Septic System Playing Up?
Tell us about your tank, treatment unit or drain problem, and we'll connect you with licensed plumbers and septic contractors near you.
Typical Costs (2027 Estimates)
These are 2027 estimates for NSW, and pump-out prices change with tank size, hose access and travel, while sewer connections and old tank decommissioning are quoted per job.
Septic Tank Services NSW - Get Local Quotes
Septic tank services in NSW keep on-site sewage systems working on properties with no sewer main, from rural acreage to bush blocks on the edge of regional towns. The work ranges from desludging a septic tank, which means pumping out the settled solids, and servicing an aerated wastewater treatment system (AWTS) to clearing the house drain. Under the Local Government Act 1993, your council approves the installation of a system and issues a separate approval to operate it. NSW Health accredits septic tanks and treatment units, and its certificates for aerated units set servicing at three-monthly intervals. Laying drains, fitting tanks and repairing pipework is plumbing and drainage work, so it needs a licensed plumber or drainer. Councils such as Shoalhaven City Council also inspect on-site systems every five years, or more frequently where a system is rated high risk. Knowing how your system works helps you spot a struggling tank early, look after the yard area that takes the treated wastewater and check a septic property before you buy. Installing a new system, moving to the sewer when a main arrives and septic faults in rented homes each follow their own steps below. Pump-out contractors and authorised service agents look after the tank itself, while licensed plumbers handle the drains. Prices are 2027 estimates for NSW, drawn from our plumbing price guides, covering pump-outs, AWTS servicing and drain work. Post your job on The Quote Yard to compare quotes from licensed local plumbers and septic contractors.
At a Glance - Septic and On-Site Sewage Jobs in NSW (2027 Estimates)
| Job | 2027 Estimate (NSW) | Main Price Factor | Who Does It | Record to Keep |
|---|---|---|---|---|
| Septic tank pump-out (desludge) | $380-$1,200 | Tank volume and hose access | Liquid waste contractor | Pump-out receipt |
| AWTS quarterly service visit | $150-$620 | Region, travel and parts | Agent authorised by the maker | Service report copy |
| Blocked drain clearing (house to tank) | $150-$600 | Blockage depth and access | Licensed plumber | Itemised invoice |
| High-pressure drain jetting | $250-$700 | Pipe length and blockage | Licensed plumber | Itemised invoice |
| Drain camera inspection | $250-$600 | Line length and report | Licensed plumber | Footage and findings |
| Locating and depth marking | $150-$400 | Buried lines and lids | Licensed plumber | Marked site plan |
| Drain section dug up and replaced | $1,500-$4,000 | Depth, length and ground | Licensed plumber or drainer | Certificate of Compliance |
| Complete system replacement | $12,000-$38,000 | Site, soil and treatment level | Licensed plumber or drainer | Council approval and certificate |
| Connecting the house to a new sewer | Quoted per job | Distance to the connection point | Licensed drainer | Certificate of Compliance |
| Emergency attendance | $180-$350 | Time of day and urgency | Licensed plumber | Itemised invoice |
Cost Depth: Why Septic Quotes Vary So Much
Septic pump-outs are estimated at $380 to $1,200 a load for 2027, and an AWTS service visit at $150 to $620. Tank volume, the distance from the truck to the lids and the conditions on your council approval all change the scope. Two quotes that name the same tank size are far easier to compare.
Plumbing work around a tank, such as call-outs and drain clearing, also has 2027 estimates. Business-hours call-out fees are estimated at $80 to $150 across NSW, and $60 to $120 in regional areas. Clearing a blocked drain is estimated at $150 to $600, and a standalone camera inspection of the line at $250 to $600.
Drain, tank and pipework repairs are plumbing and drainage work that needs a licence in NSW, whatever the price. Prices are 2027 estimates and exclude council fees, sewer connections and tank decommissioning.
Homes in NSW That Rely on a Septic System
Septic systems treat household wastewater on the property itself, because no sewer main runs past the block to carry it away. In NSW these systems serve rural acreage, farmhouses, holiday homes and some streets on the outskirts of regional towns. Councils call them on-site sewage management systems, and each council handles the approvals and inspections in its own area. In its area, Shoalhaven City Council names a septic tank with absorption trenches, an aerated system with irrigation and a pump-out system as the three most common types. Further north, the Central Coast Council list adds wet composting systems, fabric and sand filters, composting toilets and septic tanks with evapotranspiration beds.
Wastewater is the used water from toilets, showers, basins, the kitchen sink and the laundry. Effluent is the partly treated liquid that leaves a tank and flows on to a disposal area or a holding tank. Sludge is the heavy layer of solids that settles at the bottom of a septic tank, and scum is the lighter layer of fats floating on top. These terms appear on council forms, service reports and quotes, so knowing them makes each conversation with a contractor easier.
Several trades work on septic systems in NSW, and the right one depends on the job. Licensed plumbers and drainers install tanks, lay the drains from the house and repair broken pipework. Liquid waste contractors with vacuum tankers pump the sludge and scum out of the tank. Service agents authorised by the maker of an aerated unit carry out its quarterly service and send a report to council. The same licensed plumbers also handle taps, toilets and hot water, and you can compare them through our NSW plumbing services listings.
How a Septic Tank and Its Disposal Area Work Together
All the wastewater from the house enters the septic tank through the house drain. Inside the tank, solids sink to the bottom as sludge while fats and oils rise to the top as scum. Bacteria in the tank break down part of this material, and Shoalhaven City Council notes that the rest builds up until it is pumped out. The liquid between the two layers flows out as effluent to the land application area, which is the part of the yard set aside to receive it. With absorption trenches, the effluent soaks into the soil through shallow trenches laid along the yard. Evapotranspiration beds rely on plants and evaporation, as well as the soil, to take the liquid away.
Pump-out systems have no disposal area, so effluent collects in a holding tank or collection well until a tanker removes it. Collection wells appear on the NSW Health list of sewage management facilities it accredits. Because nothing leaves the property through the soil, the well fills at the rate the household uses water. Shoalhaven owners can ask for a change of pump-out frequency through an online form from Shoalhaven Water. Owners in other areas should check the pump-out arrangements with their own council before changing anything.
| System Type | Where the Effluent Goes | Routine Care | Main Contractor |
|---|---|---|---|
| Septic tank with absorption trenches | Soaks into soil through trenches | Desludging and a yearly level check | Septic contractor and licensed plumber |
| Septic tank with evapotranspiration bed | Soil, plants and evaporation | Desludging and a yearly level check | Septic contractor and licensed plumber |
| Septic tank with pump-out well | Collected by a tanker | Pump-outs on a set schedule | Liquid waste contractor |
| Aerated wastewater treatment system | Treated, disinfected and irrigated | Service every three months | Agent authorised by the maker |
The Australian and New Zealand standard for septic tanks is AS/NZS 1546.1:2008. AS/NZS 1547:2012 covers on-site domestic wastewater management, including the design of land application areas. AS 1546.3:2017 deals with secondary treatment units, which treat effluent further than a basic septic tank, and NSW Health accreditation certificates for aerated units refer to it. Details of each edition are published by Standards Australia, and the numbers can appear on design reports and council approvals.
Aerated Wastewater Treatment Systems Explained
An aerated wastewater treatment system, or AWTS, treats household wastewater to a higher standard than a basic septic tank. Guidance from Wingecarribee Shire Council describes the tank as having several chambers with pumps and chlorine disinfection. The tank connects to a land disposal system, such as sprinklers or subsurface irrigation that runs below the lawn. Air is pumped into one chamber so that bacteria which need oxygen can break down the waste. Fujiclean makes the ACE1200, a residential treatment unit sized for up to eight people.
Because the unit relies on electric pumps and an alarm, it needs a constant power supply. Wingecarribee Shire Council tells owners that the power supply and irrigation pipeline must stay connected to the tank at all times. If an alarm sounds or a warning light shows, the council advice is to contact your service agent. A tripped circuit or a faulty power point feeding the unit is a job for a licensed electrician, not the septic contractor.
Accreditation certificates from NSW Health set a free residual chlorine reading between 0.2 and 2.0 mg/L in the treated water. Free residual chlorine is the disinfectant left in the water after treatment, measured in milligrams per litre. The same range appears on the Wingecarribee Shire Council service report form that agents complete at each visit. Your agent should explain any reading outside that range and what they did to correct it. Keep the reports in one folder so you can see whether the same fault returns.
Register entries for aerated units carry labels such as Advanced or Nutrient Reduction, along with the number of people each model serves. Taylex, for example, has nutrient reduction models listed for nine and ten people. Your council or system designer can tell you which treatment level the site needs before you choose a model. Match the people rating on the certificate to the number of people who will live in the home. Certificates carry expiry dates, so check the date on the register before you order a unit.
Section 68 Approvals From Your Council
Section 68 of the Local Government Act 1993 lists activities that need council approval before they happen. Its waste items include installing, constructing or altering a waste treatment device or human waste storage facility, and any drain connected to one. Another item covers operating a system of sewage management, which is the legal name for running an on-site system. You can read the Act on the NSW legislation website. So one approval lets you put a system in or change it, and a second approval lets you keep using it.
On the Central Coast, an application to install an on-site sewage management system must go to Central Coast Council before any new system goes in. All on-site systems in its area must be registered with the council, and an approval to operate is required. Internal plumbing and drainage work on the same job carries its own inspection fee. Further south, Wingecarribee Shire Council takes applications to operate through the NSW Planning Portal as a section 68 application. Its form asks for a site plan showing the tanks, the disposal or absorption areas and their distances to boundaries and buildings. Council checks the application for completeness and then sends a fee quote before lodgement.
| Approval or Check | Who Issues It | What It Covers |
|---|---|---|
| Install, construct or alter a system | Local council (section 68) | Tank, treatment unit and connected drains |
| Operate a system of sewage management | Local council (section 68) | Ongoing use of the system on your land |
| Accreditation of the model | NSW Health | Make and model only, not drains or disposal areas |
| Plumbing and drainage inspections | Building Commission NSW or the delegated council | Drains before backfilling and the final inspection |
| Certificate of Compliance | Licensed plumber or drainer | Completed plumbing and drainage work |
Council approval and NSW Health accreditation are two separate checks. Accreditation applies to the make and model of a tank or treatment unit. Council approval applies to the system installed on your land, including the drains and the disposal area. AWTS owners in the Wingecarribee Shire are told not to modify the unit or its irrigation without council consent, and the council can issue penalties when a system is not maintained.
Approval to Operate, Risk Ratings and Inspections
Approval to operate is the council licence that lets an owner keep using an on-site system. In the Southern Highlands, approvals under Wingecarribee Shire Council rules run for 2, 3 or 5 years, depending on the risk rating of the system. Low-risk approvals last five years, moderate-risk approvals three years and high-risk approvals two years. Under its sewage management strategy, the council aims to inspect systems at regular intervals, and fees are paid when an approval is issued. Keep the approval with your property papers so you know when it expires.
Inspections in the Shoalhaven happen every five years, or more frequently where a system is rated high risk. Risk factors used by the council include closeness to sensitive areas or water bodies, how much ongoing management the system needs, public contact and commercial use. Many older systems, especially those installed before 1999, would not have had an approval to operate, according to the same council. Owners of an older home should check with council whether an approval exists for their system. If none exists, council staff can explain the steps to apply. Applying early avoids a rush when you later sell the property or change the system.
NSW Health Accreditation for Tanks and Treatment Units
NSW Health describes accreditation as the only role the law gives it in wastewater systems for single homes that are not on the sewer. It accredits septic tanks, collection wells, aerated wastewater treatment systems, greywater treatment systems and composting toilets. The scheme covers facilities that treat sewage from premises with no more than 10 people, or with an average daily flow below 2,000 litres. Under the Local Government (General) Regulation 2021, a council must not approve the installation of certain facilities unless the model is accredited. Accreditation does not extend to the drains connected to the facility or to any land application system.
Each accredited model has a certificate with a number and an expiry date. A register of accredited AWTS models is published by NSW Health, and it names makers such as Taylex, Fujiclean and BioSeptic. Before you accept a quote for a new unit, compare the model name with the register and confirm that the certificate is current. Request a copy of the certificate from the installer, because its conditions set the servicing rules you will follow.
Quarterly Servicing Rules for AWTS Owners
Each NSW Health accreditation certificate we checked for an aerated unit sets servicing at three-monthly intervals once the unit is commissioned, or first switched on. The certificates we checked also require the owner to hold a service contract or agreement of at least 12 months. The service agent must be employed or authorised by the maker or supplier of the unit. After each service, the agent sends a completed NSW Health Local Council Service Report to council. Owners may not service the unit themselves unless they are an authorised agent. Quarterly servicing is described by Wingecarribee Shire Council as a mandatory requirement under council and NSW Health approval conditions.
You can see what the agent checks on each visit from the service report form. Items on the forms include the alarm system, the chlorine reading and whether the tank needs desludging. The agent judges the sludge and scum levels and records whether a pump-out is required. Owners applying to Wingecarribee Shire Council for an approval to operate an AWTS must attach the last service report. Keep every copy, because the latest report goes with your next application.
An AWTS service visit is estimated at $150 to $620 for 2027, and an annual service contract at $600 to $1,500. Get each agent to quote the yearly contract price, the number of visits included and the cost of parts on top. Compare chlorine supply, alarm call-outs and pump-out arrangements line by line between quotes. Also confirm whether the agent lodges the council service report as part of the fee.
Desludging a Septic Tank: How Often and What It Involves
Desludging means pumping the sludge and scum out of a septic tank so the tank keeps enough room to settle solids. Shoalhaven City Council's septic brochure advises desludging every three years to stop sludge clogging the pipes and absorption trenches. The same brochure recommends a yearly contractor check of the scum and sludge levels. The council's current web page refers to a cleanout every few years, so the right interval depends on your system and your council. Follow any interval written into your council approval, as that condition applies to your property.
On the day, the contractor needs clear access to the tank lids and a safe place to park the tanker. Mark the lids before the visit if they are buried under lawn or garden beds. Where nobody knows the tank position, a plumber can locate buried lines and mark their depth, estimated at $150 to $400 for 2027. After the pump-out, the contractor should note the tank condition, any cracked lids and the state of the inlet and outlet fittings. Keep a record of pumping, inspections and other maintenance, as Shoalhaven City Council advises. Grease traps, the small tanks that catch kitchen fats before the main tank, need far more frequent cleaning where fitted, and the same brochure advises a clean-out at least every two months.
Before the Pump-Out Truck Arrives
Find and uncover the tank lids, then clear a path from the driveway for the hose. Tell the contractor about locked gates, steep ground or soft lawn that a heavy vehicle should avoid. Keep children and pets inside while the tank is open.
Write down the date, the volume removed and any defects the contractor reports. Shoalhaven City Council advises desludging every three years and a yearly check of scum and sludge levels. For an aerated unit, follow the pump-out advice the service agent records at each quarterly visit.
A septic pump-out is estimated at $380 to $1,200 a load for 2027, depending on tank size and travel. Locating and depth marking of buried lines is estimated at $150 to $400 for 2027.
Warning Signs That a System Is Struggling
Signs of a failing septic system are listed in the Shoalhaven City Council brochure for owners. They include water that drains too slowly, drain pipes that gurgle and sewage smells, which the council treats as a serious problem. Water backing up into a sink may mean the system is already failing, according to the same brochure. Wastewater surfacing over the land application area is another sign to act on. Book a licensed plumber or septic contractor as soon as any of these signs appears.
Aerated systems have their own set of warning signs to watch for. Owners in the Wingecarribee Shire are told to check for smelly or over-saturated areas, leaking or broken irrigation pipes and blocked sprinklers. The council also advises fitting enough sprinklers to avoid ponding, which is treated effluent pooling on the surface. Any alarm or warning light on the unit also needs a call to the service agent. Note the date and what you saw, as the agent will want to know how long the problem has been present.
Slow drains and gurgling can come from the drain between the house and the tank, not the tank itself. A plumber can clear a blocked drain, estimated at $150 to $600 for 2027, or run a drain camera through the line to find a crack or roots. Camera surveys cover only the pipework between the house and the tank, so they cannot report on the tank or the disposal area. Tank inspections are a separate service, so check which one each quote includes.
Each kind of septic problem goes to a different trade. A full tank or a pump-out well near its limit is a job for a liquid waste contractor. Alarms, warning lights and chlorine problems on an aerated unit go to the service agent named on your contract. Slow drains, gurgling and broken pipes between the house and the tank need a licensed plumber or drainer. Questions about approvals, inspections or changing the system go to the environmental health officer at your council. Power faults at the unit need a licensed electrician, since electrical work in NSW needs an electrical licence.
Looking After the Effluent Disposal Area
The effluent disposal area is the lawn, garden bed or trench field that receives treated or partly treated wastewater. For AWTS owners, Wingecarribee Shire Council advice is to keep this area landscaped and not to use it for recreation. Edible food crops should not be grown there, and heavy equipment should stay off it so the soil does not compact. Take care not to damage the irrigation pipeline when mowing. Sprinklers should not sit close to property boundaries, and warning signs belong at the edge of the irrigation area. Check the approved site plan before you plan a shed, pool or driveway near the disposal area.
Absorption trenches need the same protection from vehicles and digging. Sludge build-up can clog the pipes and absorption trenches, Shoalhaven City Council warns, which is one reason it advises regular desludging. Such systems also have the potential to contaminate groundwater and are not recommended in sensitive locations or higher density developments, according to the council. If your trench area stays wet, get a plumber to check the tank and the trench together.
Garden projects near the disposal area should be planned around the system. Landscapers and irrigation installers need the approved site plan before digging trenches or laying new pipes. Tell any irrigation installer which pipes carry effluent, so new garden lines are never joined to them. For the clean-water side of the property, get separate quotes for garden watering systems and rainwater tank plumbing. Keep any work on the effluent irrigation itself with your AWTS service agent or a licensed plumber.
What Should Not Go Into a Septic System
According to Shoalhaven City Council, what goes down your drains and toilets affects how well an on-site system performs. Its brochure advises against putting bleaches, disinfectants, whiteners, nappy soakers and spot removers into the tank. Nappies, sanitary products, condoms and other hygiene products should not be flushed at all. Fats and oils belong in the bin, and detergents should be used at no more than the recommended amounts. The brochure also warns against garbage grinders and spa baths where the system was not designed for them. Spreading laundry loads across the week avoids surges into an AWTS, Wingecarribee Shire Council adds.
The bacteria inside a tank do the treatment work, so harsh chemicals upset the process. For this reason, Wingecarribee Shire Council asks AWTS owners not to put bleach or large amounts of disinfectants and cleaning products down the drain. Leaking taps and running toilets also add water that the system then has to handle. You can stop that extra flow with a fixture repair or a leak detection visit before it reaches the tank.
Steps in Installing a New On-Site System
Installing a new on-site system follows a set order of approvals and inspections. The owner or designer first chooses a system type and an accredited model that suits the household and the block. An application to install then goes to council under section 68, with a site plan showing the tank and the disposal area. Once council approves it, the licensed plumber or drainer lodges a Notice of Work, the form that tells the plumbing regulator about the job, and books inspections. Drainage must be inspected before it is backfilled, meaning the trench is filled back in, or covered, so trenches stay open until the inspector has seen them.
One NSW Health certificate we checked says the owner must not commission the treatment unit before the land application system is finished. Commissioning means switching the unit on and starting treatment for the first time. The same certificate requires the unit to be installed to the accredited specifications, with access left for maintenance. After commissioning, the owner applies for an approval to operate and signs the service contract that the certificate requires. The plumber completes a Certificate of Compliance, the record that the plumbing and drainage work meets the rules, after the final inspection. Keep every document from the build in one folder, since later council applications draw on them.
Replacing a complete on-site system is estimated at $12,000 to $38,000 for 2027, and the site and soil assessment that comes first at $900 to $3,600. Quotes should separate the tank or unit, the drainage, the disposal area, any excavation and the council fees. A new absorption trench or land application area on its own is estimated at $4,500 to $16,000 for 2027. Locating existing buried lines before work starts is estimated at $150 to $400.
When Sewage Backs Up Into the House
Sewage coming up through a floor waste, shower or toilet is a health risk and needs prompt action. Stop using water in the house, including toilets, showers, the dishwasher and the washing machine, so no more wastewater flows to the system. Keep children and pets out of the affected area, and wear gloves if you must touch anything wet. For an aerated unit, check the alarm panel and whether the power is on, then call the service agent. If the blockage sits in the house drain, emergency attendance from a plumber is estimated at $180 to $350 for 2027. Once the immediate problem is fixed, book a pump-out or a drain camera check to find the cause.
Septic Service Prices in NSW (2027 Estimates)
Septic pricing in NSW changes with the type of system, the size of the tank and the travel to reach the property. Septic pump-outs are estimated at $380 to $1,200 a load and AWTS service visits at $150 to $620, while sewer connections and tank decommissioning are quoted per job. The bands below come from our NSW plumbing and regional plumber price guides and cover the tank, the treatment unit and the drains around them. Business-hours call-out fees are estimated at $80 to $150 across NSW, with regional call-outs at $60 to $120. Hourly labour is estimated at $90 to $180 in business hours and $150 to $250 after hours.
| Item | 2027 Estimate (NSW) | What Drives the Price |
|---|---|---|
| Call-out fee, business hours | $80-$150 | Distance and time of day |
| Call-out fee, regional NSW | $60-$120 | Travel to the property |
| Hourly rate, business hours | $90-$180 | Region and job type |
| After-hours hourly rate | $150-$250 | Nights, weekends and urgent work |
| Blocked drain clearing | $150-$600 | Blockage depth and access |
| High-pressure drain jetting | $250-$700 | Pipe length and blockage |
| Drain camera, standalone inspection | $250-$600 | Line length and access |
| Camera added to a clearing visit | $200-$450 | Line length |
| Camera inspection with written report | $350-$800 | Report detail |
| Locating and depth marking | $150-$400 | Buried lines and lids |
| Drain section dug up and replaced | $1,500-$4,000 | Depth, length and ground |
| Emergency attendance | $180-$350 | Time of day |
| Septic tank pump-out, per load | $380-$1,200 | Tank volume and travel |
| AWTS service visit | $150-$620 | Region, travel and parts |
| Annual AWTS service contract | $600-$1,500 | Visits and parts included |
| AWTS blower or aerator replacement | $520-$1,500 | Model and access |
| Effluent or irrigation pump replacement | $680-$2,000 | Pump size and access |
| Site and soil assessment | $900-$3,600 | Site and catchment rules |
| New absorption trench or land application area | $4,500-$16,000 | Soil and area size |
| Complete on-site system replacement | $12,000-$38,000 | Site, soil and treatment level |
| Sewer connection or tank decommissioning | Quoted per job | Distance and council conditions |
Get each contractor to price a pump-out by tank volume and to say whether any disposal charges are included. Long hose runs, locked gates and lids buried under soil can add time to the visit, so mention them when you request quotes. Combining a drain clear and a camera inspection on one visit saves a second call-out, and a camera added to a clearing visit is estimated at $200 to $450. Where the camera finds a broken section, digging it up and replacing it is estimated at $1,500 to $4,000 for 2027. Emergency attendance outside business hours is estimated at $180 to $350 before any repair work.
Cost Depth: Pricing the Work Around the Tank
Drain jetting uses a high-pressure water hose to clear roots and build-up from a pipe, and it is estimated at $250 to $700 for 2027. A standalone camera inspection is estimated at $250 to $600, rising to $350 to $800 with a written report.
Emergency attendance is estimated at $180 to $350, and a temporary make-safe visit at $200 to $600. After-hours labour is estimated at $150 to $250 an hour, so a booked daytime visit costs less when the problem can wait.
These are 2027 estimates for NSW from our plumbing and regional plumber price bands. Council fees, sewer connections and tank decommissioning are quoted per job.
Licensed Plumbers, Drainers and Council Inspections
Building Commission NSW is the plumbing regulator under the Plumbing and Drainage Act 2011. NSW requires a licence for any plumbing or drainage work, whatever it costs, so laying a drain to a tank or fitting a new tank is licensed work. Use the licence check on the Building Commission NSW pages to confirm the holder's name, licence number and expiry date before work starts. Enquiries go to 13 27 00, Monday to Friday from 8:30am to 5pm. Pumping out a tank is liquid waste work, so check which licences and council registrations the contractor holds in your area.
In regional NSW, Building Commission NSW has delegated plumbing inspections to local councils and other authorities. Outside Sydney, the Illawarra, the Blue Mountains and Newcastle, the plumber lodges a Notice of Work with the local plumbing regulator before work begins. Inspections are booked at set stages, including after drainage work is complete but before it is backfilled or covered. Once the final inspection is done, a Certificate of Compliance follows, with a copy to the person the work was done for. Keep it with the council approval and the service records for the system. You can find local trades through our Southern Highlands plumber and South Coast plumber pages.
Any trench for a new tank or drain needs the underground services located first. Before You Dig Australia provides plans of underground pipes and cables at no charge, and the plumber should lodge a request before digging. Larger digs may call for an excavation contractor working alongside the plumber. Safety rules for trenching and excavation on work sites are set by SafeWork NSW.
Tanks, Treatment Units and Pumps Sold in NSW
Septic tanks are made in concrete or in polyethylene plastic, known as poly, and treatment units come as one or two tanks. BioSeptic makes AWTS units and septic tanks, and Garden Master makes poly and concrete septic tanks at its Wodonga facility. Civilmart makes precast concrete septic tanks for rural properties, while Global Tanks makes poly septic and pump-out chambers. Coerco makes poly septic tanks ranging from 1,450 litres up to a 23,000 litre underground tank. Bushmans makes a 3,100 litre poly septic tank for homes of one to five people, and its product page lists final certification as pending.
For aerated systems, Ozzi Kleen makes the RP10 household treatment system and the GTS10 greywater treatment system. Rivatec makes wastewater collection and treatment systems, and the NSW Health register lists its RWT10 models. Taylex makes advanced secondary treatment systems and septic systems, and several Taylex models appear on the same register. Davey makes submersible grinder pumps for septic effluent and raw sewage, and Grundfos makes SEG sewage grinder pumps for pressurised networks. Grinder pumps chop soft solids into a slurry so wastewater can travel through a small pipe. Brand names here are for identification only, so check each model against the register and your council approval.
Replacing a tank or treatment unit counts as installing or altering a facility, which needs council approval under section 68. The new unit must be an accredited model where NSW Health accredits that type of facility. Find out from the installer whether the existing disposal area suits the new unit or must be redesigned. Get that answer in writing before you pay any deposit.
Buying or Selling a Property With a Septic System
Approvals to operate in the Wingecarribee Shire do not pass to a new owner. Buyers there must apply for a fresh approval, even if the seller's approval is still current, the council states. New owners there have three months from the transfer to lodge the application. Other councils set their own rules, so a buyer should contact the local council to learn what applies. Before exchange, get the current approval, the site plan and recent service or pump-out records from the seller.
Check whether your building inspection report includes the septic tank and the disposal area. Plumbers can run a camera through the drain from the house to the tank, and an inspection with a written report is estimated at $350 to $800 for 2027. Opening the tank to check sludge levels, lids and fittings is a separate service from the camera survey. Book both early enough to negotiate with the seller if repairs are needed. Buyers planning extra bedrooms or a granny flat should raise the septic system with council before settlement.
Sellers can prepare by booking a service or pump-out before listing and gathering the paperwork in one folder. Include the council approval, service reports, the site plan and any Certificate of Compliance for recent drainage work. Fix obvious faults such as broken lids or a sounding alarm before inspections start. Buyers will ask for these papers, and having them ready avoids delays during the sale.
Moving From a Septic Tank to the Sewer
Sewer mains are sometimes extended into areas that relied on on-site systems. Sydney Water is planning new wastewater servicing for part of Menangle village, where homes currently rely on on-site sewage management systems. In some parts of that project, a pressure system is proposed, where a pump pushes wastewater from a tank through a sealed pipe into the network. When a new main reaches your street, contact the water authority or council to learn whether connection is required and by when. The drainage work from the house to the connection point needs a licensed drainer or plumber, an inspection and a Certificate of Compliance.
Once the house is connected, the old septic tank must be dealt with safely. Central Coast Council requires owners demolishing an old septic tank to follow the procedure in NSW Health Advisory Note 3. Those advisory notes have since been removed from the NSW Health website, so confirm with your council which procedure it now applies. Get the plumber to list the pump-out, the work on the old tank and any council fees as separate lines on the quote. We have no NSW price band for decommissioning a tank or for a sewer connection, so both are quoted per job. Faults in the new line after connection are a separate job, handled as sewer line repairs.
Septic Faults in Rented Homes
Tenants in a rented home on a septic system should report faults to the landlord or agent in writing. NSW tenancy rules list a blocked or broken toilet as an urgent repair, along with a burst water service or serious leak. If the landlord or agent cannot be reached, the tenant may arrange the repair with a licensed tradesperson and be repaid up to $1,000. The landlord or agent must pay that amount back within 14 days of the tenant's notice. Under Wingecarribee guidance, the AWTS owner holds the approval to operate and the legal responsibility for correct operation of the system.
Tenants can help by following the same care rules as owners, such as keeping fats, wipes and harsh chemicals out of the drains. Tell the agent straight away if an alarm sounds or the yard smells of sewage. Give the service agent access to the tank on service days, and keep pets away from open lids. When sewage backs up into the house after hours, you can find an emergency plumber through our listings.
Getting Useful Quotes for Septic Work
Start by describing the system type, its age and the problem you have noticed. Photos of the tank lids, the alarm panel and the disposal area help a contractor quote accurately. Include the council approval number and the date of the last pump-out or service if you have them. Say how far the tank sits from where a truck can park, and whether gates or slopes are in the way. Request at least two written quotes so you can compare the scope as well as the price.
Residential building work over $5,000 including GST needs a written contract in NSW, which can apply to a new system or a sewer connection. The deposit on contracted work is capped at 10 per cent. Statutory warranties, which are protections set by law, cover major defects for six years and other defects for two years, counted from completion. Check the licence number on each quote against the NSW licence check before you sign. Find out who lodges the council applications and service reports, and whether those fees are in the price. Compare the call-out and hourly figures in each quote with the rates in our NSW plumber pricing guide.
Paperwork to Keep for an On-Site System
Keep the council approval to operate, the approved site plan and the NSW Health certificate for your tank or unit. Add each service report, pump-out receipt and invoice as it arrives. Shoalhaven City Council advises owners to keep a record of pumping, inspections and other maintenance.
File any Certificate of Compliance for drainage work beside the matching invoice. Wingecarribee Shire Council asks AWTS owners applying for an approval to operate to attach the last service report. A buyer will also ask for these papers when the property is sold.
Contract rules come from NSW home building law: work over $5,000 including GST needs a written contract, and deposits are capped at 10 per cent.
What to Look Out For in Septic Tank Service Quotes and Contracts
Be wary of a quote for a new tank or treatment unit that does not name the make, model and NSW Health certificate number. Any quote to install or alter a system with no mention of council approval leaves the compliance risk with you. Watch for AWTS contracts that do not say who sends the service report to council after each visit. Check that a pump-out quote states the tank volume it covers, because a price for a smaller tank will not match your system. Be cautious if someone the maker has not authorised offers to service an accredited unit. Only an authorised agent may service these units under the NSW Health certificates.
Drain work quoted without a licence number, a Notice of Work or a Certificate of Compliance is a warning sign. So is a request for full payment before the work starts, or a deposit above 10 per cent on contracted work. Get a second opinion when a contractor recommends replacing the whole system without a camera inspection or tank report. Compare warranty terms for the workmanship and for the tank or unit itself before you sign.
Other Plumbing Work on a Property With a Septic System
Homes on septic systems need the same plumbing inside the house as homes in town. Tell the plumber about the septic system before any toilet installation or bathroom work, because new fixtures drain to the same tank. Small jobs such as a tap and mixer installation can be booked on the same visit as a drain clear to share the call-out fee. Rural homes that also run on tank water may notice weak flow at the taps, and a plumber can test the pump and pipes during a low water pressure repair visit. Each job is licensed plumbing work, so the same paperwork rules apply.
Greywater is the water from showers, basins and laundries, without toilet waste. On sewered blocks, a greywater diversion system sends some of it to the garden through subsurface lines. Treatment units for greywater also need NSW Health accreditation, and greywater system installation and maintenance can be quoted as its own job. On an unsewered property, check any change to where household wastewater goes against the council approval first.
Some jobs on a rural property need a different licence from plumbing and drainage. Where gas heaters warm the house in winter, you can book a licensed gasfitter for gas heater servicing on a separate visit. Owners on the Central Coast, where every on-site system must be registered with council, can compare local plumbers on our Central Coast plumber page. Temporary make-safe visits after an overflow are estimated at $200 to $600 for 2027, before the repair itself. Septic work, drainage and indoor plumbing can all be posted as one job on The Quote Yard so you compare full quotes.
Septic Tank Services Across NSW
Find licensed plumbers, drainers and septic contractors for pump-out arrangements, AWTS servicing, drain clearing and new system installs in your area.
▶ Sydney Inner City 18 areas
▶ Greater Sydney 25 areas
Western Sydney
South Western Sydney
Northern Sydney
The Hills District
Inner West
St George
▶ Sydney Coastal 23 areas
Northern Beaches
Eastern Suburbs
Harbour Suburbs
Sutherland Shire
▶ Hunter & Central Coast 19 areas
Central Coast
Hunter Valley
Port Stephens
▶ Illawarra & South Coast 18 areas
Illawarra
Shoalhaven
Sapphire Coast
▶ North Coast 19 areas
Mid North Coast
Coffs Coast
Northern Rivers
▶ Blue Mountains & Highlands 17 areas
Blue Mountains
Southern Highlands
▶ Regional NSW 21 areas
Central West
Riverina
New England
Far West
Septic Tank Services FAQs - NSW
How often should a septic tank be pumped out in NSW?
Do I need council approval to keep using my septic system?
Can I service my own aerated wastewater treatment system?
What does a septic pump-out cost in NSW?
What happens to the septic approval when I buy a property?
Why does my yard smell near the septic tank?
Who can install a new septic tank in NSW?
Can I grow vegetables on the irrigation area of my AWTS?
What should I do when the AWTS alarm goes off?
Do I have to connect to the sewer when it reaches my street?
More Drainage and Water Services for Rural Properties
Related Services
For Trades & Contractors - NSW
Licensed plumbers, drainers and septic service agents working on unsewered properties can find current work on the NSW job leads board, along with plumber jobs in NSW and drainer jobs.
Need Septic Tank Services in NSW?
Post your job and compare quotes from licensed NSW plumbers and septic contractors for drain clearing, AWTS servicing, pump-out arrangements and new systems.
Get Free Plumber QuotesAbout This Guide
This guide is general information only, and council rules, NSW Health accreditations and prices can change. Confirm requirements with your local council, NSW Health, Building Commission NSW and a licensed plumber or drainer before work starts.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.