Looking for a Plasterer in Melbourne?

Tell us your suburb, the rooms involved, whether the walls are plasterboard, solid plaster or old lath and plaster, and roughly when the house was built. Mention any heritage listing, owners corporation or ornate cornice that needs matching. We will send that description to experienced plasterers around Melbourne, so every quote you receive prices the same job.

Get Free Plastering Quotes

Melbourne Plastering Price Guide

Small hole or crack patch$150 - $350
Large hole or part sheet$300 - $700
Full sheet replacement$400 - $1,200
New plasterboard, supplied and fixed$40 - $70 per m²
Cornice repair or replacement$25 - $60 per metre
Heritage run and cast cornice$50 - $120+ per metre
Re-fixing a sagging ceiling$450 - $1,300 per room
Replacing one room ceiling$950 - $2,600
Ceiling rose installation$300 - $1,500+
Asbestos sample collection and lab test$220 - $450

These are estimated Melbourne price ranges for 2027. Your price depends on the surface, the access, how much old material has to come out, and whether asbestos testing, an electrician or a painter is part of the job.

Hire a Plasterer Melbourne VIC - Get Local Quotes

Plastering in Melbourne ranges from filling hook holes after a lease to relining sagging lath and plaster ceilings (plaster on thin timber strips) in a Victorian terrace or matching ornate cornice in an Edwardian villa. Small repairs are mostly priced as a fixed sum after the plasterer sees the damage, while new walls and ceilings are priced per square metre of board. In Victoria, a business doing only plastering needs no building registration, whatever the size or value of the job. Registration with the Building and Plumbing Commission is needed when plastering is combined with painting, carpentry or other skills on a renovation. Many inner suburbs are covered by a Heritage Overlay, a council rule protecting older streets, but inside plastering needs a permit only where the council controls interior work. Houses built before 1990 may contain asbestos in sheeting and textured coatings, so suspect material should be tested before anything is cut or sanded. Apartment walls can form part of the building's fire protection, and approval from the owners corporation, the body of owners that runs the building, may be needed first. Renters moving out often need hook and screw holes repaired before the final inspection, and the law sets out who pays. The prices on this page are 2027 estimates drawn from Quote Yard guides for Victoria, before painting, access equipment or other trades. Post your job on The Quote Yard to reach local Melbourne plasterers who can quote on it.

Melbourne Plastering Work Covered

Plastering around Melbourne ranges from solid plaster and ornate ceilings in inner suburban terraces to plasterboard repairs in newer homes on the city fringe. We can connect you with experienced plasterers who all price the same written description of your job.

Get Free Quotes

At a Glance - Melbourne Plastering Prices 2027

Job Price Range How It Is Charged What Drives It In Melbourne Who Can Do It
Small hole or crack patch $150 - $350 Fixed price per repair Drying time and number of visits Plasterer or handyman
Large hole or part sheet $300 - $700 Fixed price per repair Board type and paint match Plasterer
Full sheet replacement $400 - $1,200 Per sheet Cornice and wall length Plasterer
New plasterboard $40 - $70 per m² Per square metre, supplied and fixed Board type and ceiling height Plasterer
Cornice repair or replacement $25 - $60 per metre Per linear metre Profile and number of corners Plasterer
Heritage run and cast cornice $50 - $120+ per metre Per linear metre Profile depth and matching Heritage plasterer
General ceiling repair $300 - $1,500 Fixed after inspection Sag, cracks and access Plasterer
Re-fix a sagging ceiling $450 - $1,300 per room Per room Lath and plaster or board Plasterer
Replace one room ceiling $950 - $2,600 Per room Room size and removal of the old ceiling Plasterer
Ceiling rose $300 - $1,500+ Per rose Size and level of detail Heritage plasterer
Asbestos sample and lab test $220 - $450 Per visit Number of materials tested Asbestos assessor
Licensed asbestos ceiling removal $90 - $180 per m² Per square metre Area and type of material Licensed asbestos removalist
Painting after repair $14 - $28 per m² Per square metre Number of coats and colour match Painter or plasterer

What Pushes a Melbourne Plastering Bill Up

What is involved
Older houses with lath, solid plaster or ornate cornice, the moulding along the ceiling edge, take longer than plasterboard. Matching an old cornice shape can need a new knife, a steel blade cut to that shape, or a mould before work starts.
Apartments add lift bookings, parking and building rules to the job. Fire-rated walls and ceilings must be repaired to match the original system.
Suspect asbestos in homes built before 1990 should be tested before cutting or sanding. A positive result means hiring a licensed removalist and adds days to the timetable.
Every coat of compound needs time to dry before the next one goes on. Small patches still need several visits, and each visit carries travel time.
Ask every plasterer to list labour, board, cornice, access equipment, rubbish removal and any asbestos testing on separate lines, so the quotes can be compared item by item.

Who Does Plastering Work Around Melbourne

Plastering in Melbourne covers everything from filling a few screw holes before a sale to relining every ceiling in a weatherboard house or restoring decorative cornice in a terrace. Most small repairs are priced as a fixed sum after a look at the damage, because the plasterer needs several visits to allow drying time between coats. Common repair types and their likely causes are listed in our Victorian plastering and Gyprock repairs guide. Larger jobs such as new walls, whole ceilings or a renovation are priced per square metre of board or per linear metre of cornice, plus access and rubbish. Few Melbourne plasterers publish an hourly rate, so prices here are given per job or per unit, and anything else is priced on quote.

Businesses that do plastering here range from sole traders who patch holes and set joints to crews who fix and finish the board in whole houses for builders. Setting means covering the joins between sheets with paper tape and jointing compound, then sanding the surface smooth for paint. Some plasterers specialise in solid and ornate plaster in older suburbs, and a handyman can often handle small patches, as our guide to handyman wall and plaster repairs explains. The right choice depends on whether your walls are plasterboard, solid plaster on brick or old lath and plaster, and how much of the job is cosmetic.

Melbourne Plastering Prices for 2027 by Repair and Room

The figures below are 2027 estimates drawn from Quote Yard price guides for Victoria, and they are not quotes for any particular home. A small hole or crack patch costs about $150 to $350, a larger hole or part sheet about $300 to $700, and a full sheet replacement about $400 to $1,200. New plasterboard supplied and fixed runs at about $40 to $70 per square metre, before cornice, painting or rubbish removal. Cornice repair or replacement is around $25 to $60 per linear metre, while heritage cornice shaped on site or cast in a mould costs about $50 to $120 or more. General ceiling repairs range from $300 to $1,500, and re-fixing a sagging ceiling costs about $450 to $1,300 per room. A ceiling rose, the round moulding around a ceiling light, costs about $300 to $1,500 or more, and each cornice style is covered in our guide to cornice installation and repairs.

Across Melbourne, the same guides put typical plastering jobs at about $200 to $1,400 in the inner and eastern suburbs and $150 to $1,100 in the north and west. Bayside and south east jobs cost about $200 to $1,300, and CBD apartment work at about $180 to $1,200, reflecting lifts, parking and building rules. The gap reflects the housing more than the postcode, since solid plaster and ornate ceilings take longer than plasterboard in a newer house. CSR Gyprock makes plasterboard ranges including Soundchek, Aquachek and Fyrchek, along with cornices, jointing compounds and cornice cement. Siniat makes plasterboard, metal framing and compounds at its own Australian plants, and either brand may be named on a Melbourne quote.

Job Melbourne Range How It Is Charged What Moves It
Small nail or screw hole $30 - $80 each Per hole, often grouped Number of holes in one visit
Fist-sized hole $80 - $180 Per repair Patch method and paint
Crack repair $40 - $100 per metre Per linear metre Whether the crack keeps moving
Water damaged area $200 - $600 Per affected area Size of stain and board damage
Re-fixing a sagging ceiling $450 - $1,300 per room Per room Ceiling type and access
Replacing one room ceiling $950 - $2,600 Per room Room size and cornice
Square set finish (a plain sharp corner) instead of cornice $30 - $60 per metre extra Per linear metre Straightness of walls and ceiling
Ceiling rose installation $300 - $1,500+ Per rose Size and detail
New knife for a heritage cornice profile $400 - $1,200 Fixed fee Complexity of the profile
Painting after repair $14 - $28 per m² Per square metre Paint system and colour match

Why Plastering on Its Own Needs No Builder Registration

Consumer Affairs Victoria lists plastering among the trades that do not need registration when the work involves only that trade. The same list includes tiling, painting, glazing, insulating and installing floor coverings, as well as electrical and plumbing work covered by separate licences. That means a plasterer who hangs and sets every ceiling in a house can legally work unregistered, as long as plastering is all the contract covers. Consumer Affairs Victoria also says a person must be registered when using a combination of skills, such as plastering and painting, to complete a renovation or repair. Registration is also required for work that needs a building permit, such as restumping or demolition, regardless of its value.

Separately from registration, the Domestic Building Contracts Act 1995 governs contracts to build, renovate or extend a home in Victoria. The Building and Plumbing Commission, known as the BPC, says a major domestic building contract, a written contract in a form the law sets, is needed when domestic building work costs more than $10,000. That threshold rose from $5,000 in July 2017, and the contract is the main record of what was agreed if anything goes wrong. For a plastering-only job, ask the plasterer to put the scope, price and payment stages in writing whatever the size. For plastering bundled into a kitchen, bathroom or extension, the main contractor's contract is the one that matters. Check that the plastering is included in that contract rather than in a separate arrangement paid in cash.

Plastering outside the registration rules is still covered by the consumer guarantees in the Australian Consumer Law, including due care and skill. The result must also suit any purpose you told the plasterer about, such as a ceiling that will be finished in a gloss paint. A written quote listing the rooms, the board type, the finish and the number of coats gives you something to measure the result against. Consumer Affairs Victoria can give advice on these consumer guarantees if a plastering job goes wrong.

Does Your Plastering Job Need a Registered Builder?

Type of work
How Victorian rules treat it
Patching and setting only
No registration needed for plastering alone
New plasterboard through a whole house
No registration if the contract is plastering only
Plastering and painting in one contract
Registration needed for combined skills
Work that needs a building permit
Registration needed regardless of value

Where a registered builder hires the plasterer, your contract is with the builder.

Plastering-only jobs can still be measured against the Australian Consumer Law guarantees.

If a quote combines plastering with painting, carpentry or tiling, ask whether the business is registered with the BPC before you sign anything.

Checking a Plasterer or Renovator on the BPC Register

The BPC registers builders in classes, and two limited classes relate directly to this trade: sheet plastering, and solid plastering and rendering. Sheet plastering covers cutting and fixing interior wall board, while solid plastering covers applying wet plaster or render, a cement based coating, to inside or outside surfaces. A plasterer may hold one of these classes even though plastering alone does not require it, which can be a useful sign of experience. Use the practitioner search on the Building and Plumbing Commission website to check a name, registration number, class and any conditions. Make sure the name on the register matches the name on the quote, the contract and the invoice.

Plastering jobs often involve other licensed trades, and each one needs its own paperwork. Moving a power point, adding downlights or running a cable through a new wall is electrical work for a licensed electrician working for a registered electrical contractor. Energy Safe Victoria says you should receive a Certificate of Electrical Safety, the electrician's signed record, within 30 days for most work, and within four days for prescribed work, a category of higher risk installations. Moving a basin or tap before a bathroom wall is relined is a job for a plumber who holds a licence or registration. For the electrical side, see our page on electricians in Melbourne. Bulkheads, boxed-in sections of ceiling that hide air conditioning ducts, are a common overlap, and our guide to bulkhead and pelmet installation covers that work.

Work Trade Licence or Registration Documents You Should Get
Patching, setting and sanding Plasterer or handyman None for plastering alone Written quote and invoice
Plastering combined with other trades Registered builder or renovator BPC registration Major domestic building contract over $10,000
Solid plaster and render Solid plasterer Optional limited class with the BPC Written quote listing each coat
Power points and downlights Electrician Licence from Energy Safe Victoria Electrical safety certificate
Moving taps or basins Plumber Plumbing licence or registration with the BPC Compliance certificate from the plumber
Removing asbestos sheeting Licensed asbestos removalist WorkSafe Class A or Class B licence Clearance paperwork where required

Deposits and Home Warranty on Renovations That Include Plastering

From 1 July 2026, the BPC provides Home Warranty, state-run cover for home owners, for eligible domestic building contracts worth more than $20,000. It replaced domestic building insurance, which applied to work worth more than $16,000 under contracts signed before that date. Home Warranty may help when eligible work is incomplete, defective or non-compliant, with up to $400,000 in total assistance per home. Major defects can be covered for up to six years after completion, and other defects or non-compliant work for up to two years.

Whether a plastering-only contract is eligible is a question to put to the BPC, because its Home Warranty page says exclusions apply without listing every trade. Cover matters most when plastering forms part of a renovation, extension or bathroom job run by a registered builder. Consumer Affairs Victoria warns that you cannot get Home Warranty insurance if the builder is not properly registered. Ask the builder for the Home Warranty details in writing before you pay any deposit. Cover does not extend to residential buildings over three storeys that contain more than two homes, which rules out many Melbourne apartment towers.

Consumer Affairs Victoria says the law limits a building deposit to 10 per cent when the contract price is below $20,000, and to 5 per cent at $20,000 and above. Once that deposit is paid, you pay only for stages that are complete, never in advance. On a larger renovation, internal linings such as plasterboard are normally paid for as part of the fixing stage. Before each progress payment, check the work is complete and matches the contract. A small plastering job may simply be invoiced on completion, which keeps your money in your hands until the walls are finished.

Contract Value and the Rules That Apply

$20,000, the value above which Home Warranty applies to eligible contracts signed from 1 July 2026
Contract value
What applies
Plastering only, any value
No BPC registration needed
Combined trades over $10,000
Major contract with a registered builder
Contract below $20,000
Deposit limit of 10 per cent
Contract of $20,000 and above
Deposit limit of 5 per cent, plus Home Warranty for eligible work

Pay for finished stages, never for work that has not started.

Keep every receipt until the defects periods have passed.

Never pay a deposit larger than the legal limit, whatever explanation the builder offers for needing it.

Heritage Overlays and Ornate Plaster in Inner Melbourne

Many inner and middle ring suburbs sit under a Heritage Overlay, which is a rule in each council's planning scheme, its local land use rulebook, that protects the character of a street or building. The overlay rules are set out in Clause 43.01 of the scheme, and most of the work needing a permit is work that changes how a heritage place looks. A planning permit to internally alter a building is needed only if the overlay's schedule identifies the property as one where internal alteration controls, meaning rules on changes inside, apply. Where the schedule does not name internal controls, the overlay does not require a permit for internal work such as a new ceiling. Repairs and routine maintenance that change the appearance of a heritage place, or that do not use the same details and materials, can need a permit. Your council's schedule to the overlay is the document that settles the question for your address.

Places on the Victorian Heritage Register are treated differently, because they are protected at state level. Heritage Victoria says you will generally need a permit for interior works on a state listed place, though exemptions are possible for work that will not harm its significance. The Heritage Victoria website explains how to apply for a permit or an exemption. In the City of Melbourne, the council's CoMMaps interactive map shows whether a property has a Heritage Overlay or a state listing. For other councils, a planning property report from the Victorian planning website lists the overlays that apply to an address.

Ornate plaster adds its own cost, whatever the planning rules say. Restoring a shaped cornice can mean running a new length on site with a knife, a steel blade cut to match the old shape, or casting it in a mould. Quote Yard figures put a new knife at about $400 to $1,200 and heritage run and cast cornice at about $50 to $120 or more per metre. Painting heritage interiors is a separate trade, and our guide to heritage home painting covers what usually follows the plasterer.

Status When a Permit Is Needed Who Decides What to Ask the Plasterer
No heritage control No planning permit for internal plastering Not applicable Standard written quote
Heritage Overlay, no internal controls Only for work that changes the appearance Local council Like for like materials on show
Heritage Overlay with internal controls Permit to internally alter the building Local council How original detail will be kept
Victorian Heritage Register Generally for interior works, unless exempt Heritage Victoria Experience with state listed places
Rental on the Heritage Register Renters need consent for picture hooks Rental provider Who restores holes at the end

Lath and Plaster in Victorian and Edwardian Houses

Older Melbourne houses, especially Victorian and Edwardian homes, often have lath and plaster walls and ceilings rather than plasterboard. Lath is a row of thin timber strips nailed across the frame, and wet plaster was pushed through the gaps so that it locked on behind them. Over many decades those locks can break, so a ceiling may sag, crack in a spider pattern or sound hollow when tapped. Brick houses of the same era usually have solid plaster applied straight onto the inside face of the brick walls. Both systems behave differently from plasterboard, so a plasterer who mostly works in new estates may price them very differently from a restoration specialist.

There are three common ways to deal with a failing lath and plaster ceiling. The plasterer can re-fix it with screws and wide washers, line over it with new plasterboard, or pull it down and replace it. Re-fixing keeps the original surface and cornice, but it only suits ceilings that are still mostly sound and firmly attached across most of the room. Lining over is cleaner and faster, though it lowers the ceiling slightly and can bury the line of an ornate cornice. Pulling down produces a large amount of heavy, dusty rubble, and old ceilings can hide decades of dust and debris above them. Quote Yard figures put re-fixing at about $450 to $1,300 per room and replacing a room ceiling at about $950 to $2,600.

Movement cracks are common in these houses, especially where old footings, the base the walls stand on, sit on clay that swells when wet and shrinks when dry. A plasterer can scrape out and fill a crack, but it will return if the walls are still moving. If cracks are wide, run at an angle from door or window corners, or keep growing, ask for a structural check first and see our guide to wall crack repair. Restumping, which replaces old house stumps, and underpinning, which strengthens foundations, are separate trades, and the plastering should wait until that work has settled. Paths and slabs that crack at the same time suggest the same ground movement, and our Melbourne concreter hiring guide explains how that trade deals with it.

Telling Lath, Solid Plaster and Plasterboard Apart

What you notice
What it usually means
Wall sounds solid and feels cold
Solid plaster on brick
Ceiling sounds hollow with fine cracks
Lath and plaster coming loose from the timber
Paper face visible at a hole
Plasterboard
Thin fibre sheet behind a patch
Possible asbestos cement, so test first

Photos of any existing hole help a plasterer price the right method.

Old ceilings may hold heavy dust and debris that adds to the rubbish load.

A lath and plaster ceiling that sags or bulges can fall without warning, so keep people out of the room until it is checked.

Asbestos Checks Before Cutting Into Pre-1990 Walls and Ceilings

The Victorian Government's Better Health Channel says homes built before 1990 may contain asbestos, and those built before the mid-1980s are highly likely to. Textured paint, ceiling insulation and flexible building boards are among the products it lists, and plasterers come across all of them when cutting, sanding or removing old wall and ceiling surfaces. Older homes can also have fibre cement sheeting in wet areas, eaves and extensions, which can look like plasterboard once painted. Testing a sample before work starts costs far less than cleaning up after asbestos dust has spread through a house, its carpets and its ceiling space. Quote Yard figures put sample collection and lab analysis at about $220 to $450, and a full residential inspection and report at about $300 to $700. Our guide to asbestos testing and inspection explains sampling, and the Melbourne asbestos removal cost guide covers removal prices.

Victorian rules let someone remove non-friable asbestos without a licence only if the area is no more than 10 square metres and the work takes no more than one hour in any seven days. Non-friable means the asbestos is bound into a solid material such as cement sheet, while friable material can crumble by hand and needs a Class A licence to remove. Anything beyond those limits needs a licensed removalist, and the WorkSafe Victoria website lists licence holders. Waste must be wrapped in two layers of 0.2 mm polythene and taken only to a site licensed by EPA Victoria to accept asbestos, as the Victorian asbestos website explains.

Before a Plasterer Cuts Into an Older House

Step
What it tells you
Check the build date
Before 1990 means asbestos is possible
Test suspect sheeting and coatings
A lab result before any cutting
Read the result with the quote
Who removes it and at what cost
Collect clearance paperwork
Proof the area is ready for the plasterer

Quote Yard figures put licensed asbestos ceiling removal at about $90 to $180 per m².

Textured ceiling coatings in older homes should be tested before any sanding starts.

Never let anyone sand, drill or cut an untested textured ceiling or sheet wall in a house built before 1990.

Fire-Rated Walls and Ceilings in Melbourne Apartments

Apartment buildings rely on passive fire protection, built-in barriers that slow fire and smoke, which the BPC describes as systems that need no switching on. Fire-rated walls, built to resist fire for a set time, and floors between apartments are part of that protection, often relying on layers of special plasterboard fixed in a tested arrangement. The BPC's research into multi-owned residential buildings found that most defects were likely to relate to improper penetrations in fire and smoke rated walls. A penetration is any hole through the wall or ceiling, such as a cut for a downlight, a power point, a pipe or an air conditioning line. Patching such a hole with ordinary compound can leave a gap in the building's fire protection even when the wall looks finished.

Before any plastering in an apartment, ask the owners corporation or building manager which walls and ceilings are fire rated. Repairs to those surfaces should match the original system, including the board type, the number of layers and any fire-rated sealant around services. Promat makes fire protection boards and fire stopping products that seal gaps where pipes and cables pass through fire-rated walls. Sika makes sealants, including a range it lists under passive fire protection. If a split system or ducted unit is going in at the same time, its holes need the same care, so involve the air conditioning installer early. Keep any paperwork that describes the fire-rated system and the products used, because the owners corporation may ask for it.

Penetration Risk to the Fire Rating What to Ask For
Downlight in a rated ceiling Hole through the fire barrier A detail that keeps the rating
Power point in a separating wall Electrical box cut through the board layers Electrician and plasterer agree the method
Air conditioning pipes Gap left around the pipes Fire-rated sealant around services
TV wall mount fixings Holes into a rated wall Building manager approval before drilling
Ceiling access panel Opening in a rated ceiling Rated panel where the system needs one

Owners Corporation Approval for Shared Walls and Ceilings

Consumer Affairs Victoria says a lot owner must not repair, alter or maintain common property, the parts all owners share, or a shared service without the owners corporation's clear permission. In many buildings the structure counts as common property, and the boundary between your lot and the common property can run through a wall or ceiling. Your plan of subdivision, the official map of the lots, shows where those boundaries sit, and the owners corporation manager can usually help you read it. Check it before you book a plasterer, because the answer decides whether you need approval at all and who pays for the repair.

Owners corporation rules can also set working hours, lift bookings, rubbish removal and protection for shared corridors. Plasterers carrying full sheets need a lift big enough for long boards, or a plan to carry them up the stairs without marking shared walls. Sanding creates fine dust that can travel through shared areas and set off smoke detectors, so ask how the crew will contain it. Hard floors laid at the same time may also need approval, which the Melbourne tiler hiring guide covers. When the work is finished, ask the plasterer to leave the corridors and lift as clean as they found them.

Before Plastering in an Apartment or Townhouse

Item
Who to ask
Lot boundaries
Plan of subdivision
Work on common property
Owners corporation, in writing
Fire-rated walls and ceilings
Building manager or owners corporation
Lift, parking and working hours
Building manager

Get approvals in writing before the plasterer orders any board.

Ask whether smoke detectors need isolating during sanding, and who arranges it.

Work on common property without authorisation can leave you paying to undo it, so wait for written approval.

Filling Hook and Screw Holes When a Melbourne Rental Ends

Victorian renters can install picture hooks or screws for wall mounts, shelves or brackets without asking, on any surface except exposed brick or concrete. That freedom does not apply if the property is on the Victorian Heritage Register, and a rental provider can refuse other changes where heritage protections would be affected. At the end of the lease, the renter must restore the property to its earlier condition, allowing for fair wear, or pay the reasonable cost of restoring it. Restoration is not required if the rental provider agrees, the agreement says so, or the renter paid a modification bond. A rental provider may also require changes to be completed by a suitably qualified person, which can mean a plasterer rather than a do it yourself repair with filler. The full rules for renters are on the Consumer Affairs Victoria website.

Small hook and screw holes are often grouped into one handyman visit, priced at about $30 to $80 each on Quote Yard figures. Anchors pulled out of plasterboard can leave fist-sized holes, which cost about $80 to $180 each and need sanding and paint to blend in. Selleys makes Spakfilla wall filler for small holes, while larger damage needs a patch or a new piece of board. Ramset makes hollow wall anchors, and the size of the anchor used decides how big the eventual repair will be. If you are moving out, the Melbourne removalist hiring guide helps plan the move, and bond cleaning usually comes last.

Change Consent Needed At the End of the Lease
Picture hooks on plaster walls No, unless on the Heritage Register Restore or pay the reasonable cost
Screws for TV mounts and shelves No, except exposed brick or concrete Restore or pay the reasonable cost
Furniture anchors No, except exposed brick or concrete Restore or pay the reasonable cost
Fixings into exposed brick or concrete Yes, refused only with a good reason As agreed with the rental provider
Change covered by a modification bond As agreed in writing Restoration may not be required

Plasterer, Handyman or Registered Renovator

There are three common ways to get plastering done in Melbourne, and the right one depends on the size and mix of the job. A handyman suits a few small patches, especially when the same visit covers other odd jobs such as hanging a door or fixing a gate. A specialist plasterer suits bigger areas, new walls, ceilings, cornice and anything involving solid or ornate plaster. A registered builder or renovator suits work where plastering is one part of a bathroom, kitchen, extension or structural repair.

The handyman route is quick and cheap for small holes, but the finish can vary on large flat areas under strong light. A plasterer charges more per visit but brings the tools and experience for long joints, high ceilings, cornice work and matching an old texture. Combining plastering with painting, carpentry or tiling under one contract means BPC registration is needed, so a renovator who does all of it should be registered. Our guide to hiring a handyman in Melbourne explains what that trade usually takes on. Whoever you choose, agree who paints after the plaster is finished, because many plasterers leave the wall ready for paint. Painting is quoted separately, as our guide to interior painting shows.

Levels of finish are where these routes differ most. AS/NZS 2589, the Australian and New Zealand standard for plasterboard linings, sets finish levels 3 to 5, and CSR guidance for Gyprock says homes are usually finished to Level 4, the standard home finish. Level 5 adds a skim coat, a thin layer of compound over the whole surface, and is recommended where light strikes walls at a sharp angle or where gloss paint is used. Floor to ceiling windows and downlights close to walls are examples that guidance gives of light that shows up every joint. You can look up the standard itself through Standards Australia, and ask each plasterer which level their price allows for.

Three Ways to Get the Plastering Done

Route
Best suited to
Handyman
A few small patches with other odd jobs
Specialist plasterer
Ceilings, new walls, cornice and solid plaster
Registered renovator
Plastering as part of a larger renovation
Owner managed trades
Owners with time to book and check each trade

Name the level of finish on every quote, so the prices compare like with like.

Ask whether the price includes a sealer coat ready for painting.

A business that plasters and paints a renovation as one job should be registered with the BPC, so check before you sign.

Electricians, Insulation and Pest Checks Behind the Board

While walls and ceilings are open, there is a short chance to do work that is much harder once the board is fixed. That is the time to add power points, data cables and downlight positions, and to fix timber backing for heavy items such as wall hung vanities, TVs or shelves. It is also the time to top up insulation, since wall cavities are rarely this easy to reach. Fletcher Insulation makes Pink Batts insulation and acoustic ranges such as Soundbreak and Pink Partition. Our guide to ceiling and wall insulation covers what installers charge. Quote Yard figures put insulation replacement during a ceiling job at about $20 to $50 per square metre.

Timber damage found behind old linings should be checked before new board goes up. Termites can hollow out wall studs and window frames without showing on the painted surface, and a plasterer may be the first to see it. If you find mud tubes, the thin earth tunnels termites build, or soft timber, stop and book a termite inspection through our Melbourne pest controller guide. Large trees close to old footings can also add to wall movement, so advice on the tree may help, as our Melbourne arborist hiring guide describes.

At handover, the plasterer should leave the surfaces ready for the next trade and tell you how long to wait before painting. Ask for the board type, the brand and the location of any fire-rated, wet area or acoustic board, so later repairs can match. Rondo makes steel stud framing, suspended ceiling systems and plastering beads, and its name may appear on quotes for new walls and bulkheads. James Hardie makes Hardie Groove Lining, a moisture resistant board for kitchens, laundries and bathrooms, excluding showers. Keep these details with the contract, the electrician's certificate and any asbestos clearance paperwork.

Item Who Provides It Why It Matters
Board types and brands used Plasterer Lets later repairs match
Location of fire-rated linings Plasterer or builder Protects the rating during future work
Certificate of Electrical Safety Electrician Proof new wiring was checked
Asbestos clearance paperwork Licensed removalist or assessor Shows the area was cleared
Paint and sealer details Plasterer or painter Helps touch-ups blend in
Invoice and payment receipts Plasterer Needed for any later claim
Approval letters Owners corporation or council Shows the work was authorised

Hidden Damage, Working Hours and Extra Visits

Plastering prices can change once the old surface comes off, because rotten timber, failed cornice adhesive or water damage are often hidden. Ask each plasterer to write rates into the quote for common extras, so any change is priced before the work goes ahead. Quote Yard figures put rubbish removal at about $200 to $700 and scaffold or access equipment at about $300 to $1,600 for ceiling work. Water damaged ceiling repairs range from about $650 to $2,800, which is why the leak itself must be fixed first. Removing old cornice adds about $8 to $20 per linear metre before any new cornice goes up. Agree that any variation, meaning a change to the agreed work or price, is signed by both of you before it starts.

Noise also needs planning in a city where many homes share walls or sit close together. EPA Victoria's residential noise rules prohibit electric power tools on weekdays before 7 am and after 8 pm, and on weekends and public holidays before 9 am and after 8 pm. The same rules say residential noise does not include noise from constructing or demolishing a residential building, which is dealt with separately. Check your council's local laws and any owners corporation rules for building work hours, and share them with the plasterer. The noise pages on the EPA Victoria website set out the details.

Possible Extra 2027 Estimate Wording to Ask For
Rubbish removal $200 - $700 Included or listed as a fixed sum
Scaffold or access equipment $300 - $1,600 Allowance with the equipment named
Water damaged ceiling section $650 - $2,800 Rate per area once the leak is fixed
Old cornice removal $8 - $20 per metre Rate per linear metre
Insulation replacement $20 - $50 per m² Rate per square metre
Asbestos testing $80 - $350 Who arranges it and who pays

Disputes Over Cracked Joints or Unfinished Plastering

Start by raising the problem with the plasterer in writing, with dated photos taken in side light that shows the joints clearly. Give the business a reasonable time to fix it, and keep copies of every message, quote and invoice in one place. For a plastering-only job, the Australian Consumer Law guarantees of due care and skill and fitness for purpose apply, and the ACCC explains them for consumers. Consumer Affairs Victoria can also give advice on how to take the matter further.

Where the plastering is domestic building work, the BPC offers dispute resolution at no cost, a service formerly known as Domestic Building Dispute Resolution Victoria. You must first try to resolve the dispute with the other party yourself before the BPC will accept it. Conciliation, a guided talk aimed at agreement, is run by dispute resolution officers, and if it fails the BPC may make binding orders, or issue a certificate allowing you to go further. The Victorian Civil and Administrative Tribunal (VCAT), which works like a less formal court, hears domestic building disputes once those earlier steps are done. Home Warranty claims for eligible contracts signed from 1 July 2026 also go through the BPC. Keep the contract, quote, invoices, photos and messages together, because each step will ask for them.

What to Look Out For Before a Melbourne Plasterer Starts

Many warning signs show up in the written quote, well before any plastering starts. Watch for quotes that list one lump sum for a whole house with no rooms, areas or board types named. Be wary of a plasterer offering to cut out old sheeting in a house built before 1990 without mentioning an asbestos test. A business that combines plastering with painting or carpentry on a renovation should give you a BPC registration number. Ask questions if a quote for an apartment says nothing about fire-rated walls, owners corporation approval or lift bookings.

Check what the quote says about the finished surface, because new plaster has to be sealed before it takes a finish coat. Taubmans makes a 3 in 1 primer undercoat sealer for interior and exterior surfaces. Dulux makes interior paints, including a ceiling white and a renovation range. Haymes makes interior paints for walls, ceilings and trims, and the business began in Ballarat in 1935. Wattyl makes interior paints for walls and ceilings, sold under names such as I.D Advanced. Whichever paint is chosen, the quote should say who applies the sealer, so the plasterer and painter do not each assume the other will.

Quote Problems Worth Querying

In the quote
What could go wrong
One lump sum, no rooms listed
You cannot check what is included
No asbestos test on a pre-1990 house
Cutting untested sheeting can spread fibres
No registration on combined work
Combined skills on a renovation need registration
Nothing about fire ratings in an apartment
Repairs may breach the fire protection

Cash-only offers with no written quote leave you little to rely on later.

Quotes that skip the level of finish make comparing prices much harder.

When one quote is far cheaper than the rest, check whether rubbish removal, access equipment, cornice or the sealer coat has been left out.

Getting Plastering Quotes That Line Up Across Melbourne

Quotes can only be compared fairly when every plasterer prices the same written description. List each room, the rough wall and ceiling areas, the type of surface and the damage, and attach clear photos. Mention the year the house was built, any heritage listing, and whether it is an apartment with an owners corporation. For anything beyond small patches, ask each plasterer to visit, because old plaster is hard to judge from photos.

Ask every quote to name the level of finish, the board type and brand, the cornice profile and whether a sealer coat is included. Request separate lines for labour, materials, cornice, access equipment, rubbish removal and any asbestos testing. If the work sits inside a renovation, ask how the plastering is staged and paid within the main contract. Payment for a small job should come after the work is finished and inspected in good light. For ceiling work in particular, our guide to ceiling repairs in Victoria lists the extra items worth asking about.

Before you sign, check any registration on the BPC register and confirm the plasterer's public liability insurance in writing. Agree start dates around drying time, because each coat of compound needs to dry before the next is applied. Ask how dust will be contained, especially in an occupied home with children, pets or people with breathing problems. Clear furniture from the room and cover what stays, as sanding dust spreads further than most people expect. Confirm who removes the rubbish and who cleans up at the end of each visit. Post the job on The Quote Yard to reach Melbourne plasterers who can all price the same written description.

Plasterers Across Melbourne

Prices on this page apply across metropolitan Melbourne, from inner city apartments to new estates on the fringe. Some plasterers add a travel charge for outer suburbs, so ask whether one applies to your address.

▶ Melbourne 32 areas
Melbourne CBD Carlton Fitzroy Richmond South Yarra Prahran St Kilda Brighton Bentleigh Caulfield Malvern Camberwell Hawthorn Box Hill Doncaster Ringwood Glen Waverley Clayton Dandenong Springvale Frankston Werribee Point Cook Footscray Sunshine Essendon Moonee Ponds Coburg Preston Reservoir Epping Craigieburn
▶ Geelong & Surf Coast 24 areas
Geelong Newtown Belmont Highton Waurn Ponds Grovedale Corio Lara Leopold Drysdale Clifton Springs Portarlington Queenscliff Point Lonsdale Ocean Grove Barwon Heads Torquay Jan Juc Anglesea Aireys Inlet Lorne Winchelsea Bannockburn Armstrong Creek
▶ Mornington Peninsula 26 areas
Mornington Mount Eliza Mount Martha Safety Beach Dromana McCrae Rosebud Rye Blairgowrie Sorrento Portsea Tootgarook Capel Sound Red Hill Main Ridge Arthurs Seat Balnarring Merricks Somers Flinders Shoreham Hastings Bittern Crib Point Somerville Tyabb
▶ Yarra Valley & Dandenongs 26 areas
Lilydale Mooroolbark Chirnside Park Coldstream Yarra Glen Healesville Badger Creek Launching Place Yarra Junction Warburton Wandin North Seville Silvan Monbulk Olinda Sassafras Kallista Belgrave Tecoma Upwey Ferntree Gully Upper Ferntree Gully Emerald Cockatoo Gembrook Macclesfield
▶ Ballarat, Bendigo & Goldfields 26 areas
Ballarat Wendouree Alfredton Delacombe Sebastopol Buninyong Creswick Clunes Daylesford Hepburn Springs Trentham Kyneton Castlemaine Maldon Harcourt Bendigo Kangaroo Flat Strathdale Eaglehawk Epsom Heathcote Maryborough Avoca Beaufort Talbot Dunolly

Melbourne Plasterer FAQ

Does a Melbourne plasterer need to be registered with the Building and Plumbing Commission?
Not for plastering alone, because Consumer Affairs Victoria lists plastering among the trades exempt when the work involves only that trade. Registration is needed when a business combines skills, such as plastering and painting, to complete a renovation or repair. It is also needed for any work that requires a building permit, regardless of value. Some plasterers hold the sheet plastering or solid plastering class anyway, and you can check this on the BPC register.
Can one business plaster and paint my renovation if it costs more than $10,000?
Yes, but that business should be registered with the BPC, because combining skills on one job brings in the registration rules. Domestic building work worth more than $10,000 also needs a major domestic building contract in the written form the law sets. The deposit is capped at 10 per cent under $20,000 and at 5 per cent from $20,000. Check the registration number on the BPC register before you sign or pay anything.
Do I need a planning permit to replace a ceiling in a Heritage Overlay house?
Usually not, because Clause 43.01, the planning rule for heritage areas, only requires a permit for inside changes where the schedule names internal alteration controls. Your council's schedule to the Heritage Overlay shows whether those controls apply to your address. Places on the Victorian Heritage Register are different, and interior works there generally need a permit from Heritage Victoria. Ask the council or Heritage Victoria before work starts if you are unsure.
What happens if a plasterer finds possible asbestos partway through a job?
Work on that material should stop until a sample has been tested by a qualified assessor. Removing non-friable asbestos without a licence is only allowed up to 10 square metres and one hour in any seven days. Larger areas, or any friable material, need a licensed removalist, and the waste must go to a site licensed by EPA Victoria. Expect the timetable and the price to change once a removalist is involved.
Who approves plastering work on a shared wall in a Melbourne apartment building?
The owners corporation does, if the wall or ceiling is common property or carries shared services. Consumer Affairs Victoria says a lot owner must not repair, alter or maintain common property without express authorisation. Your plan of subdivision shows where your lot ends and the common property begins. Get the approval in writing before the plasterer starts any work.
Can a downlight or power point be cut into a fire-rated apartment wall or ceiling?
Only with a method that keeps the fire rating intact, which usually means agreeing the detail with the building manager first. The BPC found that most passive fire defects in multi-owned buildings are likely to relate to improper penetrations in rated walls. Electrical work must be done by a licensed electrician, who issues a Certificate of Electrical Safety. The plasterer then makes good around the opening using matching board and sealant.
Do I have to fill picture hook holes when I move out of a Melbourne rental?
Renters can install picture hooks and screws on most surfaces without consent, except exposed brick or concrete and Heritage Register properties. At the end of the lease you must restore the property, allowing for fair wear, or pay the reasonable cost of restoring it. Restoration is not needed if the rental provider agrees, the agreement says so, or you paid a modification bond. The rental provider may require changes to be done by a suitably qualified person.
What level of plasterboard finish should a Melbourne quote name?
AS/NZS 2589 sets finish levels 3 to 5 for plasterboard, and homes are usually finished to Level 4. Level 5 adds a skim coat over the whole surface for a flatter result. It is recommended where gloss paint is used or where light hits the wall at a sharp angle, such as beside large windows. Naming the level on every quote makes the prices much easier to compare.
How large a deposit can a renovator ask for on a job that includes plastering?
Victorian law caps the deposit at 10 per cent for domestic building contracts under $20,000. For contracts of $20,000 or more, the cap drops to 5 per cent. After the deposit, you pay for completed stages and should not pay in advance. On a larger renovation, plastering is usually paid for as part of the fixing stage.
Where can I take a dispute about poor plastering work in Victoria?
Raise it with the business in writing first, with dated photos and a reasonable time to fix it. For domestic building work, the BPC runs a free dispute resolution service once you have tried to settle the issue yourself. If conciliation fails, the BPC can issue a certificate that lets you take the matter to VCAT. Consumer Affairs Victoria can advise on plastering-only jobs under the Australian Consumer Law.

Melbourne Plastering Specialists

For Trades & Contractors - VIC

Melbourne plastering jobs often need other trades for the parts a plasterer cannot legally do or does not usually offer. Power points and downlights need a licensed electrician, suspect sheeting needs a licensed asbestos removalist, and painting usually follows once the plaster is sealed. These trades can be booked alongside a plastering job anywhere across the metro area.

Compare Melbourne Plastering Quotes

Tell us your suburb, the rooms and surfaces involved, the age of the house and any heritage or owners corporation details, and compare quotes from experienced Melbourne plasterers who are all pricing the same job.

Get Free Plastering Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All Victorian tradies are required to hold appropriate licences. Verify at the Building and Plumbing Commission.
Prices are 2027 estimates based on Quote Yard plastering, cornice, ceiling and asbestos testing guides for Victoria. Your final price will depend on the surface, access and how much old material has to come out, so compare written quotes that list labour, board, cornice, access and rubbish separately.
Need work done? Get free quotes. Post a Job – It's Free