Pricing a House Wash in Sydney?
Tell us your suburb, the number of storeys, the cladding on each wall, the build year and any extras such as windows, gutters or the roof. We send that job description to local house washing operators, so each quote covers the same work.
Sydney House Washing Price Guide
These are 2027 estimates for Sydney homes during normal weekday hours. Your price depends on storeys, wall area, cladding, access, the amount of growth and any extras added.
House Washing Cost Sydney NSW - Get Local Quotes
House washing prices across Sydney are set mainly by the number of storeys, the wall area and the cladding on the house. Our 2027 estimates put a single-storey wash of walls and eaves, the roof overhang, at $400 to $700 and a two-storey home at $700 to $1,200. A narrow Paddington terrace, an unpainted brick bungalow in Ryde and a rendered two-storey home in the Sutherland Shire can each land at a different point in those ranges. Access comes next, because a terrace with no side passage or a sloping block in the Hills can need hoses run through the house or a powered lifting platform hired. Render, the cement coating on many walls, and painted weatherboard need a soft wash, which uses a cleaning solution and low-pressure water, and that slower method can lift the price. Homes built before 1990 may have fibro walls or eaves made of asbestos cement sheeting, which need checking before any quote is accepted. Mould on shaded south-facing walls and iron lace balconies on older terraces need extra hand work, and that time appears in the quote. Windows, gutters and a roof soft wash are usually priced as separate lines rather than included in the house wash price. Hourly work runs at an estimated $70 to $130, and small jobs can attract a minimum charge of $150 to $250. All figures here are 2027 estimates for weekday work on homes in fair condition, so check each one against the written quotes you receive. Post your job on The Quote Yard and we will connect you with local house washing operators across Sydney who can quote on it.
At a Glance - Sydney House Washing Prices 2027
| Job | Price Range | Charging Basis | What Changes the Price in Sydney | Who Quotes It |
|---|---|---|---|---|
| House wash, single storey | $400 - $700 | By wall area | Cladding, eaves and side access | House washing operator |
| House wash, two storey | $700 - $1,200 | By wall area and storeys | Poles, ladders or a platform | House washing operator |
| House wash, any size | $400 - $1,200 | By storeys and area | Size and layout of the home | House washing operator |
| Rendered single storey | Upper end of $400 - $700 | By wall area | Soft wash time on textured walls | House washing operator |
| Three storeys or steep site | Priced on quote | Inspection or photos | Platform or specialist access | House washing operator |
| Roof soft wash, tiled | $800 - $2,400 | By roof area and pitch | Storeys, pitch and growth | Roof or house washing operator |
| Double driveway | $300 - $650 | Fixed per driveway | Condition and soiling | Pressure cleaner |
| Paths and paving | $150 - $450 | By area | Paver joints and edges | Pressure cleaner |
| Fence | $120 - $400 per side | Per side | Length and fence material | Pressure cleaner |
| Pre-sale package, single storey | $1,400 - $2,800 | Fixed per job | Number of surfaces included | House washing operator |
| Pre-sale package, two storey | $2,500 - $4,500 | Fixed per job | Pole or platform access | House washing operator |
| Windows and gutter clearing | Priced on quote | Separate lines | Number of windows and height | Window or gutter cleaner |
| Hourly work | $70 - $130 per hour | Per hour | Small or uncertain jobs | House washing operator |
| Minimum call-out | $150 - $250 | Per visit | A single wall or extension | House washing operator |
What Lifts a Sydney House Washing Price
Budgeting for a House Wash in Sydney
A house wash in Sydney is priced on the outside walls, the eaves, meaning the roof overhang above the walls, and anything else the operator agrees to clean during the same visit. Storeys and wall area set the starting figure, and the cladding, meaning the outer wall material, the access around the house and the amount of mould or grime move it up or down. Our 2027 estimates come from the statewide figures in our NSW pressure washing cost guide, and we have not added a Sydney premium to them. Operators in the Inner West, the Eastern Suburbs, the Northern Beaches, the Hills and the south of the city quote against the same ranges. Differences between suburbs mostly come from the housing itself, such as narrow terraces, sloping blocks and older fibro cottages clad in cement sheeting that may contain asbestos.
Every figure on this page is a 2027 estimate for weekday work on a house in fair condition. Heavy growth, difficult access or a request for extra surfaces will push a quote above the lower end of each range. For the cladding types and wash methods behind these prices, read our guide to house washing in NSW. Use the ranges to judge whether a quote is reasonable, then compare the line items to see where two operators differ.
House Washing Prices by Storey for 2027
A single-storey house wash covering walls and eaves is estimated at $400 to $700 in 2027. That figure assumes reasonable access, meaning a clear side path and parking nearby, on a brick veneer or similar home, built as a frame with one outer layer of brick. Two-storey homes are estimated at $700 to $1,200, and most of the extra cost comes from the equipment needed to reach the upper walls. Across all sizes, our NSW pages put an exterior house wash at $400 to $1,200, priced by storeys and area. Three-storey homes and houses on steep sites sit above the two-storey range, and we have no published price range for them. For those homes, operators price the job after an inspection or from detailed photos.
Rendered walls tend to sit at the upper end of the single-storey range, according to our NSW house washing guide. Render is a cement-based coating trowelled over brick or blockwork, and its rough texture holds dirt and needs a gentler wash. Weatherboard, fibre cement sheeting made from cement and wood fibre, and face brick have no separate figures, so each is priced on quote within the storey ranges. Hourly pricing at an estimated $70 to $130 is more common for small areas or for work whose size is hard to judge in advance. A minimum charge of $150 to $250 can apply when the job is a single wall or a small rear extension.
Roof soft washing, which uses a cleaning solution and low-pressure water instead of a strong jet, is a separate item estimated at $600 to $2,400. For a tiled roof in Sydney the published range is $800 to $2,400, set by roof area, pitch and storeys. Pre-sale packages that add the driveway, paths and roof to the house wash come to $1,400 to $2,800 for a single-storey brick home. A two-storey rendered home needing pole or platform access is estimated at $2,500 to $4,500 for the same package.
| Job | Sydney Estimate 2027 | Charging Basis | Main Price Factor |
|---|---|---|---|
| House wash, single storey | $400 - $700 | By wall area | Cladding and access |
| House wash, two storey | $700 - $1,200 | By wall area and storeys | Equipment for upper walls |
| House wash, any size | $400 - $1,200 | By storeys and area | Size of the home |
| Rendered single storey | Upper end of $400 - $700 | By wall area | Texture and paint condition |
| Three storeys or steep site | Priced on quote | Inspection or photos | Platform or rope access |
| Roof soft wash, tiled | $800 - $2,400 | By roof area and pitch | Storeys and growth |
| Pre-sale package, single storey | $1,400 - $2,800 | Fixed per job | Number of surfaces |
| Pre-sale package, two storey | $2,500 - $4,500 | Fixed per job | Pole or platform access |
| Hourly work | $70 - $130 per hour | Per hour | Small or uncertain jobs |
| Minimum call-out | $150 - $250 | Per visit | Single walls |
| Windows and gutter clearing | Priced on quote | Separate lines | Number and height |
Terraces, Semis, Bungalows and Townhouses
Sydney's older inner suburbs have many terraces, which are narrow houses joined to their neighbours on one or both sides. On a terrace only the front facade and the rear walls are washed, so the wall area is small even when the house has two storeys. Access is the harder part, because many terraces have no side passage and hoses or equipment must come through the house or from a rear lane. A two-storey terrace is still measured against the two-storey range of $700 to $1,200, with wall area and access deciding where it lands. Front balconies with decorative iron lace take longer to clean by hand, which can add time to an hourly quote.
Semi-detached homes share one wall with the house next door, which leaves three sides to wash. Inter-war brick bungalows, built in large numbers between the two world wars, are usually single storey with wide eaves and face brick walls. Face brick means bare brick left unpainted, and it usually handles washing well when the mortar between the bricks is sound. Post-war fibro cottages need an asbestos check before any wash, which is covered further down this page. Rendered and painted homes, from updated older houses to newer project homes, need a lower-pressure method that takes longer. Each of these types falls within the single or two-storey range, and the quote should name the cladding it assumes.
Federation homes, built around the start of the twentieth century, often have timber fretwork, decorative boards at the roof peaks and verandah posts that need hand cleaning. Those details take longer than flat walls, and an operator may quote extra time for them even on a single-storey house. Californian bungalows from the 1920s and 1930s add deep porches and tapered brick piers with many corners to clean around. Each feature is small, but together they can move a quote from the lower half of the range to the upper half. Pointing out these features in your job description and photos means every operator allows the same time for them.
Townhouses and apartments are a different case, since the outside walls usually belong to all the owners in the strata scheme together. A single owner cannot normally book a wash of those walls, and the strata section below explains why. Freestanding homes on sloping blocks, common around the harbour and the Northern Beaches, can need extra ladders or a platform on the low side. Photos of every side of the house help operators price these differences without a site visit.
| House Type | What Gets Washed | Usual Price Range 2027 | What Lifts the Price |
|---|---|---|---|
| Terrace, two storey | Front facade and rear walls | $700 - $1,200 | Access through the house or lane |
| Semi-detached, single storey | Three outside walls | $400 - $700 | Work near the shared boundary |
| Brick bungalow | Walls and wide eaves | $400 - $700 | Eaves depth and growth |
| Fibro cottage | Only after an asbestos check | Priced on quote | Testing and method limits |
| Rendered two storey | Walls, eaves and balconies | $700 - $1,200 | Soft wash and access |
| Sloping block | Walls on the low side | Priced on quote | Platform or extra ladders |
| Townhouse or unit block | Common property walls | Priced on quote for the scheme | Owners corporation approval |
Second Storeys, Ladders and Work Platforms
Height adds cost because the operator has to work safely at the upper walls and eaves. Guidance from SafeWork NSW says a business must protect workers from a fall from one level to another, whatever the height. Its preferred order is to work from the ground, then to use fall prevention such as scaffolding or an elevating work platform, which is a powered lifting platform. Safety harnesses come last, used only when those safer options cannot reasonably be used. Many operators wash upper walls from the ground with extension poles, which keeps the price closer to the lower end of the two-storey range.
Where poles cannot reach, the quote may include ladder work or the hire of a platform. For extension ladders, SafeWork NSW advises securing the ladder at the top and bottom where possible and having it extend at least one metre past the landing. We have no published price for platform hire, so it should appear as its own line with the number of days. The pre-sale estimate of $2,500 to $4,500 for a two-storey rendered home already allows for pole or platform access.
Ground conditions around the house also affect the access cost of a wash. Garden beds, pools and steep side paths can stop a platform getting close, which pushes the work back to ladders or poles. A narrow side passage with air conditioning units and gas meters slows every move of the hose and the ladder. Mention these details in your job description, along with any upper balconies the operator can work from. Quotes that state the access method can be compared directly, while quotes that leave it out may change once the operator arrives.
Access Items on a Sydney House Washing Quote
Brick, Weatherboard, Fibre Cement and Render
Cladding is the outer skin of the walls, and each material takes a different amount of time and care to clean. Face brick and brick veneer usually take the most pressure and are the quickest to wash, which keeps them toward the lower end of the range. Painted surfaces of any kind need lower pressure so the coating is not lifted or scarred. Soft washing, where a cleaning solution loosens the dirt and low-pressure water rinses it off, takes longer than a straight pressure wash. That extra time is the main reason render sits at the upper end of the single-storey range.
Fibre cement weatherboards and panels are common on newer homes and extensions around Sydney. James Hardie makes Linea Weatherboard, a pre-primed fibre cement weatherboard, and Axon Cladding, a vertically grooved panel. These boards are painted after installation, so washing them really means washing the paint on top. Timber weatherboards need a gentle method too, because high pressure can force water behind the boards and raise the grain. Rockcote makes coloured renders such as Cerano Hydratech, and Haymes makes Rendertex texture coatings for rendered facades. Ask the operator whether the render maker's data sheet has been checked before any chemical goes on the wall.
BlueScope makes Colorbond steel, a pre-painted steel used for roofing, wall cladding and gutters. Colorbond wall cladding is a separate case, since BlueScope recommends regular washing with clean fresh water. That guidance names fresh water rather than chemical cleaners, which can keep the wash of a steel wall simple. Mixed cladding, such as a brick ground floor with a weatherboard upper level, is common in Sydney and is priced as two methods on one job. A quote should say which method is used on each material, so you can see where the time goes.
Painted brick is common on older Sydney homes that have been updated, and it is washed like any other painted wall. The paint film is the surface being cleaned, so the pressure has to suit the paint rather than the brick beneath. Where the paint is already peeling, a wash can remove more of it than expected and leave bare patches. Those patches may then need a painter, which is a separate cost from the wash. If that happens, you can check typical prices in our guide to brick painting costs.
| Cladding | Usual Method | Price Position 2027 | Check Before Booking |
|---|---|---|---|
| Face brick or brick veneer | Pressure wash at suitable pressure | Lower end of the storey range | Mortar condition |
| Render | Soft wash | Upper end of the storey range | Cracks and paint condition |
| Painted timber weatherboard | Soft wash | Priced on quote within the range | Flaking paint and build year |
| Modern fibre cement | Soft wash | Priced on quote within the range | Paint finish |
| Fibro on a pre-1990 home | No high pressure | Priced only after testing | Asbestos result |
| Colorbond steel | Clean fresh water | Priced on quote within the range | Areas rain does not reach |
Mould, Algae and Grime on Shaded Walls
Walls that get little sun, such as a south side close to a fence, often carry dark mould and green algae. Removing that growth takes a chemical treatment and time to work, which costs more than rinsing off dust. Mould treatment has no separate published price, so it is priced on quote or built into the wash price. Wet and Forget makes Double Bubble House Wash and an exterior moss and mould remover concentrate. 30 Seconds makes House Wash and Spray and Walk Away, an outdoor cleaner sold for use without scrubbing. Ask which product the operator plans to use, and request its safety data sheet, the maker's document on safe handling.
Some operators use sodium hypochlorite, the active chemical in household bleach, on heavy growth before rinsing it off well. Wet and Forget advises rinsing nearby plants with fresh water before and after a surface is treated. The same maker says pets should stay off treated areas until they are completely dry. Ask the operator what result to expect on the day and whether a second visit is included. A follow-up visit is a cost item in its own right, so it should be written into the quote if it is planned.
Sydney homes built close together often have a narrow, shaded gap along one side where mould tends to build up. Operators sometimes price that one wall separately from the rest, because it needs the longest treatment. Overhanging trees add leaf stains and sap to walls and eaves, which can need a second product or more scrubbing. Pruning branches back from the house before the wash lets more light and air reach the wall afterwards. Ask the operator to note any wall that needs extra treatment, so you can see what share of the price it accounts for.
Treatment Lines on a Sydney House Wash Quote
Heavy growth on one shaded wall can cost more than the rest of the house.
A quote that names the product lets you read its label before the visit.
Eaves, Windows, Gutters and the Roof as Extra Lines
The underside of the eaves is usually included in a house wash quote, though it should still be listed. Windows are usually priced separately, since glass needs its own cleaning method to finish without streaks. Windows added to a house wash have no published price, so compare glass prices in our window cleaning cost guide. Gutters are another separate line, because clearing leaves from inside a gutter is a different job from washing its outer face. Gutter clearing prices are set out in our guide to gutter cleaning costs.
BlueScope advises hosing down the underside of eave gutters, wall cladding under eaves and the top of garage doors at least every six months. Rain does not reach those areas, so salt and grime build up there faster than on open walls. A house wash is a sensible time to clean them, and the quote should say whether gutter faces and downpipes are included. Lysaght makes guttering and fascia products in steel, fascia being the roof-edge board that holds the gutter, and steel gutter undersides near the coast are worth listing on the quote. Roof soft washing is the largest add-on, estimated at $600 to $2,400 across NSW and $800 to $2,400 for a tiled roof in Sydney. Size and pitch figures for roofs are set out in our roof cleaning cost guide.
Solar panels, driveways and fences often get added once the operator is on site. A double driveway in good condition is estimated at $300 to $500, and $450 to $650 when heavily soiled. Paths and paving are estimated at $150 to $450, and fences at $120 to $400 per side. Booking these with the house wash shares the call-out, and each surface should still appear as its own line.
Solar panel cleaning is priced by count, with up to 10 panels at $150 to $200, 11 to 20 panels at $200 to $280, and 21 to 30 panels at $280 to $350. Those figures apply where the panels are safe to reach, and a second storey can add to the cost. Read the cleaning section of the panel maker's manual before agreeing to any chemical on the panels. More detail on panel pricing is in our guide to solar panel cleaning costs. Adding panels to a house wash avoids a second call-out, which suits homes where the roof is low and easy to reach.
| Add-On | Sydney Estimate 2027 | How It Is Priced | Note |
|---|---|---|---|
| Eaves underside | Usually inside the house wash | Part of wall area | Check it is listed |
| Windows | Priced on quote | Separate line | Glass method differs |
| Gutter clearing | Priced on quote | Separate line | Different job from washing |
| Gutter faces and downpipes | Priced on quote | Often with the wash | Areas rain does not reach |
| Roof soft wash, tiled | $800 - $2,400 | By roof area and pitch | Storeys and growth |
| Double driveway | $300 - $650 | Fixed per driveway | Condition and soiling |
| Paths and paving | $150 - $450 | By area | Pavers and edges |
| Fence | $120 - $400 per side | Per side | Length and material |
Asbestos and Lead Checks on Older Sydney Homes
Asbestos and lead paint can change what a house wash costs, or whether it should go ahead at all. According to the Asbestos Safety and Eradication Agency, buildings constructed or renovated before 1990 are likely to contain some asbestos. Its examples include asbestos cement cladding for walls, along with roofing, gutters and fencing. SafeWork NSW warns never to use high-pressure water or compressed air on asbestos products, and to use a licensed asbestos removalist. That rules out a normal pressure wash on fibro walls or eaves until the material has been tested.
Testing is a separate cost from the wash, and our guide to asbestos testing and inspection explains how it works. If the sheeting contains asbestos, seek advice from a licensed asbestos professional before any cleaning is booked. Lead paint is the second check, and the City of Sydney says renovating or repainting a home built before 1970 may risk exposure to lead. Paint from the 1950s could contain as much as 50 per cent lead, and a 1 per cent limit began in 1970. Flaking, chalky or damaged old paint can also release lead, so a strong wash that strips loose paint counts as removing it. The council advises getting advice or tests before you try to remove old paint.
Lead testing and removal are priced separately, as set out in our guide to lead paint testing and removal. Where old paint is sound, ask the operator to state the method and how any loose flakes will be collected. Note the build year of the house in the brief so every operator plans for the same checks. A quote that ignores the build year of a pre-1970 home leaves out a cost you may face later.
Checks on Older Homes Before the Wash
Townhouse and Apartment Walls Paid by the Owners Corporation
In a NSW strata scheme, the owners corporation is the legal body made up of every owner, and it looks after common property, meaning the shared parts of the building and grounds. Strata guidance on nsw.gov.au lists external walls, roofs and driveways as examples of common property. It also says the owners corporation or strata committee must repair and maintain that property. A wash of a townhouse block's outer walls is therefore normally booked and paid for by the scheme rather than one owner. Your strata manager or the committee secretary can confirm which parts are common property in your scheme.
Small jobs are usually paid from the administrative fund, which covers day-to-day costs, and larger maintenance comes from the capital works fund, the savings set aside for major repairs, also called the sinking fund. A whole-building wash on a large block can be a major item, especially with platform access and several storeys. All schemes must obtain at least two independent quotes for any work valued at $30,000 or more. A wash of a few townhouses will usually cost far less, but committees can still seek several quotes to compare scope. Prices for a scheme are set on quote, since no published range covers strata buildings.
Owners who want their own balcony or courtyard washed should check which parts belong to their own unit, called a lot, before booking. By-laws, the written rules of each strata scheme, can also set conditions on work hours, equipment and access to common areas. Painting and repairs often follow a wash, and that work is described in our guide to strata painting and building maintenance. For shared driveways and car parks in strata blocks, see the figures for pressure cleaning costs in Western Sydney.
| Area | Usually Booked By | How It Is Priced | Funding Source |
|---|---|---|---|
| External walls | Owners corporation | Priced on quote for the scheme | Administrative or capital works fund |
| Roof and gutters | Owners corporation | Priced on quote | Capital works fund for major work |
| Shared driveway | Owners corporation | Priced on quote | Administrative fund for minor work |
| Lot balcony or courtyard | Check the strata plan | Priced on quote | Owner, if inside the lot |
| Work of $30,000 or more | Owners corporation | Two independent quotes needed | As decided by the scheme |
How Often to Budget for a Wash
How often a house needs washing affects the yearly cost more than any single quote. BlueScope advises hosing the unwashed areas of Colorbond steel at least every six months, and more often in coastal areas where salt spray is common. Homes near the beaches from Manly to Cronulla fall into that coastal group, and paying for two professional washes a year doubles the yearly cost. For a single-storey home, two professional washes a year at $400 to $700 each come to $800 to $1,400. Many owners hose the sheltered areas themselves between professional washes, which keeps paid visits less frequent.
Painted homes also have maintenance terms set by the paint maker. Dulux makes Weathershield exterior paint, and its promise against peeling, flaking or blistering applies when the paint is applied and maintained according to the product instructions. Colour fade and failure of the surface beneath the paint are excluded from that promise. Reading the paint maker's care instructions before a wash helps you choose a method that keeps any guarantee intact.
Setting a regular wash cycle makes the yearly cost easier to plan than a one-off clean after years of build-up. A house left unwashed for a long time can carry heavy growth that needs more treatment, which pushes the first wash toward the top of the range. Later washes on a regular cycle usually need less chemical and less time. Some owners book the house wash once a year and hose the sheltered steel areas themselves in between. Others link the wash to another regular job, such as gutter clearing, so both share one visit. Whichever pattern you choose, ask operators to quote the first wash and a repeat wash separately so the difference is clear.
Washing Frequency Guidance by Surface
Washing Before a Sale or a Repaint
Owners preparing to sell often book a full exterior clean so the house photographs well. The pre-sale estimate of $1,400 to $2,800 for a single-storey brick home covers the driveway, paths, house walls and roof. For a two-storey rendered home with pole or platform access, the same package is estimated at $2,500 to $4,500. Booking every surface in one visit shares the call-out and set-up across the whole job. Allow drying time between the wash and any photography, especially on shaded walls.
A wash before painting is a different job, because its aim is a clean, sound surface for new paint to grip. Some painting quotes include washing as part of preparation, so check yours before paying for a separate wash. Taubmans makes 3-in-1 Prep, a primer, undercoat and sealer for interior and exterior surfaces, which goes on after the wall is clean and dry. Paint prices are set out in our guide to exterior painting costs. Fascia boards and eaves can be washed in the same visit, and their painting costs appear in our eaves, fascia and gutter painting guide. Ask the painter how long the walls must dry before the first coat, and book the wash to suit.
Tiled front verandahs and entry steps on older terraces often look dull beside a freshly washed facade. Those tiles and their grout need a different method from the walls, as explained in our guide to tile and grout cleaning in Sydney. Asking for both at once lets you compare one combined visit with two separate bookings. Each part should still have its own price on the quote you receive.
| Package | Sydney Estimate 2027 | What It Covers | Check For |
|---|---|---|---|
| Pre-sale, single storey brick | $1,400 - $2,800 | Driveway, paths, walls and roof | Roof method named |
| Pre-sale, two storey rendered | $2,500 - $4,500 | Same, with pole or platform access | Access method |
| Wash before painting | Within the storey range | Walls and eaves | Drying time before paint |
| Walls only, single storey | $400 - $700 | Walls and eaves | Cladding stated |
| Walls only, two storey | $700 - $1,200 | Walls and eaves | Upper wall access |
Cheap Washes That Lead to Repair Bills
A low price can cost more later if the wrong method damages the house. High pressure on render can widen hairline cracks and push water into the wall behind. On chalky or ageing paint, a strong jet can strip patches back to the primer and leave the wall needing a repaint. Water forced up under weatherboards or into window frames can lead to swelling and staining inside. Repairing render is a separate trade, priced in our guide to render repairs.
Brickwork on older Sydney homes can have softer mortar than modern brick veneer, and a strong jet can wash it out of the joints. Repointing, which means raking out and refilling those joints, is a much larger cost than the wash itself. Sandstone foundations and sills on older houses in the inner suburbs can also be marked by high pressure. Ask the operator to test a small, hidden area first and to keep the nozzle well back from soft surfaces. A quote that mentions a test patch shows that the operator has considered the surface before starting.
Before work starts, ask for the operator's certificate of currency for public liability insurance, which covers damage to your property, as the insurer's proof the policy is active. Take dated photos of each wall, the paint condition and any cracks, so a later claim has a record behind it. Damage shown in photos taken before and after the job is easier to settle than a dispute based on memory. There is no published price for wash damage, because the repair depends entirely on what was harmed.
Damage Risks by Surface
Domestic Pressure Washers and Professional Rigs
Part of an operator's price pays for equipment that most households do not own. Kärcher makes the K5 Compact, a domestic pressure washer, as well as petrol and professional high-pressure cleaners. Gerni makes the Gerni 7300, rated at 2,320 psi, which means pounds per square inch, a measure of water pressure. Ryobi makes a 2100W pressure washer rated at 2,750 psi, and it also makes a smaller compact model rated at 2,030 psi. Owners weighing a purchase against a booking can read the trade-offs in our guide to pressure cleaning services in NSW.
Operators bring soft wash pumps, chemical tanks, long hoses and extension poles that reach upper walls from the ground. That gear lets them clean a two-storey wall without ladder work, which is part of why the two-storey range is $700 to $1,200. Higher pressure is not always better on a house, since painted and rendered surfaces need gentle treatment. The quote should state the method used on each wall rather than the machine's pressure rating.
Hot water machines heat the water before it leaves the nozzle, which helps lift grease and heavy grime from brick and paving. Painted walls seldom need that heat, so ask why it is included if a house wash quote lists one. Operators who carry their own water tank can work where the outside tap is weak or far from the walls. Ask whether any equipment hire, such as a platform, is charged at cost or with a margin added.
Equipment Behind a Sydney House Wash
Booking Time, Weather and Sharing a Visit
The simplest way to cut the price is to reduce the number of separate visits. Each booking carries travel and set-up time, which is why minimum charges of $150 to $250 exist. Adding the gutters, windows or a path to the house wash usually costs less than booking them on another day. Neighbours with similar homes can ask an operator to quote both houses for the same day. Each house still gets its own price, and the quote should show the area for each one.
Weather affects timing more than price in Sydney. Rain on the day can delay a wash, and strong wind can carry spray and chemicals onto cars and neighbouring houses. Ask how a weather delay is handled, and whether a rebooking fee applies. Clearing garden furniture, pot plants and cars away from the walls before the operator arrives saves paid time on an hourly job. Point out outdoor power points, light fittings and vents so they can be covered before washing. Each of these steps can reduce the time charged without changing the scope.
Booking ahead of a fixed date, such as a sale campaign or a painter's start, gives you time to compare quotes properly. A rushed booking can mean accepting the only operator free that week, whatever the price. Ask each operator how far ahead they are booked and whether a firm date costs more. Leaving a few spare days between the wash and the main event allows for rain delays. Planning the date early costs nothing and can keep the job within the expected range.
| Step | What It Saves | Trade-off | Suits |
|---|---|---|---|
| Bundle gutters and windows | One call-out | Larger single bill | Most homes |
| Book next door on the same day | Travel time | Both homes ready on one day | Terraces and semis |
| Clear the walls beforehand | Paid time | Owner effort | Hourly quotes |
| Wash on a calm, dry day | Rebooking and spray drift | Flexible dates | Two-storey homes |
| Hose sheltered areas between washes | Visit frequency | Regular owner effort | Coastal homes |
Extra Charges Found on the Day
Some costs only appear once the operator starts work on the house. Growth that is heavier than the photos showed, hidden wasp nests or a wall that needs a second treatment can all add time. A clear quote sets out how such extras are priced, such as an hourly rate of $70 to $130 for added work. Ask the operator to call you before doing any work that was not quoted. Written agreement to an extra, even by text message, avoids disputes when the invoice arrives.
Payment terms belong in the quote along with the price. Ask whether a deposit is needed, how much it is and when the balance is due. Paying the balance after you have walked around the house and checked each wall gives you a chance to point out missed areas. Missed patches under eaves or behind downpipes are easier to fix while the operator is still on site. Keep the quote, the invoice and your photos together in case a question comes up later.
Wash water is another item that can be raised on the day, so settle it beforehand. Rules published by Sydney Water let drinking water be used at any time to wash building walls, windows, gutters and roofs. Runoff is a separate matter, and Northern Beaches Council says stormwater drains are for rain only, with fines under the Protection of the Environment Operations Act, the main NSW pollution law. Our guide to hiring a pressure cleaner in Western Sydney explains how operators manage wash water near stormwater pits.
What to Look Out For in a Sydney House Washing Quote
A house washing quote should name the storeys, the cladding on each wall and the method used on each surface. Eaves, gutter faces, windows and any roof work should each appear as included or excluded. For homes built before 1990, the quote should say whether an asbestos check has been made on fibro sheeting. On homes built before 1970, it should also say how old paint will be treated. Access equipment, chemical products and any return visit should be named on separate lines. The total should be clear, with GST, the 10 per cent goods and services tax, shown where the business charges it.
Check the business behind the quote as well as the price. ABN Lookup on the Australian Business Register shows whether the ABN, the Australian Business Number, is active and matches the business name. Ask for the certificate of currency for public liability insurance before any work on upper walls. A price well below the ranges on this page may leave out the soft wash, the access gear or the eaves. Compare each quote line by line with the scope you asked for before you accept the lowest figure.
Lines Every House Washing Quote Needs
A single figure with no storeys, cladding or method listed.
A pressure wash planned for fibro or flaking pre-1970 paint.
Getting Sydney House Washing Quotes That Line Up
Quotes can only be compared when every operator prices the same written brief. Take photos of each side of the house from the street and the yard, with one close-up of the worst growth. List the storeys, the cladding on each level, the build year and any fibro or old paint you know of. Add the access details, such as a rear lane, a side passage, parking and the outside tap. Say which extras you want priced, such as windows, gutters, the roof or the tiled verandah.
Measurements help operators who cannot visit the house before quoting. Pace out the length of each wall at ground level and note the number of storeys on each side. Note any parts of the house built at different times, such as a rear extension clad in a different material. Mark the location of fibro sheeting, old paint and any cracks on a simple sketch of the house. Operators who receive the same sketch and photos will price the same areas and methods. Differences between their totals then come from their rates and access plans rather than guesswork.
Lay the quotes side by side with columns for walls, eaves, extras, access, chemicals and the total. Convert any hourly quote into a total using the stated hours and rate. Quotes that leave out the soft wash or the access equipment will rise once those items are added back. A short note from the dearer operator can explain a gap between two complete quotes. For the steps of hiring an operator and preparing the house, read our guide to house washing services in Sydney. Wider exterior cleaning options are listed on our NSW pressure cleaning page.
House Washing Operators Across Sydney
House washing prices on this page apply across Greater Sydney, from the Inner West and Eastern Suburbs to the Hills, the Northern Beaches and the Sutherland Shire. Terraces without side access and homes on steep blocks can take longer to set up, which can lift the price.
▶ Sydney 30 areas
▶ Central Coast 24 areas
▶ Blue Mountains 22 areas
▶ Illawarra 30 areas
▶ Southern Highlands 24 areas
▶ South Coast 28 areas
Sydney House Washing Cost FAQ
What does it cost to wash a single-storey brick house in Sydney?
Is a two-storey terrace priced like any other two-storey house?
Are eaves and windows included in the house washing price?
Why does a rendered house cost more to wash than a brick one?
Can a fibro house be washed, and does testing add to the cost?
Who pays to wash the outside walls of a townhouse complex?
How often should a coastal Sydney home with Colorbond be washed?
Is it cheaper to buy a pressure washer and wash the house myself?
Should I wash the house before getting painting quotes?
Can the house wash and roof clean be booked together to save money?
Sydney House Washing Specialists
Related Services
For Trades & Contractors - NSW
House washing jobs around Sydney often lead to work for other trades once the walls are clean. Cracked render, tired paint and blocked gutters show up clearly after a wash. These are the services booked alongside house washing in Sydney and around NSW.
Compare Sydney House Washing Quotes
Tell us your suburb, the storeys, the cladding and any extras such as windows or the roof, and compare quotes from local operators who are all pricing the same house.
Get Free House Washing QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.