Looking for a Painter in Brisbane?
Tell us your suburb, the rooms or walls to be painted, the age of the house, whether it is high-set (raised on tall stumps) or two storey and the colours you have in mind. We will pass that description to local painters across Brisbane, so every quote you receive is based on the same details.
Brisbane Painting Price Guide
These are estimated Brisbane price ranges for 2027. Your price depends on the state of the old paint, the height of the walls and how much filling and sanding is needed. Scaffolding, lead or asbestos precautions and heritage repairs are priced on quote and add to the total.
Hire a Painter Brisbane QLD - Get Local Quotes
Brisbane painters work on everything from timber Queenslanders with verandahs and fretwork in the inner suburbs to post-war fibro (fibre cement) homes, brick houses and apartments. Painting work over $3,300, including paint, labour and GST, must be done by a contractor holding a painting licence from the QBCC, the state building regulator. Pre-1970 homes have probably been painted with lead paint at some point, while fibro on pre-1990 houses may contain asbestos. Some older homes are Local heritage places listed by council, which allows a repaint only under set conditions on preparation and finish. Unit and townhouse owners usually need approval from their body corporate, the group of all owners, before changing a unit's outside look. Many houses sit high on stumps, so eaves and gables can need scaffold, a temporary platform, which needs a licensed scaffolder where a fall of over four metres is possible. Contracts over $3,300 cap the deposit paid upfront at 10 per cent, or 5 per cent from $20,000. Rented homes need written notice before painters enter while tenants live there. Paint makers say humid weather slows drying, which can push a second coat to the next day. Leftover household paint can go free to council's four resource recovery centres, its recycling drop-off sites, up to 100 litres a visit. Prices here are 2027 estimates from our Queensland painting guides, and your own quotes may differ. Post your job on The Quote Yard and we will connect you with local Brisbane painters who can quote on it.
At a Glance - Brisbane Painting Prices, 2027 Estimates
| Job | Price Range | How It Is Charged | What Drives It In Brisbane | Who Can Do It |
|---|---|---|---|---|
| Painter labour | $45 - $80 per hour | Per person, per hour | Minimum call out and travel | Licensed painter |
| Painter day rate | $400 - $650 per day | Per person, per day | Hours on site and crew size | Licensed painter |
| Single bedroom | $400 - $900 | Per room | Wall condition and colour change | Licensed painter |
| Living or dining room | $500 - $1,400 | Per room | Size, ceiling height and furniture | Licensed painter |
| Bathroom | $400 - $1,200 | Per room | Mould treatment and fittings | Licensed painter |
| Three bedroom interior | $4,000 - $10,000 | Fixed after site visit | Empty or furnished, colour change | Licensed painter |
| Single storey exterior | $5,000 - $15,000 | Fixed after site visit | Wall type and preparation | Licensed painter |
| Two storey exterior | $8,000 - $25,000 | Fixed after site visit | Scaffold or platform access | Licensed painter and licensed scaffolder |
| Eaves and fascia only | $1,500 - $4,500 | Fixed after site visit | Height and fibro testing | Licensed painter |
| Queenslander, inside and out | $15,000 - $45,000 | Fixed after site visit | Boards, fretwork and old coats | Licensed painter |
| Verandah and balustrade | $3,000 - $10,000 | Fixed after site visit | Length and decorative detail | Licensed painter |
| Under-house and stumps | $2,000 - $6,000 | Fixed after site visit | Height of the house | Licensed painter |
| Lead paint testing | $200 - $1,500 | Per visit or sample | Number of surfaces tested | Lead assessor or laboratory |
| Lead paint encapsulation | $35 - $70 per m² | Per square metre | Condition of the old coats | Licensed painter |
What Pushes a Brisbane Painting Bill Up
Hiring a Painter for a Brisbane Home
Brisbane painters charge roughly $45 to $80 per person per hour, or $400 to $650 for a full day, by our 2027 estimates. Most room, interior and exterior jobs are still priced as one fixed sum after a site visit, with the hours built into the total. The rates and whole house ranges on this page come from our Queensland painting services guide and related state pages, so they match what we publish elsewhere. Local detail is added on top, from council heritage rules and body corporate by-laws to Queensland Health lead advice and the city's paint drop-off points. Every figure is an estimate and should be checked against written quotes for your own home.
The type of house matters more to a Brisbane painting job than the suburb it is in. Timber Queenslanders and workers cottages in the inner ring often carry several layers of old paint on boards, verandahs and fretwork, the decorative cut timber panels, and some of it contains lead. Post-war homes further out commonly have fibre cement sheet, known locally as fibro, on eaves (the underside of the roof overhang) and walls, which raises asbestos questions before any preparation. Brick homes on newer estates, including rendered ones with a thin cement coat over the walls, are simpler, although two storey walls need scaffolding, temporary frames to work from. Apartments and townhouses bring extra rules, because a body corporate may control what an owner can change outside. Knowing which of these describes your home helps you brief a painter properly from the first phone call.
Brisbane Painting Prices, 2027 Estimates
A single bedroom usually costs $400 to $900 to repaint, while a living or dining room comes in at about $500 to $1,400. Our state figures put a bedroom in Brisbane's middle ring suburbs at $500 to $1,000, and a living room there at $700 to $1,500. Kitchens run from $600 to $1,800 and bathrooms from $400 to $1,200, because cupboards, tiles and fittings slow the brush work. A whole three bedroom interior falls between $4,000 and $10,000, depending on ceiling heights, the colour change and how much furniture is in the way. Internal doors add roughly $80 to $200 each when they are priced as separate items. Room by room detail sits in our interior house painting guide for Queensland.
Outside, a single storey house usually costs $5,000 to $15,000 to repaint, and a two storey house $8,000 to $25,000. Painting just the eaves and fascia, the boards along the roof edge, comes to about $1,500 to $4,500 when the walls are face brick or still sound. A timber Queenslander or other character home painted inside and out can reach $15,000 to $45,000, because every board, bracket and balustrade needs hand work. Verandahs and balustrades on their own often cost $3,000 to $10,000, and the under-house area with its stumps adds $2,000 to $6,000. Costs by wall type and by part of the house are broken down in our exterior house painting costs for Queensland and the wider Queensland house painting guide.
| Job | Brisbane Estimate | How It Is Charged | What Moves It |
|---|---|---|---|
| Middle ring bedroom | $500 - $1,000 | Per room | Ceiling height and colour change |
| Middle ring living room | $700 - $1,500 | Per room | Size, cornices and furniture |
| Kitchen, walls and ceiling | $600 - $1,800 | Per room | Cupboards and splashbacks |
| Hallway and stairwell | $1,500 - $4,000 | Fixed after site visit | Void height and access |
| Internal door | $80 - $200 per door | Per door | Panels and old enamel |
| External door | $150 - $400 per door | Per door | Weathering and hardware |
| Timber window frame | $50 - $200 per window | Per window | Putty, rot and sashes |
| Garage door | $400 - $1,500 | Per door | Size and panel profile |
| Balustrades | $40 - $120 per metre | Per linear metre | Pattern and number of pickets |
| Verandah and balustrade | $3,000 - $10,000 | Fixed after site visit | Length and decorative detail |
| Under-house and stumps | $2,000 - $6,000 | Fixed after site visit | Height and number of stumps |
| Lead paint encapsulation | $35 - $70 per m² | Per square metre | Condition of the old coats |
| Scaffold for high walls | Priced on quote | Per hire period | Wall height and ground slope |
| Asbestos sample testing | Priced on quote | Per sample | Number of samples taken |
Day Rates, Fixed Quotes and Allowances on a Brisbane Paint Job
Small jobs such as patching a ceiling stain or painting one door are often charged by the hour, usually with a minimum call out. Whole rooms and whole houses are nearly always quoted as a fixed price after the painter has walked through and measured up. A fixed price is easier to budget for, but only if it states the surfaces, the number of coats and the preparation included. Day rates suit work where the amount of repair is hard to judge, such as stripping old wallpaper or tracking down hidden rot. Ask for an estimate of the number of days as well as the day rate, so you can see the likely total before agreeing.
Allowances are amounts written into a quote for work that cannot be measured until the job starts. A provisional sum covers labour and materials for uncertain repairs, such as replacing rotten weatherboards found once the old paint comes off. Every allowance should show a dollar figure and a note of what happens if the real cost runs over. Quotes that rely on many allowances are closer to an estimate than to a fixed price.
Preparation is where Brisbane quotes differ most, especially on older timber homes. Washing down, scraping, filling, sanding and priming (applying primer, a first sealing coat) can take longer than the finish coats, and some painters show those hours separately while others fold them into one figure. The same question comes up across Queensland, as our guide to hiring a painter around Townsville shows when it splits preparation from coats. Cracked plasterboard and loose cornices, the mouldings where walls meet ceilings, are usually better fixed by a Brisbane plasterer before the painter arrives. That keeps repair work in the hands of the right trade and stops the painting quote from carrying a guessed allowance. When two quotes are far apart, the gap is usually preparation, so ask each painter to describe theirs in writing.
Reading a Brisbane Painting Quote
Each allowance should be a dollar figure with a short note of what it covers.
Ask how any overrun on an allowance will be agreed before extra work starts.
Two QBCC Painting Classes and the Render Question
In Queensland, building work valued over $3,300 must be done by a contractor licensed by the Queensland Building and Construction Commission (QBCC), and painting counts as building work. The QBCC treats the contract price as including goods, services and GST, so paint supplied by the painter is part of that figure. Two licence classes, which set the type of work a licence allows, cover the trade, called painting and decorating, and painting and decorating excluding applying cement render. Both allow painting, texture coatings, wallpaper and surface preparation, including colour matching for touch ups. The difference is render, a cement coating trowelled onto walls, because only the first class allows it up to 8 mm thick. Both class descriptions and the licence register are published on the QBCC website.
That render limit matters on Brisbane homes with patched or cracked rendered walls. A painter with the narrower class can fill and paint over sound render, but should not quote to apply a new cement render coat. Thicker render work and repairs to cracked render belong to other trades, and our render repairs guide for Queensland explains who usually does them. Both classes allow incidental work, meaning small related tasks from another class, but only where that extra work is worth under $3,300. Specialist work such as plumbing, drainage, pest control or fire protection, called occupational work, needs its own licence whatever its value.
Owners painting their own home can do work valued up to $11,000 without a licence, which suits a confident owner tackling a few rooms. That exemption is for owners working on their own property, so paid work over $3,300 by anyone else still needs a licensee. Search the QBCC online licence register for the name and number on the quote before you sign. Check that the class shown on the register matches the work being priced, since holding some other licence is not enough.
| Work | Painting and Decorating | Excluding Cement Render | What to Check |
|---|---|---|---|
| Paint and protective coatings | Included | Included | Named product and number of coats |
| Colour matching for touch ups | Included | Included | Spare paint labelled by room |
| Texture coatings | Included | Included | Product and finish named |
| Wallpaper | Included | Included | Removal of old paper priced |
| Surface preparation | Included | Included | Method for old lead coats |
| Cement render | Up to 8 mm thick | Not included | Thicker render needs another trade |
| Incidental work of another class | Under $3,300 | Under $3,300 | Scope listed on the quote |
| Plumbing, drainage or pest control | Not included | Not included | Separate occupational licence |
Contract Paperwork and Payment Caps on a Painting Job
Painting contracts over $3,300 are regulated, which means the QBCC sets what must be in writing and how much can be paid up front. Jobs from $3,300 to $19,999 need a Level 1 regulated contract, the simpler type, and jobs of $20,000 or more need a Level 2 contract with extra requirements. For Level 2 work the painter must also give you the QBCC Consumer Building Guide, a plain English booklet on your rights. Most single room jobs fall under $3,300, where no regulated contract is required, although a written quote is still worth insisting on. A whole Queenslander repaint can easily cross into Level 2, so the paperwork changes as the scope grows.
Deposit caps, the limits on money paid before work starts, follow the contract value rather than the painter's preference. The most a painter can take is 20 per cent for work of $3,300 or less, 10 per cent from $3,301 to $19,999, and 5 per cent from $20,000. Later payments, called progress payments, must relate to the work actually done, and a painter cannot claim more than half the price, deposit included, until half the onsite work is finished. A painter asking for half the money before any work starts is asking for more than the rules allow. Paying ahead of the contract dates can also reduce your protection under the home warranty scheme, the QBCC insurance for faulty or unfinished work. Pay by a traceable method and keep every invoice with the signed contract.
For contracts over $3,300 you generally have a cooling-off period of five business days to change your mind after signing. The period starts the day after you receive a signed copy of the whole contract, plus the Consumer Building Guide where it applies. Withdrawing needs a written, signed notice saying you are using the cooling-off provisions in section 35 of Schedule 1B of the QBCC Act. The painter can usually keep $100 plus any out of pocket expenses reasonably spent before you withdrew.
| Contract Value | Contract Type | Maximum Deposit | Cooling-Off |
|---|---|---|---|
| $3,300 or less | No regulated contract required | 20 per cent | Check the written terms |
| $3,301 to $19,999 | Level 1 regulated contract | 10 per cent | Five business days |
| $20,000 or more | Level 2 contract plus Consumer Building Guide | 5 per cent | Five business days |
| Any value over $3,300 | Licensed contractor required | Payments tied to work done | Signed written notice to withdraw |
Peeling Paint and the Queensland Home Warranty Scheme
The Queensland Home Warranty Scheme covers residential work valued at more than $3,300, counting materials, labour and GST. The QBCC names painting among the work done on or in a home that needs an insurance premium paid. The painter collects the premium as part of the contract price and must pay it within 10 business days of the contract being signed. Peeling, flaking or blistering paint counts as a non-structural defect, a fault that does not affect how the building stands, so the time limits are short. You need to become aware of the defect within six months of completion and lodge the claim within seven months.
Cover has gaps that matter for Brisbane apartment owners in particular. Multiple-unit buildings of more than three storeys above a car park cannot be insured, so painting inside a high-rise unit sits outside the scheme. Work by an unlicensed contractor, owner-builder work and commercial building work are not covered either. For those jobs, your protection comes from the written contract, the painter's own insurance and the consumer guarantees under Australian Consumer Law.
What the Scheme Means for a Repaint
Lead in Pre-1970 Brisbane Paint and Queensland Health Advice
The Queensland Government advises that a home built before 1970 has probably been painted with lead-based paint at some point. Queensland limited lead in paint from 1923, but paint brought in from elsewhere often had higher levels and was widely used here. Intact paint in good condition is low risk, and the danger starts when it is sanded, scraped, burnt off or demolished. Sanders and grinders create fine dust that can be breathed in or swallowed, and flaking paint can be eaten by young children. In Brisbane's older timber suburbs, ask the most careful questions about how the old paint will be prepared.
Metro North Health, part of Queensland Health, notes that paint used in older Queensland homes often contained high levels of lead. It names sanding the outside of older houses as a source of lead exposure outside the workplace. Children are at risk because even low levels can result in behavioural and learning difficulties. Pregnant women face a particular risk as well, because lead can reach the developing baby. A raised blood lead level is a notifiable condition in Queensland, which means cases are reported to public health authorities. The Metro North Public Health Unit takes general questions about lead on 3624 1111.
Testing tells you what you are dealing with before the quote is finalised, and our state figures put lead testing at $200 to $1,500. Ask whether the painter will arrange testing, or whether you should book a separate assessor first. Where lead is present, sealing sound paint under new coats so it cannot flake or form dust, called encapsulation, runs about $35 to $70 per m². Full removal and the methods used for it are covered in our guide to lead paint removal in Queensland.
Lead Paint Questions for a Brisbane Painter
Council's Exemption Certificate and Timber House Painting Advice
Some Brisbane homes are protected for their history as Local heritage places, shown on the Heritage overlay map in Brisbane City Plan 2014, the council's planning rules. Changing those places normally needs approval, but council's General Exemption Certificate, a standing permission, lets owners carry out set kinds of minor work without applying. Repainting an existing painted finish, or reapplying an existing clear finish, is one of the exempt works. The certificate covers Local heritage places only, so State heritage places, listed by the Queensland Government, follow different rules. The current version applies to work substantially started on or after 26 June 2023.
The exemption comes with conditions that a painter needs to see before quoting. Surface preparation may only happen on surfaces that already have a painted finish, and anything never finished must stay that way. Sealants and other coatings on unpainted stone or brick are not allowed. The new finish must be the same type and composition as the old one, unless you are going back to a known original finish. Pressure washing above 100 psi (pounds per square inch, a low pressure setting) and abrasive paint removal, such as sandblasting or grinding, are ruled out, except when preparing cast iron. Colour is not fixed, although council says a new colour must not harm the place's cultural heritage significance.
Owners also carry duties under the certificate, starting with checking for hazards such as lead-based paint before work begins. Keep records such as before and after photos, a written description, the owner's consent and the costs. Council's planning information line on 07 3403 8888 can tell you whether a job fits the exemption. Council's heritage fact sheets, including one on setting out the scope of a painting job, are on the Brisbane City Council website.
| Work | Allowed Under the Certificate | What the Painter Should Do |
|---|---|---|
| Repainting an existing painted finish | Yes | Match the existing finish type |
| Painting surfaces never finished before | No | Leave bare timber, stone and brick unpainted |
| Sealant on unpainted stone or brick | No | Leave it off the quote |
| Pressure washing above 100 psi | No | Use low pressure washing only |
| Abrasive paint removal | No, except on cast iron | Prepare by hand with care |
| Textured, patterned finishes or murals | No | Keep to plain paint finishes |
| Original decorative finishes such as stencilling | No | Leave them untouched and ask council |
| A new colour | Yes, with care | Choose colours that suit the place |
Council also publishes a guide called Painting traditional timber houses, written for the kind of homes found across older Brisbane suburbs. Its first rule is to leave as much of the original paint layers as possible, removing only newer coats where needed. Except on painted cast iron, it says never to remove paint with disc sanders, orbital sanders or sandblasting. Painted surfaces should be dusted or washed with a mild detergent, then cracks and holes filled and sanded smooth. New and repaired timber should be sanded, primed and undercoated, which means given sealing and base coats, so the finish coats bond properly.
The guide is specific about products as well. It recommends acrylic for external joinery, meaning timber windows, doors and their frames, and warns that paint on moving parts such as windows can leave them stuck. Oil stains are described as a popular external finish for traditional Queensland timber buildings. Water-based primers, undercoats and finishes should not be used on iron, which matters on old roofs, lacework and gutters. All surfaces should get at least two finishing coats, applied only when the temperature sits between 10 and 40 degrees. Avoid painting surfaces in direct sun on hot days, and re-putty any window where the old putty sealing the glass has failed.
Rotten weatherboards, split sills and loose verandah boards should be replaced before any paint goes on, usually by a Brisbane carpenter. Board profiles and preparation for timber cladding are set out in our weatherboard painting guide. For VJ walls, which are vertically jointed timber boards, and for bevelled chamferboards and fretwork, see our guide to painting Queenslander homes. Keep council's guide handy when talking colours, because it explains how each building era was traditionally finished.
Traditional Colour Schemes in Council's Guide
Fibro Eaves, Old Roofs and the High Pressure Water Ban
Queensland's asbestos website says a home built before 1990 is likely to contain some asbestos materials. Many Brisbane houses from the post-war decades have fibre cement eaves, wall sheets or roofs, and you cannot tell whether a sheet contains asbestos just by looking at it. A sample tested at a laboratory accredited by NATA, the national body for testing laboratories, gives a clear answer before preparation starts. Painting sound asbestos cement is ordinary maintenance where no fibres are released, using the usual precautions. The risk comes from preparation, so that is where a quote should be most specific.
Power tools such as saws, drills, sanders and angle grinders should never be used on asbestos materials. High pressure water blasters are ruled out as well, and it is now illegal to clean a fibro roof with high pressure water. For painting a corrugated asbestos cement roof or fence, the Queensland asbestos website sets out a step by step procedure. It starts with fungicide, a mould killing treatment, then a wash using a garden hose with no nozzle at low pressure and a brush that the hose water runs through. Primer goes on by brush and roller rather than with a spray compressor, followed by two coats of roof paint. Used rollers and brushes are then disposed of as asbestos waste, double bagged in thick plastic.
Ask any painter quoting on fibro how they will wash, prepare and clean up, and get the answer in writing. A homeowner can remove under 10 m² of bonded asbestos, with fibres held firmly in cement, without a licence if precautions are followed, but friable or crumbling material differs. Testing and removal are separate services, set out in our guides to asbestos testing and inspection and asbestos removal in Queensland. For whole roofs, our roof painting guide covers the coatings and access involved.
| Step | On Asbestos Cement | Why It Matters |
|---|---|---|
| Testing a sample | Yes, at an accredited laboratory | You cannot tell by looking |
| High pressure water cleaning | No, illegal on fibro roofs | It destroys the surface |
| Low pressure hose with no nozzle | Yes | Washes without damaging the sheet |
| Power sanders, grinders and drills | No | Never used on asbestos materials |
| Fungicide before washing | Yes | First step in the published procedure |
| Primer by brush and roller | Yes | No spraying with a compressor |
| P2 respirator fitted to the face | Yes | Minimum breathing protection listed |
| Used rollers and brushes | Bagged as asbestos waste | Double bagged in thick plastic |
Front Doors, Balconies and the Appearance By-Law
Owners in Brisbane apartment and townhouse complexes often need permission before a painter touches anything visible from outside. In a building format plan, where lot boundaries follow the walls, floors and ceilings, the exterior is usually common property, shared areas the body corporate controls rather than each unit (lot) owner. Changing how common property looks needs the body corporate's permission, and the scheme's by-laws, its binding house rules, may add conditions of their own. Under a standard format plan, where lot boundaries are marked out on the land, a body corporate with no by-law on the appearance of each lot cannot enforce a colour scheme. Read the by-laws and the community management statement, the document that records the scheme's rules, before choosing colours.
Where a scheme uses the default by-laws in Schedule 4 of the Body Corporate and Community Management Act 1997, the appearance rule is clear. An occupier must not change the external appearance of a lot without the body corporate's written approval, unless the change is minor and does not reduce the appeal of the lot and its surrounds. That default rule does not apply to lots created under a standard format plan. A new front door colour or a repainted balcony wall could easily count as a change in appearance. The full by-law text is on the Queensland legislation website. Ask the body corporate manager for written approval, and pass it to the painter with your brief.
Where an owner wants to improve common property, such as painting a shared stair or fence, the body corporate committee can approve work costing less than $3,000. That only applies where the improvement does not detract from the appearance of a lot, and larger work needs an ordinary resolution, a majority vote, at a general meeting of owners. The owner must then maintain the improvement and follow any conditions attached to the approval. Whole building repaints are a separate process run by the body corporate, covered in our guide to strata and body corporate painting.
Before Painting in a Body Corporate Scheme
Entry Notices When Painters Work in an Occupied Rental
Painting an empty rental between tenancies is simple to schedule, but painting an occupied one means following the entry rules of the Residential Tenancies Authority (RTA), the state tenancy body. Entry to carry out repairs or maintenance needs at least 24 hours notice on an Entry notice, known as Form 9, given in writing. Entry on a Sunday, a public holiday or between 6pm and 8am needs the tenant's agreement. The two hour entry window that applies to owners and managers does not apply to tradespeople such as painters. The forms and fact sheets are published on the Residential Tenancies Authority website.
Tenants who want to change a rental, such as attaching fixtures, use Form 23, a written request form, to ask the owner, who has 28 days to decide. Painting is not mentioned on that fact sheet, so a tenant should get the owner's written agreement before any painting starts. Silence from the owner does not count as permission, and the authority offers free dispute resolution if no answer arrives within 28 days. Tenants moving out often book a Brisbane removalist first, and our guide to pre-sale and bond painting covers the quick touch ups that often follow.
| Situation | Rule | Form or Step |
|---|---|---|
| Painter entering for repairs or maintenance | At least 24 hours written notice | Entry notice, Form 9 |
| Entry on a Sunday or public holiday | Only with the tenant's agreement | Entry notice, Form 9 |
| Entry between 6pm and 8am | Only with the tenant's agreement | Entry notice, Form 9 |
| Two hour entry window | Does not apply to tradespeople | Entry notice, Form 9 |
| Routine inspection | 7 days notice, once every three months | Entry notice, Form 9 |
| Tenant asking to attach fixtures | Owner has 28 days to decide | Request for approval, Form 23 |
| No reply from the owner | Not permission to go ahead | Free dispute resolution |
High-Set Houses, Scaffolds and WorkSafe Queensland Rules
Many Brisbane houses sit high on stumps, so a single storey Queenslander can have eaves well above the ground on its downhill side. Height changes the equipment a painter needs and the safety rules that apply to the work. WorkSafe Queensland treats scaffolding as high risk work, so a high risk work licence, held by the individual worker, is needed where a person or object could fall more than four metres. Its scaffolding guidance also sets fall protection from three metres in housing construction, compared with two metres on other construction work. Ask how the painter will reach each part of the house, not just how long the job will take.
A scaffold must not be used until a competent person, someone trained to check scaffolds, confirms in writing that it has been finished. It must then be inspected before use and at least every 30 days while it stays up. Scaffold hire for a two storey or high-set house is priced on quote, so ask for it as its own line. Painters who hire in scaffold should name the scaffolding business and confirm it holds the right licence.
Eaves, fascias and gables, the triangular walls under a pitched roof, are the highest and slowest parts of most Brisbane exteriors. Our guide to eaves, fascia and soffit painting explains how those parts are prepared and priced. On a sloping block, the under-house area and stumps are often painted from ladders or small platforms, and our state figures put that work at $2,000 to $6,000. Verandah balustrades can be reached from the deck itself, which is why they are often quoted per metre at $40 to $120. A painter who plans to work from ladders alone on a tall gable should explain why that is safe. Access equipment can cost more than the paint on a high-set house, so it should have its own line on the quote.
Access Questions for a High-Set or Two Storey House
Drying Times in Humid Brisbane Weather, According to Paint Makers
Paint makers publish their own advice on humid weather, and it explains why a good painter may stop work early on a muggy afternoon. Wattyl makes Solagard exterior paint and advises that humidity slows evaporation from water-based paint, so it stays sticky for longer and the safe time before the next coat is harder to predict. Its article warns that dew can form on cooler shaded surfaces even when no rain is forecast. It suggests starting mid-morning once surfaces are clearly dry, and not rushing the next coat when humidity is high. Late afternoons can run into evening humidity and condensation, which can spoil coats that have not yet dried.
Dulux makes Weathershield exterior paint, and its Low Sheen product page bases the two hour recoat time on 25 degrees and 50 per cent humidity. The same page warns that rain or overnight dew while the paint dries may damage or remove the coating. Dulux also says not to paint on excessively cold or humid days or when rain is forecast. Resene makes CoolColour, a pigment technology that helps darker exterior colours reflect more heat. Its painting advice puts ideal conditions at 15 to 20 degrees with 70 to 80 per cent humidity and a gentle breeze. A simple test from Resene is to check whether the washing on the line is drying, because paint behaves the same way.
Humid summers also bring mould, so walls should be cleaned and treated before new paint goes on. Selleys makes Original Sugar Soap for washing walls and Spakfilla Rapid for filling small holes before painting. Persistent mould in bathrooms usually needs ventilation fixed first, as our guide to bathroom mould removal and prevention explains. Ask each painter how they will schedule coats around the weather, and who pays if rain spoils a fresh coat.
| Source | Advice | What It Means on a Brisbane Job |
|---|---|---|
| Dulux | Recoat time based on 25 degrees and 50% humidity | Allow longer between coats on muggy days |
| Dulux | Rain or overnight dew may damage drying paint | Finish exterior coats well before evening |
| Wattyl | Start mid-morning once surfaces are dry | Early starts may meet morning dew |
| Wattyl | Do not push recoat windows in high humidity | Second coats can slip to the next day |
| Resene | Waterborne paint above 10 degrees | Cold early starts may need a later start |
| Resene | Ideal 15 to 20 degrees and 70 to 80% humidity | Mild days suit exterior work best |
| Brisbane City Council | Paint only between 10 and 40 degrees | Avoid hot direct sun on timber |
Leftover Paint, Wash Water and Brisbane Drains
Brisbane City Council accepts household paints free all year at its four resource recovery centres, the council drop-off sites for recycling and waste. The limit is 100 litres in total per visit, with no single container larger than 20 litres. Empty paint tins with only minimal residue can go in the yellow recycling bin, and small dried quantities of paint can go in the red bin. Commercial waste, with painters named as an example, is excluded from council's free hazardous waste drop-off days. Ask whether leftover paint will be left for you, labelled for touch ups, or taken away by the painter.
Paint and paint-contaminated water need to stay out of stormwater drains, creeks and other waterways. That advice comes from council's environmental guide for surface coating businesses, which also says not to spray paint onto soil or into drains. The guide explains that everyone has a general environmental duty not to cause harm, and state regulations list substances that must not enter waterways. Brushes and rollers should be washed where the water can be captured, never in the gutter outside your house. Overspray, the fine mist that drifts from a spray gun, must not leave the site, and neighbours should be told about timing and the steps planned to protect them. Ask the painter where they will wash out and how they will deal with the dirty water.
Rust-Oleum makes specialty primers and floor paints, and leftover tins of products like these belong at a resource recovery centre rather than in a bin. Norglass makes NoRUST All Surface Primer and Slip Resistant Paving Paint, products a painter might use on metal railings or concrete paths. Label every leftover tin with the room, colour, product and sheen, meaning how glossy it is, before storage. That label makes later touch ups far easier to match, and saves buying a full tin for one small patch.
Peeling or Patchy Work and the QBCC Complaint Path
Start with a written complaint to the painter, with photos, the date you noticed the problem and the part of the contract it breaches. If that fails and the contract is still running, the QBCC offers an early dispute resolution service that tries to settle the disagreement by helping both sides talk it through. Where defective work is alleged, the painter is given access to inspect it, and a QBCC building inspector may then carry out a visual inspection. If defective work is found, the QBCC may issue a Direction to Rectify, a formal order that in most cases allows 35 days to fix the work. When the complaint is still not resolved, the QBCC sends both parties a letter allowing them to apply to the tribunal. The Queensland Civil and Administrative Tribunal (QCAT), which settles building and consumer disputes, then hears the case, and its process is explained on the QCAT website.
Keep the home warranty time limits in mind while this happens, because paint defects must be noticed within six months. Write down the date you first saw any peeling, blistering or patchy colour, and take dated photos. Smaller consumer claims can go to QCAT as a minor civil dispute for amounts up to $25,000. Spare paint labelled from the job helps an inspector or a second painter judge whether the right product was used. Taubmans makes 3-in-1 Prep, a primer, undercoat and sealer, and a quote that names a product like this makes later disputes far easier to judge.
What to Look Out For Before Signing a Brisbane Painting Quote
Watch for a quote with no QBCC licence number, or a number whose class does not match the work. A deposit above the legal cap, or a request for most of the price before work starts, is a clear warning sign. Be wary of a quote for an older home that says nothing about lead testing, fibro or how scrapings will be collected. Pressure washing a heritage listed house or a fibro roof should be ruled out on the quote, not left to the day. A painter who will not name the paint product, the sheen or the number of coats makes it easier to swap in cheaper paint or skip a coat. Haymes makes its Ultra Premium range in Australia, and naming a range like this on the quote lets you check what actually arrives on site.
Check the access plan too, because ladders alone on a high-set gable should prompt questions. Look for clean up, protection of floors and gardens, and removal of leftover paint and waste on every quote. Cabot's makes Timbercolour Deck and Exterior Paint for decks and other outdoor timber. Intergrain makes decking oils and timber stains, and our guide to deck staining and oiling explains which suits a deck.
Before Signing a Brisbane Painting Contract
Getting Brisbane Painting Quotes on the Same Footing
Write one brief and give it to every painter, listing each room or wall, the colours, any damage and the year the house was built. Note whether the home is a Local heritage place, part of a body corporate scheme or rented, since each brings its own approvals. Mark surfaces that must stay unpainted, such as face brick, bare timber or a stained front door. Ask each painter to price preparation, coats, access equipment and clean up as separate lines. British Paints makes enamels and prep paints, and asking every painter to name the product for each surface keeps the comparison fair.
Compare the start date and the number of days on site as well as the price. Porter's Paints makes timber stains and speciality finishes, which suit owners after a particular look on joinery or feature walls. Rockcote makes renders and texture coatings on Queensland's Sunshine Coast, so textured walls may need a painter who knows such systems. Feast Watson makes timber oils and stains, which may suit a front door that stays in natural timber. Ask how variations will be priced and approved before any extra work begins. A short walk through with the painter before the final payment is the best moment to point out missed spots.
Painters Across Brisbane
The painting prices on this page apply across Brisbane. Painters based near your suburb rarely add travel costs, while jobs on the outer fringe sometimes carry a travel charge.
▶ Brisbane 31 areas
▶ Gold Coast 26 areas
▶ Sunshine Coast 26 areas
▶ Moreton Bay & Redcliffe 29 areas
▶ Ipswich & Lockyer Valley 28 areas
▶ Logan & Redlands 28 areas
Brisbane Painter FAQ
Does council's exemption certificate allow a new colour on a Local heritage place?
Which traditional colours does Brisbane City Council describe for an interwar timber home?
Who has to approve a new front door colour in my townhouse complex?
How much notice must a landlord give before painters come into a rental?
Will the home warranty scheme help if new exterior paint peels within months?
Can my painter use a pressure washer on fibro eaves before painting?
Why would a painter stop before the second coat on a humid afternoon?
Where can I take half-used tins of paint in Brisbane?
Who needs a licence to put up scaffolding around a high-set house?
What does Queensland Health say about sanding paint on a pre-1970 house?
Brisbane Painting Specialists
Related Services
For Trades & Contractors - QLD
Painting in Brisbane often relies on other trades for the parts a painter cannot do. Scaffolding where a fall of over four metres is possible needs a licensed scaffolder, older fibro needs asbestos testing, and cracked render or rotten timber may need a specialist before any paint goes on. These services can be booked alongside a painting job across the city.
Compare Brisbane Painting Quotes
Tell us your suburb, the rooms or walls to be painted, the age of the house and whether it is high-set or two storey, and compare quotes from local Brisbane painters all pricing the same job.
Get Free Painting QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across Queensland? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.