Gas Heater Due for a Service?

Tell us the heater type, brand and when it was last checked, and we'll connect you with licensed gasfitters near you.

Get Free Gasfitter Quotes

Typical Costs (2027 Estimates)

Gas heater service (per appliance)$100-$200
Gasfitter call-out (business hours)$100-$180
Gasfitter labour (per hour)$90-$180
Flexible gas hose replacement$80-$200
Isolation valve replacement$200-$500
Gas leak detection$150-$400
Carbon monoxide alarm (product)$30-$80

These are 2027 estimates for NSW, and heater parts, new gas lines and flue work are priced separately.

Gas Heater Servicing NSW - Get Local Quotes

Gas heater servicing in NSW means a licensed gasfitter cleaning, testing and checking a heater that is already installed, from wall furnaces and flued room heaters to portable convectors, gas log fires and ducted systems. Under NSW Health advice, a gas heater should be checked at least every two years, and some makers set a yearly interval for their own models. Each service looks at the burner, the gas connection, the hose or fittings and, on flued heaters, the flue pipe that carries exhaust outside. The main danger from a heater that burns poorly is carbon monoxide, a gas you cannot see or smell. For extra warning, NSW Health suggests a carbon monoxide alarm near bedrooms and in rooms with gas heaters. Any gasfitting work in NSW needs a licence whatever it costs, and repairs end with a certificate lodged through BCNSW eCert, the Building Commission NSW online system. Landlords must maintain gas heaters in rental homes, and a broken heater counts as an urgent repair. Ducted units and gas log fires take longer to service than a single room heater, so the price depends on the heater type and access. A service can also find worn hoses, valves or seals. Unflued heaters have no flue and release exhaust into the room, so NSW Health says never to use one overnight where you sleep. Prices here are 2027 estimates for NSW, based on Quote Yard gas fitting price data, and cover servicing, parts and repairs. Post your job on The Quote Yard to compare quotes from licensed NSW gasfitters for heater servicing, safety checks and repairs.

Gas Heater Servicing Across NSW

Licensed gasfitters service wall furnaces, room heaters, gas log fires, portable convectors and ducted systems in homes across Greater Sydney, the Hunter, the Illawarra, the Central Coast and regional NSW. Tell us about your heater, and we can put you in touch with up to three local gasfitters for quotes you can compare.

Get Free Quotes

At a Glance - Gas Heater Servicing in NSW (2027 Estimates)

Job 2027 Estimate (NSW) Main Price Factor Who Does the Work
Gas heater service, per appliance $100-$200 Heater type and access to the unit Licensed gasfitter
Gasfitter call-out, business hours $100-$180 Travel distance and booking time Licensed gasfitter
Flexible gas hose replacement $80-$200 per hose Hose length and fitting type Licensed gasfitter
Isolation valve replacement $200-$500 Valve position and pipe access Licensed gasfitter
Gas leak detection $150-$400 Size of the gas installation Licensed gasfitter
Accessible fitting or joint repair $200-$600 Number of joints and parts Licensed gasfitter
Gas bayonet installation $250-$500 Distance from the existing gas line Licensed gasfitter
Flued gas space heater installation $600-$1,800 Flue route and wall construction Licensed gasfitter
Emergency or after-hours gas call-out $150-$400+ Time of day and urgency Licensed gasfitter
Carbon monoxide alarm, product only $30-$80 Alarm model and power source Homeowner or installer

Cost Depth: What Moves a Heater Service Price

Servicing a single wall furnace or room heater in an open living area sits near the low end of the range. Ducted units in tight roof spaces, gas log fires with fans and heaters with worn hoses or valves add time and parts to the visit.

Booking two gas appliances on one visit means you pay one call-out fee, the charge for attending, and our 2027 estimate for a gasfitter in business hours is $100 to $180. Parts the gasfitter supplies may carry a margin of 10% to 30% over trade price.

All gasfitting work in NSW needs a licensed gasfitter, whatever the cost. Prices are 2027 estimates and exclude heater-specific parts, new gas lines and flue work unless shown.

What a Gas Heater Service Covers in NSW Homes

Gas heater servicing is a planned visit from a licensed gasfitter to clean, test and check a heater that is already installed. The work applies to wall furnaces, flued room heaters, portable convectors, gas log fires and ducted systems that warm several rooms through vents. On each visit, the gasfitter confirms that the heater burns its gas cleanly and that exhaust gases leave the home the way the maker intended. If the gasfitter finds a fault, the visit can turn into a repair, a part replacement or advice to stop using the heater. Booking before you first light the heater for the year leaves time to fix any fault without a rush.

We list heater servicing next to hot water, drains and taps in our NSW plumbing services section. Installing a new heater is a different job, because it involves new pipework, a flue and a fresh gas connection. New heaters, bayonets (the wall or floor sockets for portable heaters) and gas points are priced through our gas appliance installation guide. Servicing assumes the heater already has a working gas supply and, where needed, a flue in place.

Before booking, note the brand and model from the data plate, the small label on the heater body or behind a front panel. Check whether the heater runs on natural gas from a meter or on liquefied petroleum gas (LPG) from cylinders, because the paperwork differs between the two. Take a photo of the flue, the pipe or wall vent that carries exhaust outside, if the heater has one. Add the date of the last service if you still have the invoice. With these details, a gasfitter can bring suitable parts and give you a firmer price.

Carbon Monoxide and Other Risks From a Poorly Burning Heater

Burning gas produces heat, water vapour and exhaust gases, and a heater that burns poorly can release carbon monoxide. NSW Health warns that it is hard to know when carbon monoxide is present, because you cannot see or smell it. The carbon monoxide fact sheet from NSW Health says breathing small amounts can cause headaches, nausea, vomiting and weakness. Larger amounts can cause dizziness, fainting, loss of consciousness, long-term brain injury and death. The gas can become trapped inside a home when doors and windows are closed, such as when a room is shut up to keep heat in.

Unflued heaters add a second concern, because they release their exhaust straight into the room. Among the pollutants in that exhaust, NSW Health lists nitrogen dioxide (NO2), and high levels can irritate the airways and cause shortness of breath. People with asthma and other breathing conditions are particularly sensitive to nitrogen dioxide, according to the same health advice. Children exposed over a long period may suffer more cold symptoms or asthma attacks.

A service cannot make an unsuitable heater safe, but the gasfitter can find faults that develop over time. Dust, insects and debris can collect around burners and flues while a heater sits unused through the warmer months. Worn seals, damaged hoses and blocked vents can change how the heater burns or how its exhaust escapes. NSW Fair Trading recommends that gas appliances be serviced by a licensed gasfitter in line with the maker's specifications. Regular visits also build a record of the heater's condition, which helps when deciding whether further repairs make sense.

Service Intervals Set by NSW Agencies and Heater Makers

NSW Health advises having a registered gas fitter check a gas heater at least every two years. NSW Fair Trading gives matching advice in a news item on prohibited heaters, saying heaters should be serviced by a licensed gas fitter every two years. Rinnai, which makes Energysaver flued heaters and Avenger portable convectors, recommends a service at least every two years in its heater warranty terms. Regency, which makes gas fireplaces, inbuilt heaters that sit inside an existing fireplace and freestanding heaters, recommends an annual service for its gas fires. Where a maker sets a shorter interval than two years, follow the maker's instructions for that model.

Gas water heaters have their own advice from the NSW Government, which recommends a yearly service by a licensed gasfitter. Booking the heater and the water heater together saves a second call-out fee, the charge for attending the property, which our 2027 estimate puts at $100 to $180 for a gasfitter in business hours. If water is pooling near the water heater or the meter keeps turning with every tap shut, arrange water leak detection as a separate job. A gas cooktop that will not light can be checked while the gasfitter is on site, and our oven and cooktop repairs listings cover that work.

Heaters lit every evening through winter collect more dust and wear than ones used a few times a year. Rinnai's warranty terms exclude faults caused by improper maintenance or a failure to maintain the appliance. Read the warranty booklet for your model before the first service falls due. Keep each service invoice with the heater's manual, so you can see when the next visit is needed. Setting a phone reminder for the same month each year or second year helps avoid a missed service.

Flued, Unflued and Ducted Heaters and What Each Needs

A flued heater sends its exhaust outside through a pipe or a vent in the wall, called the flue. Unflued heaters have no flue, so their exhaust stays in the room and depends on room ventilation to clear. Ducted gas heaters sit outside, in the roof space or under the floor, and blow warmed air through ducts to vents in each room. Gas log fires burn gas over ceramic logs or pebbles inside a firebox that connects to a flue or chimney.

Heater Type Where the Exhaust Goes Service Focus Who Services It
Flued wall furnace or room heater Outside through a flue pipe or wall vent Burner, flue path, seals and controls Licensed gasfitter
Unflued fixed or portable heater Into the room Burner, hose, bayonet and room vents Licensed gasfitter
Ducted gas heater Outside through the unit flue Burner, heat exchanger, fan and controls Licensed gasfitter
Gas log fire or gas fireplace Up a flue or chimney liner Pilot, burner, fan and flue Licensed gasfitter
Outdoor gas heater Open air Burner, hose and regulator Licensed gasfitter for fixed connections

What the gasfitter checks first, and how long the visit runs, depends on the type of heater. On a flued heater, the path for exhaust gases matters as much as the burner itself. Ducted units rely on a heat exchanger, a sealed metal chamber that warms passing air without letting combustion gases mix with it. Photos of the heater and any vent on the outside wall help the gasfitter plan the visit when you are unsure which type you own. Exhaust gases from any heater must reach open air, so blocked or damaged flues need repair before the heater runs again.

NSW Health Advice on Unflued Gas Heaters

NSW Health says never to use an unflued gas heater overnight in the room where you sleep. Households should also check that the heated room has air vents and that nothing blocks them, according to NSW Health. Furniture, curtains or stored boxes in front of a vent cut the fresh air the room receives. For people who prefer gas heating, NSW Health recommends buying a flued heater. Before using any gas heater indoors, check that its instructions allow indoor use, as NSW Health advises.

The NSW Government warns against using any appliance made for outdoor use inside a house or an enclosed area. That warning applies to patio heaters and portable outdoor units carried indoors on a cold night. LPG gas cabinet heaters, which hold a gas cylinder directly behind the heating surface, have been banned in Australia since the 1980s. The NSW Government says these heaters are still sold illegally online, in stores and at market stalls.

Servicing an unflued heater involves checking the burner, the gas connection and the room around it. The gasfitter can say whether the room's vents suit the heater, based on the maker's instructions and the installation standards they work to. If you plan to replace an unflued heater, the service visit is a good time to discuss a flued model or another kind of heating. Fitting a flued heater means a new flue and possibly new pipework, which is installation work priced separately. Flued gas space heater installation is estimated at $600 to $1,800 across NSW for 2027.

New gas lines to a heater sometimes need a trench across the yard, which means locating other buried services first. Before any digging starts, the gasfitter will want to know where the sewer pipe runs. If the digging uncovers cracked clay sewer pipes, fixing them is a separate drainage job that drainers quote for on our sewer line repairs page. Ask for any trenching, pipe locating or drainage repairs to be listed apart from the heater price.

Checks a Gasfitter Makes During a Heater Service

The exact checklist depends on the heater and its maker's instructions. Regency's care advice covers cleaning the burner, the control compartment and the fan, and checking that the flame burns steadily without lifting. Regency also advises having the venting, meaning the flue that takes exhaust outside, checked for corrosion, condensation, blockages and poor joints. A pilot is the small flame that lights the main burner, so mention a pilot that keeps going out when you book. Ask for each check to be listed on the invoice, so you keep a record of the work done.

Landlords have four checks to make on gas heaters under NSW Government guidance, and they suit any household. Bathroom and kitchen heaters should have unobstructed ventilation, and heater flue pipes should be free of restrictions and holes. There should be no soot deposits from the heater and no discolouration on or around the heater and flue. During a service, the gasfitter looks for the same signs, along with the condition of hoses, fittings and controls. If any of these signs appear between services, book a visit before using the heater again.

Flued heaters need the flue checked as well as the burner, because the flue is the only route for exhaust gases to leave the home. Under the Gas and Electricity (Consumer Safety) Act 2017, installing, altering, extending, removing or repairing a flue counts as gasfitting work. A cracked, rusted or disconnected flue pipe found during a service therefore needs a licensed gasfitter to fix it. Ask the gasfitter how they will confirm that exhaust gases leave through the flue rather than spilling back into the room.

Standards Australia publishes Australian Standard AS 4575:2019, Gas appliances: Servicing of Type A appliances. Type A appliances are mass-produced natural gas or LPG appliances made for homes and light commercial premises, such as household space heaters. The Australian Government's business licence listing describes the standard as setting the essential requirements for servicing, repair, testing and conversion from one gas type to another. You do not need to buy the standard yourself, but a gasfitter can tell you which checks they follow. When you book, it is fair to ask whether the gasfitter works to that standard on your heater. Having those checks listed on the invoice gives you a record to compare at the next service.

Servicing Ducted Gas Heating Systems

Braemar makes ducted gas heating and gas wall furnaces, and Brivis makes ducted gas heaters for homes. Bonaire also makes ducted gas heating and says on its website that service intervals depend on the specific product. Check the manual for your model, because a ducted unit may follow different servicing steps from a room heater. The heater unit may sit outside, in the roof space or under the floor, so tell the gasfitter where it is when you book. Units in tight roof spaces take longer to reach, which can add labour time to the visit.

Ducted systems also have ducts, a fan and a return air grille, the large vent that draws room air back to the heater. Damaged or disconnected ducts lose warm air into the roof space, and a gasfitter may point them out during the service. Duct repairs are not gasfitting work, so a heating and cooling technician may be needed for them. Where the ducted system also cools the home, the cooling side is maintained through air conditioning servicing as a separate booking.

We have not found a separate figure for a ducted gas heater service in Quote Yard NSW price data. Ask for a fixed price for a ducted service before booking, because roof access and system size change the time needed. If the gasfitter charges by the hour, our 2027 estimate for gasfitter labour is $90 to $180 per hour in business hours. Check that the price includes cleaning the burner and fan, testing the controls and checking the flue.

Gas Log Fires and Gas Fireplaces

Gas log fires and gas fireplaces combine a burner, a flue and in some models a fan, inside a firebox set into a wall or chimney. Real Flame designs and makes gas fireplaces in Melbourne, including high-efficiency, decorative and outdoor gas fires. Jetmaster makes enclosed gas fireplaces such as the freestanding I25-X, and Escea makes its DS Series of indoor gas fireplaces. Coonara's range includes in-built and freestanding gas heaters alongside its wood heaters. Regency recommends maintenance by a licensed gas service provider and suggests booking it through a certified Regency dealer.

Gas fires built into old brick chimneys rely on that chimney or a liner, a metal pipe fitted inside the chimney, to carry exhaust gases up and out. Nests, fallen mortar or other debris inside the chimney can block the exhaust path. Chimneys left unused for years may need a separate chimney cleaning visit before the gas fire is serviced. After any cleaning, the ceramic logs or pebbles should go back only in the layout the maker's manual shows.

Portable Heaters, Outdoor Heaters and LPG Cylinders

Portable gas heaters plug into a bayonet, a wall or floor socket with a valve that lets you connect and disconnect the heater's hose. Rinnai makes portable gas convector heaters, including the Enduro, Dynamo and Avenger models. The hose and bayonet fitting wear each time the heater is moved, so the gasfitter checks both for damage and leaks. Replacing a flexible gas hose is estimated at $80 to $200 per hose for 2027. If a bayonet needs replacing or adding, gas bayonet installation is estimated at $250 to $500.

Gasfitters service outdoor gas heaters much like indoor ones, but pay extra attention to the hose, regulator and burner after months outdoors. Heatstrip makes a portable LPG radiant heater and a wall-mounted natural gas heater for outdoor areas. A regulator is the device on an LPG cylinder that lowers the gas pressure to suit the appliance. Fixed outdoor heaters connected to the home's gas line are serviced the same way as indoor heaters. Follow the maker's storage instructions for portable outdoor heaters and their cylinders between uses. For a new fixed outdoor heater or gas point, compare installers on our outdoor heating and gas heater installation page.

LP gas cylinders must be transported upright, the NSW Government says. Refillable cylinders can only be reused if they carry a current, legible test mark from a certified test station that is no more than 10 or 15 years old, as the NSW Government sets out. Check the date stamped on your cylinder before the gasfitter arrives, and mention it if the date is close. Your gasfitter can tell you whether the cylinder, regulator and hose are fit to stay in service. Never bring an outdoor heater into a closed garage or room, even for a short time.

Signs a Heater Needs Checking Before Its Next Service

Some signs mean a heater should be switched off and checked, even when a service is not yet due. Soot on or above the heater, and discolouration on the wall around the heater or flue, both appear on the NSW Government checklist for rental heaters. Any smell of gas near the heater, its hose or its fittings means you should stop and follow the gas leak steps below. Headaches, nausea, vomiting or weakness in people near a running heater match the early symptoms NSW Health lists for carbon monoxide. Pilot lights that keep going out, and heaters that will not stay lit, also need a gasfitter.

Damaged hoses, a loose bayonet connection or a scorched panel need attention before the heater is used again. Keep the heater off until the gasfitter has checked it, and do not open the casing or adjust the gas controls yourself. The Gas and Electricity (Consumer Safety) Act 2017 counts repairing a gas installation as gasfitting work, along with connecting or disconnecting an appliance anywhere other than a bayonet socket. That makes such repairs licensed work, however small they seem.

Carbon Monoxide Alarms and Where NSW Health Says to Fit Them

For homes with gas heaters, NSW Health suggests thinking about a carbon monoxide alarm, which warns you if levels begin to rise. Smoke alarms and carbon monoxide alarms are different devices, as NSW Health points out. Choose an alarm that states it meets the American standard UL2034 or the European standard EN50291, as NSW Health recommends. Place alarms near all bedrooms and in rooms with gas heaters. Quell, a home safety brand, sells carbon monoxide alarms in Australia.

Alarm Question NSW Health Advice or Estimate Why It Matters
Which standard to look for UL2034 (USA) or EN50291 (Europe) Shows the alarm was tested to a recognised standard
Where to place alarms Near all bedrooms and in rooms with gas heaters Gives warning where people sleep and where gas burns
Smoke alarm or CO alarm A carbon monoxide alarm is a different device A smoke alarm is not a substitute
Product price $30-$80 (2027 estimate) Fitting costs extra if an installer is used

Alarms give warning between services, but they do not replace a service. Follow the alarm maker's instructions for testing it and for replacing it at the end of its life. Smoke alarms are a separate device with their own rules, and electricians fit hardwired units under our smoke alarm installation listings. The 2027 estimate for a carbon monoxide alarm is $30 to $80 for the product, before any fitting. Mount each alarm in the position its maker's instructions show. Battery-powered alarms can be fitted by a homeowner, while hardwired alarms need a licensed electrician.

If Someone Feels Unwell Near a Gas Heater

If someone is dizzy, fainting or has lost consciousness, NSW Health says it is an emergency and you should call Triple Zero (000). For milder symptoms, NSW Health advises getting everyone out of the house into fresh air. The Poisons Information Centre gives advice at any time on 13 11 26. If you need an interpreter, call the Translating and Interpreting Service (TIS) on 131 450 and ask for the Poisons Information Centre. Switch the heater off on your way out only if you can do so quickly and safely.

NSW Health lists babies, pregnant women, elderly people and people with some long-term illnesses, such as heart problems, as likely to become sicker. Households with these residents have extra reason to keep heaters serviced and alarms fitted. After any suspected carbon monoxide incident, leave the heater off until a licensed gasfitter has inspected it. Serious gas accidents can be reported to NSW Fair Trading on 13 32 20, according to the NSW Government gas safety page. Keep the Poisons Information Centre number somewhere easy to find near the phone. When you book the inspection, tell the gasfitter about the incident so they know to check whether exhaust gases are escaping into the room.

If You Smell Gas Near a Heater

The NSW Government says to treat any gas leak as a potentially lethal risk. Leave the building immediately, call 000 and ask for Fire and Rescue NSW. If it is safe to do so, turn off the gas at the meter or cylinder and turn off all appliances and pilot lights. Open doors and windows only if it is safe, and put out any naked flames and cigarettes. Never use a lighter or match to look for a leak. Once everyone is safe, contact your gas supplier, whose phone number is on your gas bill, and a licensed gasfitter.

Leaks at a heater hose, bayonet or fitting are repair work, not a routine service item. Gas leak detection is estimated at $150 to $400 for 2027, and an accessible fitting or joint repair at $200 to $600. For leaks in pipes inside walls or under floors, licensed gasfitters can quote through our gas leak repairs service. Outside business hours, you can find help in our emergency plumber listings, with an emergency gas call-out estimated at $150 to $400 or more.

Only a Licensed Gasfitter Can Service a Gas Heater

In NSW, any gasfitting work needs a licence, whatever the job costs, and Building Commission NSW regulates these licences. Always have a licensed gasfitter install, repair and service gas appliances, as the NSW Government advises. You can check a gasfitter's licence online through the NSW Government licence check or by calling 13 27 00. The check shows the licence number, the categories of work it covers, its expiry date and any conditions. Look for gasfitting in the listed categories, since plumbing, draining and gasfitting are separate types of licensed work.

Where a heater's maker lists approved service agents, the NSW Government's rental guidance suggests using one. If the maker lists none, NSW Fair Trading recommends a licensed gasfitter. Rinnai's warranty terms state that service and repair must be done by persons authorised under local regulations. When you book, give the gasfitter the brand and model so they can confirm they work on it. For prices on wider gasfitting work, from new gas points to pressure tests, see our gas fitting guide.

If your gasfitter also holds a plumbing licence, other small jobs can be booked for the same visit. Worn laundry taps and old kitchen mixers can be replaced under our tap and mixer installation service. Weak flow from the hot water taps may come from the supply side, which a plumber assesses under low water pressure repairs. Combining jobs avoids a second call-out fee, estimated for 2027 at $80 to $150 for a plumber in business hours. Confirm the hourly rate for any extra work before the gasfitter starts.

Certificates, Defect Notices and BCNSW eCert

After any work involving gas, the licensed gasfitter must give you a certificate, according to the NSW Government. For a home on the gas network this is a Certificate of Compliance, and for bottled LPG it is a certificate of inspection. The certificate must include the gasfitter's name and licence number. These certificates confirm that a licensed gasfitter completed the work, and the same page says they protect you against faulty work. Since 1 March 2026, gasfitters must use BCNSW eCert, the online system run by Building Commission NSW, to submit these certificates for all gasfitting work. For network gas, the gasfitter must test the installation for defects and submit the certificate within five business days of finishing.

The NSW Government pages we checked do not say whether a routine service with no repair counts as gasfitting work. Replacing a hose, a valve or a faulty part is repair work, and repairing a gas installation falls within the legal definition of gasfitting work. Find out from the gasfitter whether your visit will produce a certificate, and keep any copy with the heater's manual. A Certificate of Compliance must also state whether the installation is in safe working order. Keeping the certificate also helps if you later sell the home or lease it to tenants.

For LPG installations, a gasfitter who finds an apparently defective appliance must attach a defect notice to it. The notice must show the word DEFECT in capital letters at least 20 millimetres high. If the defect cannot be isolated from the rest of the installation, the gasfitter must remove its compliance plate, the plate that marks the installation as compliant. The certificate of inspection must also state the work needed to fix the defect. Leave any appliance carrying a defect notice switched off until a licensed gasfitter has repaired it.

Paperwork to Keep After a Heater Visit

Keep the invoice listing each check, plus any Certificate of Compliance or certificate of inspection issued after repairs. Both should show the gasfitter's name and licence number.

Store them with the heater manual and warranty card. They help with warranty claims, rental records and the next gasfitter's visit.

Since 1 March 2026, gasfitters submit certificates through BCNSW eCert. All prices shown on this page are 2027 estimates.

Faults, Replacement Parts and Recall Checks

Each service can end with the heater cleaned and working, with a part replaced, or with advice to stop using it. Parts that may need replacing include hoses, isolation valves and fittings, and each is priced on top of the service. An isolation valve is the tap on the gas line that shuts off gas to a single appliance. Replacing one is estimated at $200 to $500 for 2027, and a flexible hose at $80 to $200. Get a written price for any part before the gasfitter fits it, unless the fault is an immediate danger.

Heater-specific parts such as thermocouples, igniters and fan motors vary by model, and we have no price band for them. A thermocouple is a small sensor that shuts off the gas if the pilot flame goes out. Where the maker no longer supplies a part, the gasfitter may advise replacing the heater. Before approving a costly repair on an old heater, compare it with the price of a new flued heater or another heating type.

Check whether your heater has been recalled before the service, using the recall search on the Product Safety Australia website. For current gas appliance recalls, the NSW Government directs consumers to that site. Gas appliances in NSW must be marked with an Australian recognised certification label, and overseas approvals are not recognised. If your heater has no certification label, tell the gasfitter, because the NSW Government warns that unlabelled appliances might be unsafe. Report unsafe gas products to NSW Fair Trading on 13 32 20 or through Product Safety Australia.

Repairing or Replacing an Old Gas Heater

Some households decide after a service to replace an old gas heater with an electric option. Daikin makes reverse cycle split systems such as the Alira X, which heat and cool a room. Dimplex makes column heaters, convector heaters and electric fires for rooms without a split system. Split system installers are listed on our reverse cycle air conditioning page. Disconnecting a fixed heater from the gas installation is gasfitting work, so a licensed gasfitter needs to remove it and make the gas line safe.

Staying with gas means choosing between repairing the current heater and fitting a new flued model. Repairing keeps the existing gas point and flue, while a new heater may need a new flue route and wall penetration. Flued heater installation is estimated at $600 to $1,800 for 2027, before the price of the heater. Request both options in writing during the service visit, so you can compare them at home. Room-sealed heaters take the air they burn from outside and send exhaust outside, which keeps combustion gases out of the living space. Running costs and energy ratings belong in the comparison too, alongside the installation price.

Landlord, Tenant and Strata Duties for Gas Heaters

NSW landlords are responsible for repairing and maintaining gas appliances such as heaters, stoves and ovens within the property boundary. Landlord checks listed by the NSW Government include unobstructed ventilation for bathroom and kitchen heaters and flue pipes free of restrictions and holes. Tenants should make sure gas appliances are regularly serviced and should follow the maker's instructions. Where the maker has no approved service agent, NSW Fair Trading recommends engaging a licensed gasfitter. For questions about tenancy duties, NSW Fair Trading takes residential tenancy enquiries on 13 32 20.

Under NSW rental rules, a gas leak and a failure or breakdown of the gas supply are both urgent repairs. Heater breakdowns appear on the same NSW list of urgent repairs. Tenants who cannot reach the landlord or agent can arrange the urgent repair and be reimbursed up to $1,000. The landlord may not have to pay if the repair was not done by a licensed tradesperson.

Property managers looking after several homes can group heater services into one booking period. Other routine work between tenancies can be arranged through our rental property maintenance service. Keep each invoice or certificate on file, so you can show when every heater was last checked. Tenants who notice soot, discolouration or a gas smell should report it to the agent in writing straight away. In strata buildings, gas pipes in common areas may belong to the owners corporation, the body that manages common property, and strata plumbers can help with shared pipework.

Homes on Bottled LPG Away From the Gas Network

Homes away from the gas network use LPG from cylinders or a bulk tank, delivered by a gas supplier. After gasfitting work on an installation not connected to a network, the gasfitter must inspect all connected gas containers, regulators and appliances. They must also test the whole installation for defects, attach a compliance plate and give the owner a certificate of inspection. The gasfitter must keep a copy of that certificate for five years. Contact the supplier named on your cylinders about exchanges and deliveries.

Some regional homes rely on bottled LPG for heating and an on-site septic system for wastewater, and both need regular maintenance visits. Septic pump-outs and inspections are covered on our septic tank services page. Regional gasfitters may travel a long way, so group the heater service with hot water or cooktop checks on the same trip. Confirm before booking whether travel time is charged on top of the service price. LPG water heaters can be checked on the same visit, and the NSW Government recommends a yearly service for gas water heaters. Keep your gas supplier's phone number from your bill somewhere easy to find.

What a Heater Service Costs in 2027 (Estimates)

Item 2027 Estimate (NSW) Notes
Gas heater service, per appliance $100-$200 Cleaning and testing one appliance
Gasfitter call-out, business hours $100-$180 May be added to hourly labour
Gasfitter labour, business hours $90-$180 per hour Used when there is no fixed price
Flexible gas hose replacement $80-$200 per hose Portable and outdoor heaters
Isolation valve replacement $200-$500 Shuts off gas to one appliance
Gas leak detection $150-$400 Before repairs are quoted
Accessible fitting or joint repair $200-$600 Exposed pipework only
Emergency or after-hours gas call-out $150-$400+ Before any repair work
Carbon monoxide alarm, product only $30-$80 Fitting extra
Flued gas space heater installation $600-$1,800 Heater price extra

These figures are 2027 estimates for NSW, drawn from Quote Yard plumbing and gas fitting price data. The service price covers the gasfitter's time to clean and test one appliance, and parts are extra. Some gasfitters charge a call-out fee plus hourly labour, while others quote a fixed price per heater. Fixed prices are easier to compare, so request one when you book. Rates for wider gasfitting work, including new gas points, are compared in our gas plumber cost guide.

After-hours plumbing rates are estimated at 50% to 100% above standard rates. Planned services rarely need an after-hours slot, so choose a weekday booking where you can. Plumbers may add a margin of 10% to 30% over trade price on parts they supply. For labour rates across the state, see our plumber pricing guide.

Getting Ready for the Service Visit

Clear the area around the heater and any outdoor unit, so the gasfitter can reach the controls, flue and gas connection. An adult needs to be home, since the gasfitter will run the heater and may need access to the gas meter or cylinders. Switch off a heater that has been running well before the visit, so it can cool. Have the manual, the last invoice and any warranty card ready to hand over. Unlock any side gate or meter box the gasfitter may need to reach. Move cars or stored items that block access to an outdoor ducted unit or the flue outlet on the outside wall.

Tell the gasfitter about any smells, noises or pilot problems you noticed when the heater was last used. Keep pets and children away from the work area while panels are off and gas is being tested. If you use a portable heater in several rooms, show the gasfitter each bayonet point so they can check them all. Ask the gasfitter to run the heater for a few minutes with you present at the end of the visit. That way you can see how it lights and confirm it is working before the gasfitter leaves.

Gasfitters Around Greater Sydney and the Regions

Licensed gasfitters service heaters across Greater Sydney, the Hunter, the Illawarra, the Central Coast and regional NSW. In Sydney, you can compare local plumbers and gasfitters on our Sydney plumbers page. For Newcastle and the Hunter, local trades are listed under our Newcastle and Hunter plumbers page. Further from the gas network, check that the gasfitter works on LPG systems and holds the gasfitting licence category. Travel time can form part of the price outside the larger centres, so confirm whether it is included.

What to Look Out For in Gas Heater Servicing Quotes

Look for a licence number on the quote and check it against the NSW Government licence register before the visit. Clear quotes name the heater, list the checks included and say whether parts are extra. Be wary of a price that bundles a service with an expensive part replacement before anyone has inspected the heater. Any gasfitter who refuses to provide a certificate after repair work is not meeting NSW rules. Pressure to replace a working heater on the spot, with no written reason, is another warning sign. Check that the name on the quote matches the name shown on the licence record.

Proper servicing involves running the heater and checking how it burns, not only a visual look. Be cautious about quotes for a flued heater that leave out the flue, because the exhaust path is central to heater safety. Watch for gas work offered by someone without a gasfitting licence category. Unlicensed repairs can also cost tenants their reimbursement, since a landlord may not have to reimburse urgent work that a licensed tradesperson did not carry out. If a quote skips these points, ask follow-up questions before you accept it.

Weighing Up Quotes From Different Gasfitters

Get quotes from at least two licensed gasfitters, giving each the same heater details and photos. Each price may be per heater, per visit or per hour, so check which applies and whether a call-out fee is added. Compare the checks each gasfitter lists, such as burner cleaning, flame checks, flue checks and leak testing. Parts pricing matters too, so confirm whether you will approve each part before it is fitted. Pick the quote that is clearest about scope, not only the one with the lowest figure.

Under the Australian Consumer Law, services must be provided with due care and skill, according to the Australian Competition and Consumer Commission (ACCC). Parts supplied must be of acceptable quality and fit for their purpose. If a repaired heater fails soon after the visit, contact the gasfitter first and keep the invoice as evidence. Photos of the heater before and after the work help if questions come up later. These consumer guarantees apply alongside any warranty the gasfitter or heater maker offers.

Dripping shower mixers and running cisterns can be fixed on the same trip if the gasfitter also does plumbing repairs. Those jobs are priced under bathroom and kitchen fixture repairs, so mention them when you request quotes. Listing every job in one request lets each gasfitter quote the whole visit. Comparing whole-visit prices is fairer than comparing a heater service on its own, because the call-out fee is shared. Confirm that the same person holds both a plumbing and a gasfitting licence before you group the jobs. Any job outside their licence categories will need a second tradesperson.

Looking After a Gas Heater Between Services

Keep the area around the heater clear of curtains, furniture, clothes and anything else that can burn. Dust the outside of the heater only when it is switched off and cool, following the maker's cleaning instructions. Room vents and any outdoor flue terminal should stay clear of plants, stored items and debris. Turn the heater off when you leave home and supervise children around heaters, as NSW Health advises. If anything changes in how the heater looks, sounds or smells, switch it off and book a gasfitter.

Sealing every gap in a room can reduce the fresh air an unflued heater depends on. Before draught-proofing a room with an unflued heater, talk to a gasfitter about whether the room will still have enough ventilation. Door and window sealing can then be booked through our draught-proofing and sealing service. Bathroom exhaust fans and kitchen rangehoods can pull air through a room, so tell the gasfitter where they are in relation to the heater.

Gas Heater Servicing Across New South Wales

Licensed gasfitters service gas heaters in Sydney, Newcastle and the Hunter, the Central Coast, Wollongong and the Illawarra, the Blue Mountains, the Southern Highlands and regional NSW. Post your job with the heater type, brand and gas supply, and compare quotes from gasfitters who work in your area.

▶ Sydney Inner City 18 areas
Sydney CBD Surry Hills Darlinghurst Potts Point Paddington Redfern Newtown Glebe Balmain Pyrmont Ultimo Chippendale Alexandria Waterloo Zetland Erskineville Rozelle Leichhardt
▶ Greater Sydney 25 areas

Western Sydney

Parramatta Penrith Blacktown Mount Druitt Seven Hills Wetherill Park Auburn Fairfield Cabramatta St Marys

South Western Sydney

Liverpool Campbelltown Bankstown Revesby

Northern Sydney

Hornsby Chatswood Epping Macquarie Park Eastwood

The Hills District

Castle Hill Baulkham Hills

Inner West

Ryde Strathfield Burwood

St George

Hurstville Kogarah
▶ Sydney Coastal 23 areas

Northern Beaches

Manly Dee Why Curl Curl Freshwater Brookvale Collaroy Narrabeen Mona Vale Newport Avalon Palm Beach

Eastern Suburbs

Bondi Tamarama Bronte Coogee Maroubra Randwick

Harbour Suburbs

Double Bay Rose Bay Watsons Bay

Sutherland Shire

Cronulla Miranda Sutherland
▶ Hunter & Central Coast 19 areas

Central Coast

Gosford Terrigal Wyong The Entrance Tuggerah Erina Woy Woy

Hunter Valley

Newcastle Maitland Lake Macquarie Charlestown Belmont Raymond Terrace Cessnock Singleton Muswellbrook

Port Stephens

Nelson Bay Salamander Bay Shoal Bay
▶ Illawarra & South Coast 18 areas

Illawarra

Wollongong Shellharbour Kiama Dapto Corrimal Thirroul Gerringong

Shoalhaven

Nowra Berry Ulladulla Huskisson Vincentia

Sapphire Coast

Batemans Bay Moruya Narooma Bega Merimbula Eden
▶ North Coast 19 areas

Mid North Coast

Port Macquarie Forster Taree Kempsey Laurieton

Coffs Coast

Coffs Harbour Bellingen Sawtell Grafton Yamba

Northern Rivers

Byron Bay Tweed Heads Ballina Lismore Bangalow Lennox Head Brunswick Heads Mullumbimby
▶ Blue Mountains & Highlands 17 areas

Blue Mountains

Katoomba Leura Wentworth Falls Blackheath Springwood Hazelbrook Glenbrook Faulconbridge Lawson Blaxland Lithgow

Southern Highlands

Bowral Moss Vale Mittagong Bundanoon Robertson Berrima
▶ Regional NSW 21 areas

Central West

Orange Bathurst Dubbo Mudgee Parkes Forbes Cowra Young

Riverina

Wagga Wagga Albury Griffith Leeton Goulburn Queanbeyan

New England

Tamworth Armidale Inverell Moree Narrabri

Far West

Broken Hill Cobar

Gas Heater Servicing FAQs

Is a service every two years enough for my gas heater?
Two years is the longest gap NSW Health advises, since it recommends a registered gas fitter check a gas heater at least every two years. Some makers set a shorter interval, and Regency recommends an annual service for its gas fires. Rinnai recommends a service at least every two years for its heaters. Follow whichever interval your heater's manual gives if it is shorter than two years. Book sooner if you notice soot, discolouration, a gas smell or pilot problems.
Can a plumber without a gas licence service my heater?
No, servicing and repairing gas appliances is work for a licensed gasfitter in NSW. Plumbing, draining and gasfitting are separate types of licensed work. Check the gasfitter's licence online or by calling Building Commission NSW on 13 27 00. Look for gasfitting among the categories listed on the licence.
What happens if the service finds my heater is unsafe?
The gasfitter will explain the fault and may advise you to stop using the heater until it is repaired. On an LPG installation, a gasfitter who finds an apparently defective appliance must attach a defect notice to it. The certificate of inspection must then state the work needed to fix the defect. Leave the heater off until a licensed gasfitter has repaired it. Ask for a written price for the repair and for a replacement heater, so you can compare them.
Which carbon monoxide alarm does NSW Health suggest?
Look for an alarm labelled as meeting the American standard UL2034 or the European standard EN50291, as NSW Health suggests. Place alarms near all bedrooms and in rooms with gas heaters. A carbon monoxide alarm is a different device from a smoke alarm. The product is estimated at $30 to $80 for 2027, before any fitting. Test and replace the alarm as its maker's instructions direct.
Can I use an unflued gas heater in a bedroom at night?
NSW Health says never to use an unflued gas heater overnight in the room where you sleep. Unflued heaters release carbon monoxide and nitrogen dioxide directly into the room. Check that the room has air vents and that they are not blocked, as NSW Health also advises. For gas heating, NSW Health recommends buying a flued heater.
Who arranges heater servicing in a NSW rental home?
Landlords are responsible for repairing and maintaining gas appliances such as heaters within the property boundary. Tenants should also make sure gas appliances are regularly serviced and follow the maker's instructions, according to the NSW Government. Heater breakdowns and gas leaks are both listed as urgent repairs. When the landlord cannot be reached, tenants can arrange urgent repairs and be reimbursed up to $1,000. The repair should be done by a licensed tradesperson, or the landlord may not have to pay.
Will I receive a certificate after a heater service?
After any work involving gas, the NSW Government says the gasfitter must give you a certificate. Network gas homes receive a Certificate of Compliance, and LPG homes receive a certificate of inspection. Repairs such as a new hose or valve fall within the legal meaning of gasfitting work. The NSW Government pages we checked do not say whether a service with no repair needs a certificate. Ask the gasfitter before the visit and keep any certificate with the heater manual.
What should I have ready before the gasfitter arrives?
Have the heater's brand and model, the manual and the last service invoice ready. Clear access to the heater, its gas connection and any outdoor flue or ducted unit. Switch the heater off early so it has time to cool. Note any smells, noises or pilot problems you noticed when it was last used. Make sure an adult is home who can let the gasfitter reach the gas meter or cylinders.
Is it safe to bring an outdoor gas heater inside on a cold night?
No, the NSW Government warns against using any appliance made for outdoor use inside a house or enclosed area. Outdoor heaters are designed for open air, where exhaust gases can disperse. Using one in a closed room or garage risks a build-up of carbon monoxide. LPG cabinet heaters, which hold the cylinder behind the heating surface, have been banned in Australia since the 1980s.
How much does a gas heater service cost in NSW?
Our 2027 estimate for servicing a gas appliance is $100 to $200 per appliance across NSW. Business-hours call-outs for a gasfitter are estimated at $100 to $180, and labour at $90 to $180 per hour. Replacement hoses, valves and heater parts are charged on top of the service. Ducted units in tight roof spaces can take longer, so ask for a fixed price before booking.

Specialist Gas and Heating Services

For Trades & Contractors - NSW

Hold a NSW gasfitting licence and want more heater servicing work? See what homeowners are posting on the NSW job leads board, and browse plumber jobs in NSW and gas plumber jobs.

Need a Gas Heater Serviced in New South Wales?

Post your job and connect with licensed gasfitters across NSW for heater servicing, safety checks, hose and valve replacement and repairs.

Get Free Gasfitter Quotes

About This Guide

This page provides general guidance only and is not professional or medical advice. Prices are 2027 estimates for NSW and change with the heater, its condition and location. Gas safety, licensing and rental rules can change, so confirm current requirements with Building Commission NSW, NSW Fair Trading and your heater's maker before work starts.

Reviewed by The Quote Yard Editorial Team

Published 17 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All NSW tradies are required to hold appropriate licences. Verify at NSW Fair Trading.
Prices are 2027 estimates for New South Wales and exclude replacement parts, heater-specific repairs, new gas lines and flue work unless shown. Ducted systems and heaters in hard-to-reach roof spaces may cost more to service.
Need work done? Get free quotes. Post a Job – It's Free