Looking for an Air Conditioning Installer in Perth?

Tell us your suburb, which rooms you want cooled or heated, whether the house has a tiled or metal roof, and whether there is an old evaporative unit on the roof now. Mention strata, a rental or a two storey home. We will pass that description to experienced installers across Perth, so every quote you receive prices the same job.

Get Free Air Conditioning Quotes

Perth Air Conditioning Price Guide

2.5kW wall split, supplied and installed$980 - $1,380
3.5kW wall split, supplied and installed$1,080 - $1,520
5kW wall split, supplied and installed$1,280 - $1,780
8 to 9kW wall split, supplied and installed$1,680 - $2,400
Multi-head system, two indoor units$2,200 - $3,800
Ducted reverse cycle, average home$12,000 - $20,000
Ducted evaporative cooler, new install$3,200 - $6,800
Evaporative unit replaced, ducts kept$2,400 - $4,800
Dedicated circuit for a new unit$280 - $750
Split system annual service$120 - $220

These are estimated Perth price ranges for 2027. Your price depends on the size and brand of the unit, the pipe length, how easy the roof space is to reach, and whether the switchboard needs work before a new circuit can be added.

Hire an Air Conditioning Installer Perth WA - Get Local Quotes

Perth homes are cooled in two quite different ways, and the choice affects every part of a quote. Many older Perth homes still have a ducted evaporative cooler on the roof, which pulls outside air through wet pads (soaked filters) and blows it through ducts to ceiling outlets. Refrigerated systems cool with a gas, like a fridge, from a wall split (one indoor unit piped to an outdoor unit) to whole house ducted reverse cycle, and also heat in winter. Western Australia divides the licences for this work between two trades. A refrigeration mechanic can hold a restricted electrical licence to disconnect and reconnect equipment, but not to install fixed wiring (permanent cabling). A new circuit or isolator switch, the outdoor shut-off beside the unit, needs a licensed electrician. Anyone handling refrigerant, the gas that carries heat, also needs a national licence. Outdoor units must meet night noise limits under the state noise regulations, which in most suburbs fall to 35 decibels from 10 pm. Strata lots have default by-laws, standard building rules, on items visible from outside, and tenants must ask in writing, as for any major modification, before an install. Homes built before 1990 may also hide asbestos cement sheeting where the pipes need to pass through. Prices on this page are 2027 estimates for normal working hours across the metro area, before switchboard upgrades or roof repairs. Post your job on The Quote Yard and we will connect you with experienced air conditioning installers around Perth who can quote on it.

Perth Air Conditioning Work Covered

Air conditioning work around Perth runs from a single bedroom split system in an apartment to a new ducted reverse cycle system replacing an old roof-top evaporative cooler. We can connect you with experienced installers who all price the same written description of your home.

Get Free Quotes

At a Glance - Perth Air Conditioning Prices, 2027 Estimates

Job Price Range How It Is Charged What Drives It In Perth Who Can Do It
2.5kW wall split $980 - $1,380 Supply and install Pipe length and wall type Installer with refrigerant licence
3.5kW wall split $1,080 - $1,520 Supply and install Brand and units back to back on one wall Installer with refrigerant licence
5kW wall split $1,280 - $1,780 Supply and install Room size and outdoor unit spot Installer with refrigerant licence
6 to 7kW wall split $1,450 - $2,100 Supply and install Circuit size and bracket Installer plus electrician
8 to 9kW wall split $1,680 - $2,400 Supply and install Dedicated circuit and access Installer plus electrician
Multi-head, two rooms $2,200 - $3,800 Supply and install Pipe lengths to each room Installer plus electrician
Ducted reverse cycle, small home $9,000 - $14,000 Fixed after site visit Roof space and zones (separately controlled areas) Air conditioning contractor
Ducted reverse cycle, average home $12,000 - $20,000 Fixed after site visit Outlets, zones and controller Air conditioning contractor
Ducted unit replaced, ducts kept $6,000 - $13,000 Fixed after inspection Duct condition and capacity Air conditioning contractor
Extra zone or zone motor $300 - $1,000 per zone Per zone Duct flap and controller Air conditioning contractor
Ducted evaporative, new install $3,200 - $6,800 Fixed after site visit Outlets and roof slope Evaporative installer
Evaporative unit replaced $2,400 - $4,800 Fixed per unit Reusing ducts and outlets Evaporative installer
Unit supplied by you, install only $600 - $1,500 Labour and materials Pipe kit and circuit Installer plus electrician
Electrical connection only $380 - $620 Fixed per unit Distance to switchboard Licensed electrician

What Pushes a Perth Air Conditioning Quote Up

What is involved
Pipe longer than the standard kit, which adds copper pipe, insulation and extra refrigerant gas by the metre.
A switchboard with no spare space or old fuses, which must be upgraded before a new circuit can go in.
Removal of an old evaporative unit from the roof, plus patching the roof sheeting or tiles where it sat.
Second storey wall brackets, outdoor units mounted on the roof and tight roof spaces that slow down every part of the job.
Quotes that only say supply and install can leave out the circuit, the isolator switch and old unit removal, so ask for each one to be listed on its own line.

Briefing an Air Conditioning Installer for a Perth Home

Most Perth installers can quote a simple wall split from photos, but anything larger needs a visit to the roof space and the switchboard. The quickest way to get useful prices is to write one short brief before you call anyone. List the rooms, their rough size, which way the main living area faces and how many people use each space. Say whether you want cooling only or heating as well, because that alone separates evaporative coolers from reverse cycle systems. The range of systems on offer is set out under air conditioning installation across WA. A single room job is covered in more depth under split system installation, including the sizes most often fitted to bedrooms and living areas.

A good brief also records what is already on the house, since existing equipment changes both the method and the price. Note any old roof-top cooler, existing ceiling outlets, the age of the switchboard and whether the roof is tiled or metal sheeting. Strata owners should add the name of the strata manager, and tenants should say clearly that the home is rented. Photos of the outside walls where an outdoor unit could sit save repeated phone calls later. With that information in hand, every installer is pricing the same house rather than guessing at different versions of it. If you already have a preferred brand or a quiet model in mind, mention it so that each quote starts from the same unit.

Perth Install Prices by System, 2027 Estimates

Wall split systems make up most home jobs, and their price rises gently with capacity, the cooling output measured in kilowatts or kW. A 2.5kW unit for a small bedroom is commonly quoted between $980 and $1,380, while a 3.5kW unit sits between $1,080 and $1,520. Larger 8 to 9kW units for open plan living areas run from $1,680 to $2,400, partly because they usually need their own circuit back to the switchboard. A multi-head system, with two indoor units running off one outdoor unit, is usually priced between $2,200 and $3,800. Ducted reverse cycle systems, using hidden ducts to every room, start around $9,000 for a small home and run to $20,000 for an average family home, as set out under ducted air conditioning installation. A replacement split that reuses existing pipes in good condition is cheaper again, at about $680 to $1,200 for the new unit fitted.

Evaporative cooling costs noticeably less for the first install on a typical house. A new ducted evaporative system with ceiling outlets is estimated at $3,200 to $6,800, and replacing an old unit while keeping the existing ducts costs $2,400 to $4,800. Running costs, water use and winter covers are compared under evaporative cooling in WA, which also lists prices for new pads, the wet filter panels, and pumps. All of these amounts are 2027 estimates for a standard single storey home, and a site visit can move them in either direction.

Job Perth Range How It Is Charged What Moves It
3.5kW wall split $1,080 - $1,520 Supply and install Brand and pipe length
5kW wall split $1,280 - $1,780 Supply and install Wall type and bracket height
6 to 7kW wall split $1,450 - $2,100 Supply and install Circuit and switchboard space
Replacement split, pipes reused $680 - $1,200 Fixed per unit Condition of the old pipework
Multi-head, two indoor units $2,200 - $3,800 Supply and install Pipe runs to each room
Ducted reverse cycle, large home $18,000 - $35,000+ Fixed after site visit Zones, outlets and three phase power
Extra ceiling outlet, evaporative $180 - $420 each Per outlet Ceiling height and duct length
Winter cover, evaporative $120 - $320 Supplied and fitted Roof access
Dedicated circuit $280 - $750 Fixed per circuit Distance to the switchboard
Ducted system service $250 - $480 Per visit Number of zones
Install only, unit supplied by you $600 - $1,500 Labour and materials Pipe kit and circuit
Evaporative pad set replaced $180 - $480 Per full set Pad type and roof access
Evaporative water pump replaced $180 - $420 Supplied and fitted Pump model
Evaporative seasonal service $130 - $240 Per visit Unit size and pad condition
Chemical coil clean (cooling fins washed), split system $180 - $380 Per unit How dirty the coil is

How a Perth Installer Builds Up a Fixed Price

Air conditioning installers in Perth rarely charge by the hour for a new system. Instead, they quote a fixed price made up of the unit itself, a standard installation, and extras added after looking at the house. A standard installation usually assumes the indoor and outdoor units sit back to back on the same wall. It also assumes a short pipe run and an outdoor unit that sits on the ground rather than on a bracket. Any change from that layout usually appears as a separate line on the quote. Knowing what counts as standard makes it far easier to see why two prices for the same brand differ.

Common extras include additional copper pipe by the metre, a wall bracket for an upper floor and a condensate pump to lift the water the unit produces where it cannot drain by gravity. Plastic ducting to cover pipes on the outside wall is another frequent extra. Electrical work is often quoted separately, because the new circuit and isolator switch, the on and off switch beside the outdoor unit, must be done by a licensed electrician rather than the refrigeration mechanic. If the switchboard has old ceramic fuses or no spare space, an upgrade may be needed first, which is explained under switchboard upgrades. Removal of an old unit and safe recovery of its refrigerant can also be listed on its own line. Asking for each of these to be priced separately protects you from surprises on installation day.

For ducted work, the price is built around a design rather than a list of extras. The contractor works out the capacity, the number and position of outlets, the zones (groups of rooms switched on separately) and the controller, and then prices that layout as one job. Ask for the design to be written down with the outlet locations and the zone names. That document lets you check that every other quote covers the same number of rooms, outlets and zones before you compare the totals.

Reading a Perth Install Quote

$1,080 to $1,520, for a 3.5kW wall split supplied and installed in a standard position
Line on the quote
What it usually covers
Unit
Indoor and outdoor unit, with model numbers
Standard install
Back to back position and a short pipe run
Extras
Extra pipe, brackets, pumps and covers
Electrical
Circuit, isolator and safety certificate

The model number on the quote should match the indoor and outdoor units delivered on the day.

Extras priced per metre or per item are much easier to compare than one combined figure.

If the electrical work is excluded, get the electrician to quote before you accept the air conditioning price.

Perth Housing Types and Where Units Are Fitted

The age and style of a Perth house affects where the units can go, how the pipes reach them and how long the installation takes. Double brick homes make up much of the middle suburbs, and drilling a pipe hole through two layers of brick takes longer than going through a framed wall. Many of these houses also carry an evaporative cooler that may be removed, which leaves an opening in the roof to be closed. Newer homes in new housing estates often have a concrete slab floor, a low sloping roof and a narrow gap down the side. That narrow gap can make it hard to place an outdoor unit away from the neighbour while keeping a clear path down the side of the house. Corner blocks and rear lanes sometimes offer a better position, so walk around the house before the site visit.

Apartments and townhouses closer to the city bring different questions, such as balcony space, shared walls, lift bookings and strata approval. Two storey homes in coastal and riverside suburbs may need an upper floor bracket or a long pipe run down to the ground. In hills suburbs, roof spaces and access can be tighter, which affects ducted work in particular. Outdoor units beside a side boundary often end up near the dividing fence, so see hiring a fencer in Perth for what to agree with a neighbour before it is replaced. Leaving a gap between the unit and the fence also makes later servicing easier. Thinking about the house type early helps you ask the right questions at the site visit.

Area Typical Homes Common Install Price Factor
Stirling, Bayswater and Morley Older double brick houses Ducted refit replacing an old cooler Roof patching and brick drilling
Joondalup, Wanneroo and Alkimos Newer slab homes on small lots Ducted reverse cycle or splits Narrow side setbacks
Subiaco, Mount Lawley and Victoria Park Character homes and apartments Wall splits and multi-heads Strata rules and long pipe runs
Applecross, Melville and Cottesloe Two storey homes Splits on upper floors Brackets and access
Cockburn, Rockingham and Baldivis Estate homes and townhouses Splits and small ducted systems Travel and estate design rules
Kalamunda, Armadale and Midland Larger lots and hills homes Ducted evaporative or reverse cycle Roof slope and access
Ellenbrook, Swan View and Midvale Estate homes and older houses Splits and ducted refits Distance from the city
Perth city and East Perth High rise apartments Balcony splits Strata approval and lift access

Evaporative Coolers and Refrigerated Systems Side by Side

An evaporative cooler works by drawing outside air through pads kept wet by a small pump inside the roof-top cabinet. The air loses heat as the water evaporates and is then blown through ducts to ceiling outlets around the house. Because it brings in a constant stream of fresh air, some windows or doors need to stay partly open so that air can escape. It uses water as well as electricity, and the pads, pump and water supply need regular checks, usually before the first use of the season and again when the unit is covered for winter.

A refrigerated system moves heat with a refrigerant, a gas sealed inside pipes, instead of water. The indoor unit cools the air already in the room and sends the heat outside through the outdoor unit, so the windows stay closed. Most units sold for homes are reverse cycle, which means the same unit also heats the room in winter. Split systems serve one room each, while ducted reverse cycle systems use a single outdoor unit for the whole house. The way reverse cycle works is explained further under reverse cycle air conditioning. Both types need a licensed person for any new electrical connection, but only refrigerated systems need a refrigerant licence for the gas side of the work.

The choice is partly about cost, partly about how the house is used and partly about what is already there. Replacing an evaporative unit that feeds existing ducts is the cheapest route to cooling a whole house. A ducted reverse cycle system costs more to install but can also replace a separate heater. Some households keep an evaporative cooler for the living areas and add split systems to the bedrooms. Others remove the roof unit entirely, and the old outlets are then either reused or closed off. Writing down which rooms matter most at night and during the day helps an installer suggest the right mix.

Evaporative ducts are larger than the ducts used for refrigerated systems, so they are rarely reused. Installers usually remove the old ducting, patch the ceiling at each outlet and run new insulated ducts. That extra work should be priced as its own line, together with closing the roof opening. If the old ducts are left in place, ask who removes them later and what happens to the ceiling outlets. A clear answer avoids paying twice for work in the same roof space.

Two Ways to Cool a Perth Home

Two system types cover most cooling installs in Perth houses
System
What it means for you
Ducted evaporative
Fresh air through wet pads, windows partly open
Wall split, reverse cycle
One room cooled and heated, windows closed
Ducted reverse cycle
Whole house, zones and one outdoor unit
Mixed approach
Evaporative for living areas, splits for bedrooms
Switching from evaporative to refrigerated usually means new ducts, so ask for old duct removal to be priced separately.

Restricted Electrical Licences and the Isolator Rule

Western Australia lets refrigeration and air conditioning mechanics hold a restricted electrical licence, a limited licence issued by the Electrical Licensing Board. According to the licence description on the WA Government website, that licence covers disconnecting and reconnecting equipment and finding faults in its power and control circuits. It does not allow the holder to install or alter fixed wiring, the permanent cabling in a home, such as a new circuit run from the switchboard to the outdoor unit. Building and Energy, the state regulator, has prosecuted a business whose staff fitted isolator switches and interconnecting wiring, the cable between the indoor and outdoor units, under restricted licences. The regulator said that this work can only be done by a licensed electrical worker. In practice, a new split system on a new circuit needs an electrician as well as the refrigeration mechanic.

The refrigerant side of the job is licensed under a national scheme rather than by the state. A person who handles refrigerant needs a refrigerant handling licence, a personal licence, and the business needs a refrigerant trading authorisation to buy, store and dispose of refrigerant. Both can be checked through the Australian Refrigeration Council on its licence register, ARCtick. A split system job therefore often involves two people, or one person holding two sets of licences. Licence numbers for electrical contractor businesses begin with EC, and numbers for individual electricians begin with EW. A written quote should name who does each part and the licence each person holds.

Task Licence Needed Issued By What to Ask For
Mounting units and running refrigerant pipe Refrigerant handling licence Australian Refrigeration Council Licence number of the technician
Buying and storing refrigerant Refrigerant trading authorisation Australian Refrigeration Council Authorisation number of the business
Reconnecting a like-for-like unit Restricted electrical licence Electrical Licensing Board Licence card showing the scope
New circuit or isolator switch Electrical worker licence, EW Electrical Licensing Board Name of the electrician
Certifying the wiring Electrical contractor licence, EC Electrical Licensing Board Electrical Safety Certificate
Recovering refrigerant from an old unit Refrigerant handling licence Australian Refrigeration Council Where the recovered gas goes
Fault finding on control circuits Restricted electrical licence Electrical Licensing Board Scope printed on the licence

The Electrical Safety Certificate and Its 28 Day Deadline

When new wiring is installed, the licensed electrical contractor must give you a copy of an Electrical Safety Certificate within 28 days of finishing the work. The certificate records that the work was completed, checked and tested, and only a licensed contractor can issue it. Maintenance and like-for-like replacement of equipment do not need one, which is why a straight swap of a unit in the same position on the same circuit may arrive without a certificate. Keep the certificate with the warranty card and the installation invoice, ideally in the same folder as any strata or landlord approval.

If the certificate has not arrived after 28 days, the first step is to ask the electrical contractor for it. Building and Energy advises that if it is still not provided, you can tell the network operator, the business running the power lines, which for most of Perth is Western Power on 13 13 51. Contractor licences can be checked on the Building and Energy electrical safety website or through the ServiceWA app. A missing certificate is also a useful warning sign that the wiring may have been done by someone without the right licence. An electrical safety inspection can check the circuit if you have doubts about an earlier install. That inspection is also worth booking when you buy a home that already has several units fitted.

Insurers and buyers sometimes ask for proof that electrical work was done properly. A certificate kept in the house file answers that question quickly and without a second inspection. Landlords and strata managers may also ask for a copy after an install. Asking for the certificate to be emailed on the day of completion saves chasing it weeks later. A simple folder for every air conditioning document makes the next sale or warranty claim easier.

Paperwork to Keep After the Install

Document
Why it matters
Electrical Safety Certificate
Proof the new wiring was tested by a contractor
Tax invoice
Shows the model, price and date for warranty claims
Warranty registration
Some makers ask for it within a set time
Commissioning (start-up test) record
Pressures and settings checked on the day
Strata or landlord approval
Shows the install was agreed in writing
Ask the contractor for the certificate by email, and contact Western Power if it has not arrived after 28 days.

Other Trades a Perth Install Can Call On

Air conditioning work often involves other parts of the house, so it helps to know who does what. A licensed electrician handles the circuit, the isolator and any switchboard work, and pricing for those jobs is set out under hiring an electrician in Perth. A plumber may be called if the drain for water from the unit needs to connect to a waste pipe or if an evaporative cooler needs a new water line. Roof plumbers patch the roof after an old cooler is removed, and a carpenter may build a bulkhead (boxed-in ceiling section) for a return air grille, the vent that draws air back to the unit. A painter may be needed to touch up ceilings once old outlets are patched. Asking the installer which of these trades are included avoids gaps between them.

Pests in the roof space can hold up ducted work, because installers spend hours in that space and may refuse to enter if rodents or wasps are present. Prices for roof and subfloor treatments before trades go in are set out under hiring a pest controller in Perth. Trees and large shrubs close to the planned outdoor unit can block airflow or drop leaves into it, and pruning and council tree rules are covered under hiring an arborist in Perth. If you plan to move house soon, a split system can be taken down by a licensed technician who recovers the refrigerant first. A unit moved without that step can lose its charge and may not be covered by the maker's warranty. Coordinating those trades early keeps the installation day short.

Who Does Which Part

Work
Who usually does it
Refrigerant pipe and units
Technician with a refrigerant handling licence
New circuit and isolator
Licensed electrician working for a contractor
Drain water from the unit to a waste pipe
Licensed plumber
Roof patch after cooler removal
Roof plumber or roofer
Bulkhead for a return air grille
Carpenter or ceiling fixer
Ask the installer to say in writing which of these trades are included, and who arranges them.

Makers, Model Ranges and Picking a Capacity

Most installers in Perth carry several brands, and the model you choose matters as much as the price, because it sets the noise level, the controls and the warranty terms. Daikin makes wall split systems including the Alira X and Zena ranges, which are sold in several capacities for bedrooms and living areas. Mitsubishi Electric makes wall mounted, floor console (low, floor standing), bulkhead and ducted units for homes. Mitsubishi Heavy Industries makes the Ciara series of split systems along with ducted and multi split systems, so one maker can often cover a whole house in stages.

Ducted and evaporative systems come from a slightly different mix of makers. ActronAir makes ducted reverse cycle systems such as the Advance, AIRES and ASPIRE ranges, with NEO controls that offer individual zoning. Seeley International makes Breezair and Coolair evaporative coolers, as well as Braemar reverse cycle systems. Bonaire makes ducted evaporative coolers along with portable and commercial evaporative units. Brivis makes evaporative cooling systems, and its name often appears on older roof units that are being replaced. Samsung makes ducted split systems, wall splits and 360 cassette units for ceilings.

Panasonic makes multi room systems that can run up to four indoor units from a single outdoor unit. LG makes split, multi split (multi-head) and ducted systems for homes. Toshiba makes single split, multi split and inverter (variable speed) ducted systems. Hisense makes the Air Q series of reverse cycle split systems, including a 5.1kW model. Haier makes Super Match multi split systems and Smart Power ducted systems. Clipsal makes weatherproof switches in its Weathershield range, which electricians may use near outdoor equipment.

Maker Products Typical Use Ask About
Daikin Alira X and Zena wall splits Bedrooms and living areas Capacity in kW
ActronAir Advance, AIRES and ASPIRE ducted Whole house Zones and NEO controls
Seeley International Breezair and Coolair evaporative Roof-top cooling Pad type and outlets
Mitsubishi Heavy Industries Ciara series splits Single rooms Indoor unit size
Haier Super Match multi splits Two to four rooms Number of indoor units
Toshiba Inverter ducted systems Whole house Return air grille position
Mitsubishi Electric Floor console and bulkhead units Rooms with little wall space Mounting height
Panasonic Multi room systems Up to four indoor units Outdoor unit size
Bonaire Ducted evaporative coolers Roof-top cooling Outlet count
Hisense Air Q reverse cycle splits Single rooms Capacity in kW

Ducted Retrofits Under Perth Tiled and Metal Roofs

Fitting a ducted reverse cycle system into an existing house means working in the roof space for a day or more. Installers need enough height to move ducts, a safe path along the ceiling joists, the timber beams, and a spot for the indoor unit that can be serviced later. Low pitched metal roofs on newer homes can leave little room, which slows the job and may limit where the indoor unit and its service access can sit. Older tiled roofs often give more space but may hide old wiring, dust and insulation that has to be moved. A site visit is the only way to see these things, so treat a ducted price given without one as a rough guide.

Insulation affects how well the new system performs, and ducted work is a good time to check it. Insulation batts moved during the install should be put back properly, and filling gaps is covered under ceiling and wall insulation. The outdoor unit for a ducted system is larger than a split system outdoor unit and needs a level pad with clear air around it. Larger systems may also need three phase power, a heavier supply used for big motors, which is a question for the electrician. Ask the contractor to show the planned outlet, return air grille and controller positions on a simple floor plan. Keep that plan, because it helps the next technician find the zone motors and filters.

Planning a Ducted Retrofit

Item
What to plan for
Roof space
Height and access for the indoor unit
Return air grille
Central position, often in a hallway
Zones
Living areas and bedrooms on separate zones
Outdoor unit
Level pad with clear air on all sides
Insulation
Batts put back after the ducts are laid
Old evaporative outlets need closing and patching, so check whether the ceiling repair is in the price.

Default Strata By-Laws and Outdoor Units

Strata lots in Perth are run under the Strata Titles Act 1985, and the by-laws, or building rules, registered for each scheme apply to every owner and occupier. The default conduct by-laws, which apply unless a scheme changes them, ban anything visible from outside that does not suit the building, unless the strata company (all owners together) consents in writing. An outdoor unit on a balcony, a front wall or a shared roof can fall within that rule, depending on how visible it is. The current text of the Act is available on the WA legislation website.

Another default by-law requires the owner to give the strata company written notice at least 14 days before altering the structure of the lot. Pipes and cables that pass through common property, the parts all owners share, such as an external wall or a shared roof, usually need the strata company to approve the work before it begins. Schemes may have added their own by-laws on unit colour, position or noise screening, so read the registered by-laws rather than relying on a general rule. Strata approval is needed in addition to any other approvals the work may need, not instead of them. A disagreement with the strata company can go to the State Administrative Tribunal (SAT), which hears WA disputes, after earlier steps fail. Landgate, the WA land titles agency, publishes a strata living guide that explains the default by-laws in plain terms.

The simplest approach is to send the strata manager a short request with the unit model, its size, a photo of the proposed position and the route of the pipes. Include the installer's business name and their licence numbers in that request. Wait for written approval before paying a deposit, since a refusal after the unit is ordered can be costly. Keep the approval with your lot records, because a buyer may ask for it later. If the scheme has a preferred position for outdoor units, ask installers to quote for that position.

Step Who Acts Timing Keep a Copy Of
Read the registered by-laws Lot owner Before getting quotes By-law list
Written request with photos Lot owner Before ordering the unit Request and plans
Notice of a structural change Lot owner At least 14 days before work Notice sent
Consent for visible items Strata company Before installation Written consent
Common property approval Strata company Before pipes pass through Approval minutes
Dispute State Administrative Tribunal After earlier steps fail All correspondence
Check scheme by-laws on screening Lot owner Before choosing a position Registered by-laws

The 35 Decibel Night Limit for Outdoor Units

Noise from an air conditioner in WA is controlled by the Environmental Protection (Noise) Regulations 1997. Local council guidance explains that an outdoor unit must meet the assigned noise levels, the legal limits for each area, at all times. From 10 pm the allowed level in most suburban areas is 35 decibels, the unit for loudness. That lowest level applies until 7 am from Monday to Saturday and until 9 am on Sundays and public holidays. A unit with a steady hum or whine, called tonal noise, is treated more strictly, because 5 decibels are taken off the allowed level. Under the Environmental Protection Act 1986, a person who installs equipment that makes unreasonable noise can be fined.

Choosing the position is the main way to stay within these limits, and it costs nothing extra when it is planned before the install. Council guides suggest keeping units as far as possible from neighbours, away from bedrooms and outdoor living areas, and often facing the rear yard. A side setback close to the neighbour's bedroom window is usually the position most likely to cause complaints at night. If a unit already causes trouble, the owner may have to move it or fit a sound-blocking enclosure designed with help from an acoustic consultant. Councils investigate complaints through an environmental health officer, a council staff member who deals with noise, who may ask the neighbour to keep a two week noise log. Talking to the neighbour before the install, and showing them the planned position, often prevents a complaint altogether.

Night Hours for Outdoor Units

35 decibels allowed from 10 pm in most suburban areas, measured at the neighbour
Period
Assigned level
Monday to Saturday, 7 am to 7 pm
Highest level
Every night from 10 pm
Lowest level
Sundays and public holidays
Lowest level until 9 am
Tonal noise
Five decibels taken off
Ask the installer for the outdoor unit sound level from the maker's data before agreeing on a position near a boundary.

Renting in Perth and the Form 27 Request

Tenants in WA cannot simply book an installer, because an air conditioner counts as a major modification, a lasting change to the home, under the rental rules. Consumer Protection WA names air conditioners as an example of that kind of change, alongside items such as dishwashers and pet doors. The tenant asks the landlord in writing using Form 27, the official request form, and the landlord has 28 days to reply. Including the model, the proposed position of both units and the installer licence details in the request helps the landlord decide quickly and with confidence.

This process is different from minor changes such as picture hooks, which follow a shorter 14 day process on Form 26. Landlords who agree to a major modification may set conditions, such as who pays, who owns the unit at the end of the tenancy and who services it. Those terms should be written down and signed by both parties before any work starts. Landlords installing a system themselves should give the usual notice before tradespeople attend the home. A tenant who leaves can only take a unit with them if the landlord agreed to that in writing. Any removal still needs a licensed technician to recover the refrigerant.

Situation Who Asks Form or Notice Reply Time
Tenant wants a split system Tenant Form 27, major modification 28 days
Tenant wants a picture hook Tenant Form 26, minor modification 14 days
Landlord wants a change made Landlord Form 28 28 days for the tenant
Landlord installs a new unit Landlord Entry notice to the tenant As set by the lease rules
Unit removed at end of tenancy Tenant Written agreement Before the bond inspection
Unit breaks during the tenancy Tenant Repair request Depends on the repair type
Tenant takes an agreed unit away Tenant Removal by a licensed technician Before the final inspection
Landlord replaces an old cooler Landlord Entry notice and agreed dates Before work starts

Pre-1990 Homes, Asbestos and Pipe Holes in Walls

HealthyWA, the state health website, advises that a home built before 1990 is likely to contain asbestos in some building products. Eaves linings (sheets under the roof overhang), wall cladding and wall or ceiling sheets in bathrooms and laundries are common places to find it. Drilling a pipe hole through asbestos cement sheeting can release fibres, so installers need to know before they start. Guidance is available from the WA Department of Health. If you are not sure, an asbestos test of the sheet in question gives a clear answer. Testing usually costs far less than halting work on installation day while someone else checks the material.

If the sheet does contain asbestos, the installer may suggest another route for the pipes, such as through brick or a window frame. HealthyWA recommends a licensed asbestos removal contractor for any removal work, as explained under asbestos removal. Old evaporative units on pre-1990 roofs may sit on or near asbestos cement roofing, which changes how the removal is planned and who should do it. Ask the installer to note on the quote whether they have checked for asbestos, and what they will do if suspect sheeting is found. That small note can stop the job being halted on the day. Where the outdoor unit would otherwise mount on a fibro (asbestos cement) wall, a ground stand or a brick pier can avoid fixing into the sheet at all.

Where Possible Issue What to Do Who Can Help
Eaves lining Asbestos cement sheet Test before drilling Asbestos assessor
External wall cladding Fibro sheeting Route pipes through brick if possible Installer
Wet area ceilings Asbestos cement sheet Avoid cutting outlets there Licensed removalist
Old roof-top cooler Roof sheeting under the unit Inspect before removal Roofer
Old switchboard Backing board material Ask the electrician to assess Licensed electrician
Laundry wall sheeting Asbestos cement sheet Test before drilling Asbestos assessor
Area around the roof hatch Old sheeting and dust Check before the crew climbs in Installer

Faults, Consumer Guarantees and WA Complaint Paths

New air conditioners come with a maker's warranty, but the Australian Consumer Law gives separate rights that apply whatever the warranty says. Goods must be of acceptable quality and services must be done with proper care and skill, as explained by the ACCC. A unit that leaks water, trips the circuit or fails to cool soon after installation may be an installation fault rather than a product fault. Write to the business first, set out the problem clearly and ask for a repair, replacement or refund within a reasonable time. Photos and the installation date make that letter far stronger.

If the business does not respond, Consumer Protection WA can help with complaints about goods and services, including helping both sides reach an agreement. Concerns about electrical work can be raised with Building and Energy, and refrigerant handling concerns with the Australian Refrigeration Council. A follow-up visit for air conditioning repairs by another business can also give you an independent written opinion on whether the fault lies with the unit or the installation. Regular air conditioning servicing helps show the system was looked after if a warranty claim is made later, so keep each service report with the original installation paperwork.

What to Look Out For Before Signing a Perth Quote

A good quote reads like a plain description of the job you are paying for, not just a single price at the bottom. It names the unit by model number, says where the indoor and outdoor units will sit, and lists the pipe length included. It says who does the electrical work, which licence that person holds, and whether the safety certificate is included. It also explains how the old unit and its refrigerant will be dealt with. Finally, it gives a start date and says how long the price stays open. A quote that reads this way is also much easier to hold the business to if something goes wrong later.

Warning signs are easier to spot once you know what should be there. A price that seems low may leave out the circuit, the isolator or the pipe cover, which then appear as extras on the day. A quote that lists only a capacity in kilowatts, without a model, makes comparison almost impossible. A business that cannot give licence numbers for both the refrigerant and the electrical work should not be engaged for the job. Be wary of large deposits for a single split system that is held in stock. If the job is in a strata lot or a rental, wait for written approval before paying anything.

Gaps and Warning Signs

What is involved
The indoor and outdoor unit model numbers written in full.
The standard pipe length, and the price per metre beyond it.
Circuit, isolator and safety certificate included or clearly excluded.
Old unit removal and refrigerant recovery listed as a separate line.
The outdoor unit position marked, with distance to the boundary.
Licence numbers for the refrigerant and electrical work.

A price for a large unit with no mention of a new circuit or switchboard check.

A deposit request before strata or landlord approval has been given.

If a quote leaves out the electrical side, do not assume it will be done for free on the day.

Getting Like-for-Like Air Conditioning Quotes in Perth

Quotes can only be compared fairly when every business gets the same brief. Send each installer the room list, photos and notes about the roof, the switchboard and any strata or rental rules. Ask each to quote a named model or a small number of named models, so that brand and capacity are the same across quotes. Request the standard pipe length and the cost of each extra metre. Ask whether the price includes the electrical work, the safety certificate and the removal of the old unit. Two or three quotes on that basis are usually enough to see a fair price.

Booking ahead often gives more choice of installation dates, and it leaves time for any strata, landlord or switchboard work to be sorted out first. For a ducted system, ask for a site visit and a written design with outlet positions and zones. If you are moving soon, packing and transport are covered under hiring a removalist in Perth, while the split system itself should be removed by a licensed technician. Comparing quotes on the same model, position and extras shows which business offers the best value rather than simply the lowest headline price.

Once a quote is accepted, confirm the installation date, the expected finish time and who will be on site in writing. Make sure the power can be switched off for part of the day and that the roof space is clear of stored boxes. On completion, ask the installer to show you how to use the controller and clean the filters. Check that the outdoor unit sits where it was agreed, that it is level, and that the pipes are covered and the wall hole is sealed. Keep every document together for the life of the system. Register the warranty with the maker too, if it asks for registration within a set time after installation.

Air Conditioning Installers Across Perth

We connect households across the Perth metro area with experienced air conditioning installers, from apartments near the city to family homes in the outer suburbs.

▶ Perth 28 areas
Perth CBD Joondalup Wanneroo Butler Alkimos Stirling Scarborough Hillarys Karrinyup Morley Bayswater Bassendean Belmont Victoria Park South Perth Melville Applecross Canning Vale Willetton Cannington Fremantle Cockburn Rockingham Baldivis Gosnells Armadale Byford Ellenbrook
▶ Mandurah & Peel 20 areas
Mandurah Halls Head Dawesville Falcon Erskine Silver Sands Madora Bay San Remo Greenfields Meadow Springs Lakelands Coodanup Pinjarra Ravenswood Waroona Dwellingup North Dandalup Serpentine Jarrahdale Boddington
▶ Bunbury & South West 24 areas
Bunbury Australind Eaton Dalyellup Gelorup Capel Busselton Vasse Dunsborough Yallingup Margaret River Cowaramup Augusta Harvey Brunswick Junction Collie Donnybrook Balingup Nannup Bridgetown Boyup Brook Manjimup Pemberton Northcliffe
▶ Swan Valley & Perth Hills 24 areas
Guildford Midland Herne Hill Middle Swan West Swan Upper Swan Caversham Baskerville Henley Brook Swan View Helena Valley Kalamunda Gooseberry Hill Lesmurdie Walliston Carmel Pickering Brook Mundaring Glen Forrest Darlington Parkerville Chidlow Roleystone Bedfordale
▶ Avon Valley & Wheatbelt 22 areas
Northam York Toodyay Beverley Bakers Hill Clackline Wundowie Goomalling Dowerin Wongan Hills Cunderdin Tammin Kellerberrin Merredin Wyalkatchem Trayning Nungarin Quairading Brookton Corrigin Bruce Rock Narrogin

Perth Air Conditioning Installer FAQ

Can the technician who mounts my split system also wire the new circuit?
Only if that person also holds a full electrical licence and works for a licensed electrical contractor. A restricted electrical licence for refrigeration mechanics covers disconnecting and reconnecting equipment, not new fixed wiring. Building and Energy has said that isolator switches and interconnecting wiring need a licensed electrical worker. Ask the installer to name who will do the wiring before you accept the quote.
How soon should I receive the Electrical Safety Certificate?
The electrical contractor must give you a copy within 28 days of finishing installing work. Like-for-like replacement of equipment does not need one, so a straight unit swap may not come with a certificate. If it is missing after 28 days, ask the contractor first. If it still does not arrive, contact Western Power on 13 13 51.
What time does my outdoor unit need to be quiet at night?
The lowest assigned noise level applies from 10 pm until 7 am from Monday to Saturday. On Sundays and public holidays it runs until 9 am. Council guidance gives 35 decibels as the usual night limit in suburban areas, measured at the neighbouring property. A unit with a steady hum or whine, called tonal noise, is treated more strictly.
Do I need strata approval for a balcony split system?
Usually yes, because the default by-laws require written consent for items visible from outside that do not suit the building. Pipes through common property walls also need the strata company to agree. Some schemes have extra by-laws about colour, position or screening. Send a written request with photos and wait for approval before paying a deposit.
Can a tenant in Perth arrange an air conditioner install?
A tenant can ask, but an air conditioner is a major modification and needs the landlord's written permission. The request is made on Form 27, and the landlord has 28 days to reply. The agreement should say who pays, who owns the unit and who services it. Without that permission, the tenant should not book an installer.
Is it cheaper to replace an old evaporative cooler with another one?
Replacing an evaporative unit and reusing the existing ducts is usually the cheapest route to whole house cooling. Estimates for that job run from $2,400 to $4,800 in 2027. Moving to ducted reverse cycle costs more because new ducts and outlets are needed. That system also heats, which can replace a separate heater.
What should I check if my house was built before 1990?
HealthyWA advises that homes built before 1990 are likely to contain asbestos in some products. Eaves linings and wall cladding are common places where installers might drill. Ask for the material to be tested before any hole is made. If it contains asbestos, the pipe route can often be moved to brick or a window frame.
How do I check an installer's refrigerant licence?
Ask for the refrigerant handling licence number of the technician and the trading authorisation number of the business. Both can be checked through the Australian Refrigeration Council on its ARCtick licence register. The licence should be current on the day of the job. A business that will not share these numbers is best avoided.
Why do two quotes for the same size unit differ so much?
The unit may be a different brand or model even when the capacity matches. One quote may include extra pipe, a circuit or old unit removal while the other leaves them out. A higher wall bracket or a longer route to the outdoor unit also adds cost. Ask both businesses to price the same named model in the same position.
Who removes my old unit and its refrigerant?
The refrigerant must be recovered by a technician with a refrigerant handling licence before the unit is taken away. Many installers include removal as a separate line on the quote. Roof patching after an old evaporative unit is removed may be extra. Check that the quote says what happens to the old unit and the roof opening.

Perth Air Conditioning Specialists

For Trades & Contractors - WA

Are you a refrigeration mechanic, air conditioning installer or electrician working around Perth? Join The Quote Yard to receive local job requests from households that have already described their rooms, roof and switchboard, so you can price the work accurately.

Compare Perth Air Conditioning Quotes

Describe your rooms, roof and switchboard once, and we will pass the same details to experienced air conditioning installers across Perth so you can compare quotes that price the same job.

Get Free Air Conditioning Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

Service availability may vary in regional WA. Verify licences at WA Building and Energy.
Prices are 2027 estimates based on typical Perth air conditioning installation rates. Your final price will depend on the system, the length of pipe, roof access and any electrical work, so compare written quotes that name the model and list the unit, labour and wiring separately.
Need work done? Get free quotes. Post a Job – It's Free