TV Wall Mounting Costs QLD 2026 - Get Free Quotes

TV Wall Mounting Costs in QLD

Mounting a TV on the wall in Queensland usually costs between $100 and $350 for a standard job, with the figure set by the size and weight of the screen, the type of mount, and the wall it fixes to. A small or mid-size TV on a fixed bracket fixed to a plasterboard wall is the cheap, quick end, while a large screen, a full-motion arm, or a brick, concrete or tiled wall pushes the price up. Where the cabling has to be hidden, or a power point moved, the cost climbs further. It is a job that looks simple but rewards being done properly, because a heavy TV on the wall has to be fixed securely and the cabling done safely.

The bracket and the mounting itself are only part of the story. A good installer fixes the mount into solid structure, sets the TV at the right height and angle, and either conceals or neatly manages the cables, so the finished result is a screen that sits flat, level and secure with no visible clutter. The difference between a tidy professional job and a rushed one shows in whether the TV is fixed to the studs, whether it is level, and whether the cables are hidden or left dangling. That craft is part of what you are paying for.

The part that catches people out is the cabling, and it is worth being clear about from the start. Hiding the HDMI and data cables inside the wall is straightforward and can be done by a handyman, but concealing a power outlet behind the TV is a different matter, because running mains power inside the wall to a new outlet is licensed electrical work that only a licensed electrician may carry out. You cannot simply run a normal power cord through the wall cavity, as that is neither safe nor compliant. Understanding this split between the AV cabling and the licensed power work is the key to a quote that makes sense. It is also the difference between a safe install and a dangerous one.

Queensland's older homes add one more thing to think about. Many older houses across the state, particularly the classic fibro and timber homes, have wall sheeting that can contain asbestos, and drilling into it without care can release fibres, so mounting a TV on that kind of wall calls for caution and, in some cases, a professional to handle it safely. A modern brick or plasterboard home has no such issue. Knowing what your wall is made of is a sensible first step. A good installer will ask and check before drilling.

Across this guide the message stays steady. Fix the mount securely into solid structure, keep the AV cabling tidy and use a licensed electrician for any power work behind the wall, and take care with older fibro walls that may contain asbestos. A wall-mounted TV is safer, tidier and looks better than one on a unit, especially in a household with children. Done properly, it is a quick, affordable job that transforms a room and lasts for years.

Mount Types

Fixed or flat mounts are the simplest and cheapest, and they suit most rooms. A fixed bracket holds the TV flat and close to the wall with no movement, which gives the neatest, lowest-profile look and the most secure fixing, and it is ideal where the TV is at eye level and viewed straight on. It is the most affordable option to buy and to install. For a lounge where everyone sits in front of the screen, it is often all you need.

Tilting mounts add a small but useful adjustment. A tilting bracket lets the screen angle up or down, which is handy when the TV is mounted a little higher than eye level, such as above a fireplace or in a bedroom viewed from bed, so it reduces glare and improves the viewing angle for a modest extra cost. It still sits fairly close to the wall. For a slightly elevated TV, a tilt is a sensible middle ground between a fixed and a full-motion mount.

Full-motion or articulating mounts give the most flexibility and cost the most to fit. A full-motion bracket extends the TV out from the wall and swivels it side to side and up and down, which suits a corner installation, a kitchen or a room viewed from several positions, but the arm carries more weight and leverage, so it must be fixed to solid structure and is more involved to install and to cable neatly. A home theatre setup often uses a full-motion mount to serve an open-plan space. It is dearer to buy and to fit, but for the right room it earns its place. The extra reach and adjustment are what you are paying for.

The mount has to match the TV, which comes down to the VESA pattern and the weight. Every TV has a VESA mounting pattern, the spacing of the fixing holes on the back, and a weight, and the bracket must suit both, so a good installer checks that the mount is rated for your specific screen before fitting it. A mount rated well above the TV's weight is a safe margin worth having. Quality bracket brands such as Sanus, Vogel's and the Australian brand Atdec are built to clear weight ratings. Matching the mount to the TV is a basic but important safety step.

Beyond the three main types, a few specialty mounts suit particular rooms. A ceiling mount drops the TV from above where no suitable wall exists, a motorised mount raises, lowers or swivels the screen at the touch of a button, and a corner mount angles a TV neatly across the corner of a room, each solving a specific layout problem. These are more specialised and cost more to supply and fit. They are worth it where a standard wall mount simply will not work. A home theatre and audio-visual installer can advise whether a specialty mount suits your space. For most rooms, a fixed, tilting or full-motion mount still covers the need.

What Drives the Price

The TV and the mount type are the first drivers. A small or mid-size TV on a fixed bracket is quick and cheap, while a large, heavy screen or a full-motion arm takes more work, heavier fixings and more care to fit level and secure, so the size and the mount together set the base labour. Supplying the bracket, rather than you providing it, adds the cost of the hardware. These are the simplest parts of the quote to understand.

The wall type is the next driver, and it makes a real difference. A plasterboard wall fixed to timber or steel studs is the standard, quick case, but a brick, concrete or tiled wall needs masonry fixings and careful drilling that takes longer, and a wall where the studs are awkwardly spaced can complicate the fixing. A plasterboard wall is the easiest to work with. Knowing the wall type up front helps an installer price the job accurately. It is one of the first things they will check.

Cabling is where the cost can jump, and it splits into two very different things. Concealing the HDMI and data cables in the wall is a modest add that a handyman can do, but installing a concealed power outlet behind the TV is licensed electrical work and a separate, larger cost, because it must be done by a licensed electrician. A recessed power point behind the screen is the tidiest result but the dearest part of the job. Deciding how far you want the cabling hidden shapes the quote. It is worth thinking through before you book.

The location and the home round out the price. An over-fireplace or high mount, an outdoor alfresco setup, or a wall that may contain asbestos in an older home all add time, specialist fixings or extra care, and the number of devices to connect behind the TV adds a little too. A home theatre and audio-visual installer handles the more involved setups. Each of these is a legitimate part of the quote rather than padding. A quote that sets them out lets you compare fairly.

Wall Types and Fixing

Plasterboard is the most common wall, and the golden rule is to fix into the structure behind it. Plasterboard on its own cannot hold a TV, so the bracket must be fixed into the timber or steel studs behind the sheet, or in some cases a solid nogging or a proper structural fixing, because screwing a TV to plasterboard alone will pull out and bring the TV down. A good installer locates the studs and fixes to them. This is the most important part of a safe plasterboard mount. It is also where a rushed job most often goes wrong.

Brick and masonry walls hold a TV well but need the right approach. A solid brick, block or concrete wall gives a very strong fixing, but it needs masonry anchors and careful drilling with the right bit, and on a rendered or tiled masonry wall the surface has to be drilled without cracking it. This is more work than a plasterboard wall and takes longer, which is reflected in the cost. An installer experienced with masonry does it cleanly. It is worth using someone who has done plenty of them.

Tiled walls call for particular care to avoid cracking. Drilling through tile, whether in a kitchen, a bathroom or on a feature wall, needs the correct tile bit and a careful technique so the tile does not crack or shatter, and the fixing behind the tile still has to reach solid structure. A cracked tile is an expensive mistake on a mounting job. A careful installer tapes, marks and drills slowly to protect the surface. A wall repair specialist can make good if a surface is damaged. Getting the drilling right the first time avoids that entirely.

The older fibro wall is the Queensland special case, and it deserves its own caution. Many older Queensland homes have fibre-cement sheeting that can contain asbestos, and unlike brick or plasterboard it is not something to drill into casually, so establishing what the wall is made of before any drilling is essential. A cavity or lightweight wall may also need the right anchor if there is no stud where the TV needs to go. A good installer assesses the wall type before quoting, not after. Knowing the wall is the starting point for a safe fixing, which the next section covers in more detail.

Finding the structure behind the surface is the practical first task on any wall. On a timber-framed plasterboard wall a stud finder locates the studs, which are usually spaced at regular intervals, while a double-brick or rendered masonry wall is solid throughout and takes a fixing almost anywhere with the right anchor. Older Queensland homes vary widely, from timber-framed and fibro to solid brick, so an installer checks what is actually there rather than assuming. Where the studs do not fall where the TV needs to go, a mounting rail or a wider bracket can bridge to the nearest solid fixings. This is routine for an experienced installer. It is exactly the kind of judgement that keeps a heavy TV safely on the wall.

Power, Cabling and Licensing

The most misunderstood part of TV mounting is the difference between AV cabling and power, so it is worth setting out plainly. The HDMI, data and speaker cables that run to the TV are extra-low-voltage AV cabling, and hiding those inside the wall is generally not licensed electrical work and can be done by a handyman or an AV installer. Mains power is a completely different matter. That distinction decides who can legally do which part of the job.

Concealing the power behind the TV is licensed electrical work, full stop. Running mains power inside the wall to a new outlet, or relocating a power point, must be carried out by a licensed electrician, because it involves the fixed wiring of the home and getting it wrong is a fire and shock risk, and electrical safety in Queensland is overseen by the Electrical Safety Office within WorkSafe Queensland, with installations carried out to the wiring standard AS/NZS 3000. This is not a grey area. A licensed electrician is the only lawful choice for the power side.

A common and dangerous shortcut is worth calling out directly. Running an ordinary power cord or power board through the wall cavity to hide it is not safe and not compliant, because flexible cord is not permitted concealed inside a wall, so the correct solution is either an approved in-wall power relocation kit or, better, a recessed power outlet installed behind the TV by a licensed electrician. The tidy, compliant answer is a proper power point where the TV needs it. Cutting this corner risks a fire and voids insurance. It is precisely the part not to improvise on.

Planning the cabling before you mount saves money and mess. Deciding where the power and the AV cables need to go, and whether a new power point is wanted behind the TV, lets the work be coordinated so the wall is opened once rather than twice, and combining the mount with a data cabling run or a new outlet is tidier and cheaper than separate visits. A good installer talks the cabling through with you before drilling. Getting the plan right up front is what delivers the clean, cable-free look. It is worth the few minutes of planning.

Mounting a TV is often the moment to think about the wider setup. Many households take the chance to add network cabling for streaming, tidy away a games console or sound system, or plan for a wall-mounted soundbar, and doing this while the wall is open is far tidier than returning later. Where a home is being set up for automation, the TV is usually part of a broader plan. A smart home automation setup can tie the TV, sound and lighting together. Coordinating it all at once saves opening the wall twice. It is worth raising with the installer if you have wider plans.

Older Homes and Asbestos

Asbestos is a genuine consideration in older Queensland homes, and it is one many people do not think about before drilling. Homes built or renovated before the late 1980s may contain asbestos cement sheeting in walls and eaves, and while it is generally safe when intact and undisturbed, drilling, cutting or breaking it can release fibres that are hazardous to breathe, which is why a wall that might be fibro should never be drilled casually. This is a health and safety matter, not a formality. Establishing what the wall is made of comes first.

Working out whether a wall contains asbestos is not always obvious, and caution is the safe default. Fibre-cement sheeting from that era can look much like modern products, so where there is any doubt about an older wall, it is safest to treat it as if it may contain asbestos until confirmed otherwise, and a sample can be tested if needed. Guidance on asbestos safety in Queensland is available through WorkSafe Queensland. A cautious installer will raise this on an older home rather than drilling blind. It is exactly the kind of care that marks a professional.

How the work is handled depends on the wall and the extent of the drilling. Where asbestos is confirmed, the safe course may be to avoid drilling into it, to mount in a way that fixes to timber structure rather than the sheet, or to have any disturbance handled with the proper precautions and, for larger amounts, a licensed asbestos removalist. General guidance for Queensland homeowners is available through the Queensland Government. A good installer will not simply drill into a suspect wall to get the job done. That restraint is protecting your household's health.

The practical upshot for a homeowner is simple and worth holding onto. If your home is older and the wall may be fibro, mention it when you get a quote, because it affects how the job is approached and is not something to gloss over, and a reputable installer would far rather check than take a risk with asbestos. A modern home rarely raises the issue at all. Being upfront about the age and construction of the home helps the installer plan a safe job. It is a short conversation that protects everyone.

Height and Over-Fireplace

Mounting height is a small decision with a big effect on comfort. The ideal height puts the centre of the screen at roughly eye level when you are seated, so the viewing is comfortable and does not strain your neck, and a good installer will ask where you sit and set the height to suit the room rather than defaulting to a standard measurement. A TV mounted too high is a common regret. Getting the height right is one of the quiet marks of a considered install. It is worth discussing before the bracket goes up.

As a rough guide, the centre of the screen around 1.1 to 1.2 metres from the floor suits many lounges, though the right height always depends on where you sit and the size of the TV. A larger screen can sit a little higher because its centre is further above its base, and a very large TV changes the comfortable height again. The aim is comfortable viewing without tilting your head up or down, whatever the size. A good installer sets it to your room rather than a fixed number. It is worth sitting down and checking the sightline before anything is fixed.

Over-fireplace mounting looks great but has real considerations. Placing a TV above a fireplace is popular for the way it centres a room, but it usually sits higher than ideal eye level, which is where a tilting mount helps by angling the screen down, and heat from the fireplace below has to be considered so the TV is not exposed to temperatures beyond what it is built for. A home theatre installer can advise whether the spot suits a TV. It is worth weighing the look against the viewing height and the heat. Sometimes a slightly different position gives a better result.

The fixing above a fireplace still has to reach solid structure. Whatever the finish over a fireplace, whether plasterboard, render, stone or tile, the bracket must be fixed into the structure behind it, and a masonry or feature surface needs the right fixings and careful drilling as any masonry wall does. This is not a spot to compromise on the fixing given the weight overhead. A careful installer confirms what is behind the finish before mounting. Getting the fixing right matters even more where the TV is high on the wall.

Cable routing over a fireplace needs a little thought as well. Running the AV cables and dealing with the power neatly around or beside a fireplace can be trickier than a plain wall, and where a new power point is wanted, that remains licensed electrical work for an electrician regardless of the location. A lighting or feature update is sometimes done at the same time. Planning the cable path around the fireplace keeps the finished look clean. It is part of a tidy over-fireplace install.

Outdoor and Alfresco Mounting

The Queensland outdoor lifestyle puts a lot of TVs on the patio, and outdoor mounting has its own rules. Alfresco areas, patios and outdoor entertaining spaces are a natural spot for a TV in the Queensland climate, but an ordinary indoor TV is not built to cope with the heat, humidity, moisture and insects outside, so an outdoor-rated TV or a properly protected enclosure is the sensible choice. Outdoor mounting is a specialty rather than a standard job. It is worth using an installer who does them regularly.

Weather, sun and mounting surface all shape an outdoor install. An outdoor TV needs a weather-rated mount and fixings that will not corrode, positioning that avoids direct sun glare and driving rain, and a secure fixing into the patio wall, whether that is brick, render or fibre-cement, so it stands up to the elements and the occasional gust. A weatherproof power point for an outdoor area is licensed electrical work with its own outdoor requirements. Getting the position and protection right is how an outdoor TV lasts. A rushed outdoor job fails quickly in the weather.

Power outdoors is licensed work with extra requirements. Any power outlet in an outdoor or alfresco area must be a suitable weatherproof outlet installed by a licensed electrician, and outdoor electrical work has its own safety rules given the exposure to moisture, so this is firmly a job for a licensed professional. The AV cabling can still be run by an installer, but the power is not negotiable. Keeping the outdoor power compliant protects the household. It is one more reason to plan the outdoor setup properly.

Corrosion and the coast are worth a thought in an outdoor setup. Near the coast, salt air works on fixings and hardware, so quality corrosion-resistant mounts and fixings are worth the extra for an outdoor TV that has to last, and the same care applies to any bracket in a humid, exposed spot. A home theatre and audio-visual specialist can set up outdoor sound to match. Choosing durable hardware suited to the environment pays off over the years. It is the difference between an outdoor setup that lasts and one that rusts.

Screen brightness and glare are the other outdoor consideration worth planning for. The Queensland sun is intense, and a standard indoor TV can look washed out in a bright alfresco area, which is one reason a purpose-built outdoor TV, designed to be far brighter, performs so much better outside. Positioning the screen out of direct sun and glare helps any TV in an outdoor spot. A good installer considers the light through the day when choosing the position. It is worth getting right so the TV is actually watchable outdoors.

Safety and Secure Fixing

A wall-mounted TV is a safety improvement over one on a unit, and that is worth understanding. Falling and tipping televisions are a real cause of injury to young children, and a TV sitting on a lowboy or a piece of furniture can be pulled over, whereas a TV fixed securely to the wall is out of reach and cannot topple, which is one of the strongest reasons to wall-mount in a home with small children. Product safety on this is taken seriously nationally by the Australian Competition and Consumer Commission. A secure wall mount is a genuine safety measure. It is more than a matter of looks.

The security of the fixing is everything, which comes back to the structure. A wall mount is only as safe as what it is fixed into, so the bracket must be anchored to solid timber or steel studs, or to masonry with proper anchors, and never to plasterboard alone, because a mount that pulls out brings a heavy, expensive TV crashing down. This is the core of a safe install. A good installer will not compromise on the fixing to save a little time. It is the one part of the job that must be right.

Matching the mount to the weight is part of the safety picture. Every bracket has a weight and size rating, and it must comfortably exceed the weight of the TV, so an installer who checks the VESA pattern and the weight rating and fits a mount with a safe margin is doing the job properly. An under-rated mount is a hazard no matter how well it is fixed. A handyman experienced in TV mounting knows to check this. It is a quick check that matters a great deal.

A quick post-install check gives peace of mind. Once the TV is up, a careful installer confirms the mount is solid, level and secure, that the cables are tidy and safe, and that a full-motion arm moves freely without stressing the fixing, so you can be confident it will stay put. It takes only a moment but it matters. A reputable installer stands behind the fixing they have made. That assurance is part of using a professional rather than improvising.

Not every TV ends up on the wall, and for those that do not, anti-tip measures still matter. Where a TV sits on a unit or lowboy in a home with young children, securing it to the wall or the furniture with an anti-tip strap greatly reduces the risk of it being pulled over, which is a simple, cheap safeguard worth doing. The same applies to the heavy furniture the TV sits on, which can also be anchored. Wall mounting removes the risk entirely, but a strap is a sensible fallback where mounting is not an option. A furniture setup can be anchored at the same time. It is a small step that protects small children.

Cable Management

Tidy cables are half of what makes a wall-mounted TV look good, and there are a few approaches. The cleanest result hides the cables inside the wall so nothing is visible, while a simpler and cheaper option runs them in a slim trunking or cable cover on the wall surface, and the right choice depends on the wall, the budget and how clean a finish you want. Both are a big improvement on cables left dangling. A good installer will lay out the options for you. It is worth deciding before the TV goes up.

In-wall concealment gives the best look for the AV cables. Running the HDMI and data cables inside the wall cavity and bringing them out behind the TV and behind the equipment leaves a completely clean face with no visible cabling, and this AV work can be done by a handyman or AV installer without an electrician. It suits a plasterboard wall with an accessible cavity. A data cabling specialist can also run network cabling to the TV at the same time. Combining the runs while the wall is open is the efficient way to do it.

The power, as always, is the part that needs an electrician. Where you want the power fully concealed as well, a recessed power outlet behind the TV, installed by a licensed electrician, is the compliant way to achieve it, and this is done alongside the AV concealment for a fully hidden result. A power point behind the screen finishes the clean look. Coordinating the AV and the electrician means the wall is opened once. It is the tidiest and most cost-effective way to a cable-free result.

Surface trunking is the practical, affordable alternative. Where in-wall concealment is not possible, such as on a solid masonry wall, or where you want to keep the cost down, a slim paintable trunking run neatly down the wall hides the cables and can be painted to match, giving a tidy result without opening the wall. It is quick, cheap and reversible. A handyman can fit trunking as part of the mounting job. For many homes it is the sensible balance of tidiness and cost.

TV Mounting Costs Across Brisbane and SEQ

Across Brisbane and the south-east, TV mounting prices are fairly consistent, and the variation comes from the home and the job rather than the suburb. The older inner suburbs have plenty of character homes where fibro walls and older construction call for extra care, while the newer estates have modern plasterboard and brick that mount easily, and apartments and units are common on the coast. A handyman handles most standard mounts quickly. More involved jobs bring in an electrician for the power side.

Older homes are the defining south-east factor on care and cost. The inner suburbs are full of character homes where wall sheeting may be fibro and construction is older, so a careful installer takes the extra step of checking the wall before drilling, which is exactly the diligence you want on that kind of home. A local electrician is brought in where a concealed power point is wanted. An installer who knows the older Brisbane stock reads the wall rather than assuming. That local knowledge is worth having in the character suburbs.

TV Mounting Costs in Regional QLD

In regional Queensland, TV mounting pricing reflects the distance and the climate as much as the job. The outdoor and alfresco lifestyle is strong across the regions, which means more outdoor and weather-rated mounts, the humid tropical north is hard on outdoor hardware, and travel to rural properties can add a cost. A home theatre installer who covers your area is the one to find. Confirming an installer, and a licensed electrician for any power work, service your town matters before you book.

The outdoor lifestyle is the defining regional factor. Across the coastal and northern regions, a great many homes want a TV in the alfresco or patio area, which means outdoor-rated screens, weatherproof mounts and corrosion-resistant fixings, and near the coast the salt air makes the quality of the hardware matter even more. A home theatre and audio-visual installer experienced in outdoor setups is the one to look for. The wet, salty, sun-exposed environment is unforgiving of cheap hardware. Local experience with outdoor mounts shows in the result.

Power and licensing apply the same wherever you are. A concealed or outdoor power point is licensed electrical work whether the home is in Brisbane or a remote property, so a licensed electrician is needed for that part regardless of distance, and in the regions it is worth confirming one is available alongside the installer. A local electrician covers the power side. The rules do not relax with distance from the city. Lining up both trades before you start keeps a regional job smooth.

Travel and availability shape the regional job. A remote property can attract a travel charge, an outdoor-rated TV or a particular mount may take longer to arrive than in a capital city, and it helps to line up the installer and any electrician together to avoid two trips. Planning around these realities keeps a regional job manageable. Confirming that your installer genuinely services your town is the sensible first step. It saves a wasted booking.

What to Look Out For

The clearest thing to check is that the fixing goes into solid structure. A safe mount is fixed to timber or steel studs, or to masonry with proper anchors, never to plasterboard alone, so an installer who is vague about how they will locate and fix to the structure is a warning sign on a job that holds a heavy TV overhead. Ask how they will fix the mount and to what. A professional answers that clearly and confidently.

Be clear about who does the power, because that is the licensed part. Concealing a power outlet behind the TV is licensed electrical work for a licensed electrician, so anyone offering to run mains power inside the wall without an electrical licence, or suggesting a power cord be hidden in the wall cavity, is both unsafe and a warning sign. Ask who does the power side and whether they are licensed. That question sorts a proper operator from a risky one.

On an older home, ask about the wall and asbestos. If the house is older and the wall may be fibro, a careful installer will want to establish what it is made of before drilling, so an installer who is happy to drill into a suspect wall without a thought is a concern. Raise the age of the home yourself if it is older. A wall specialist can advise on a suspect surface. A cautious answer here is the sign of a professional.

Confirm the mount suits the TV and the finish is tidy. Ask that the bracket is rated for your TV's size and weight and VESA pattern, and check how the cables will be managed, because a mismatched mount or a mess of dangling cables lets down an otherwise good job. A handyman experienced in mounting checks the rating as a matter of course. The right mount and tidy cabling are the marks of a complete job. They are worth confirming before the work starts.

Finally, treat a very cheap quote as a question rather than a bargain. A price well below the others may mean fixing to plasterboard rather than the studs, cutting a corner on the power by hiding a cord in the wall, or ignoring a possible asbestos wall, and any of those turns a cheap job into a dangerous or costly one. Insist on a clear scope covering the fixing, the cabling and who does the power. Cheap becomes expensive when a TV falls or a wall is drilled unsafely. It is not the place to chase the lowest number.

What to Look for in a Quote in QLD

A strong TV mounting quote reads as a clear scope rather than a single figure. It should state the TV size, the mount type and whether the bracket is supplied, the wall type and how the fixing will be made, the cable management approach, and, where power is to be concealed, that a licensed electrician does that part, along with a price and a timeframe. With that on paper you can compare installers on the fixing and the cabling, not on a bare number. The detail is where the real comparison lies.

Ask about the fixing and the power, because those are where safety and legality live. An installer who is clear about fixing to solid structure, and about a licensed electrician handling any concealed power, has understood the two things that matter most on this job. One who is vague about either is the one to be wary of. That focus tells you a great deal quickly.

Compare quotes on the whole job rather than the headline rate. A cheaper figure that assumes a simple plasterboard mount, skips proper structural fixing, or leaves the power as an unpriced afterthought is not really cheaper, so it pays to look at the total for the actual job including the wall type and the cabling. Describing your job once on The Quote Yard brings responses from several installers so you can weigh what each includes. On a TV mount, the fixing and the licensed power work are where the value sits.

Confirm the fixing, the cabling, the power and any asbestos care before work begins. Check that the mount will be fixed to solid structure and rated for your TV, that the cables will be managed the way you want, that any concealed power is done by a licensed electrician, and that an older wall is checked before drilling. An installer providing all of this delivers a secure, tidy, safe wall-mounted TV that lasts. You can explore home theatre installation on The Quote Yard and post your job to compare installers across the state.