Looking for a Fencer in Perth?

Tell us your suburb, the length and height of fence you need, the material you prefer, whether a neighbour shares the cost and whether the old fence is fibro. We will pass that description to experienced fencers across the metro area, so every quote you receive is based on the same details.

Get Free Fencing Quotes

Perth Fencing Price Guide

Colorbond boundary fence, 1.8 m$75 - $135 per m
Treated pine paling fence$85 - $160 per m
Hardwood paling fence$140 - $240 per m
Aluminium slat or louvre fence$180 - $380 per m
Limestone or rendered block wall$380 - $900+ per m
Pedestrian gate, Colorbond or timber$350 - $850
Manual swing driveway gate$1,200 - $3,500
Automated sliding gate$3,500 - $8,500+
Frameless glass pool fence$550 - $1,100 per m
Asbestos fence removal$1,500 - $5,000

These are 2027 estimates for typical Perth fencing work. Your price depends on the length and height of the fence, the ground under the posts, whether an old fence or fibro panels must be removed, and whether a permit or engineer is needed.

Hire a Fencer Perth WA - Get Local Quotes

Fencing in Perth depends as much on council rules and deals with neighbours as on posts and sheeting. Most Perth boundary fences are shared under the Dividing Fences Act 1961, and each council's local law, its own set of rules, describes the standard fence a neighbour can be asked to help pay for. Coastal suburbs add dune sand and limestone close to the surface, which changes how deep posts go and how long fittings last. Front fences follow separate rules, with solid sections usually limited to 1.2 metres and a clear view kept for drivers beside driveways. Many older homes still have corrugated fibre cement fences that may contain asbestos, which brings health rules into a simple replacement. New estates on the northern and southern fringes add vacant lots next door, developer design guidelines and neighbours who have not moved in yet. Councils inspect pool barriers, the fencing that keeps children out of a pool area, at least every four years, and a boundary fence used as one must meet stricter heights. Councils such as Stirling, Joondalup, Vincent and Cockburn each publish their own fencing rules, so the same fence can be fine in one suburb and need approval in the next. Fencing is not a licensed trade in WA, but a home fencing contract worth $7,500 or more falls under the Home Building Contracts Act 1991. Our prices are 2027 estimates for normal working hours across the metro area. Post your job on The Quote Yard and we will connect you with experienced Perth fencers who can quote on it.

Perth Fencing Work Covered

Fencing across the Perth metro area runs from a single replaced Colorbond sheet to a full boundary rebuild shared with a neighbour, new front fences, driveway gates and pool barriers. We can connect you with experienced fencers who all price the same written description of your job.

Get Free Quotes

At a Glance - Perth Fencing Prices, 2027 Estimates

Job Price Range How It Is Charged What Drives It In Perth Who Can Do It
Colorbond boundary fence, 1.8 m $75 - $135 per m Per metre of fence Old fence removal and footings Fencer
Treated pine paling fence $85 - $160 per m Per metre of fence Timber grade and height Fencer or carpenter
Hardwood paling fence $140 - $240 per m Per metre of fence Species and post spacing Fencer or carpenter
Aluminium slat or louvre fence $180 - $380 per m Per metre of fence Slat width and gaps Fencer
Tubular steel fence $160 - $320 per m Per metre of fence Panel height and coating Fencer
Limestone or rendered block wall $380 - $900+ per m Per metre of wall Footings, piers and permit Bricklayer or wall builder
Single Colorbond sheet replaced $90 - $220 Per sheet Colour match and access Fencer or handyman
Leaning post reset $180 - $420 Per post Sand, roots and old concrete Fencer
Pedestrian gate, Colorbond or timber $350 - $850 Fixed per gate Width and hardware Fencer
Manual swing driveway gate $1,200 - $3,500 Fixed per gate Width, leaves and posts Fencer or gate installer
Automated sliding gate $3,500 - $8,500+ Fixed after site visit Track, motor and power Gate installer and electrician
Frameless glass pool fence $550 - $1,100 per m Per metre of barrier Glass posts and drilling into concrete Pool fencer
Pool barrier pre-inspection check $150 - $350 Per visit Barrier length and gates Pool fencer
Asbestos fence removal $1,500 - $5,000 Fixed per job Length, condition and disposal Licensed asbestos removalist

What Pushes a Perth Fencing Bill Up

What is involved
Old fences have to come out before new posts go in. Fibro panels that may contain asbestos add licensed removal and approved disposal to the bill.
Sand and limestone change how posts are set. Loose coastal sand needs deeper footings, the concrete bases that hold the posts, while rock close to the surface may need drilling or breaking out.
Height above 1.8 metres brings extra steps and costs. A building permit, written neighbour consent and sometimes an engineer can add weeks and fees.
Front fences carry their own set of council rules. Solid sections, see-through panels, piers (brick or stone columns) and driveway sight lines can all change the design and the price.
Ask every fencer to list removal, disposal, posts, sheeting, gates and concrete on separate lines, and to name the product and colour in writing.

Where a Perth Fence Job Really Starts

Perth fencers typically charge $75 to $135 per metre to supply and install a standard 1.8 metre Colorbond boundary fence, and most jobs are quoted as a fixed price after a site visit. That price usually bundles removal of the old fence with posts, concrete, sheeting and the capping strip along the top, so two quotes for the same fence can look very different line by line. Fencing is not a licensed trade in WA, which leaves the written quote, the contract and the fencer's insurance as your main protections. For materials, lifespans and the basic cost sharing rules between neighbours, see the WA fencing guide, while the advice here covers hiring, council rules and paperwork. Getting those right helps you agree the job with your neighbour, brief the right fencer and avoid a fence the council later asks you to change.

The most useful thing to settle before calling anyone is whether the fence is shared, because that decides who signs the quote and who pays. A boundary fence between two homes is usually split equally, but a front fence or a privacy screen, a taller screen just inside your own lot, is normally yours alone. Write down the length of each run, the height you want and the material you prefer, and take photos from both sides if the neighbour agrees to let you in. A fencer who receives that brief can tell you quickly whether a permit, an engineer or an asbestos removalist is likely to be needed.

Perth Fence and Gate Estimates for 2027

Colorbond steel is the most common boundary fence material in Perth, and a 1.8 metre run typically costs $75 to $135 per metre supplied and installed. BlueScope makes COLORBOND steel in Australia, the coated steel used in most sheet fences across the metro area. Lysaght makes NEETASCREEN, SMARTASCREEN and SLATSCREEN steel fencing and screening from that coated steel. Treated pine paling fences usually cost $85 to $160 per metre, while hardwood palings run at $140 to $240 per metre depending on the species and post spacing. Aluminium slat and louvre fences, popular for front yards and courtyards, typically cost $180 to $380 per metre. Limestone and rendered block walls start at about $380 per metre and can pass $900 once footings, piers and capping are included.

Smaller jobs are often priced per item rather than per metre, which makes repair quotes easier to compare. Replacing a single Colorbond sheet usually costs $90 to $220, and resetting a leaning post costs $180 to $420 depending on how far the footing has moved. A full 20 metre fence replacement across the metro area typically lands between $2,400 and $6,500. Repair work is described in more detail in fence repairs, including how to tell when a run is worth saving.

Job Perth Range How It Is Charged What Moves It
Colorbond fence, 1.8 m $75 - $135 per m Per metre Removal and footings
Treated pine paling fence $85 - $160 per m Per metre Timber grade and height
Hardwood paling fence $140 - $240 per m Per metre Species and post spacing
Aluminium slat or louvre fence $180 - $380 per m Per metre Slat width and gaps
Rendered blockwork wall $420 - $750 per m Per metre Footings and render
Single Colorbond sheet replaced $90 - $220 Per sheet Colour match
Post replaced and concreted $220 - $480 Per post Access and old footing
Timber palings replaced $55 - $130 per m Per metre Paling count and rot
Gate repaired or rehung $180 - $450 Per gate Hinges, latch and post
Full 20 metre replacement $2,400 - $6,500 Fixed per job Material and removal

Metre Rates, Extras and Small Repair Prices

Most Perth fencers quote boundary fences by the metre, with gates, removal and extra height added as separate items. Removal of an old Colorbond or timber fence is often included, but fibro panels that may contain asbestos are usually priced separately or left to a licensed removalist. Sloping blocks add cost because the panels must be stepped in level sections or raked to follow the ground, and a fence on top of a limestone retaining wall may need longer posts or brackets. Austral Masonry makes concrete posts with fence brackets, which some fencers use where timber or steel posts would sit in damp ground. New fences and gates built together are compared in fence and gate installation, which explains post setting and gate types.

Height is one of the quickest ways to raise a fencing price. A standard sheet fence is 1.8 metres, and going higher usually means longer posts, extra rails and a building permit that some fencers arrange for a fee. A lattice or slat extension along the top of an existing fence also adds to the material cost and may still need council approval. Midland Brick makes clay bricks, pavers and masonry blocks, and brick piers between steel panels push the price toward the upper end of the range. Each of those choices should appear as its own line, so you can drop one without the whole quote changing.

Treated pine posts and palings should be described on the quote by their treatment level, which shows how well the timber resists rot and insects, not just as treated timber. Koppers makes wood preservatives and treated wood poles, and the treatment details should appear on the supplier's delivery docket. Timber fences close to garden beds can attract termites, and hiring a pest controller in Perth explains inspections and treatment around a home. A separate termite inspection is worth booking if old fence posts crumble at ground level when the fencer pulls them out.

Reading a Perth Fencing Quote

$75 to $135, per metre for a 1.8 metre Colorbond boundary fence, supplied and installed
Line on the quote
What it usually covers
Removal
Old sheets, posts and footings taken away
Posts and footings
Post type, depth and concrete
Sheeting or palings
Product, colour and height
Gates and hardware
Hinges, latch and drop bolt

Asbestos removal should appear as its own line, with a licensed removalist named.

A stepped or raked fence on a slope should be described in writing.

Tie the final payment to a finished fence you have inspected from both sides, not to a date on the calendar.

Coastal, Established and New Estate Suburbs

Prices for the same fence vary across Perth because the ground, the old fence and the access all change from suburb to suburb. Coastal suburbs such as Scarborough, Cottesloe and Hillarys sit on dune sand with limestone close to the surface, and salt air shortens the life of cheaper fittings. Established suburbs such as Morley, Bayswater and Maylands have older fences, mature trees and narrow side access, so removal takes longer. Newer estates in the northern and southern growth areas often have builder's rubble along the boundary and neighbours who have not yet settled in. Our WA repair pricing shows a full 20 metre replacement at roughly $3,200 to $6,500 near the coast, compared with $2,400 to $5,200 in the northern and southern suburbs.

Hills suburbs have sloping blocks and bushfire rules, which are covered in the bushfire section of the WA fencing guide linked above. Mount Lawley, Menora and Inglewood fall within a City of Stirling heritage protection area, where every street fence needs development approval, the council's planning permission. Corner lots across the metro area face extra rules about visibility near intersections and driveways, explained further down this page. Ask each fencer which suburbs they work in regularly, since a business based across the city may add travel time to the price. Fencers who know your council area are also more likely to have built under its local law before.

Area Typical Fence Common Job 20 m Replacement
Coastal suburbs, Hillarys to Cottesloe Colorbond with limestone piers Replacing corroded sheets and rails $3,200 - $6,500
Inner and older suburbs Timber, fibro and brick Replacing ageing fibro or palings $2,900 - $6,000
Northern and southern growth areas New Colorbond boundary fences First fences beside vacant lots $2,400 - $5,200
Mount Lawley, Menora and Inglewood Character front fences Street fences needing approval Priced on quote
Corner lots across the metro area Front and side fences Fences trimmed back near intersections Priced on quote

No Fencing Licence, but Home Building Contract Rules Apply

WA has no licence for fencers, and Building and Energy, the state building regulator, does not require builder registration for fences. It lists a fence as an incidental structure, a minor structure outside those rules, so even a fence worth more than $20,000 that needs a permit can be built without a registered builder. That makes checking a fencer different from checking a plumber or electrician, because there is no licence number to search. Ask instead for an Australian Business Number (ABN), a current public liability certificate and the addresses of finished jobs you can look at. A fencer who also builds masonry walls may hold builder registration, which is worth knowing for a combined fence and wall job.

The Home Building Contracts Act 1991 lists fencing as associated work, meaning it is covered like home building, so a home fencing contract worth $7,500 to $500,000 falls under it. The contract must be in writing, and section 10 limits any deposit to 6.5 per cent of the contract price. Later payments should match work already done or materials already delivered, such as posts set and sheets stacked on site. A shared boundary fence is often paid in two stages, with a small deposit and the rest paid on completion. Ask for an invoice that names both neighbours if the cost is being shared, so each owner has a record of their half. The full Act is published on the WA legislation website.

Under the same Act, a variation, meaning any change to the agreed work, must be in writing, set out its cost and be signed by both parties before the extra work starts. Variations on fence jobs usually come from hidden problems, such as old concrete footings, limestone under the surface or a boundary in an unexpected place. A fair quote explains in advance how those discoveries will be priced, for example per post or per hour. If a fencer asks for more money after the job without a signed variation, you are entitled to question the extra charge.

Work below $7,500 sits outside that Act, but the Australian Consumer Law still requires services to be supplied with due care and skill. Complaints about services that fall short can go to Consumer Protection, and Consumer Protection WA explains how to lodge one. Keep the quote, your messages and photos of the finished fence until it has been through a full winter. Steel fences should come with the maker's product warranty, and the fencer should tell you which conditions apply near the coast. A fence that leans within its first year often points to shallow footings, which is a workmanship issue rather than a product fault.

What Protects You on a Perth Fence Job

6.5 per cent maximum deposit on a home fencing contract worth $7,500 to $500,000
Protection
When it applies
Written contract
Fencing at a home worth $7,500 or more
6.5 per cent deposit limit
Same contracts, before work starts
Signed variations
Any change to price or scope
Due care and skill
Every job, under consumer law
Check that the business name on the quote matches the ABN and the public liability certificate you are given.

Fence Heights, Permits and Privacy Screens

Perth councils apply state building rules that let a fence other than masonry reach 1.8 metres without a building permit, and a masonry fence 0.75 metres. The City of Joondalup and the City of Stirling both say a dividing fence, the shared boundary fence, over 1.8 metres needs the neighbour's agreement and may need a permit. Joondalup treats a privacy screen as a separate fence set at least 100 millimetres inside the dividing fence. A privacy screen there that rises more than 2.3 metres above natural ground level needs a development application, which is the council's planning approval. The City of Vincent accepts a variation application, with a fee, for a fence that does not meet its fencing local law. Masonry walls usually need a structural engineer's drawing for footings and piers, and hiring a bricklayer in Perth covers brick and block work.

Councils do not all use the same local law, so the rules for your street depend on where you live. The City of Cockburn adopted a new Fencing Local Law in 2026, while Stirling's local law dates from 2008 and Joondalup amended its law in 2021. New estates often add developer design guidelines or a local development plan, a planning document for the estate, which can control fence materials and colours along the street. Cockburn also suggests a Landgate title search, a check of the state's official land record, because a restrictive covenant, a condition registered on the title, can set fencing rules of its own. Ask the fencer to confirm which documents they have checked before the materials are ordered.

When a permit is needed, the application is usually lodged by the owner or by the fencer on the owner's behalf. The City of Vincent's checklist for a fence permit asks for a site plan at 1:200, side-view drawings called elevations at 1:100 and construction details of posts, piers and footings. It also asks for a structural engineer's certification of the footing and pier details. Allow for that paperwork in the timeline, because posts and panels should not be ordered until the permit is issued.

Fence Building Permit Other Approval Keep a Copy Of
Non-masonry dividing fence up to 1.8 m Generally exempt Neighbour agreement under the Act Signed fence agreement
Dividing fence over 1.8 m May be needed Written neighbour consent Consent and permit
Masonry fence over 0.75 m Needed Engineer's footing detail Permit and drawings
Joondalup privacy screen over 2.3 m Check with the council Development application Planning approval
Street fence in a Stirling heritage area Depends on design Development approval Approval letter
Fence outside the local law Variation needed Council variation application Council decision

Front Fences, See-Through Panels and Driveway Sight Lines

Front fences in Perth are controlled mainly through the Residential Design Codes, the state planning rules for homes, and council policies. The City of Stirling allows solid sections up to 1.2 metres in the primary street setback area, the ground between the street and the house, and anything above that visually permeable up to 1.8 metres. Visually permeable means continuous gaps of at least 50 millimetres covering at least a third of the surface, or narrower gaps covering at least half. Stirling also limits piers to 400 by 400 millimetres, and a masonry street wall over 0.75 metres needs a building permit. The setback area depends on the density coding, the R number showing how densely the area can be built, ranging from 7.5 metres on R10 lots down to 1 metre on R80 lots.

Front fences most often break the rules in the sight line areas beside driveways, where drivers need a clear view. In Stirling, any part of a fence inside a vehicle sight line area, including posts and piers, must stay at or below 750 millimetres. Vincent and Cockburn both ask for a 1.5 by 1.5 metre truncation, a corner cut back so drivers can see, beside a driveway where the fence is higher than 0.75 metres. On corner lots without a standard street truncation, both councils limit a front fence to 0.75 metres within a 6 by 6 metre corner area. Cockburn also requires the whole fence, including footings, to sit inside the lot boundary rather than on the verge, the council strip beside the road. A fencer who has not measured these areas on site cannot give you a reliable front fence price.

Vincent does not allow barbed wire or electric fencing in residential areas, and its permit drawings must show gates swinging inward. Aluminium slat, tubular steel and brick with steel panels between the piers are the usual ways to meet the visually permeable rule above 1.2 metres. Austral Bricks makes face bricks, the kind left on show, for low front walls and piers in many Perth streets. Ask for an elevation drawing, a side view of the finished fence, showing the solid height, the see-through section and the piers before you sign.

Front Fence Checks Before Ordering

Rule
Example from a Perth council
Solid section
Up to 1.2 m in Stirling
Overall height
Up to 1.8 m with a see-through top
Driveway sight line
750 mm limit in Stirling
Corner lots
6 by 6 m area in Vincent and Cockburn
Council front fence rules are reviewed from time to time, so check the current version for your lot.

Council Standards for a Sufficient Fence

Under the Dividing Fences Act 1961, a neighbour can only be asked to pay half of a sufficient fence, the standard fence described in a local law or agreed between the owners. The City of Joondalup's local law describes a sufficient fence as corrugated fibre reinforced cement or steel sheeting, 1.8 metres high. Its sheets must go into the ground by at least 25 per cent of their length and no less than 600 millimetres. Each sheet must be one piece for the full height and depth, overlapped with the next and finished with clip-on capping along the top. If you want something better, such as slats or a masonry wall, you can only claim half the cost of a sufficient fence unless the neighbour agrees in writing. The WA Government website has a guide to dividing fences with sample letters for neighbours.

The WA fencing guide above summarises the cost sharing rules and the notice process, where one owner sends the other a written fence or repair notice before work. What matters when hiring is that the quote matches your council's definition, so the neighbour has no fair reason to refuse their half. Ask the fencer to state how deep the sheets go into the ground and the post spacing on the quote, because those details are what a sufficient fence is measured against. The City of Stirling does not administer the Act, but it funds a mediation service through the Citizens Advice Bureau for residents who cannot agree. Neighbours who still cannot agree can apply to the Magistrates Court, which can decide the fence type, each owner's share and the timeframe.

A Sufficient Fence in Joondalup

Item
Local law standard
Material
Fibre cement or steel sheeting
Height
1800 mm from natural ground
Depth in the ground
At least 25 per cent and 600 mm
Finish
Single sheets, lapped and capped
Other councils describe their own sufficient fence, so ask for the local law that applies to your street.

Vacant Lots, Unknown Owners and Council Reserves

New estates on Perth's fringes often leave a new homeowner fencing beside a lot that is still empty. Under the Act, you cannot recover half the cost from the owner of vacant land unless they agree or a court orders it. Once that owner completes a substantial building on the lot or lets someone occupy one, you can give written notice claiming half the value of the fence. That value is worked out at the date of the claim, so an older fence may be worth less than you paid. The neighbour then has one month to dispute the claim in writing, and unresolved claims go to the Magistrates Court. Notifying the vacant lot owner before you build is not required, but it is recommended and makes the later claim easier.

Sometimes the owner next door cannot be found at all. The WA Government advises contacting the Magistrates Court before building, and the court may authorise the fence if you show you have made reasonable efforts to find the owner. Your council's rates team or Landgate may help identify the owner. When the owner is found, you can request half the value of the fence as at the date you notified them. Keep every letter, receipt and photo, because the claim may be made years after the fencer has left.

Fences beside parks, laneways (narrow back lanes), paths and other land used for public purposes, such as council reserves, follow a different rule. The Crown, meaning the state as landowner, and local government need not contribute when their land is used for public purposes, and the City of Stirling says the adjoining owner pays the full cost. Some councils have their own policies for fences along public open space, covering materials, colours and visibility, so ask before you order. Quotes for these fences should be addressed to you alone, with no neighbour's share shown.

Situation Who Pays What to Keep Time Limit
Neighbour's lot is vacant You, until they build Invoice and photos of the finished fence Claim once a building is complete
Vacant lot now built on Half claimed from the owner Written claim notice One month for them to dispute
Owner cannot be found You first, half claimed later Record of your enquiries Contact the court before building
Fence beside a park or laneway You, in full Council correspondence Check council policy first
Neighbour disputes the fence type Decided by agreement or the court Notice and quotes 21 days to apply to the court

Fences in Strata and Survey-Strata Complexes

Villas and townhouses on strata titles have their own fencing rules under the Strata Titles Act 1985, which sets up a strata company made of all the owners. For the Dividing Fences Act, the strata company is generally treated as the owner of the whole block of land, so the outside boundary of a built strata scheme is its responsibility. In a survey-strata scheme, where each owner holds their own block of land, the lot owner is treated as the owner where their lot meets land outside the scheme. Fences between survey-strata lots fall under the Dividing Fences Act as if they were neighbouring blocks, subject to the scheme by-laws, the complex's own rules. Single tier strata schemes, where no lot sits above another, are treated as survey-strata schemes for these fencing sections of the Act.

That means the first question in a strata complex is who should hire the fencer. A fence on common property, the shared land owned through the strata company, should be ordered and paid for by the strata company, not by one owner. Fences between two lots in a survey-strata complex are usually arranged between those two owners, unless the by-laws say otherwise. Check the scheme by-laws and the strata plan before signing, and ask the strata manager whether the owners need to vote on it. Fencers working in strata complexes should address the quote to the right owner or the strata company, with the lot number or common property area named. A quote addressed to the wrong owner can leave you paying for a fence that was never your responsibility.

Who Orders the Fence in a Strata Scheme

Fence
Usually arranged by
Outside boundary of a built strata scheme
Strata company
Survey-strata lot to outside land
Lot owner
Between two survey-strata lots
The two lot owners, subject to by-laws
Common property
Strata company
Read the scheme by-laws before ordering, because they can change who pays for fencing inside the complex.

Trees, Roots and Storm Damage Along Perth Boundaries

Trees are a common reason for a Perth fence to lean, crack or fall. Roots lift footings and push panels out of line, while branches dropped in a storm can flatten a whole run. The Act leaves overhanging branches, roots growing across the boundary and tree damage as private disputes between neighbours, which the Magistrates Court can decide. If a tree has to be pruned or removed before a new fence goes in, hiring an arborist in Perth explains council tree rules and qualified tree work. Ask the fencer to set new posts clear of large roots rather than cutting through them.

When a fence is damaged or destroyed by flood, fire, lightning, storm or another natural accident, either owner can repair it straight away without notice. The owner who pays for that repair can then recover half the cost from the neighbour. There is one exception, which applies when fire or a falling tree caused the damage and the adjoining owner's neglect is clear. In that case the neglectful owner must pay for the repair alone, which is why a record of earlier warnings about a dead or leaning tree matters.

Home insurance may cover storm damage to a fence, so check your policy before booking a repair. Insurers usually want photos and a written quote, and a fencer who lists removal, posts and sheets separately makes that claim easier. A temporary barrier may be needed first if a pool or a dog is involved, because the gap cannot wait for the insurer. Cement Australia makes Post Set Concrete, a bagged mix for setting fence posts, and the quote should say which concrete is used. Photos of the tree, the fence and any earlier complaints about the tree help settle who was at fault. Keep the fencer's invoice with the insurance file in case the neighbour's share is later disputed.

Cause Who Pays Notice Needed Good to Know
Storm, flood, fire or lightning Shared equally None for an urgent repair Recover half after the work
Falling tree with evident neglect The neglectful owner Written claim Photos of the tree help
Roots lifting the fence Repairs usually shared Written notice for repairs Tree disputes can go to court
Other damage Shared equally Written notice, 14 days to object Agreement in writing helps

When the Council Can Act on an Old Fibro Fence

Many older Perth homes still have corrugated fibre cement fences that may contain asbestos. Health WA guidance says replacement is normally only mandatory when a fence is badly broken or leaning and at risk of collapse. Council environmental health officers have powers under the Health (Asbestos) Regulations 1992 and can issue directions, written orders to make a fence safe, about one that poses a public health risk. They usually become involved only when there is significant concern or neighbours cannot agree. The WA Government's dividing fences guide adds that repairs to an asbestos cement fence, the older fibro type made with asbestos, must use non-asbestos fencing. Old panels must never be reused, and Health WA publishes guidance for householders on asbestos at home.

The City of Stirling says removing more than 10 square metres of asbestos needs a licensed contractor, which you can check on the WorkSafe WA website. Removal typically costs $1,500 to $5,000 for a residential fence, and asbestos removal explains each step. Panels must be wetted, taken out whole without power tools, double wrapped in labelled plastic and taken to a facility licensed to accept asbestos. Never use a high pressure cleaner on an old fibro fence, because the water releases and spreads fibres. A sample can be tested first through asbestos testing and inspection if you are not sure what the panels contain.

Health WA's guidance encourages neighbours to negotiate a shared replacement rather than leave a failing fibro fence in place. Building a second fence on your own side of an asbestos fence is possible, but the guidance says it is best avoided because it does not solve the problem. The same guidance recommends at least three detailed quotes from asbestos professionals before choosing one. A combined price covering licensed removal and the new fence keeps both neighbours working from one set of figures.

Old Fibro Fence Checks

10 m² of bonded asbestos, such as fibro sheeting, is the point where a licensed removalist is needed
Step
What Health WA advises
Condition
Replace badly leaning or broken panels
Repairs
Use non-asbestos replacement panels
Cleaning
No high pressure water or power tools
Disposal
Double wrapped and taken to a licensed site
Talk to your neighbour before removal, since an old fibro dividing fence is usually a shared replacement.

Boundary Fences That Form Part of a Pool Barrier

Pools, spas and portable pools holding more than 30 centimetres of water need a safety barrier in WA. Local governments must inspect each barrier at least every four years, and new barriers within 30 days of the council learning the pool is finished. The periodic inspection charge is typically included in the annual rates notice rather than billed separately. Councils inspected almost 58,000 pools across WA in 2025-26, a record, according to the state government's October 2026 update. That update named Stirling, Rockingham and Karratha as holding half of all overdue inspections, and all three have since completed or planned them. Barrier measurements and the most common failures are explained in pool fencing.

A boundary fence often becomes part of a pool barrier, which changes what the fencer has to build. The City of Stirling says such a fence must be at least 1.8 metres high on the pool side, with a 900 millimetre non-climbable zone, free of footholds, measured down from the top. Horizontal rails, raised bases called plinths and climbable lattice on the pool side can break that zone, so the fencer needs to know about the pool before quoting. A front fence that forms part of a pool barrier in Cockburn must also be 1.8 metres high, and it needs planning approval above 1.2 metres. D&D Technologies makes Magna-Latch magnetic gate latches, which are fitted to many pool gates. New barriers are compared in pool fencing installation, and failed inspections in pool fence repairs and compliance.

Pools installed before 1 May 2016 may keep barriers built to the 1993 version of the barrier standard, apart from its rules on child-resistant doors. Outdoor pools generally cannot rely on child-resistant doors as part of the barrier unless they were approved or installed before 5 November 2001. Ask the council which standard applies before an old fence that forms part of an older pool barrier is replaced. The WA Government stresses that barriers are child-resistant rather than child proof, so adult supervision remains the main protection.

Item What the Rules Say Where It Applies Good to Know
Pools deeper than 30 cm Barrier required Across the Perth metro area Includes portable pools
Periodic inspection At least every four years Every Perth council Charge usually on rates
New barrier Inspected within 30 days After the council is told Reinspections can be charged
Non-compliant barrier Reinspected within 60 days City of Stirling Fix faults before the visit
Boundary fence as barrier 1.8 m with 900 mm zone inside City of Stirling guidance No climbable rails on the pool side
Gate latches At least 1500 mm above ground City of Stirling checks Pre-check costs $150 - $350
Pools installed before 1 May 2016 May use the 1993 standard Older pools Child-resistant doors are limited

Driveway Gates, Motors and the Electrician

Driveway gates are priced separately from the fence, and the type of gate makes a large difference to the total. A manual swing driveway gate typically costs $1,200 to $3,500, while an automated sliding gate with a motor and track runs from about $3,500 to $8,500 or more. Sliding gates need a clear run along the inside of the fence, and swing gates need room to open inward without hitting cars or the driveway slope. The City of Vincent asks permit drawings to show gates swinging inward, which keeps them off the footpath. Automatic Technology makes automatic gate openers for homes, and the fencer should name the motor and its warranty on the quote.

A gate motor needs power, and any new 240 volt outlet or cable to the gate must be installed by a licensed electrician. If the fencer does not work with one, hiring an electrician in Perth covers what that work involves. Cabling should go in before any driveway concrete or paving, and hiring a concreter in Perth helps with gate tracks and footings. Ask how the gate opens during a power cut, whether a battery backup is included in the price and how many remote controls come with it. More gate types are compared in automatic and driveway gate installation, including intercoms and remote controls. A gate that is installed before the power is ready often sits unused for weeks.

Gate Perth Range Opens Watch For
Pedestrian gate, Colorbond or timber $350 - $850 Swing Drop bolt and latch height
Pedestrian gate, aluminium slat or tubular $650 - $1,800 Swing Matching the fence panels
Manual swing driveway gate $1,200 - $3,500 Swing Room to open inward
Automated single swing gate $2,800 - $5,500 Swing Motor and power supply
Automated double swing gate $3,800 - $7,500 Swing Slope of the driveway
Automated sliding gate $3,500 - $8,500+ Slides Clear run inside the fence
Intercom or access control $450 - $2,200 Add-on Wiring before concrete

Work Hours, Buried Services and Access Through Next Door

Post hole drills, concrete mixers and steel saws are noisy, and the Environmental Protection (Noise) Regulations 1997 set the hours for that kind of work. The City of Stirling explains that construction noise is exempt from the usual limits between 7am and 7pm, Monday to Saturday. Work on Sundays and public holidays is not permitted, apart from quiet tasks such as painting. Before any digging starts, a free enquiry through Before You Dig Australia (BYDA) shows the cables and pipes recorded along the boundary. Private lines, such as sprinkler (reticulation) pipes or garden lighting cables, are not on those plans, so point them out to the fencer.

A crew replacing a shared fence needs to work on both sides, so agree access with the neighbour in writing before the start date. Pets, children and pool gates need extra care, because the old fence comes down before the new one goes up. Air conditioning outdoor units along side boundaries can block post holes, and hiring an air conditioning installer in Perth covers moving an outdoor unit. Owners moving into a new home often want fencing finished before the furniture arrives, and hiring a removalist in Perth helps plan that timing. A fencer's public liability insurance pays for damage to the neighbour's property, so ask for the certificate before work starts. Tell the neighbour where the crew will park and where the old sheets will be stacked.

What to Look Out For in a Perth Fencer's Quote

Check what a fence quote leaves out before comparing the totals. A boundary fence quote should name the product, profile, colour, height, length and post spacing, and say whether the old fence is removed. It should also state the footing depth, the concrete used and how stepped or raked panels will be handled on a slope. A front fence quote should show the solid height, the see-through section, the pier sizes and any council approval needed. Pool barrier work should say which standard the barrier is built to and who will deal with the council inspection.

Some warning signs come up again and again in Perth fencing. A quote that ignores fibro panels, or offers to break them up and bin them, is skipping asbestos rules that protect you and the neighbour. A fence over 1.8 metres or a masonry fence over 0.75 metres priced with no mention of a permit leaves that risk with you. Any deposit above 6.5 per cent on a home fencing contract of $7,500 or more breaks the Home Building Contracts Act.

Gaps and Warning Signs

What is involved
Product, profile, colour and height named in writing for every run.
Old fence removal and disposal shown as separate priced lines on the quote.
Fibro panels tested or handled by a licensed asbestos removalist.
Footing depth, post spacing and concrete type stated on the quote.
Permit, engineer and neighbour consent confirmed for fences above 1.8 metres.
Pool side of any barrier fence kept clear of climbable rails and plinths.

A deposit far above 6.5 per cent on a home fencing contract of $7,500 or more.

An offer to remove old fibro panels with power tools or a pressure cleaner.

A Perth fence quote far below the others usually leaves out removal, asbestos handling, gates or the cost of a permit.

Getting Perth Fence Quotes Two Neighbours Can Agree On

A shared fence goes most smoothly when both neighbours see the same quotes. Agree the material, colour, height and line of the fence first, then ask two or three fencers to price exactly that. Give each one the length of each run, photos from both sides, the location of any survey pegs and a note about fibro panels, trees and pools. If the boundary position is in doubt, a licensed land surveyor can mark it before anyone digs, and the cost can be shared. Ask each fencer how long the price holds, when they can start and how many days the old fence will be down.

Paint and stain choices matter for timber fences, steel gates and masonry piers. Cabot's makes Deck & Exterior Stain and Timbercolour paint for exterior timber. Dulux makes Weathershield exterior paint and Metalshield paint for metal surfaces. Wattyl makes Solagard exterior paint and Killrust metal coatings. Haymes makes exterior paints and a metal protection range for outdoor surfaces. A quote that names the coating and the number of coats lets both neighbours compare like with like.

Keep the signed agreement with your neighbour, the quote, the invoice and any permit together in one place. If a pool is involved, keep the record of the council barrier inspection as well, since a future buyer may ask for it. Garden beds, paving and reticulation along a new fence are easier to plan at the same time, and hiring a landscaper in Perth covers that work. Fences on top of retaining walls are explained in boundary and shared retaining walls. A dated photo record of the finished fence from both sides makes any later claim much simpler to settle.

Fencers Across Perth

Fencing prices on this page apply across the Perth metro area. Most suburbs carry no travel charge, while semi-rural lots on the fringes and long fence runs may be quoted differently.

▶ Perth 28 areas
Perth CBD Joondalup Wanneroo Butler Alkimos Stirling Scarborough Hillarys Karrinyup Morley Bayswater Bassendean Belmont Victoria Park South Perth Melville Applecross Canning Vale Willetton Cannington Fremantle Cockburn Rockingham Baldivis Gosnells Armadale Byford Ellenbrook
▶ Mandurah & Peel 20 areas
Mandurah Halls Head Dawesville Falcon Erskine Silver Sands Madora Bay San Remo Greenfields Meadow Springs Lakelands Coodanup Pinjarra Ravenswood Waroona Dwellingup North Dandalup Serpentine Jarrahdale Boddington
▶ Bunbury & South West 24 areas
Bunbury Australind Eaton Dalyellup Gelorup Capel Busselton Vasse Dunsborough Yallingup Margaret River Cowaramup Augusta Harvey Brunswick Junction Collie Donnybrook Balingup Nannup Bridgetown Boyup Brook Manjimup Pemberton Northcliffe
▶ Swan Valley & Perth Hills 24 areas
Guildford Midland Herne Hill Middle Swan West Swan Upper Swan Caversham Baskerville Henley Brook Swan View Helena Valley Kalamunda Gooseberry Hill Lesmurdie Walliston Carmel Pickering Brook Mundaring Glen Forrest Darlington Parkerville Chidlow Roleystone Bedfordale
▶ Avon Valley & Wheatbelt 22 areas
Northam York Toodyay Beverley Bakers Hill Clackline Wundowie Goomalling Dowerin Wongan Hills Cunderdin Tammin Kellerberrin Merredin Wyalkatchem Trayning Nungarin Quairading Brookton Corrigin Bruce Rock Narrogin

Perth Fencer FAQ

Can I claim half the fence cost from a neighbour whose lot is still vacant?
Not straight away, unless the owner agrees in writing or a court orders it. Under the Dividing Fences Act 1961, a claim becomes possible once the owner completes a substantial building or lets someone occupy one. You then give written notice claiming half the value of the fence at the date of the claim. The owner has one month to dispute it, and the Magistrates Court decides any claim that stays unresolved.
Who pays for a fence beside a park or laneway in Stirling?
The adjoining homeowner usually pays the full cost, because the Crown and local government do not contribute for land used for public purposes. The City of Stirling lists roads, rights of way, paths and reserves in its care as examples. Some councils have their own policies for fences beside public open space. Check with your council before ordering, and have the quote addressed to you alone.
Can I put a privacy screen above my boundary fence in Joondalup?
The City of Joondalup treats a privacy screen as a fence set at least 100 millimetres inside the dividing fence. A screen that rises more than 2.3 metres above natural ground level needs a development application. Raising the dividing fence itself above 1.8 metres needs the neighbour's written consent and a building permit. Ask the fencer to draw the screen's position and height before the council is approached.
How tall can a solid front fence be in Perth?
In the City of Stirling, solid sections in the primary street setback area can reach 1.2 metres. Anything above that must be visually permeable, up to an overall height of 1.8 metres. Fences inside a driveway sight line area must stay at or below 750 millimetres, including piers and posts. Other councils use similar rules, so check your own council's policy before ordering materials.
Does a Perth fencer need a licence or builder registration?
There is no fencing licence in WA, and Building and Energy lists fences as incidental structures that do not need a registered builder. That means you cannot check a fencer against a licence register before hiring. Ask instead for an Australian Business Number, a current public liability certificate and addresses of finished jobs. A home fencing contract worth $7,500 or more still falls under the Home Building Contracts Act 1991.
Can the council make my neighbour replace a broken fibro fence?
Council environmental health officers can issue directions under the Health (Asbestos) Regulations 1992 about asbestos cement that poses a public health risk. Health WA guidance says replacement is normally only mandatory for a fence that is extensively broken or leaning and at risk of collapse. Officers usually become involved only when the concern is significant or neighbours cannot agree. If the council cannot require removal, the dispute may need to go to the Magistrates Court.
Who arranges fencing in a survey-strata complex?
Fences between two survey-strata lots fall under the Dividing Fences Act 1961 as if the lots were neighbouring blocks, subject to the scheme by-laws. Where a lot meets land outside the scheme, the lot owner is treated as the owner of that boundary. Fences on common property are a matter for the strata company to arrange. Read the by-laws and ask the strata manager before you sign a fencer's quote.
What happens if a storm flattens our shared fence?
Under the Dividing Fences Act 1961, either owner can repair a fence damaged by storm, flood, fire or lightning straight away without notice. The owner who pays can then recover half the cost from the neighbour. If fire or a falling tree caused the damage and the neighbour's neglect is evident, that neighbour pays the full repair. Photos taken before the clean-up help with both the neighbour and any insurance claim.
Can a fencer work on a Sunday in Perth?
Construction noise is exempt from the usual limits between 7am and 7pm, Monday to Saturday, under the Environmental Protection (Noise) Regulations 1997. The City of Stirling says construction work is not permitted on Sundays or public holidays, apart from quiet tasks such as painting. Digging post holes, cutting steel and mixing concrete are not treated as quiet tasks. Agree the working days with the fencer and let your neighbour know in advance.
How much deposit can a Perth fencer ask for?
For a home fencing contract worth $7,500 to $500,000, the Home Building Contracts Act 1991 caps the deposit at 6.5 per cent. Later payments should match work already done or materials already delivered to the site. Jobs below $7,500 are outside that cap, although a small deposit and payment on completion are still common. Avoid paying the full price before the fence is finished and checked from both sides.

Perth Fencing Specialists

For Trades & Contractors - WA

Fencing in Perth often relies on other trades for the parts a fencer does not do. Gate motors need a licensed electrician, old fibro panels need a licensed asbestos removalist, and gate tracks or footings often go to a concreter. These are the services most often booked alongside a fencing job across the metro area.

Compare Perth Fencing Quotes

Tell us your suburb, the length and height of fence you need, the material you prefer and whether a neighbour shares the cost, and compare quotes from experienced Perth fencers who are all pricing the same job.

Get Free Fencing Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

Service availability may vary in regional WA. Verify licences at WA Building and Energy.
Prices are 2027 estimates based on typical Perth fencing rates. Your final price will depend on the length and height of the fence, the ground, removal of the old fence and any permit, so compare written quotes that list each part separately.
Need work done? Get free quotes. Post a Job – It's Free