before concluding that mobile will not work. Low earth orbit satellite has changed the calculation for properties where none of the above work, delivering performance that earlier satellite services could not approach, at the cost of hardware, a dish that needs siting and mounting, and sensitivity to obstruction. Older geostationary satellite services still exist and remain relevant for some remote premises. The practical method is to check availability at the specific address across all of these, weigh the total cost including installation and hardware not only the monthly figure, and consider whether a combination makes sense, since many rural businesses run a primary connection with a different technology as backup precisely because a single point of failure is unacceptable. Where redundancy is the goal, the two connections should use genuinely different infrastructure and not two services that fail together. Coverage problems inside the house once the dish is working are handled by wifi troubleshooting specialists.
Routers, Mesh and Getting Coverage Through the House
A satellite connection delivers bandwidth to one point in the building, and what happens after that determines what the household actually experiences. The supplied router is competent for a small or medium home with an open plan layout, and it struggles in the situations Australian housing produces constantly, meaning double brick walls, long rectangular floor plans, extensions with foil backed insulation, and a router parked in a corner because that is where the cable came in. Mesh systems solve most of that by placing additional nodes through the building, and they work far better when the nodes connect back to the main unit by cable and not wirelessly. An ethernet run to each node costs a little at installation and roughly doubles the usable throughput compared with nodes relaying wirelessly, which is why a good installer asks about the floor plan before recommending hardware.
Wired points still earn their keep in most homes. Anything stationary and bandwidth hungry, meaning a desktop, a smart television, a games console or a work from home setup, performs better and more consistently on a cable, and running a few points during the installation is dramatically cheaper than retrofitting them. Two or three well placed outlets usually cover a household's needs for years. Placement of the main router deserves a moment's thought and should not default to convenience. Central in the floor plan, off the floor, away from large metal objects and out of a cupboard makes a measurable difference before any additional hardware is bought. Home network design and coverage is handled by data cabling installation contractors, with entertainment systems through home theatre and audio visual installation specialists.
| Situation | What Works | Why |
|---|---|---|
| Small open plan home | Supplied router, central | Usually sufficient |
| Double brick or rendered | Mesh with wired nodes | Walls block signal |
| Long or L shaped house | Two or three nodes | Distance and corners |
| Home office or study | Wired ethernet point | Consistency for calls |
| Separate shed or studio | Fibre or wireless bridge | Beyond ethernet range |
| Two storey with extension | Node per level, cabled | Foil insulation blocks |
Power, Weather and Keeping It Running
The terminal draws power continuously and warms itself in cold conditions, so consumption varies with the weather and does not sit at a constant figure. That matters on properties running off grid or on a generator, where a continuous draw plus occasional higher demand needs accounting for in the system sizing, and it matters for anybody planning battery backup because the terminal is a meaningful load rather than a trivial one. Outages take the connection down in a way people forget until it happens. The dish and the router both need mains power, so a blackout removes the internet even though the satellites are unaffected, which is worth planning for in the parts of New South Wales where storms drop the supply regularly. A modest uninterruptible supply covering the terminal and the router keeps a household connected through the short interruptions that make up most outages. Weather affects performance in ways worth understanding and not worth worrying about.
Heavy rain attenuates the signal briefly, the terminal manages snow and ice by heating itself where that applies, and the practical effect in most of the state is short reductions during intense downpours and not sustained loss. What causes persistent trouble is almost always obstruction rather than weather. Maintenance is minimal without being nothing at all. Check the dish occasionally for accumulated leaf litter, bird nesting and the dust that builds up through a western New South Wales summer, confirm that fixings remain tight after storm season, and inspect the cable entry seal once a year. Anything exposed on a roof deserves the same attention as the rest of the roof. Storm damage to mounted equipment is assessed by roof repairs contractors, with smaller jobs covered by handyman services providers.
Where Satellite Internet Actually Solves Something in NSW
The case varies sharply between the coast and the west.
New South Wales covers enough ground that satellite internet means quite different things depending on where the property sits, and understanding which situation applies leads to a better installation decision than a generic recommendation. Across the far west, the Central West beyond the larger towns, the Riverina, New England and the north western plains, satellite is frequently the only practical option for a working connection, and the installation should be treated as critical infrastructure with battery backup, weatherproof cable runs and coverage extended to the buildings people actually work in and not only the house. The coastal hinterland presents a different problem, where properties in the Blue Mountains, the Southern Highlands, the Hunter Valley, the Northern Rivers and the South Coast often have some fixed line service available but heavy tree cover and steep terrain, which makes obstruction the dominant siting challenge and sometimes pushes the dish onto a mast or an unexpected part of the roof. Around Sydney and the larger regional cities the usual driver is redundancy rather than absence, with households and small businesses adding a satellite connection as a backup that takes over when the primary service fails, and those installations need failover configured and tested and not simply installed. Properties on the urban fringe and in the newer growth areas sometimes sit in a gap where fixed line infrastructure has not reached a particular street, and satellite covers the interval. Coastal and near coastal installations everywhere add corrosion to the equation, so stainless fixings and marine grade brackets earn their cost on anything within reach of salt air. Two practical points follow. Tell the installer which of these situations applies, because an installation intended as a backup for a Sydney business is designed differently from one that is the sole connection on a property near Bourke. And in heavily treed country, budget for the possibility that the best position is not the convenient one, since height or distance from the house is frequently what makes the difference. Free to air reception alongside a satellite service is handled by TV antenna and point installation and antenna installation contractors.
What to Realistically Expect
Expectations are worth setting honestly before the hardware arrives, because satellite internet is genuinely transformative for properties that had nothing usable and is not identical to a good fixed line service. Speeds are generally strong enough for video calls, streaming, cloud work and several people using the connection at once, which is the practical threshold most households care about. Performance varies with how many users share capacity in your area and with the time of day, in the same way any shared network behaves. Latency is the technical difference that shows up in specific activities.
The round trip to a low orbit satellite and back adds delay that most uses never notice, and competitive online gaming and some remote desktop or trading applications are sensitive enough that it can matter. Nobody perceives the difference on an ordinary video call. Obstruction, not bandwidth, is the failure mode worth understanding. A connection that measures well during a speed test and still frustrates people is almost always dropping out briefly and repeatedly because something intrudes into the sky view, and that shows up as calls stuttering and pages hanging not as a slow connection.
Diagnosing it means looking at the obstruction data not running more speed tests. One practical consequence for anybody switching. Keep the old connection running in parallel for a few weeks where you can, use the satellite service through a full cycle of weather and household activity, and only then cancel, because an installation that looked perfect on a clear afternoon occasionally reveals a problem when the trees move in a westerly. Fault diagnosis on existing services is handled by electrical fault finding and network contractors.
| Use | Generally Fine | Watch For |
|---|---|---|
| Video calls and meetings | Yes | Obstruction causes stutter |
| Streaming, multiple devices | Yes | Peak period variation |
| Cloud backup and file sync | Yes | Upload slower than download |
| Competitive online gaming | Usually workable | Latency sensitive titles |
| Remote desktop and trading | Mostly | Some applications notice delay |
| Payment terminals, telemetry | Yes | Needs power backup |
Planning the Installation Visit
A satellite installation goes much better when the groundwork happens before the installer arrives, and most of it costs nothing. Decide roughly where the router should live, since that position governs the cable run and is awkward to change afterwards, and think about where the household actually uses the internet not where the power point happens to be. Have the access conversation in advance. Confirm the roof material and its approximate age, mention anything brittle or previously repaired, clear the area beneath the intended mounting position, and make sure the installer knows about pets, stock, locked gates and anything else that affects a working day on a property. On rural blocks, give directions that work and not a map pin.
Expect the visit to start with assessment instead of drilling. A competent installer will run the obstruction check from the proposed position, look at the roof structure and the cable path, and discuss options before committing, and they may recommend something different from what you had in mind. That conversation is the most valuable part of the visit. Handover deserves a few minutes of attention. Have the connection tested in front of you, get the obstruction result and the mounting detail photographed, collect the signed cabling certificate where cable was run, and confirm what happens if the position proves obstructed once it has run for a week. Connectivity matters during emergencies, and preparedness information for rural properties is published by the NSW Rural Fire Service.
Switching Over Without Losing Service
Households moving from an existing service to satellite frequently create an avoidable gap, and a little sequencing prevents it. Order and install the new connection while the old one is still running, prove it through a normal week of household use, and cancel the previous service only once you are satisfied. Cancelling first leaves you dependent on an installation that has not been tested under real conditions. Some equipment needs attention during that changeover. Devices configured against the old network, including printers, cameras, smart speakers and anything with a hardcoded address, need reconnecting to the new network, and a business relying on a fixed IP address or a VPN tunnel back to an office should confirm compatibility before committing rather than discovering it afterwards.
Landline services deserve a check of their own before anything is switched off. Where a household still uses a phone service delivered over the previous connection, moving the internet does not automatically carry the phone with it, and a number worth keeping needs porting arranged deliberately. Medical alarms, lift phones and monitored alarm systems are the other devices that depend on a working line and can quietly stop functioning after a change. Two habits are worth keeping through the changeover. Keep the old hardware until the new service has proven itself through storm season, and photograph or note the settings of anything you reconfigure so it can be restored. Monitored alarm systems needing reconfiguration are handled by alarm system installation contractors.
What Starlink Installation Costs in New South Wales
Installation is quoted separately from the hardware and the subscription, and the range reflects how much work sits between the box and a finished connection. A simple ground or pole mount on an accessible rural block runs $260 to $580, a roof mount on a single storey house $420 to $950, and a roof mount on a two storey or steeply pitched roof $650 to $1,650 once proper access is allowed for. The supporting items make up the rest. A cable run with a properly formed and sealed entry point costs $180 to $520 depending on distance and difficulty, additional ethernet points $160 to $420 each, and router or mesh configuration $180 to $650 depending on how many nodes are involved.
An obstruction survey with relocation of an existing terminal runs $150 to $450. Rural and multi building work sits outside those figures. Linking a shed or a second dwelling back to the house involves fibre or a wireless bridge, trenching or aerial runs, and weatherproof enclosures at each end, which lands between $650 and $3,200 depending on distance and terrain. Any trenching across a working property adds its own cost.
Several things legitimately raise a quote and should appear as separate lines and not absorbed into a single figure. Access equipment for a two storey or steep roof, trenching or conduit, a non penetrating frame on a commercial roof, battery backup hardware, and travel to a remote property are all real costs. Ask for each one itemised. General electrical additions during the same visit are priced by electrical services contractors.
| Line Item | NSW 2026 | Often Missing From a Cheap Quote |
|---|---|---|
| Roof access equipment | $200 - $900 | Ladder work assumed |
| Flashed cable entry | $180 - $520 | Silicone over a drilled hole |
| Cabling compliance statement | Included by registered cablers | Never provided |
| Conduit and trenching | Quoted per metre | Cable laid on the ground |
| Mesh nodes cabled back | $160 - $420 per point | Wireless relay only |
| Travel to remote sites | Priced per job | Added after acceptance |
Business, Backup and Commercial Sites
Businesses use satellite internet for two quite different jobs and the installation differs accordingly. As a primary connection it suits sites where fixed line services are poor or absent, taking in rural operations, construction sites, remote depots and temporary premises. As a backup it sits alongside a fixed line service and carries the load when that service fails, which matters for anything where payment terminals, bookings or telemetry stop the business when the connection does. Backup configurations need designing rather than assuming. Automatic failover requires a router capable of holding two connections and switching between them without anybody intervening, and it should be tested by deliberately disconnecting the primary service and not left untested until the day it matters.
A backup nobody has ever proven is a hope rather than a plan. Commercial installations bring obligations a residential one does not. Work at height on a commercial building attracts full workplace safety requirements, roof access and fall prevention need arranging properly, and anybody attending is doing so under the duties that apply to the person controlling the workplace as well as their own. A contractor who arrives with a ladder and no plan for the roof is a liability and not a bargain.
Tenancy adds one further detail. A leased commercial premises will have provisions about alterations and make good, so mounting equipment to the roof or penetrating the building fabric needs the landlord's written consent and a clear position on removal at the end of the term. Settle that before installation begins. Workplace duties including work at height are administered by SafeWork NSW.
| Work | NSW 2026 | Note |
|---|---|---|
| Ground or pole mount | $260 - $580 | Rural blocks, no roof work |
| Roof mount, single storey | $420 - $950 | Includes flashed penetration |
| Roof mount, two storey | $650 - $1,650 | Access equipment required |
| Cable run and entry | $180 - $520 | Distance dependent |
| Ethernet point | $160 - $420 each | Cheaper during install |
| Shed or second building link | $650 - $3,200 | Fibre or wireless bridge |
Choosing an Installer
Satellite internet installation sits across several trades, which means the field ranges from antenna installers and electricians through to general handypeople, and the quality varies accordingly. Start by asking what they actually do, since somebody who installs antennas and data cabling weekly brings different experience from somebody adding it as a sideline, and the difference shows in the flashing and the cable work. Then ask the regulatory question directly. Where the job involves concealed cabling into a telecommunications network, ask which cabling registration they hold and whether the signed certificate comes with the invoice. That one question filters the field quickly and costs nothing to ask. Interrogate the roof work separately.
Ask how they intend to fix the mount, what it fixes into, how the penetration will be flashed and sealed, and what access equipment they are bringing. A roof is the most expensive part of a house to get wrong, and a leak traced to a satellite mount two winters later is both annoying and avoidable. Finish with the usual commercial checks. Confirm an ABN and a physical address, confirm public liability insurance with a sum appropriate to working on your roof, get the scope in writing including the obstruction assessment and the mounting method, and establish what happens if the chosen position turns out to be obstructed once tested. Disputes about workmanship or pricing can be taken to NSW Fair Trading.
| Ask This | A Good Answer | A Warning Sign |
|---|---|---|
| Do you hold cabler registration | Names the category | Has not heard of it |
| Will I get a cabling statement | Yes, with the invoice | Blank look |
| How is the mount fixed | Into structure, described | Into the sheeting |
| How is the penetration sealed | Flashed, not just sealant | Silicone mentioned first |
| Have you run an obstruction check | From the actual position | Assumes it will be fine |
| What access are you bringing | Suitable for the roof | Extension ladder only |
What to Look Out For
The costly mistake is accepting a mounting position because it is convenient for the installer rather than because it tested clear, which produces a connection that works during the site visit and drops out intermittently thereafter. Insist on an obstruction assessment from the actual position and height before anything is fixed. Let it run for longer than a few minutes, since the terminal builds a better picture of the sky over time and a quick check can miss a narrow blockage entirely. Be cautious about cable entries sealed with nothing but silicone, about mounts fixed through tiles or sheeting without landing in structure, and about anybody proposing to work on a two storey roof from a ladder. Watch for quotes that omit the cable run entirely, for mesh nodes sold without the cabling that makes them work properly, and for installers who cannot answer the registration question.
Be wary too of a price quoted over the phone without anybody seeing the property, as the roof and the sky view are what determine the work. Keep the documentation, meaning the written cabling compliance statement where cabling was done, photographs of the mount and the sealed penetration before anybody leaves, the obstruction report, and details of what was installed where. Those records matter for warranty, for insurance and for whoever works on the roof next. Photograph the penetration before it is covered, because once the flashing is in place nobody can verify what sits underneath it. Cabler registration categories are published by the ACMA, and the standard that statement certifies against by Standards Australia.
How to Get Comparable Quotes
Describe the property first, covering whether it is a house, unit, farm or business premises, how many storeys, what the roof is made of and whether the block is open or heavily treed. Say roughly where you want the dish and where the router needs to end up, since the distance between those two points drives a good part of the price. Mention the constraints up front. Note whether the property is strata, rented, heritage listed or within a conservation area, whether there is a shed or second building needing coverage, and whether power is mains, solar or generator.
Photographs of the roof and of the intended dish position help more than descriptions. Then ask each installer to price the same scope, with the mount type and fixing method, the cable run and entry detail, any ethernet points, router or mesh configuration and access equipment listed separately. Ask whether they hold cabler registration and whether the compliance statement is included. Existing television and antenna work is quoted through antenna installation contractors, with screens and mounting by TV wall mounting specialists.
Starlink Installation Across New South Wales
We connect you with satellite internet installers across New South Wales for homes, farms, businesses, sheds, studios and remote sites, covering obstruction assessment, roof and pole mounting, sealed cable entries, ethernet points and mesh network setup, from Sydney and the Central Coast through the Hunter, the Illawarra and the Blue Mountains, out to the Central West, the Riverina, New England, the North Coast and far western New South Wales.
▶ Sydney Inner City 18 areas
▶ Greater Sydney 25 areas
Western Sydney
South Western Sydney
Northern Sydney
The Hills District
Inner West
St George
▶ Sydney Coastal 23 areas
Northern Beaches
Eastern Suburbs
Harbour Suburbs
Sutherland Shire
▶ Hunter & Central Coast 19 areas
Central Coast
Hunter Valley
Port Stephens
▶ Illawarra & South Coast 18 areas
Illawarra
Shoalhaven
Sapphire Coast
▶ North Coast 19 areas
Mid North Coast
Coffs Coast
Northern Rivers
▶ Blue Mountains & Highlands 17 areas
Blue Mountains
Southern Highlands
▶ Regional NSW 21 areas
Central West
Riverina
New England
Far West
Starlink Installation FAQs - NSW 2026
What does Starlink installation cost in NSW?
Installation runs $260 to $580 for a simple ground or pole mount, $420 to $950 for a single storey roof mount and $650 to $1,650 where the roof is two storey or steep. Hardware and subscription are separate.
Can I install it myself?
The kit is built to be plugged in and plenty of people start there. Permanent mounting, anything penetrating a roof, and cabling buried in the building fabric are where an installer earns the fee.
Does the installer need a licence?
For concealed telecommunications cabling, yes. The installer needs a registration matching the scope, or supervision from somebody holding one, and the result must meet the national wiring rules.
What paperwork should I receive?
A signed statement confirming the cabling meets the wiring rules. You get a copy, the cabler retains one, and it may come as the standard advice form or as wording on your invoice.
How much clear sky does the dish need?
A broad cone, not a narrow line, as the terminal follows satellites across a wide arc. Anything clipping the edge produces short repeated dropouts, which is harder to live with than a clean failure.
Will trees be a problem?
Trees cause more trouble than anything else here, and they keep growing. Allow for how the canopy will look several years out, and test from the exact elevation the terminal will occupy.
Can I put it on a rental or a unit?
A rental needs the landlord to agree, as mounting and drilling alter the property. In strata, the roof and outer walls normally belong to the scheme, so the owners corporation decides.
Do I need council approval?
Usually not on a freestanding house. Heritage listings and conservation areas are the exception, and putting the dish out of sight from the street avoids most of the difficulty.
What happens in a blackout?
The connection stops, because the dish and router both need mains power. A modest uninterruptible supply covering both keeps a household online through the short outages that make up most interruptions.
Does rain affect it?
Heavy rain attenuates the signal briefly, and the practical effect across most of NSW is short reductions during intense downpours. Persistent trouble is nearly always obstruction rather than weather.
How do I get coverage to a shed?
Copper runs out around a hundred metres. Past that the options are fibre or a wireless link between buildings with clear line of sight, both of which are routine on rural blocks.
Is it worth wiring mesh nodes?
Yes where practical. Cabled nodes deliver roughly twice the usable throughput of ones relaying over the air, and pulling that cable during the original visit costs a fraction of doing it later.
Satellite, Antenna and Network Specialists - NSW
Related NSW Services
For Tradies - NSW
Are you a tradie? Browse current paid job leads on the NSW tradie job leads board, where homeowners, landlords and strata managers across Sydney and regional New South Wales post real projects. Satellite and network installation brings antenna installers, electricians and cablers onto the same jobs, so you can explore electrician jobs, data cabling jobs and handyman jobs in New South Wales, or see the full range of tradie job leads posted to The Quote Yard platform.
Need Starlink Installed in NSW?
Post your job and compare NSW installers on the obstruction assessment, how the mount is fixed and sealed, and whether they hold cabler registration.
Get Starlink Installation QuotesAbout This Guide
This page provides guidance information only and is not professional advice of any kind. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.
All NSW tradies are required to hold appropriate licences. Verify at NSW Fair Trading.
Indicative 2026 NSW estimates and installation only, excluding the Starlink hardware and subscription. Mount type, height, cable distance and roof access all move the price.