Looking for a Plasterer in Brisbane?
Tell us your suburb, which rooms need work, whether the damage is a crack, a hole, a leak stain or flood damage, and roughly when the house was built. We will pass that description to local plasterers across Brisbane, so every quote you receive is priced on the same details.
Brisbane Plastering Price Guide
These are estimated Brisbane price ranges for 2027. Your price depends on room size and height, the age of the wall and ceiling sheets, whether asbestos or flood damage is involved, and whether painting, electrical work or insulation is part of the job.
Hire a Plasterer Brisbane QLD - Get Local Quotes
Brisbane plasterers work on a wide mix of homes, from timber Queenslanders lined with VJ boards, timber boards V-grooved at each joint, to post-war fibro cottages, brick veneer houses and inner city apartment towers. Most jobs are repairs, such as a cracked ceiling joint, a hole behind a door, a water stain from a roof leak or a wall swollen by floodwater. Larger jobs include relining a room, building a new stud wall or replacing a sagging ceiling in an older home. Work worth more than $3,300 needs a contractor licensed by the Queensland Building and Construction Commission, along with a written contract and home warranty cover. Many Brisbane homes built before 1990 also have asbestos cement sheeting somewhere in the walls or ceilings, which should be tested before anyone cuts into it. Units have body corporate rules, set by the owners' group running the building, rentals need the owner's written approval, and heritage listed houses have their own repair conditions. Some jobs also need an electrician, an insulation installer or a licensed asbestos removalist, who may quote separately. Our prices are 2027 estimates from Queensland repair rates, before painting, electrical work or asbestos removal. Replacing a room ceiling tends to cost more in the inner suburbs, where ceilings are higher and access is tighter. Listing the rooms, the damage and the house's age before anyone quotes helps every plasterer price the same job. Post your job on The Quote Yard to reach local Brisbane plasterers who can quote on it.
At a Glance - Brisbane Plastering Estimates 2027
| Job | Price Range | How It Is Charged | What Drives It In Brisbane | Who Can Do It |
|---|---|---|---|---|
| Small crack or hole patch | $150 - $400 | Per job | Number of patches and paint match | Plasterer or handyman |
| Nail pop and screw head repair | $280 - $650 | Per room | Number of popped fixings | Plasterer |
| Plasterboard sheet replaced | $300 - $700 per sheet | Per sheet | Cut-outs for fittings | Plasterer |
| Plasterboard supplied, fixed and set | $45 - $75 per m² | Per square metre | Board type and finish level | QBCC licensed plasterer |
| Supplied, fixed, set and painted | $70 - $120 per m² | Per square metre | Paint system and coats | Plasterer with a painter |
| Sagging ceiling re-fixed | $600 - $1,600 | Per room | Batten condition and room size | Plasterer |
| Room ceiling replaced | $1,400 - $3,200 | Per room, 12 to 16 m² | Height, access and light fittings | QBCC licensed plasterer |
| Fibrous plaster ceiling replaced | $2,200 - $4,800 | Per room | Weight of old sheets and disposal | QBCC licensed plasterer |
| VJ or tongue and groove repair | $90 - $180 per m² | Per square metre | Board profile and timber supply | Carpenter or plasterer |
| Re-sheet and set a single room | $1,500 - $4,000 | Per room | Wall area and corners | QBCC licensed plasterer |
| Cornice repairs | $15 - $30 per lineal metre | Per lineal metre | Profile matching | Plasterer |
| Flood cut and strip out | $60 - $180 per lineal metre | Per lineal metre of wall | Height of the waterline | Restoration contractor |
| Asbestos sheet ceiling removal | $55 - $110 per m² | Per square metre | Area and type of asbestos | Licensed asbestos removalist |
| Pre-renovation asbestos inspection | $300 - $700 | Per inspection | Number of samples | Asbestos inspector |
What Pushes a Brisbane Plastering Bill Up
Plastering Work in Brisbane Homes
Brisbane homes have an unusually wide range of wall and ceiling surfaces for a plasterer to work on. Timber Queenslanders built before the Second World War were often lined with timber boards rather than plaster, while many post-war cottages used fibro sheeting that may contain asbestos. Brick veneer and lightweight homes from the 1970s onwards are mostly lined with plasterboard, which is gypsum plaster pressed between two paper facings. Even a small patch in an inner city apartment tower can involve fire-rated walls, which slow a fire's spread, sound-reducing ceilings and the rules of the body corporate, the owners' group running the building. Telling the plasterer which of these your home has helps you get a quote that matches the job.
Several government bodies set the rules for plaster work in Brisbane. The Queensland Building and Construction Commission (QBCC) licenses contractors, caps deposits and runs the Queensland Home Warranty Scheme, the State insurance for unfinished or faulty home building work. Brisbane City Council controls building noise, waste disposal and changes to local heritage places. State agencies cover asbestos removal, tenancy approvals and body corporate decisions, and the statewide guide to plastering and gyprock repairs in Queensland covers the basics of cracks, holes and finishes.
Most plaster jobs in the city fall into a handful of types. Small repairs cover holes, cracked joints, popped screws and damaged cornice, the moulding that runs where a wall meets the ceiling. Ceiling work ranges from re-fixing a sagging sheet to replacing a whole ceiling in an older house. Relining means stripping and replacing the board across a full wall or room, often after water damage. New work includes stud walls, framed with upright timber or steel studs, linings in extensions and bulkheads, which are boxed-in sections of ceiling that hide pipes or ducts. Each type is priced differently, so each has its own line in the price table.
Brisbane Plastering Prices for 2027
The estimates below are 2027 figures taken from published Queensland repair and ceiling rates, including rates quoted for Brisbane ceilings. They cover labour and standard materials for each task, but not painting unless the row says so. Most Brisbane plasterers price small repairs as a fixed sum per job, because one patch needs several visits to set it, meaning fill it with plaster compound, then sand it and let it dry. Larger work such as relining a room is priced per square metre of board or per sheet. Asbestos removal, electrical work and insulation are normally separate lines, sometimes from separate businesses. A quote that bundles all of these into one figure is hard to compare with anyone else's.
Published hourly rates for Brisbane are patchy, so we treat hourly work as priced on quote. Some plasterers charge a minimum call-out for small jobs, then give a fixed price once they have seen the damage. Others prefer a day rate for a run of repairs across a whole house, a method also used by plasterers around Townsville. Both methods work the same way in Brisbane, even though the local figures differ. Ask how many visits are included, since a patch usually needs more than one coat with drying time in between. What matters most is that every quote names the rooms, the board and the finish being priced.
| Job | Brisbane Estimate | How It Is Charged | What Moves It |
|---|---|---|---|
| Small crack or hole patch | $150 - $400 | Per job | Size and number of patches |
| Nail pop and screw head repair | $280 - $650 | Per room | Number of popped fixings |
| Plasterboard sheet replaced | $300 - $700 per sheet | Per sheet | Cut-outs for fittings |
| Plasterboard supplied, fixed and set | $45 - $75 per m² | Per square metre | Board type and finish level |
| Supplied, fixed, set and painted | $70 - $120 per m² | Per square metre | Paint system and colours |
| Sagging ceiling re-fixed, one room | $600 - $1,600 | Per room | Batten condition |
| Full room ceiling replaced | $1,400 - $3,200 | Per room, 12 to 16 m² | Height and light fittings |
| Fibrous plaster ceiling replaced | $2,200 - $4,800 | Per room | Sheet weight and disposal |
| Re-sheet and set a single room | $1,500 - $4,000 | Per room | Wall area and corners |
| Cornice repairs | $15 - $30 per lineal metre | Per lineal metre | Profile and length |
| Stain blocking sealer on water marks | $8 - $18 per m² | Per square metre | Size of the stain |
| Waste removal and site clean | $180 - $650 | Per job | Volume and tip fees |
Why Inner Brisbane Ceilings Cost More to Replace
Published Queensland rates show a clear gap between ceiling work in inner Brisbane and work further out. Replacing one room ceiling is estimated at $2,600 to $5,200 in the inner suburbs, compared with $2,200 to $4,400 on the northside and $2,100 to $4,300 on the southside. The difference has little to do with the board itself, which costs much the same across the city. It comes from taller ceilings, narrow streets with limited parking and older houses where the old lining is harder to remove. Fibrous plaster sheets, which are cast plaster, meaning plaster poured into moulds, reinforced with fibre and much heavier than modern board, are common in these older homes.
Access equipment is one of the costs that varies most in the older suburbs. Ceilings above about 2.7 metres usually need trestles, which are sturdy work platforms, mobile scaffold or a lift, estimated at $350 to $1,200 on a room-sized job. Stairwells and raked ceilings, which slope with the roof line, can need more than that. Ask whether the plasterer owns the equipment or hires it, because hired gear is often charged by the day.
Whole-house prices follow the same pattern on a bigger scale. Replacing every ceiling in a house of around 120 square metres is estimated at $13,000 to $26,000 in inner Brisbane and $10,000 to $21,500 on the southside. These figures assume new plasterboard on sound battens, the timber or steel strips a ceiling is fixed to, with no asbestos or structural repairs. Battens damaged by termites, sagging roof framing or leaking roof sheets would all have to be fixed first. Anyone pricing the work should look above the ceiling before quoting, checking the points listed for ceiling repairs across Queensland.
Room Ceiling Replacement by Area
These figures come from published Queensland ceiling repair rates and are estimates only.
Your own quote depends on ceiling height, access, light fittings and what sits above the old lining.
Owner Work, Handyman Jobs and the QBCC $3,300 Line
In Queensland, building work valued at more than $3,300 must be done by a contractor holding a QBCC licence, and plastering is building work. For home warranty purposes the QBCC counts labour, materials and GST together, so a job quoted at $3,100 plus GST is already over the line. Two licence classes cover most plaster jobs: plastering drywall, for plasterboard, framing and cornice, and plastering solid, for render, a wet coat over brick or block, and cast plaster. Before signing anything, search the plasterer's licence number on the QBCC register, which is free online. The register shows whether the licence is current and which classes it covers.
A handyman without a QBCC licence can do small patches, as long as the job is worth no more than $3,300 and involves no electrical or plumbing work. That suits a few nail pops, where a fixing pushes out and leaves a small bump, a dent from a door handle or a hole left by an old wall bracket. Once the work grows to a full room or a ceiling, it usually crosses the line and needs a licensed plasterer. Splitting one job into several small invoices to keep each under the limit is a warning sign worth questioning. The same licensed business often handles larger repairs that a handyman cannot take on, together with wall crack repair .
Owners can do building work on their own property without a licence if it is worth no more than $11,000. This suits a confident owner patching a garage or a spare room, but not a job that needs a licensed trade. The QBCC lists owner-builder projects among the work that home warranty insurance does not cover. Electrical and plumbing work need their own licensed trades whatever the value of the job.
| Situation | Licence Needed | Home Warranty | What to Check |
|---|---|---|---|
| Handyman patch, $3,300 or less | No QBCC licence if not electrical or plumbing | Not covered | Written quote and insurance |
| Plaster job over $3,300 | QBCC licence with a plastering class | Covered for residential work | Licence number and class on the register |
| Owner doing own work, up to $11,000 | No licence | Not covered | Your own safety and asbestos checks |
| Render or cast plaster work over $3,300 | Plastering solid class | Covered for residential work | Class shown on the register |
| Power points or lights moved | Licensed electrician | Separate trade | Electrical licence number |
| Asbestos sheeting removed | Class A or B licence for larger jobs | Separate trade | WorkSafe Queensland licence |
Deposits, Progress Claims and the Five-Day Cooling-Off Period
QBCC rules cap the deposit a contractor can take before plastering starts. For work worth $3,300 or less, the most a contractor can ask for is 20 per cent. Between $3,301 and $19,999 the cap is 10 per cent, and from $20,000 it drops to 5 per cent. Most room relines and ceiling replacements in Brisbane fall in the middle tier, so a $9,000 job should not need more than $900 upfront. A request for half the price before the first sheet goes up is well outside the rules.
Progress claims, the part payments a contractor bills as each stage is finished, must also match the work done. The QBCC gives the example that a contractor cannot claim more than half the price until at least half the work on site is complete. For plastering, sensible stages are board fixed, joints set and sanded, and the final coat or paint finished. Each claim should come with enough detail to show what has been done since the last one. Paying ahead of the schedule removes the main protection you have if the job stalls. Keep each invoice and receipt with the contract, as together they show what was paid against each stage.
Contracts over $3,300 come with a cooling-off period of five business days, a short window in which you can cancel. It starts the day after you receive a signed copy of the whole contract, and for jobs of $20,000 or more you must also receive the QBCC Consumer Building Guide. To withdraw, you give the contractor a signed written notice, and they can keep $100 plus reasonable out-of-pocket costs. The right does not apply if you had formal legal advice on the contract before signing it.
| Contract Value | Deposit Cap | Contract Type | Cooling-Off |
|---|---|---|---|
| $3,300 or less | 20 per cent | No QBCC contract required | Not applicable |
| $3,301 to $19,999 | 10 per cent | Level 1 written contract | Five business days |
| $20,000 or more | 5 per cent | Level 2 contract with the Consumer Building Guide | Five business days |
| Progress claims over $3,300 | No more than half the price before half the onsite work | Payments tied to work completed | Not applicable |
Home Warranty Cover for Brisbane Houses and Apartment Towers
The Queensland Home Warranty Scheme covers residential work over $3,300, and the QBCC lists plastering among the trade jobs it covers. The contractor must take out the cover on your behalf before the residential work starts. It can help if the plasterer leaves the job unfinished or does not fix defective work. Cover only applies to licensed contractors, so unlicensed work over the limit leaves you without it. Owner-builder work and projects worth $3,300 or less are also outside the scheme.
Apartment owners in Brisbane need to check one rule in particular. Multiple-unit buildings more than three storeys above a car park are not treated as residential construction work, so plaster work inside many inner city towers is not insurable. Buildings of three storeys or fewer above a car park can still be covered. A car park only counts as a storey if it takes up half or less of that level. In a tall tower, a written contract, a licensed contractor and staged payments become your main protection.
Time limits are tight for non-structural plaster faults, such as cracks or a poor finish that do not weaken the building. You must become aware of a non-structural defect within six months of the work being substantially complete, meaning finished apart from minor items, and lodge a claim within seven months. Cracked joints, popped screws or a ceiling that dips soon after the job should be reported early rather than left to see if they get worse. Structural defects have a longer window of six years and six months from the day cover starts.
Home Warranty Limits for Plaster Work
Keep the contract, receipts and photos together so a claim can be made quickly.
Note the date the plasterer finished, because the six month clock starts from substantial completion.
Flood-Soaked Plasterboard After River and Creek Flooding
Brisbane homes near the river and its creeks have flooded more than once in living memory, and plasterboard is one of the first materials to fail. Board that sits in water swells, loses strength and can trap moisture inside the wall cavity. The QBCC's recovery advice says linings should be partly removed where needed so the walls can dry. It also says no finishing work should start until the moisture content of the wall framing, the share of the timber's weight that is water, drops below 16 per cent. A plasterer who wants to reline the week after the water goes down may be skipping the drying check.
Photograph every wall before anything is cut out or thrown away, because insurers may want to see the damage. The QBCC also recommends getting at least three quotes, using a written contract and paying only for completed work. Kickers, the boards under kitchen and bathroom cabinets, should come off so air can reach the wall behind. Business Queensland lists insulation batts, the soft blanket-style pieces laid between frame timbers, among the materials that absorb water and slow drying. A flood restoration contractor often handles drying and strip out before a plasterer is called back.
Drying time depends on how high the water reached and how long it stayed. Restoration firms commonly cut a straight line across the wall above the waterline, called a flood cut, so the lower section comes out in one piece. Strip out of this kind is estimated at $60 to $180 per lineal metre, and drying runs at about $600 to $1,800 per room. Insurers and restoration firms usually agree on that scope before the plasterer is asked to quote the reline. Wattyl makes the I.D Advanced paint range, which includes a ceiling paint sold with an anti-mould warranty. Mould on studs or on the back of old board is a separate problem, covered under mould remediation.
Before Relining a Flooded Room
Ask the plasterer to record the moisture reading in a photo or on the invoice.
Power must be made safe by a licensed electrician before wet walls are opened up.
Choosing Linings That Cope Better With Floodwater
When flood-affected rooms are relined, there is a chance to use materials that recover better if water comes through again. Business Queensland lists plasterboard among the linings with low water resistance. Fibre cement sheet, ceramic wall tiles and galvanised steel sheet are listed as more resistant. For kitchens, it suggests replacing plasterboard with fibre cement and tiling over it with waterproof adhesive. Where water only reached the lower part of a wall, hardwood panelling or tiles partway up can limit the damage next time.
Guidance on building to cope with floods from the Queensland Government adds detail about wall cavities. It says a cavity should be able to be cleaned out after a flood, which is easier when sheets are screw fixed. Single skin construction, where the lining sits on one side of the studs only, is another option it describes. It also recommends a mould-resistant paint on the stud work before new linings go on. Closed cell foam or polystyrene insulation boards soak up little water, so they hold up better than batts in a wall that may flood again.
James Hardie makes Hardie Groove Lining, a fibre cement sheet with a grooved face for interior walls and ceilings. The maker lists it for kitchens, laundries and bathrooms, excluding showers. CSR Gyprock makes Aquachek, a moisture-resistant plasterboard for wet areas, although no plasterboard is a flood-proof product. Ask the plasterer which board they are quoting and why, because the price per square metre differs between them.
| Material | How It Handles Water | Where It Suits | Cost Effect |
|---|---|---|---|
| Standard plasterboard | Swells and may grow mould | Rooms above likely flood levels | Lowest cost per m² |
| Moisture-resistant plasterboard | Resists splashes, not floodwater | Bathrooms and laundries | Slightly higher |
| Fibre cement sheet | Higher water resistance | Lower walls and kitchens | Higher material cost |
| Ceramic tiles over fibre cement | Higher water resistance | Kitchens and lower walls | Tiler adds labour |
| Hardwood panelling partway up | Can be cleaned and dried | Lower walls in living areas | Carpenter adds labour |
| Polystyrene insulation boards | Closed cell, absorbs little water | Wall cavities | Higher than batts |
VJ Board Walls and Plasterboard in Timber Queenslanders
Many older Brisbane houses were never plastered at all. The State Library of Queensland notes that walls and ceilings in many Queensland houses were lined with tongue-and-groove timber boards, first with a rounded bead along each joint and later V-jointed, known as VJ. Main rooms sometimes had decorative plaster ceiling roses, the round mouldings around a light, and cornices set against the timber. In many of these houses the boards are the wall itself, fixed to one side of the studs with no lining behind. That single skin layout changes what a plasterer can and should do.
Fixing plasterboard straight over old VJ boards hides the timber and can create problems around doors, skirting boards and window frames. It also adds thickness, so architraves, the timber trims around doors and windows, and power points may need to be moved. Repairing the boards themselves is closer to carpentry than plastering, with published Queensland rates of $90 to $180 per square metre. A Brisbane carpenter may match the board profile, while the plasterer handles any plaster ceilings and cornices. Some owners keep VJ in living rooms and use plasterboard only in renovated wet areas or extensions. Ask the plasterer to explain where the plasterboard will stop and the timber will start before work begins.
Where a VJ look is wanted on a new wall, a grooved fibre cement sheet is one alternative to new timber. Painting old boards is a separate job, with more detail under Queenslander home painting. Wallpaper was sometimes tacked over boards on a calico or hessian backing, so old layers may still turn up during a renovation. Older paint layers can contain lead, and a Brisbane painter can explain how that part of the job is handled.
Timber Boards or Plasterboard
Ask whether the quote covers patching timber, plaster or both.
Photos of each wall from inside and from under the house help a plasterer see how the boards are fixed.
Plaster Repairs in Brisbane Local Heritage Places
Brisbane City Council expects houses built before 1911 to be retained, and its traditional building character overlay, a planning rule on the look of older streets, protects pre-1947 houses in many suburbs. Those rules mostly deal with demolition, extensions and how a house looks from the street. Local heritage places, the individual properties on council's heritage register, are different, because council controls changes to the place itself to protect its heritage value. Some repair and maintenance work can go ahead under council's General Exemption Certificate, a standing permission for listed minor work, without an application or fee. Other repairs need a Heritage Exemption Certificate, which involves an application, a fee and council approval.
The General Exemption Certificate has several conditions that apply directly to plaster. Damage to fragile elements such as plaster ceilings must be repaired to match the existing finish. Chasing, which means cutting a groove for cables, is only allowed in surfaces that can be patched to match, such as smooth render or plaster. Screws and other fixings should be kept out of fragile walls and ceilings. New partitions must be scribed, or cut to fit closely, around cornices, skirting boards and other decorative details rather than cutting through them.
Replacement is also limited, with no more than 20 per cent of an element replaced in any three-year period. Council's guidance favours repairing only the damaged area rather than replacing whole elements. For a cornice, that means a plasterer who can shape a matching profile on site or cast it in a mould, rather than fitting a plain modern cornice. Matching old profiles is specialist work, priced well above standard cornice installation and repairs.
| Condition | What It Means for Plaster | If It Cannot Be Met | Who Confirms It |
|---|---|---|---|
| Repair to match existing | Same composition, profile and finish | Heritage Exemption Certificate or approval | Brisbane City Council |
| Chasing for cables | Only in render or plaster that can be patched | Find another cable route | Electrician and council |
| Fixings into fragile linings | Avoid less robust walls and ceilings | Use a different fixing point | Plasterer |
| Partitions near decorative details | Scribed around cornices and skirtings | Redesign the partition | Designer or council |
| Replacement limit | No more than 20 per cent in three years | Apply for approval | Brisbane City Council |
Testing Fibro and Textured Linings Before Anyone Cuts
The QBCC says asbestos was widely used in building from the 1940s to the 1980s, and houses built before 1990 have a good chance of containing some. Building products containing it were banned in 1990, with a total ban from 2003. The Queensland Government asbestos website points to wall and ceiling sheeting and the linings under the eaves among the places to check inside and outside a house. Brisbane City Council also lists textured coatings among products that may contain asbestos. You cannot tell by looking, so a sample has to be tested in a laboratory.
A single laboratory test is estimated at $30 to $80, and a pre-renovation inspection at $300 to $700. Testing before the plasterer quotes means the price can include, or exclude, removal from the start. Bonded, or non-friable, asbestos is set firmly in cement, and less than 10 square metres of it can be removed without a licence if safety precautions are followed. Larger areas need a remover with a class B licence, which covers bonded asbestos only, and friable asbestos, which crumbles by hand when dry, needs a class A licence. Licensed removal of a bonded asbestos sheet ceiling is estimated at $55 to $110 per square metre. Licensed removers are listed by WorkSafe Queensland, and sampling is described under asbestos testing and inspection.
Brisbane's strictest asbestos rules deal with how the waste is disposed of. Council says it is illegal to put asbestos in household kerbside bins, business bins or council resource recovery centres, which are the city's tips. Fines for illegal dumping can exceed $50,000, plus legal and investigation costs. Licensed removal contractors can supply a specially lined bin for tradespeople during renovations, then collect it for disposal. Before the job starts, ask who will handle the waste, and use licensed asbestos removal for anything over the limit.
Asbestos Steps for a Brisbane Plaster Job
Keep the test certificate with your contract and give a copy to the plasterer.
Report illegal dumping to the Pollution Hotline on 1300 130 372.
Plaster Work in Brisbane Units and Townhouses
Plaster repairs in a unit raise a question that houses do not, which is who owns the wall. Under a building format plan, the type of survey plan most apartment buildings use, the boundary of each lot, meaning each unit, runs through the centre of the floor, wall or ceiling. The body corporate is usually responsible for essential structural parts such as load-bearing walls, even where they are not on common property, the shared parts of the scheme. The owner generally looks after the inside of the lot, including its fixtures and fittings. Your survey plan and the community management statement, the registered document that lists the scheme's by-laws, give the answer for a particular building.
Improvements to common property by an owner need approval first. The committee can approve work costing under $3,000 that does not detract from the look of the lot, while larger work needs an ordinary resolution, a simple majority vote, at a general meeting. The owner must then tell the body corporate the type and value of the work and maintain it. Council can fine audible building work between 6.30pm and 6.30am Monday to Saturday, and at any time on Sundays and public holidays. By-laws may add their own hours, lift bookings and rules for carrying long sheets through the building. Common area walls are usually handled through the body corporate, which may bring in strata and body corporate painting at the same time.
Fire-rated walls and ceilings between units need extra care. The QBCC plastering drywall class includes non-loadbearing fire-rated walls and ceilings, which hold up only their own weight, and any opening cut through them should be sealed so the wall keeps its rating. Promat makes fire protection boards and fire stopping products, which seal gaps so fire cannot pass through, for this kind of work. Sika makes construction sealants and adhesives, including a fire-resistant sealant range.
| Item | Usually Responsible | Approval Needed | Where to Check |
|---|---|---|---|
| Inside of the lot, fixtures and fittings | Lot owner | Check the by-laws | Community management statement |
| Load-bearing walls | Body corporate | Body corporate decision | Survey plan and committee |
| Owner improvement to common property under $3,000 | Owner, once approved | Committee | Body corporate secretary |
| Larger owner improvement to common property | Owner, once approved | Ordinary resolution at a general meeting | Meeting minutes |
| Fire-rated walls between units | Check building records first | Body corporate before cutting | Building manager |
| Noisy work hours | Contractor | Audible work 6.30am to 6.30pm, Monday to Saturday | Council rules and by-laws |
Renters, Form 23 and Plaster Changes in a Brisbane Rental
Tenants in Queensland need the owner's written approval before attaching a fixture or making a structural change. The request goes on Form 23, the official request form for a fixture or structural change, from the Residential Tenancies Authority, with a separate form for each request. The property manager or owner must be reasonable and reply in writing within 28 days. In a unit, a request that also needs body corporate consent must be passed on within 28 days, and the body corporate has no set reply time. Hooks are listed as an example of a fixture, so even small fittings into plaster can need approval.
Approval can come with reasonable conditions attached by the owner. One example the RTA gives is that a fixture must be professionally installed, and another is that the tenant repairs any damage when it comes out. That often means a plasterer patching screw holes and painting before the tenancy ends, within the small repair range of $150 to $400. Ramset makes hollow wall anchors, plugs that grip the back of the sheet, for fixing items to hollow walls such as plasterboard. If you are moving out with a Brisbane removalist, book the patching a few days before the final inspection.
Owners must keep a rental property in good repair, including plaster damaged by a roof leak or a storm. The tenant should report the damage promptly and in writing. Water stained ceilings can hide a sagging lining, so an inspection is worth arranging before a stain is simply painted over. Taubmans makes a 3 In 1 primer, undercoat and sealer for interior and exterior surfaces, and a sealer stops water marks showing through new paint. Dulux makes Ceiling White, a paint made for ceilings, which suits the final coat after a repair. Keep copies of every request and reply in case the matter later goes to the RTA or to QCAT, the State tribunal for tenancy and consumer disputes.
Plaster Changes in a Rental
Keep a dated copy of each form and the reply.
Photos of the wall before and after the work help at the final inspection.
Electricians, Insulation and Other Work Behind the Wall
Most plaster jobs disturb something else in the wall or ceiling. Light fittings, ceiling fans, smoke alarms and power points must come off before a ceiling is replaced, then go back on. A Queensland electrical safety campaign states plainly that people should always use a licensed electrician, naming power points and light fittings as examples. Removing and refitting a light or fan is estimated at $120 to $320 per point. Booking a Brisbane electrician for the same week keeps the ceiling open for the shortest time.
Insulation above a ceiling usually has to be lifted and put back when the lining is replaced. Removal and reinstatement is estimated at $12 to $25 per square metre, and damaged batts may need replacing. Fletcher Insulation makes the Pink Batts, Soundbreak and Pink Partition insulation ranges. Rondo makes steel stud framing and ceiling systems, including the KEY-LOCK suspended ceiling range. Insulation products and costs are described under ceiling and wall insulation installation.
Plaster dust and offcuts also need somewhere to go. Brisbane's council tips charge households $14.20 for up to 100 kilograms of general waste and $34.00 for 100 to 500 kilograms. Commercial loads cost more, at $26.60 and $95.00 for the same weights, and that rate applies to business loads. Households receive ten 100 kilogram vouchers a year, so some owners take clean offcuts to the tip themselves.
| Task | Who Does It | Estimate | Note |
|---|---|---|---|
| Light or fan removed and refitted | Licensed electrician | $120 - $320 per point | Book before and after the plasterer |
| Power point moved | Licensed electrician | Priced on quote | Not a plastering task |
| Insulation lifted and replaced | Plasterer or insulation installer | $12 - $25 per m² | New batts cost extra |
| Stain blocking sealer | Plasterer or painter | $8 - $18 per m² | Stops water marks showing through |
| Waste removal and clean | Plasterer | $180 - $650 | Check tip fees are included |
| New ceiling access hatch | Plasterer or carpenter | $180 - $420 | A lift-out panel into the roof space for later checks |
If a Brisbane Plaster Job Cracks, Stalls or Goes Wrong
Start by telling the plasterer about the problem in writing, with photos and the date you first noticed it. Hairline marks along joints can appear as a house moves, but wide cracks, popped screws and sagging sheets soon after a job suggest a fault. If the contract is still active, the QBCC offers an early dispute resolution service, which contacts both parties to help settle the problem. Where that fails, a QBCC building inspector may visit and look at the work. If defective work is found, the QBCC may issue a direction to rectify, an official order to fix the work, usually with 35 days to comply. You must give the contractor reasonable access to carry out those repairs.
Disputes that stay unresolved can go to the Queensland Civil and Administrative Tribunal, known as QCAT, once the QBCC process is finished. Minor civil disputes, which include many consumer claims, can be heard there for amounts up to $25,000. Home warranty claims for incomplete or defective work run alongside this process, within the time limits set out earlier. Cracks that keep coming back after repair can point to movement in the house rather than poor plastering. A building inspection can show whether the frame, the footings or the plaster is the real cause.
Consumer guarantees under the Australian Consumer Law also apply to plastering services. Work must be carried out with an acceptable level of care and skill, and be fit for any purpose you made known. Where no finish date was agreed, the service must be supplied within a reasonable time. These guarantees, explained by the ACCC, sit alongside the QBCC process rather than replacing it.
What to Look Out For Before a Brisbane Plasterer Starts
A few warning signs come up again and again in Brisbane plaster quotes. A quote with no licence number for work clearly over $3,300 is the first. A deposit above the QBCC caps, or a request for full payment before the work is done, is another. After floods and storms, door-to-door offers to reline walls straight away deserve extra caution. Quotes that skip any mention of asbestos in a house built before 1990 leave a large cost unaccounted for. So do quotes that say nothing about access equipment for high ceilings.
Look closely at what the price leaves out. Painting, light fittings, insulation, cornice and waste removal are often excluded without saying so, and a painter in Brisbane may need to quote separately. Siniat makes plasterboard, steel framing and jointing compounds, the fillers used over joints, and lists an Australian plant at Beenleigh. Haymes makes interior paints for walls, ceilings and trims, which may be named in a quote that includes painting.
Other signs are less obvious but just as useful. A plasterer who cannot say which board they will use, or who quotes the same price for every room regardless of height, has probably not measured. A quote that promises an invisible patch on an old textured wall may lead to a dispute later. Ask how many visits the job will take and how long each coat needs to dry. A clear answer suggests the plasterer has planned the work rather than guessed at it.
Checks Before You Sign
Ask for the quote in writing and keep it with the contract.
Compare board types and finish levels before comparing the bottom line.
Getting Brisbane Plastering Quotes You Can Compare
Quotes are only comparable if every plasterer is pricing the same job. Write down each room, the size of the damage, the ceiling height and whether walls are plasterboard, fibro or timber boards. Add the year the house was built, any flood or leak history and whether you live in a unit or a rental. Photos of each wall and ceiling, plus the access from the street, save a wasted visit. Ask for labour, materials, access equipment, waste and painting as separate lines. If you have a moisture reading, an asbestos test result or a body corporate approval, attach those as well.
Three quotes is a sensible number, and it matches the QBCC's own advice after a disaster. Check each licence on the register before comparing prices, then compare the board types and finish named. Selleys makes Spakfilla Rapid wall filler, which suits tiny dents but not the joints and sheets a plasterer quotes on. When you are ready, post the job through The Quote Yard and local Brisbane plasterers can price the same written scope. A clear scope also makes any later variation easier to agree in writing. Keep every quote, contract and receipt together until the home warranty time limits have passed.
Plasterers Across Brisbane
Plastering estimates on this page apply across greater Brisbane. Jobs near the inner suburbs rarely carry a travel charge, while outer suburbs and fringe areas sometimes do.
▶ Brisbane 31 areas
▶ Gold Coast 26 areas
▶ Sunshine Coast 26 areas
▶ Moreton Bay & Redcliffe 29 areas
▶ Ipswich & Lockyer Valley 28 areas
▶ Logan & Redlands 28 areas
Brisbane Plasterer FAQ
When does a Brisbane plaster job cross the QBCC $3,300 line?
How long should flood-damaged walls dry before new plasterboard goes on?
Is plaster work inside my Brisbane apartment covered by home warranty?
How much deposit can a plasterer ask for on a $10,000 reline?
Can I cover the VJ boards in my Queenslander with plasterboard?
Do I need council approval to repair plaster in a heritage listed Brisbane house?
Where can I take old fibro sheeting removed from my walls?
Do I need permission to fix things to the walls of a Brisbane rental?
What hours can a plasterer work in my Brisbane street?
Who fixes cracked plaster on the wall between two units?
Brisbane Plastering Specialists
Related Services
For Trades & Contractors - QLD
Some plaster jobs in Brisbane need other trades for the parts a plasterer cannot do. Power points and light fittings need a licensed electrician, larger amounts of asbestos need a licensed removalist, and rotten framing or VJ boards often go to a carpenter. These are services that can be booked alongside a plastering job around the city.
Compare Brisbane Plastering Quotes
Tell us your suburb, the rooms affected, the type of damage and the age of the house, and compare quotes from local Brisbane plasterers who are all pricing the same job.
Get Free Plastering QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across Queensland? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.