Looking for House Washing in Sydney?

Tell us your suburb, the number of storeys, what the walls are made of, the build year and whether the home is in a strata scheme or heritage area. We will pass the same details to local house washers, so every quote you receive prices the same work.

Get Free House Washing Quotes

Sydney House Washing Price Guide

Minimum call-out, one small job$150 - $250
Hourly rate, where charged by time$70 - $130
House wash, single storey walls and eaves$400 - $700
House wash, two storey$700 - $1,200
House exterior wash, by storeys and area$400 - $1,200
Roof soft wash, whole roof$600 - $2,400
Paths and paving$150 - $450
Deck or patio$150 - $500
Pre-sale package, single storey brick home$1,400 - $2,800
Pre-sale package, two storey rendered home$2,500 - $4,500

These are 2027 estimates for house washing in Sydney. Your price depends on the number of storeys, the wall area and materials, mould or salt build-up, access to upper walls and how wash water is handled.

House Washing Services Sydney NSW - Get Local Quotes

House washers across Sydney clean the walls, eaves (the underside of the roof overhang), window frames and downpipes of terraces, brick bungalows, fibro cottages, rendered homes and apartment blocks. Sydney Water's Water Wise Guidelines let you use drinking water at any time to wash walls, windows, gutters and roofing. A garden hose used for that needs a trigger nozzle, which stops the flow when released, unless it feeds high-pressure cleaning equipment. Northern Beaches Council says only rain belongs in street drains, lists detergent as a pollutant and says fines apply. SafeWork NSW warns never to use high-pressure water on asbestos products, which matters for fibro, the old cement sheeting on many walls, eaves and sheds. Lead paint was used in most Australian homes built before 1970, so flaking paint on an older house needs care before any wash. Many inner-suburb terraces have no side access, so hoses may run through the house or from a rear lane, and older brick and sandstone need a gentle rinse. In strata schemes the owners corporation, meaning all the unit owners together, maintains the external walls, while each lot owner usually cleans the window glass they can reach. BlueScope says sheltered COLORBOND steel should be hosed at least every six months, and more often near the coast. Our 2027 estimates for Sydney include $400 to $700 for the walls and eaves of a single-storey house and $700 to $1,200 for two storeys. Post your job on The Quote Yard and we will connect you with local house washers who can quote on it.

House Washing for Sydney Homes and Apartment Blocks

House washers in Sydney clean walls, eaves, window frames and downpipes on terraces, brick homes, fibro cottages, rendered houses and strata blocks. Send one description of the job through The Quote Yard and local house washers can each price the same work.

Get Free Quotes

At a Glance - Sydney House Washing Jobs, Rules and 2027 Estimates

Job 2027 Estimate How It Is Charged Check Before Booking Rule or Guidance That Applies
House wash, single storey $400 - $700 Fixed price after photos or a visit Method for each wall type Sydney Water allows washing building walls
House wash, two storey $700 - $1,200 Fixed price with access gear named How upper walls are reached NSW work health and safety duties for falls
House exterior wash, any size $400 - $1,200 By storeys and wall area Where the wash water will go Council guidance: only rain in street drains
Fibro or older home Priced on quote After the build year is known Testing of any suspected asbestos SafeWork NSW: no high-pressure water on asbestos
Roof soft wash, whole roof $600 - $2,400 Fixed price Roof material and pitch SafeWork NSW asbestos roof alert
Apartment or townhouse block Priced on quote Arranged by the owners corporation Strata manager's approval Owners corporation maintains common property
Pre-sale package, single storey brick $1,400 - $2,800 Package price Which surfaces are included Paths hosed only where an exemption applies
Pre-sale package, two storey rendered $2,500 - $4,500 Package price Pole or platform access named Fall risk managed under NSW safety law
Minimum call-out $150 - $250 Per visit What counts as a small job Same rules as a full wash
Hourly rate $70 - $130 per hour Time on site Minimum hours Runoff plan still applies

Rules Behind Each Kind of House Washing Job

What is involved
Sydney councils say only rain belongs in the street drain, so wash water needs a plan.
Sydney Water's guidelines allow washing walls, windows, gutters and roofing at any time.
High-pressure water must never be used on asbestos products such as old fibro sheeting.
In strata schemes the owners corporation looks after external walls.
Prices in this table are 2027 estimates for Sydney, so check the method, runoff plan and insurance before work starts.

House Washing in Sydney's Older and Newer Suburbs

A house wash in Sydney can mean anything from rinsing the eaves of a brick veneer home to treating mould on a rendered two-storey wall. The right method depends on what the walls are made of, how old the paint is and how close the house sits to its neighbours. How to tell cladding types apart, and when a wash is no longer enough, is set out in our NSW house washing guide, while this page deals with hiring in Sydney. Wall type, council drain rules, Sydney Water's guidelines and strata rules all affect how a Sydney house wash should be done. Prices get only a short section here, and you can see how each job is priced in the Sydney house washing cost guide.

Before you contact anyone, stand back from each wall and note where the dirt, mould or salt crust is worst. Photograph the eaves, which are the undersides of the roof overhang, along with window frames, downpipes and any flaking paint. Write down the build year if you know it, since older homes can carry asbestos sheeting or lead paint that changes what a cleaner may do. Note where your outdoor taps are and whether wash water would run to a lawn, a garden bed or the street gutter.

Pressure washing sprays water from a pump at high pressure to strip grime from hard surfaces such as concrete and brick. Soft washing uses a low-pressure spray with a cleaning solution that loosens dirt and kills mould, followed by a gentle rinse. Render is a cement or acrylic coating spread over brick or block walls, and it can crack or mark when hit with a strong jet. Dwell time is how long a cleaning solution sits on the wall before the cleaner rinses it off. If a quote uses any term you do not know, ask the cleaner to explain it in writing before you agree to the job.

2027 Estimates for Common Sydney House Washing Jobs

All figures here are 2027 estimates for Sydney, and they are the same ranges shown on our cost page. Washing the walls and eaves of a single-storey house is likely to cost $400 to $700, while a two-storey house comes to $700 to $1,200. Across all house sizes the range runs from $400 to $1,200, priced mainly by the number of storeys and the wall area. Rendered single-storey walls tend to sit at the upper end of the single-storey range, and three-storey or steeply sited homes are priced on quote. For a full explanation of what moves these prices, read the guide to house washing costs in Sydney before you compare offers.

Small jobs such as washing one wall or a single set of eaves fall under a minimum call-out of about $150 to $250. Some businesses charge by time instead, at around $70 to $130 per hour with a minimum number of hours. Roofs are usually quoted on their own, and a soft wash of a whole roof is estimated at $600 to $2,400, with more detail in our roof cleaning guide. Window cleaning, gutter clearing and mould pre-treatment have no published price ranges, so each of them is priced on quote.

Job 2027 Estimate What the Price Covers Ask the Cleaner
House wash, single storey $400 - $700 Walls and eaves Which method for each wall
House wash, two storey $700 - $1,200 Walls, eaves and upper storey access How upper walls are reached
House exterior wash, any size $400 - $1,200 Priced by storeys and wall area Area measured or estimated
Rendered single storey Upper end of $400 - $700 Walls and eaves Pressure used on the render
Roof soft wash, whole roof $600 - $2,400 Roof only Roof material and asbestos check
Pre-sale package, single storey brick $1,400 - $2,800 Driveway, paths, house and roof Order of work
Pre-sale package, two storey rendered $2,500 - $4,500 Same surfaces with pole or platform access Access equipment named
Minimum call-out $150 - $250 One small job What counts as small
Hourly rate $70 - $130 per hour Time on site Minimum hours
Windows, gutters, mould pre-treatment Priced on quote Add-ons Listed as separate lines

Matching the Method to Sydney's Housing Types

Sydney's housing ranges from nineteenth-century and Federation-era terraces in the inner suburbs to inter-war brick bungalows, post-war fibro cottages and newer rendered homes. Each type has walls that react differently to water, pressure and cleaning solutions, so one method rarely suits every street. Face brick, meaning brick left unpainted, usually tolerates a stronger rinse than paint, although older mortar, the paste that binds the bricks together, may be too soft for it. Painted weatherboard and painted render need a gentle approach, because a strong jet can lift paint at joints and edges. Ask each cleaner to name the method for every wall type on your house rather than one method for the whole job.

Brick veneer is the most familiar wall type in many Sydney suburbs, and it means a timber frame with a single outer layer of brick. Near the base of those walls are weep holes, which are small gaps left in the mortar so moisture can drain out of the cavity behind the bricks. Spraying a strong jet straight into weep holes can drive water into that cavity instead of letting it drain away. Window frames, door sills and the gaps around downpipes also need a lighter touch, since water forced in at those points can reach the inside. A careful cleaner will angle the spray downwards along brick veneer walls and keep the nozzle away from these openings.

Fibro, short for fibre cement sheet, covers the walls of many Sydney cottages built after the Second World War, and those older sheets may contain asbestos. Homes built or renovated before 1990 can include asbestos cement, meaning cement sheeting made with asbestos fibres, in walls, eaves, fences and sheds, so a cleaner should ask your build year first. If the age or material is unclear, an asbestos testing and inspection service can confirm what the sheeting is before any washing starts. Newer fibre cement cladding is a different product, and James Hardie makes fibre cement weatherboards such as Linea along with linings for the underside of eaves. Owners of newer cladding can ask the maker for its care guidance, since a cleaner who follows it is less likely to mark the finish. Apartment blocks are handled differently, because the outside walls are usually common property, meaning shared parts of the building, which the owners corporation looks after.

House Type Typical Walls Method to Ask About Extra Care
1800s or Federation-era terrace Face brick or painted render Low-pressure rinse and hand work on detail Soft older mortar, old paint, no side access
Inter-war brick bungalow Face brick with painted trims Rinse after a test patch Older mortar joints and timber trims
Post-war fibro cottage Fibre cement sheeting, often painted No pressure on suspected asbestos Testing before any washing
Weatherboard home Painted timber boards Soft wash and gentle rinse Paint lifting at board edges
Rendered project home Acrylic or cement render, painted Soft wash at low pressure Cracks and textured coatings
Apartment or townhouse block Brick, render or cladding panels Arranged by the owners corporation Access and strata approval

Terraces, Narrow Lots and Homes With No Side Access

Many inner Sydney terraces share walls with the houses on either side and have no path from the street to the back yard. A cleaner may need to run hoses through the hallway, work from a rear lane or carry equipment through the house. Agree beforehand where hoses will run, how floors will be protected and whether the back gate can be opened from the lane. Front walls of terraces often sit close to the footpath, so spray and wash water can reach pedestrians, parked cars and the street gutter. Ask how the cleaner will screen the footpath and collect runoff before it reaches the kerb.

Shared walls mean the neighbours are affected by the job, especially where a fence, a parapet, which is a low wall along a roof edge, or a balcony sits on the boundary. Overspray from a high wall can land on a neighbour's windows, washing or car, and that can quickly lead to a dispute. Tell your neighbours the date and time, and ask whether they would like their windows closed or cars moved. If any part of the work needs access from next door, get the neighbour's agreement before the day rather than on it.

Narrow lots also limit where a ladder can stand, which matters for the upper storey of a two-storey terrace. Many cleaners use a water-fed pole, which is a long extending pole that carries water and a brush up to the wall from the ground. Others bring a small mobile platform, but some laneways and courtyards are too tight for one to fit. Ask which method the cleaner will use on each upper wall and whether any part depends on access through a neighbour's yard. Keeping workers on the ground lowers the risk of a fall and can reduce the time spent setting up ladders.

Access Problem Common Approach What to Agree First
No side path to the back yard Hoses through the hallway or from a rear lane Floor protection and which doors stay open
Front wall close to the footpath Screening and runoff control at the kerb Times when foot traffic is lighter
Upper storey with no room for a ladder Water-fed pole or extension wand from the ground Which walls can be reached this way
Shared wall or parapet with next door Low-pressure work near the boundary Neighbour told the date and time
Courtyard too small for a platform Hand washing of tight corners Extra time listed in the quote

Soft Washing Explained in Plain Terms

Soft washing relies on a cleaning solution to do most of the work, so the water pressure can stay low enough to protect paint and render. Many soft wash mixes contain sodium hypochlorite, the active chemical in household bleach, which kills mould and lightens organic stains. Most mixes also contain a surfactant, which is a soap-like ingredient that helps the solution spread and cling to the wall. After the dwell time, the cleaner rinses the wall with low-pressure water and rinses nearby plants before and after the work. Ask the cleaner to name the product and its strength, because a mix strong enough for a roof may be too harsh for painted walls.

Pressure washing is still useful on parts of a house, mostly hard paths, unpainted concrete and some face brick. The risk comes from holding a strong jet close to a soft or painted surface, where it can scar render, wash mortar out of the joints or force water behind cladding. A careful cleaner will test a hidden patch first and adjust the nozzle and distance before working across a whole wall. If a cleaner plans to use the same pressure on every surface, ask why before you agree.

Makers of cleaning chemicals publish a safety data sheet, called an SDS, that lists hazards, protective gear and first aid steps. 30 Seconds makes House Wash, Outdoor Cleaner and Roof Treatment, and its website has a section for these safety data sheets. You can ask your cleaner which product they will use and read its SDS before the day. Pay attention to what the sheet says about plants, pets, fish ponds and contact with eyes or skin. Keep children and animals inside until the walls and paths have been rinsed and are dry.

Soft Washing Terms in Plain Words

Term
What it means
Soft wash
Low-pressure spray with a cleaning solution, then a gentle rinse
Sodium hypochlorite
The active chemical in bleach, used to kill mould
Surfactant
A soap-like ingredient that helps the mix cling
Dwell time
How long the solution sits before rinsing
Test patch
A small hidden area washed first to check for damage
SDS
The maker's safety data sheet for a chemical
A cleaner who cannot name the product in the mix cannot tell you how it affects your plants or paint.

Heritage Brick, Sandstone and Old Paint

Many older Sydney streets sit in heritage conservation areas, and some houses are heritage items, meaning each is listed for protection in its own right. A NSW Heritage Office guide on heritage buildings, published on the website of Ku-ring-gai Council, says brick and stone masonry should be cleaned only to remove harmful substances and reveal deterioration. The same guide recommends a gentle method, such as a low-pressure water spray, and suggests specialist cleaners for stains that are hard to remove. That advice suits sandstone sills, soft old bricks and older mortar, which is often softer than modern cement mortar. If your house is in a heritage area, ask your council whether any planned cleaning or repair needs approval before work starts.

Some Sydney councils explain their own process for maintenance on heritage homes. The City of Parramatta, for example, says its Heritage Minor Works application is highly recommended when minor work is expected to affect heritage items. Its heritage page also points owners to NSW heritage maintenance guides on paint finishes, plaster finishes and mortars. A plain wash rarely changes how a building looks, but paint removal, mortar repairs or chemical cleaning of masonry can. Ask your council early if the wash is likely to lead to any of that work.

Efflorescence is a white powdery salt that appears on brick or stone as moisture inside the wall dries out. Heavy washing pushes more water into the wall, and the salts can return as the masonry dries. Replacing crumbling mortar, known as repointing, is bricklaying work, and brick repairs and repointing is a separate job from washing. Austral Bricks makes bricks in Australia and publishes construction and cleaning manuals, which a cleaner can check before treating newer face brick.

Painted heritage fronts need extra care because the older paint layers underneath may contain lead. Lead paint was used in most Australian homes built before 1970, according to LeadSmart, the NSW Government guidance on lead safety at home. LeadSmart says wet sanding and wet scraping are the safest ways to prepare a surface that has old lead paint. A wash that blasts loose paint off the wall can scatter flakes across garden beds, paths and the neighbour's yard. If old paint is flaking, consider lead paint testing and removal before any wash rather than after it.

Mould and Algae on Shaded Walls

South-facing walls in Sydney get little direct sun, and walls under trees or beside tall fences can stay damp for days after rain. Those walls often grow black mould or green algae while the sunny sides of the same house stay clean. A plain rinse may remove the surface growth, but a mould treatment is usually needed to kill what is left in the paint or render. Dulux makes Weathershield exterior paint and publishes a guide to treating and preventing mould on painted surfaces. Ask the cleaner which treatment they will use on the shaded walls, and whether it suits the paint on your house.

Wet & Forget makes Moss & Algae Remover, and its site advises rinsing nearby plants with fresh water before and after spraying. The same site says to keep pets away from treated areas until they are fully dry and to patch test a small area first. Mould that keeps coming back on the same wall can point to poor drainage, leaking gutters or plants growing against the house. Trimming shrubs back from the walls and booking gutter cleaning for blocked gutters can slow regrowth after the wash.

Timing matters for a mould treatment, because rain soon after application can wash the solution off before it has worked. Ask the cleaner how long the product needs on the wall and what happens if rain arrives early. Some products keep working after the visit, so ask what result to expect on the day and in the weeks after. Dark marks that remain after treatment may be stains in the paint rather than live mould, and a repaint may be the only fix. Ask the cleaner to point out any such areas before you pay, so you know what the wash could not remove.

Before a Mould Treatment on Shaded Walls

Agree these first
The product name and whether it contains sodium hypochlorite.
How plants, lawns and ponds near the wall will be protected.
How long the solution stays on the wall before rinsing.
Whether a test patch will be done on painted or rendered walls.
Mould that returns within months often has a moisture source that washing alone will not fix.

Salt Spray and Steel Cladding in Coastal Suburbs

Homes near the ocean, from the Northern Beaches to the Eastern Suburbs and Sutherland Shire, collect salt on walls, windows and metal trims. Rain washes much of that salt off the roof, but sheltered spots under the eaves and gutters stay coated. BlueScope makes COLORBOND steel, and its maintenance guidance says areas not washed by rain should be hosed down at least every six months. The guidance names wall cladding under the eaves, the top of garage doors and the underside of eave gutters as areas that need this washing. It also says these areas should be washed more often in coastal areas where marine salt spray is common.

A house wash in a coastal suburb can include this maintenance in the same visit, provided the cleaner knows which steel parts to rinse. The COLORBOND guidance calls for regular washing with clean, fresh water, so ask whether a detergent is needed on the steel parts at all. It also says soil and mulch should not build up against COLORBOND steel products, which matters for garden beds beside cladding and garage doors. Keep a note of the date of each wash so you can track whether those sheltered areas are being washed on schedule.

Salt also settles on window glass, flyscreens and outdoor light fittings, especially on the side of the house facing the sea. A house wash can rinse that salt from frames and sills, but streak-free glass usually needs a separate window clean. Coastal winds also make spray drift more likely, so morning washes on calmer days suit beachside streets. Ask whether the cleaner will rinse outdoor furniture, air conditioning units and barbecues while the hoses are out. Those extras should be listed in the quote so you know whether they are included or charged on top.

What Sydney Councils Say About Wash Water

Greater Sydney is split across many local councils, and several publish plain guidance on what may go into a street drain, the stormwater drain that carries rain to local waterways. The drain is just for rain, according to Northern Beaches Council, meaning only rainwater should go in, and the council lists detergent among the chemicals that pollute waterways. It asks residents to report water pollution and gives a 24 hour line, 1300 434 434, for urgent matters that could harm people or property. The same council says fines apply for pollution incidents and that it may serve notices on people or businesses responsible. A house wash that sends soapy water down the driveway into the kerb can fall into that category.

Residents are asked by North Sydney Council not to let chemicals or detergents run into street drains. It also suggests using a broom rather than a hose on footpaths, because hosing carries dirt and waste into the drains. Ku-ring-gai Council asks residents to sweep driveways and gutters instead of hosing them, so that only water goes down the street drains. If you live in another council area, check its website for similar guidance before the cleaner starts.

A careful house washer will plan where the wash water goes before spraying the first wall. Options include directing runoff onto a lawn, covering the nearest drain and using a vacuum recovery unit, which sucks up water so it can be taken away. Ask what the cleaner will do on your property, given the slope of the driveway and how close the house is to the kerb. More detail on the pollution offence behind wash water is in our Western Sydney pressure cleaner guide. Write the agreed runoff plan into the quote so that both sides know what was promised.

Council What Its Page Says How to Report
Northern Beaches Council Drain is just for rain, detergent listed as a pollutant, fines apply 1300 434 434, 24 hours for urgent matters
North Sydney Council No chemicals or detergents into street drains, sweep footpaths (02) 9936 8100
Ku-ring-gai Council Sweep driveways and gutters, only water down street drains Contact council with the location, time and what you saw
Other Sydney councils Check the council's water pollution page Council's main phone line

Washing Walls Under Sydney Water's Guidelines

Sydney Water's Water Wise Guidelines apply all year to homes and businesses across Greater Sydney. They allow drinking water to be used at any time to wash building structures, including windows, walls, gutters and roofing. A garden hose used for this must have a trigger nozzle, which shuts off the water when you let go, unless it is supplying high-pressure water cleaning equipment. Paths, driveways and other hard surfaces are treated differently, and may only be cleaned with water for reasons such as safety, health or contamination. When we checked in November 2026, Sydney Water said elevated water restrictions were not in place.

These rules allow the house wash itself, but a cleaner should not hose the driveway down afterwards out of habit. The guidelines also do not permit runoff or overspray onto hard surfaces such as paths. Sweeping the paths once the walls are done keeps the job within the rules and keeps dirt out of the drains. Check the guidelines on the Sydney Water website before booking, since the rules can change if restrictions return.

Activity Allowed Under the Guidelines Condition
Washing walls, windows, gutters and roofing Yes, at any time Hose fitted with a trigger nozzle
Supplying a pressure washer from a hose Yes Trigger nozzle rule does not apply to the supply hose
Hosing paths, driveways and concrete Only in set cases Safety, health, emergency, construction or contamination
Runoff or overspray onto paths No Sweep paths instead of hosing them

Asbestos Sheeting and Upper Walls in Brief

After a 2017 incident involving an asbestos roof, SafeWork NSW warned never to use high-pressure water or compressed air on asbestos products. On a house wash, that warning covers fibro walls, eaves linings, fences and sheds that may contain asbestos cement. A cleaner should keep any suspected asbestos material out of the spray entirely until testing shows it is safe. Painting over asbestos sheeting or removing it are separate jobs, so a washer should not attempt either as part of the visit. There is also a section on asbestos and older homes in our NSW pressure washing cost guide.

Washing the upper storey of a house means working at height, and NSW work health and safety laws require the risk of a fall to be managed. Ground-based tools such as water-fed poles and extension wands, which are long rigid spray poles, remove most of that risk for walls and eaves. Where ladders, scaffolds or platforms are needed, the quote should say which ones and who sets them up. Ask for a certificate of currency for public liability insurance, which shows the policy covering damage or injury during the work is active.

Ask how the cleaner stores and mixes chemicals on site, since concentrated products can burn skin and harm plants. A careful operator mixes solutions in the van or on a hard surface away from garden beds and drains. Eye protection and gloves should be worn while cleaning solutions are being sprayed near the house. Spills of concentrate should be soaked up with an absorbent material rather than hosed into the gutter. Ask what happens to leftover solution at the end of the day. Leftover mix should leave with the cleaner rather than being tipped onto your garden or into a drain.

Checks for an Older Sydney Home

Before the machine starts
Build year of the house, sheds and any additions.
Any fibro walls, eaves, fences or sheds kept out of the spray.
Flaking paint on a house built before 1970 noted in the quote.
Upper walls reached from the ground where possible.
If you are unsure what a wall or eave is made of, have it tested before anyone washes it.

Apartments, Townhouses and Window Glass in Strata

In a strata scheme, the owners corporation, meaning all the lot owners, or unit owners, acting together, must repair and maintain the common property. The NSW Government lists external walls, roofs, driveways and gardens as examples of common property, and lists windows as an owners corporation responsibility. That means washing the outside of an apartment block is normally a decision for the owners corporation or its strata manager, not one owner. A by-law is a rule adopted by the scheme, and your building's by-laws may also set hours, noise limits or approval steps for contractors. Ask your strata manager for the by-laws and any contractor rules before you book anything on the outside of the building.

Window glass is a common exception, because the NSW Government says lot owners handle window cleaning unless they cannot reach the window. Model by-law 11, part of a standard set that residential schemes can adopt, says an owner or occupier must keep clean the glass in windows and doors on the boundary of their lot. That includes any part of the glass that is common property, although your scheme may have adopted different by-laws. Glass that cannot be reached safely from inside or from the balcony becomes the owners corporation's job under that guidance.

Balcony washing raises its own issue, because water and dirt can drip onto the balcony or windows below. Model by-law 9 says an owner or occupier must not throw or deposit rubbish, dirt, dust or other material on the common property. Sweep the balcony first and use a bucket and mop rather than a hose where water could run over the edge. Townhouse complexes often have shared driveways and gardens, so check which areas belong to your lot before you hire anyone. Larger exterior jobs that owners corporations often arrange together are covered on our strata painting and building maintenance page.

If you sit on a strata committee, ask each cleaner for the same details you would want for a house. That means the method for each wall type, the products, the runoff plan and a current insurance certificate. Residents usually need notice so they can close windows, move cars and bring in items from their balconies. The strata manager can send out the dates, working hours and any parking changes before the cleaner arrives. Tall buildings may need rope access, where workers abseil down the walls, or a fixed platform, which are specialist services that cost more than ground-based work.

Area Usually Looked After By What to Check
External walls of the building Owners corporation Strata manager's approval and contractor rules
Roof and gutters Owners corporation Access and insurance for work at height
Window glass you can reach Lot owner or occupier By-laws your scheme has adopted
Window glass you cannot reach Owners corporation Who arranges rope or platform access
Balcony floor Check your strata plan and by-laws Water and dirt dripping to balconies below
Shared driveways and gardens Owners corporation Runoff to drains and parking during the work

Machines and Products Worth Naming in the Quote

Most professional house washers bring a petrol or electric pressure washer, a chemical pump for soft washing and a set of nozzles. Kärcher makes pressure washers for home and professional use, including petrol high pressure washers. Gerni makes high pressure washers such as its 3300, 5000 and 7300 models, and STIHL makes pressure washers and accessories as well. The brand matters less than whether the operator can turn the pressure down and switch to a wide fan nozzle, which spreads the spray more gently, on painted walls. Ask what pressure and nozzle will be used on each surface, and whether a soft wash pump will be on the truck.

Cleaning products should be named in the quote, along with where they will be used. Selleys makes Sugar Soap, and Dulux lists it among the tools for preparing exterior surfaces before painting. Cabot's makes Deck Clean and an Exterior Cleaner for timber, which matter if the wash includes a deck or timber screens. Rockcote makes coloured render and textured coatings, and owners of rendered homes can contact the maker for care advice on their finish. Write the product names onto the quote so that you can read the labels and safety data sheets yourself. If the cleaner plans to use a product the maker does not recommend for your wall finish, ask them to explain the choice.

Tool Where It Suits Where to Take Care
Pressure washer with fan nozzle Concrete paths and sound face brick Painted walls, render and weep holes
Soft wash pump Painted walls, render, weatherboard and mould Plants and ponds near the wall
Water-fed pole Upper walls, eaves and glass from the ground Heavy grime that needs scrubbing
Extension wand Second-storey eaves and gutters' outer faces Overspray onto neighbouring property
Soft brush and bucket Small areas and delicate trims Large walls where it adds time

Equipment and Product Details to Confirm

Item
What to confirm
Pressure washer
Pressure setting and nozzle for each wall
Soft wash mix
Product name, strength and dwell time
Mould treatment
Label directions for plants and pets
Timber cleaner
Rinse method and drying time
Hand cleaner for small areas
Where it will be used instead of a spray
If a quote says only chemical wash, you have no label to check the product against.

Getting the House Ready Before the Cleaner Arrives

A little preparation the day before a wash makes the job faster and lowers the chance of damage. Close every window and sliding door, and check that weather seals are in place, since water can be driven past worn seals. Move outdoor furniture, pot plants, bikes and doormats away from the walls, and park cars out of the spray zone. Tell the cleaner about outdoor power points, lights, air conditioning units and security cameras so they can be covered or avoided. Leave gates unlocked, keep pets inside and show the cleaner where the outdoor taps are.

Most house washers connect to your outdoor tap, so check that it works and does not leak before the day. Ask whether the cleaner needs a power point for an electric machine or brings a petrol unit instead. If the tap is far from the walls, the cleaner may bring longer hoses or a water tank, which can affect the price. Unit and townhouse residents should check whether the strata scheme allows contractors to use a common property tap. Let the cleaner know about any parking limits in your street, since a van with hoses needs to stop close to the house. Clear access to the side gate, bins and garden taps saves time that would otherwise be charged.

Sydney weather affects the timing of a wash, so ask the cleaner what they do if strong wind or heavy rain is forecast. Wind can carry spray and cleaning solution onto a neighbour's property, and hot sun can dry a solution before it is rinsed off. A cleaner who works the shaded side first in hot weather, or reschedules in strong wind, is protecting your walls and plants. Agree in writing whether a weather delay changes the price or simply moves the date.

The Day Before a House Wash

Checklist
Windows and sliding doors closed, with seals checked.
Furniture, pot plants and doormats moved away from the walls.
Outdoor power points, lights and cameras pointed out to the cleaner.
Cars parked away from the house and the footpath.
Neighbours told the date and time of the work.
Water forced past a worn window seal can damage plaster and carpet inside the house.

After the Wash: Inspection, Drying and Upkeep

Walk around the house with the cleaner at the end of the job, before they pack the machine away. Look for streaks under windows, missed patches under the eaves and any marks on render, paint or timber. Check that window frames, sills and nearby paths have been rinsed of cleaning solution. Photograph any damage you find and raise it straight away, while the cleaner is still on site. Keep the quote, invoice and photos together in case a problem shows up after the walls dry.

Walls usually need to dry completely before any painting starts, and the painter should confirm the drying time for their paint system. If the wash revealed cracked render, gaps in the mortar or flaking paint, book those repairs before the next wash. You can arrange render repairs or exterior house painting once the walls are clean and dry. Many owners book window cleaning soon after a wash, since rinse water can leave marks on the glass. In coastal suburbs, regular hosing of sheltered steel areas between full washes follows the COLORBOND guidance noted above. Writing down the date and method of each wash gives the next cleaner a useful starting point.

Walk-Around After a House Wash

Check before the cleaner leaves
No streaks under windows or missed patches under the eaves.
No marks, lifted paint or bare patches on render or timber.
Window frames, sills and paths rinsed of cleaning solution.
Plants rinsed and no soapy water left in the street gutter.
Damage photographed before the cleaner leaves is far easier to raise than damage found a week later.

What to Look Out For When Hiring a Sydney House Washer

An offer to pressure wash every wall at full strength is a warning sign, especially on painted, rendered or older homes. So is a cleaner who does not ask about the build year, since that question protects both of you from asbestos and lead risks. Be wary of a quote that says only house wash with no list of walls, eaves, windows or gutters. A price that seems low may leave out runoff control, plant protection or the upper storey. Ask for an ABN, the Australian Business Number, which you can check on the Australian Business Register website, and a current certificate of public liability insurance.

A same-day offer at your door leaves little time to check insurance or ask about methods. Take the business details, say you will compare quotes and check the business before agreeing to anything. A cleaner who refuses to put the method, products and runoff plan in writing makes those promises hard to enforce later. Paying in full before the work is done makes it harder to have unfinished work completed.

Watch the first test patch on the day, and stop the job if paint lifts or render marks. A good cleaner will adjust the method or move to a hand wash rather than carry on as before. Keep children and pets clear of the work area until the cleaner says it is safe. If the cleaner sends soapy water into the street drain despite the agreed plan, ask them to stop and use the method in the quote. Raise any damage with the business in writing first, attaching photos and a copy of the quote.

Warning Signs in a House Washing Offer

What to watch for
An offer to blast fibro walls, eaves or an old roof with high-pressure water.
No question about the build year or the wall materials.
No plan for wash water near a street drain or the kerb.
No certificate of currency for public liability insurance.
A cheap wash that strips paint or floods a room can cost far more than the price difference.

Getting House Washing Quotes That Can Be Compared

Send every cleaner the same details so the quotes describe the same job. Include your suburb, the number of storeys, the wall materials on each side and the build year if you know it. Add photos of the worst walls, the eaves, any mould and any flaking paint, plus the location of taps and drains. Say whether the property is in a strata scheme or a heritage area, and whether neighbours share a wall or driveway. List extras such as windows, gutters or a roof wash as separate items so each can be priced on its own.

When the quotes come back, check that each one names the method for each wall type and the products to be used. Look for a runoff plan, the access equipment for upper walls and the insurance details. Compare the prices with the 2027 estimates on this page and with our NSW pressure cleaning guide. A quote far below the others may have left something out, so ask what it covers before you choose it.

Timing matters if the wash is part of getting a home ready for sale or a new lease. Book the wash early enough that any repairs it reveals can be done before photos are taken. Leave time for walls to dry if a painter is booked to follow, and confirm the order of work with both businesses. Ask each house washer how far ahead they are booked, since busy periods can push dates back. A written start date and an expected finish time help you plan around children, pets and parking. If the cleaner needs to return for missed areas, agree that return visit in writing at no extra charge.

If your home also needs indoor work, see our Sydney tile and grout cleaning guide for bathrooms, kitchens and outdoor tiles. For a pre-sale clean, ask whether the driveway, paths, roof and house walls can be done in one visit. A single visit can cut set-up time, and you can see how package prices compare in the Western Sydney pressure cleaning cost guide. Post your job on The Quote Yard with the details above, and local Sydney house washers can quote on the same job. Choose the cleaner whose method, runoff plan and insurance suit your house, not just the one with the lowest price.

House Washers Across Sydney

House washing estimates on this page apply across Sydney, from inner suburbs with terraces to the coast and the outer suburbs. Two-storey homes, narrow lots and strata blocks can cost more where the cleaner needs access equipment, approval or extra runoff control.

▶ Sydney 30 areas
Sydney CBD Parramatta Blacktown Penrith Liverpool Bankstown Hurstville Sutherland Cronulla Kogarah Rockdale Marrickville Randwick Bondi Manly Chatswood Hornsby Ryde Epping Castle Hill Baulkham Hills Rouse Hill Kellyville Macquarie Park Strathfield Burwood Auburn Fairfield Campbelltown Camden
▶ Central Coast 24 areas
Gosford Erina Terrigal Wamberal Avoca Beach Kincumber Woy Woy Umina Beach Ettalong Beach Wyong Tuggerah The Entrance Long Jetty Bateau Bay Toukley Budgewoi Lake Munmorah Warnervale Wadalba Kariong Somersby Narara Niagara Park Saratoga
▶ Blue Mountains 22 areas
Katoomba Leura Wentworth Falls Blackheath Mount Victoria Medlow Bath Bullaburra Lawson Hazelbrook Woodford Linden Faulconbridge Springwood Winmalee Valley Heights Warrimoo Blaxland Glenbrook Lapstone Mount Riverview Mount Wilson Megalong Valley
▶ Illawarra 30 areas
Wollongong Fairy Meadow Figtree Mount Keira Mount Ousley Corrimal Bellambi Woonona Bulli Thirroul Austinmer Coledale Helensburgh Port Kembla Warrawong Berkeley Dapto Kembla Grange Albion Park Shellharbour Oak Flats Flinders Kiama Gerringong Minnamurra Jamberoo Shell Cove Stanwell Park Coalcliff Unanderra
▶ Southern Highlands 24 areas
Bowral Mittagong Moss Vale Burradoo Berrima Bundanoon Exeter Sutton Forest Robertson Kangaloon Fitzroy Falls Welby Braemar Willow Vale New Berrima Colo Vale Yerrinbool Hill Top Balmoral Village Bargo Wingello Penrose Marulan Goulburn
▶ South Coast 28 areas
Nowra Bomaderry Berry Kangaroo Valley Shoalhaven Heads Culburra Beach Callala Bay Huskisson Vincentia Sanctuary Point St Georges Basin Sussex Inlet Ulladulla Milton Burrill Lake Batemans Bay Malua Bay Moruya Tuross Head Narooma Bodalla Bermagui Cobargo Bega Tathra Merimbula Pambula Eden

Sydney House Washing FAQ

Is soft washing or pressure washing better for a Sydney house?
Soft washing suits painted walls, render, weatherboard and anything with mould, because it uses a cleaning solution and low pressure. Pressure washing suits hard surfaces such as concrete paths and some unpainted face brick. Most houses need both methods on different surfaces, so a good quote names the method for each wall. Ask for a test patch on a hidden area before the cleaner works across a whole wall.
Can a fibro house in Sydney be washed?
SafeWork NSW warns never to use high-pressure water or compressed air on asbestos products. Fibro on homes built or renovated before 1990 may contain asbestos, so it should be tested before any washing. If testing confirms asbestos, the cleaner should keep that material out of the spray entirely. Any work on the sheeting itself is a separate job for an asbestos specialist, not a house washer. A cleaner who offers to clean fibro with high-pressure water without asking the build year is a warning sign.
Am I allowed to wash my house under Sydney Water's rules?
Yes, the Water Wise Guidelines allow drinking water to be used at any time to wash windows, walls, gutters and roofing. A garden hose must have a trigger nozzle unless it is supplying high-pressure cleaning equipment. Hosing paths and driveways is only allowed for reasons such as safety, health or contamination. Check the Sydney Water website before booking, because the rules can change if restrictions are introduced.
Where should the wash water from my house go?
Councils such as Northern Beaches, North Sydney and Ku-ring-gai say only water should go down street drains. Detergent and dirty runoff should be kept out of the kerb and the nearest drain. A cleaner can direct runoff onto a lawn, cover the drain or collect water with a vacuum recovery unit. Ask for the runoff plan in writing before the work starts, so you can check it on the day.
Who arranges a wash for an apartment building?
The owners corporation must repair and maintain common property, which includes external walls. Washing the outside of the building is normally organised by the strata manager or strata committee. Lot owners usually clean the window glass they can reach, under model by-law 11 and NSW Government guidance. Check your scheme's own by-laws, since some schemes have adopted different rules. Speak to your strata manager before booking any work on the outside of the building.
How do I protect my garden during a house wash?
Ask the cleaner to wet plants with fresh water before the cleaning solution is applied and to rinse them again afterwards. Wet & Forget gives this advice for its own product, and other product labels give similar directions. Move pot plants away from the walls and cover fish ponds near the house. Keep pets inside until treated areas are fully dry.
Can a terrace with no side access be washed?
Yes, but the cleaner may need to run hoses through the house or work from a rear lane. Agree where hoses will go and how floors will be protected before the day. Upper walls are often reached with a water-fed pole from the ground when a ladder has no room to stand. Tell your neighbours, since shared walls and narrow yards mean spray can reach their property. Ask how runoff will be kept out of the street gutter when the front wall sits close to the footpath.
Will washing damage my heritage brickwork or sandstone?
It can if the pressure is too high, because older brick, stone and mortar are often softer than modern materials. A NSW Heritage Office guide advises cleaning masonry only to remove harmful substances and reveal deterioration. The guide recommends a gentle method such as a low-pressure water spray. If your house is in a heritage area, ask your council whether any planned work needs approval.
What should a Sydney house washing quote include?
It should list each wall, the eaves and any extras such as windows, gutters or the roof as separate items. It should name the method and product for each surface, along with the runoff plan. For two-storey homes, it should say how upper walls will be reached and who supplies the access equipment. Ask for the ABN and a current certificate of public liability insurance with the quote. Compare the total with the 2027 estimates on this page before you accept.
What should I do if the wash damages my paint or render?
Stop the work as soon as you see paint lifting or render marking, and ask the cleaner to change the method. Photograph the damage while the cleaner is still on site. Raise the problem with the business in writing, attaching the photos and a copy of the quote. Keeping the quote, invoice and photos together makes the complaint easier to follow up.

House Washing Specialists in NSW

For Trades & Contractors - NSW

House washing in Sydney often shows up work for other trades. A clean wall makes cracked render, gaps in old mortar and worn paint easy to see, and roof or gutter faults often appear during the same visit. Businesses in these trades can find NSW job listings below.

Compare Sydney House Washing Quotes

Tell us your suburb, the number of storeys, the wall materials, the build year and any strata approval needed. You can then compare quotes from local Sydney house washers who are all pricing the same job.

Get Free House Washing Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 19 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All NSW tradies are required to hold appropriate licences. Verify at NSW Fair Trading.
Prices are 2027 estimates based on typical Sydney house washing rates. Your final price will depend on the number of storeys, wall area and materials, access, mould or salt build-up and how wash water is handled, so compare written quotes that list each item separately.
Need work done? Get free quotes. Post a Job – It's Free