Looking for a Tiler in Melbourne?
Tell us your suburb, the rooms and surfaces to be tiled, rough measurements, and whether old tiles must come up first. Mention the year the home was built and whether it is a house or an apartment. We will send that description to experienced tilers around Melbourne, so every quote you receive prices the same job.
Melbourne Tiling Price Guide
These are estimated Melbourne price ranges for 2027. Your price depends on the tile size and pattern, the state of the walls and floor, access to the room, and whether a plumber, an electrician or an asbestos removalist is part of the job.
Hire a Tiler Melbourne VIC - Get Local Quotes
Tiling work in Melbourne ranges from regrouting an old shower in a postwar brick veneer house to laying porcelain through a new townhouse or repairing a patterned verandah on a Victorian terrace. Most tilers price labour by the square metre, at roughly $45 to $130 depending on the suburb, the tile size and how much preparation the room needs. In Victoria, a tiler who lays tiles and nothing else does not need building registration, even on a large job. If the same contract also covers the membrane, the waterproof layer under the tiles, and is worth more than $10,000, ask the Building and Plumbing Commission whether registration applies. Any job above $10,000 needs a major domestic building contract, the formal written contract set by state law, with the deposit capped at 10 or 5 per cent. Homes built or renovated before 1990 can hide asbestos in the wall linings behind old tiles, and new engineered stone splashbacks have been banned since July 2024. Apartment owners should also read the rules of their owners corporation, the group of all owners that runs the building, as these can limit noisy hard floors. Older inner suburban houses raise their own issues, from springy timber floors to original tessellated (small patterned tile) verandahs, while slabs in the north and west can crack as the clay beneath them moves. The prices on this page are 2027 estimates for normal working hours, drawn from our Victorian tiling price guides. Post your job on The Quote Yard and we will connect you with local Melbourne tilers.
At a Glance - Melbourne Tiling Prices 2027
| Job | Price Range | How It Is Charged | What Drives It In Melbourne | Who Can Do It |
|---|---|---|---|---|
| Floor tiling labour | $45 - $80 per m² | Per square metre | Slab flatness and tile size | Tiler |
| Wall tiling labour | $55 - $95 per m² | Per square metre | Wall condition and number of cuts | Tiler |
| Bathroom floor labour | $70 - $120 per m² | Per square metre | Small rooms with many cuts | Tiler |
| Bathroom wall labour | $75 - $140 per m² | Per square metre | Shower shelves, corners and edge trims | Tiler |
| Large format (600 mm+) or mosaic | $80 - $130 per m² | Per square metre | Flatness needed and setting time | Tiler |
| Wet area waterproofing | $45 - $75 per m² | Per square metre | Shower layout and membrane type | Tiler or waterproofer, ask the BPC about registration if combined over $10,000 |
| Membrane for a whole bathroom | $600 - $1,600 per room | Per room | Room size and shower design | Tiler or waterproofer |
| Screed (sand and cement layer) or levelling | $30 - $60 per m² | Per square metre | How far the floor is out of level | Tiler |
| Strip out old tiles | $30 - $70 per m² | Per square metre | Thick old cement beds and rubbish removal | Tiler or demolition crew |
| Small bathroom, fully tiled | $3,000 - $7,500 | Fixed price, labour | Tile choice and wall condition | Tiler or bathroom renovator |
| Regrout existing shower | $400 - $900 | Fixed price | Grout type and mould | Tiler |
| Kitchen splashback | $400 - $1,200 | Fixed price, supply and lay | Tile type and power point cuts | Tiler |
| Asbestos sample test | $40 - $80 per sample | Per sample | Number of materials tested | Licensed assessor or laboratory |
What Pushes a Melbourne Tiling Bill Up
Hiring a Tiler in Melbourne: First Questions to Settle
Most tiling quotes in Melbourne are written as a labour rate per square metre, with the tiles, adhesive, grout and membrane either supplied by the tiler or bought by you. Labour across the metro area runs from about $45 per square metre for plain floors in the west to $130 for detailed work in inner suburbs and apartments. The main kinds of tiling work, and how each one is charged around the state, are set out in our Victorian tiling services guide. Preparation, floor slopes towards the drain (falls) and finishing details for wet rooms are covered in bathroom tiling in Victoria, so they get only a brief mention here. Melbourne rules and local conditions matter most on this page, because they change who you hire, what the contract says and what the quote includes.
Before anyone visits, measure each floor and wall to be tiled and note whether old tiles, the boards behind them or vinyl flooring must come out first. Tell each tiler the year the home was built, because linings in homes built or renovated before 1990 may contain asbestos. Say whether the home is a freestanding house, a townhouse or an apartment with an owners corporation, the body of all owners that runs the shared parts of a building. Photos of the room, the stairs or lift and the street parking outside let a tiler judge access and rubbish removal before writing a price.
Square Metre Rates for Melbourne Tiling Work in 2027
Our Victorian tiling figures put plain floor tiling at about $45 to $80 per square metre for labour, and wall tiling at about $55 to $95. Large format tiles, usually 600 millimetres or more along one side, and mosaics cost about $80 to $130 per square metre because they need flatter surfaces and more time for the glue to set. Waterproofing a wet area adds roughly $45 to $75 per square metre, while a screed, a sand and cement layer that flattens or slopes a floor, adds $30 to $60. Bathroom floors and walls cost more, at about $70 to $120 and $75 to $140 per square metre, because a small room means more cuts, corners and edge trims. A small bathroom tiled from floor to ceiling costs about $3,000 to $7,500 in labour, before the tiles themselves are bought. Every figure on this page is a 2027 estimate for normal working hours, not a fixed price.
Tiles are usually a separate line, with ceramic at about $20 to $50 per square metre, porcelain at $35 to $90 and natural stone from $60 to $200 or more. Breaking out old tiles costs about $30 to $70 per square metre including rubbish removal, and a membrane across a whole bathroom about $600 to $1,600 per room. If the tiling is one part of a full refit, the wider budget is set out in bathroom renovation costs in Victoria. Location also changes the labour rate, and the table below shows how our figures differ between groups of Melbourne suburbs. Inner suburbs with older houses, tight parking and apartment towers cost the most, while large open floors in newer western estates cost less.
| Melbourne Area | Labour per m² | Typical Job | What Moves the Price |
|---|---|---|---|
| Inner and eastern suburbs | $60 - $130 per m² | Bathrooms in older houses | Uneven walls, parking and narrow access |
| Bayside and south east | $55 - $120 per m² | Bathrooms and living area floors | Room size and tile choice |
| Northern suburbs | $50 - $110 per m² | Floors in houses and townhouses | Slab condition and levelling |
| Western suburbs | $45 - $100 per m² | Open plan floors in estates | Floor area and slab cracks |
| CBD and apartments | $65 - $130 per m² | Apartment bathrooms and floors | Lift bookings and building rules |
When a Tiling Job Needs a Major Domestic Building Contract
Consumer Affairs Victoria says a major domestic building contract should be used for all building work worth more than $10,000, including renovations and repairs. That is a written contract that has to meet the Domestic Building Contracts Act 1995, the Victorian law that sets out what a home building contract must contain. A large floor tiling job, or a bathroom retile with a new membrane, can pass that figure once the value of the whole job is added up. Ask each tiler to say on the quote whether the total includes the tiles, because a price without them can make the contract look smaller than it is. The deposit limits and payment rules described further down this page all follow from that contract value.
Tiling also falls within a limited registration class, one covering a narrow type of work, for bathroom, kitchen and laundry renovations, which includes installing or repairing wall and floor tiling and splashbacks. That matters when a business offers to strip the room, book the other trades and hand back a finished bathroom, because it is then acting as a renovation builder. The Building and Plumbing Commission, often shortened to the BPC, is the Victorian regulator that registers builders, confirming they are qualified for the work, and licenses plumbers. A business running the whole renovation should hold the right builder registration, and you can compare its price with Melbourne bathroom renovators.
Small jobs fall well below the $10,000 figure, such as replacing a few cracked tiles, resealing a shower or regrouting a splashback. Those jobs still deserve a written quote that names the work, the products and the price, even though no major contract is required. Under the Australian Consumer Law, the national consumer protection law, any tiling service must be provided with due care and skill. The work must also be fit for any purpose you made clear before the job, such as tiling a floor that will be used by a wheelchair. Prices for those smaller fixes are listed in our guide to tile repairs and regrouting in Victoria. Keep the quote, the invoice and any messages about the job, because they show what was agreed if a problem appears later.
Does Your Tiling Job Need a Major Contract?
Value the job by the whole contract price, including any tiles the tiler supplies.
Ask for one written contract that covers every stage of work in the same room.
Tiling Alone, Tiling Plus Waterproofing and BPC Registration
Registration with the BPC is generally needed for building work worth more than $10,000, but Consumer Affairs Victoria lists exceptions for work involving only one trade. Wall and floor tiling is on that list, alongside painting, plastering and floor coverings, so a tiler who lays tiles and nothing else does not need registering. Waterproofing is treated differently, because it has its own limited class covering the application and repair of membranes in bathrooms, kitchens and laundries. The BPC also says registration in single trade classes such as tiling is needed when a business carries out two or more classes under one contract. If one business lays the membrane and the tiles under one contract worth more than $10,000, ask the BPC or check its register to see whether registration applies. The Building and Plumbing Commission keeps a public register, called the practitioner search, where a business name, registration number and class of work can be checked.
Make sure the name and registration number on the register match the business name on your quote and contract. Consumer Affairs Victoria warns that if a builder is not properly registered, you cannot get Home Warranty insurance, the state-run cover for lost deposits and unfinished or faulty work, for the job. Some owners split the job, hiring a specialist through Melbourne waterproofing services and a tiler separately. That keeps each contract simpler, but it also means two businesses can blame each other if the shower later leaks. If you split the work, ask the waterproofer how the membrane will be handed over to the tiler, and read our page on bathroom waterproofing first.
| Part of the Job | Who Does It | Licence or Registration Needed | Document You Should Receive |
|---|---|---|---|
| Tiling only, any value | Tiler | No BPC registration for tiling alone | Written quote, major contract over $10,000 |
| Membrane and tiles over $10,000 | Tiler or waterproofer | Ask the BPC whether registration applies | Major domestic building contract |
| Whole bathroom refit over $10,000 | Registered builder | BPC limited or unlimited builder class | Major contract, plus Home Warranty over $20,000 |
| Moving taps, drains or the shower waste | Plumber | Plumbing licence or registration with the BPC | Plumbing compliance certificate from $750 |
| Heated floors and new power points | Electrician | Electrical licence from Energy Safe Victoria | Certificate of Electrical Safety on completion |
| Removing asbestos linings | Licensed asbestos removalist | WorkSafe Victoria asbestos licence | Clearance and waste disposal records |
Paying a Tiler in Stages Within Victoria's Deposit Limits
By law, the deposit on a domestic building contract is capped at 10 per cent below $20,000, and at 5 per cent once the contract reaches $20,000. On a $15,000 bathroom tiling contract, for example, the deposit can be no more than $1,500. After that, payments should follow completed stages, such as the strip out, the membrane and the finished tiling, rather than dates on a calendar. Consumer Affairs Victoria also advises owners not to pay in advance for work that has not been done. Before each stage payment, check that the work in that stage is complete and matches what the contract describes.
The Home Warranty scheme started on 1 July 2026 for eligible domestic building contracts over $20,000, on buildings of three storeys or less. It is run by the BPC and can cover lost deposits, incomplete work and defective or non-compliant building work. The Consumer Affairs Victoria website explains the payment rules and what must be included in a major contract. Because a tiling-only job does not need a registered builder or tradesperson, ask in writing before you sign whether your contract will be covered by the scheme.
Variations, the formal word for changes to the agreed work, must be agreed in writing between you and the business. Under the state rules, a formal notice can be skipped only when the business reasonably expects a change to raise the original price by 2 per cent or less. Tile choices made after signing often lead to variations, so ask whether the contract uses an allowance, a set sum for tiles not yet chosen. If your final tiles cost more than the allowance, the difference is added to the contract price, along with any extra labour they need. A clear allowance written as a dollar figure per square metre is far easier to check than a vague phrase such as standard tiles. Keep the signed variation with the contract, because it becomes part of the agreed price.
Contract Value and the Payment Rules
Pay each stage only after you have seen the finished work in that stage.
Keep every invoice and bank receipt together until any defects have been fixed.
Membrane Defects the Building and Plumbing Commission Warns About
In a house, wet area waterproofing has to meet the National Construction Code, the national set of building rules, through its Housing Provisions, the part written for houses, or AS 3740. AS 3740 is the Australian Standard for waterproofing domestic wet areas, and the membrane products themselves also need to meet AS/NZS 4858, the Standard for wet area membrane materials. The Australian Building Codes Board publishes the code, and the BPC adds guidance on how membranes fail in Victorian homes. Tiles and grout are not waterproof on their own, so the membrane underneath is what keeps water out of the walls and floor. That is why the membrane deserves as much attention in a quote as the tile you can see.
The BPC lists pinholing, tiny holes that form when a single thick coat traps air, as a common defect. It also warns about poor adhesion, where the membrane does not stick, when the surface is dusty, uneven or still wet, and about cracking where mismatched materials move at different rates. Failures at the membrane's edges, called terminations, are another problem, where it is not stuck to the waterstops or flashings (edge strips) around the wet area. A waterstop is a strip, often an aluminium angle, fixed at a shower edge or doorway to stop water travelling under the tiles into dry areas. A bond breaker is a flexible strip or sealant placed at corners and joints so the membrane can stretch rather than tear. Ask the tiler or waterproofer how they handle each of these points before any tiles go down.
Ardex makes undertile waterproofing membranes, cement and epoxy grouts, and levelling compounds for floors. Laticrete makes the Hydro Ban membrane and SpectraLock Pro epoxy grout, both used in Australian showers and wet rooms. Crommelin makes waterproofing membranes for wet areas, showers and balconies, alongside sealers for concrete and stone. Sika makes tile adhesives, tile grouts and tile and stone waterproofing products for homes and larger buildings. Mapei makes tiling adhesives, waterproofing products and tile levelling systems for floors and walls. Ask for the product name of the membrane on the quote, and check the maker's data sheet for the number of coats and drying time.
| Membrane Defect | What Causes It | What to Ask the Tiler |
|---|---|---|
| Pinholes | One thick coat that traps air | How many coats and the drying time between them |
| Poor adhesion | Dusty, uneven or damp surface | How the surface is cleaned and primed |
| Cracking at joins | Materials moving at different rates | Which products are used together |
| Water reaching dry areas | Membrane not bonded to waterstops or flashings | Where the membrane stops at the doorway |
| Splits at corners | No bond breaker where walls and floor meet | How corners and movement joints are treated |
Hard Floors, Noise and Apartment Rules in Melbourne
Apartments and many townhouses in Melbourne sit inside an owners corporation, which can make rules about how lots, the individual units, are used and changed. Consumer Affairs Victoria says those rules can include restrictions on floor coverings in lots to reduce disturbance by noise. So replacing carpet or timber with tiles in an upstairs apartment may be limited, or allowed only with a sound reducing layer under the tiles. If an owners corporation has not made its own rules, a standard set of default rules, called the model rules, in the Owners Corporations Regulations 2018 applies instead. Registered rules are lodged with Land Use Victoria and apply to owners, tenants and other occupiers, who must be given a copy before they move in. Ask the manager or committee for the current rules before anyone quotes, because they may change what you can lay.
Owners corporation rules can also cover moving furniture and other objects through common property, the shared areas of the building, where it affects other residents. Pallets of tiles, bags of adhesive and bins of rubble all have to travel through lobbies, lifts and car parks, so ask about bookings and protective covers. If furniture has to come out of the unit before the floor goes down, Melbourne removalists can work within the same lift booking. Balconies need extra care, because water getting through a failed membrane often ends up in the apartment below, and the work involved is set out in balcony tiling in Victoria. Rules can also govern renovations that change the outside look of a lot, which can include balcony tiles seen from the street.
Consumer Affairs Victoria also refers to quiet hours between 10 pm and 9 am in its guidance on owners corporation noise rules. Your own building may set tighter working hours for trades, so check them before agreeing a start date with the tiler. Get any approval from the owners corporation in writing before you order tiles or pay a deposit. A tiler who has worked in your building before may already know its loading dock times and lift rules.
Before Tiling in an Apartment
Keep a copy of the rules and any approval with your contract papers.
Tell neighbours below and beside you when the noisiest days are planned.
Asbestos Behind Old Shower Walls and Under Vinyl
Victoria's asbestos guidance says homes built or renovated before 1990 are likely to contain asbestos somewhere in the building. It lists wall linings behind and beneath tiles in bathrooms, kitchens and laundries, and bath and shower surrounds, as common places to find it. Vinyl floor tiles and the backing on old sheet flooring are also listed, which matters when a tiler plans to grind or scrape an old floor. Looking at a sheet is not a reliable test, so samples need to go to a laboratory before demolition starts. Our asbestos testing and inspection figures put a single sample test at about $40 to $80 and a home inspection with a report at $300 to $700.
Victoria's asbestos website advises using a licensed asbestos removalist and notes that builders, electricians and plumbers are generally not licensed to remove it. Limited removal without a licence is allowed only for non-friable material, the bonded kind that does not crumble by hand, up to 10 square metres in total. A shower recess lined with old fibre cement sheeting may fall under that limit, but a whole bathroom or laundry can easily go over it. WorkSafe Victoria licenses asbestos removalists, and its rules apply to anyone doing the work for you. Typical bills for a licensed removal appear in our asbestos removal prices for Melbourne guide. Ask every tiler how they will deal with linings that might contain asbestos before you accept a quote for a pre-1990 bathroom.
Asbestos Checks Before the Strip-Out
Put the test result with the quote so every tiler prices the same strip-out.
A licensed removal adds days to the job, so allow for it in the timeline.
Engineered Stone Splashbacks and Silica in Porcelain Tiles
From 1 July 2024, WorkSafe Victoria banned the manufacture, supply, processing and installation of engineered stone benchtops, panels and slabs. Engineered stone is an artificial product containing 1 per cent or more crystalline silica, a mineral whose fine dust harms the lungs, made by combining stone with resins, water or pigments. A new engineered stone splashback therefore cannot be fitted in a Melbourne kitchen, and our kitchen splashback installation guide covers the alternatives. Benchtops and splashbacks installed before the ban may still be removed, repaired or modified, with water to keep dust down, dust extraction and breathing protection. Ceramic tiles are not covered by the ban, and neither are porcelain and sintered stone, a dense slab made by fusing minerals under heat, when they contain no resin. If your signed contract includes a banned product, Consumer Affairs Victoria suggests agreeing a variation for a different material.
Ordinary tiles still contain crystalline silica, with WorkSafe Victoria listing about 5 to 45 per cent in ceramic tiles and 14 to 18 per cent in porcelain. Cutting, grinding and drilling them can release fine dust that damages the lungs, and work likely to create high levels needs a hazard control statement, a written dust control plan, first. WorkSafe expects water on the blade or a Class M or H vacuum, built to trap fine hazardous dust, plus a close-fitting P2 mask, rated for fine dust, as backup. Festool makes M class dust extractors for collecting fine dust from cutting and sanding on site. Bosch makes angle grinders, demolition hammers and dust extraction systems used on renovation sites. Ask where the cutting will happen, and expect wet cutting or extraction rather than dry sweeping or compressed air during clean-up.
| Material | Crystalline Silica Content | Control to Expect |
|---|---|---|
| Ceramic tiles | 5 to 45 per cent | Wet cutting or a dust extractor on the tool |
| Porcelain tiles | 14 to 18 per cent | Wet saw or extraction to a Class M or H vacuum |
| Concrete slab | Less than 30 per cent | Extraction when grinding or cutting grooves |
| New engineered stone | Banned for installation since 1 July 2024 | Choose another material |
| Existing engineered stone benchtop | Removal and repair allowed with controls | Water, extraction and fitted masks |
Breaking Out Old Tiles Without a Noise Complaint
EPA Victoria's residential noise rules name electric power tools, and air-powered or impact tools such as hammers and grinders. Those tools may not be used at a home on weekdays before 7 am or after 8 pm. On weekends and public holidays, the limit is before 9 am or after 8 pm. Councils, not the EPA, handle residential noise complaints, and they can treat noise as unreasonable even inside the allowed hours if it is excessive. Demolishing or building a home is treated separately from residential noise, so check the EPA Victoria website and your council if the tiling is part of a larger build.
Breaking out old tiles with a demolition hammer is usually the loudest part of the job, and on a large floor it can run for a full day or more. Plan those days for weekday working hours, and let neighbours know in advance, especially in semi-detached houses and terraces with shared walls. Even a light demolition hammer on the old cement layer under tiles is loud through a shared wall. In apartments, the owners corporation rules may set narrower hours than the state rules, and those stricter hours apply.
When Noisy Tools Can Run at Home
Put the noisy days in writing in the job schedule.
Ask whether the strip-out can be done in one block rather than spread over a week.
Tessellated Verandahs on Victorian and Edwardian Houses
Parts of inner Melbourne are covered by a Heritage Overlay, a planning control that protects the look of buildings and streets with heritage value. Many Victorian and Edwardian houses in those streets have tessellated verandahs, floors made of small geometric tiles laid in a pattern. You can see whether an overlay applies by getting a planning property report through Planning Victoria. Stonnington Council's heritage guidance says internal alterations generally do not need a planning permit, and neither do repairs that leave the appearance unchanged. Altering the outside of a building or demolishing part of it can need a permit, so a new verandah floor in a different tile is worth raising with your council first.
Repairing a cracked tessellated floor usually means lifting damaged pieces, relaying them on a solid base and matching missing tiles in colour and shape. That work is slow and is usually priced job by job, because every verandah has a different pattern and a different level of damage. If the concrete or brick base under the tiles has failed, the base may need rebuilding first, and Melbourne concreters can price a new slab. Keep any loose original tiles in a box, since they can be reused to patch the floor. Ask the tiler for photos of similar restorations they have finished before you choose who does the work.
| Work on a Heritage Property | Permit Generally Needed? | Who to Ask |
|---|---|---|
| New bathroom or kitchen tiles inside | Generally no, internal alterations | Council planning staff if unsure |
| Like for like verandah repair | Generally no, if the look is unchanged | Council heritage or planning staff |
| New outdoor tiles of a different pattern | May be needed, alters the exterior | Council before ordering tiles |
| Removing an original tiled verandah | May be needed, part demolition | Council planning department |
Working Around the Plumber, Electrician and Heated Floor
Most bathroom retiles need a plumber to disconnect and refit taps, the shower drain outlet and sometimes the toilet. Plumbers in Victoria are licensed or registered with the BPC and carry an identification card you can ask to see. For plumbing work worth $750 or more, the plumber must give you a compliance certificate confirming the work meets the law. Electricians are licensed by Energy Safe Victoria, and they must give you a Certificate of Electrical Safety whenever they finish electrical installation work. You can price those trades separately through Melbourne plumbers and Melbourne electricians. Ask the tiler who books them, and make sure the timing suits the membrane and tiling stages.
Heated floors bring an electrician into the middle of the tiling job, because the mat is laid before the adhesive and connected later. Warmup makes undertile heating mats that sit directly beneath stone or porcelain tiles, along with thermostats to control them. Running costs and installation options are covered in our page on underfloor heating installation. Stormtech makes long, narrow shower drains with tile insert grates, so the drain cover can carry the same tile as the floor. Selleys makes a Wet Area silicone sealant for the corners and joints in a shower that need to flex. Whichever products are used, the plumber, electrician and tiler should agree on drain positions and floor heights before the screed is laid.
If you are adding heating or cooling at the same time, Melbourne air conditioning installers can plan pipe runs before walls are closed. Damaged walls and ceilings near the bathroom can go to Melbourne plasterers once the tiler has finished. Agree a written order of work so no trade has to cut into finished tiles. Collect every certificate before you make the final payment to that trade.
Certificates to Collect Before Final Payment
Store the certificates with your property records for a future sale.
Ask the tiler for the product names, colours and batch numbers of the tiles and grout.
Slab Cracks in the North and West and What They Do to Tiles
Basaltic clay, a heavy soil formed from old volcanic rock, lies under much of the northern and western suburbs, and it shrinks as it dries and swells when wet. Engineering studies of these clays note that the seasonal movement can damage light structures and cause cracks in the ground itself. A concrete slab on that soil can develop fine cracks over time, and rigid tiles laid tightly over a crack will often crack along the same line. Ask the tiler to inspect the slab once the old floor is up, and to point out any crack that runs through it. A tiler can lay tiles over a stable hairline crack using a suitable membrane, but a crack that keeps widening needs an engineer's opinion first.
Movement joints, flexible gaps filled with sealant instead of grout, are explained in our bathroom tiling guide, and they matter more on clay that moves with moisture. Older houses in the inner and eastern suburbs often have timber floors instead, which need a firm sheet base before tiles go down. James Hardie makes Villaboard fibre cement lining, which the maker describes as ideal for use under tiles. CSR makes Gyprock Aquachek plasterboard, and its installation guide should be checked before tiles are fixed over it. Springy floorboards may point to problems in the framing under the floor, and subfloor repairs in Victoria can be needed before any tiling. Where a large tree grows close to the house, Melbourne arborists can advise on its roots and its effect on the ground.
If your home is new, ask the builder for copies of the soil report and slab design, and give them to the tiler before work is planned. Large format tiles leave less room for a slab that bends or cracks, because each tile spans more of the floor. Outdoor tiling on a freshly poured slab should wait until the concrete has properly hardened (cured), so ask whoever poured it for the date and their advice. Floors that are badly out of level can be corrected first, with the options set out in floor levelling and screeding. A tiler who asks about the slab before quoting is thinking about how the floor will behave in ten years, not just how it looks on handover day.
| What You Notice | Likely Cause to Check | Who to Ask |
|---|---|---|
| Hairline crack across several tiles | Crack in the slab beneath | Tiler first, engineer if it widens |
| Cracks along a doorway | No movement joint at the threshold | Tiler |
| Bouncy floor in an older house | Timber subfloor movement | Carpenter or subfloor specialist |
| Gaps opening at skirtings | Seasonal ground movement | Engineer if the gap keeps growing |
| Hollow sound under foot | Poor adhesive coverage | Tiler, re-bedding at $120 - $250 per m² |
Rotten Framing and Other Surprises Behind Old Tiles
Old bathrooms often hide problems that only show once the tiles come off, such as rotten wall board, a failed membrane or walls far from straight up and down. Ask each tiler to write rates for the likely extras into the quote, so you know in advance what each surprise would cost. Our figures put wall levelling, or re-sheeting with new board, at about $40 to $110 per square metre and a screed to falls, which slopes the floor towards the drain, at $50 to $95. Self-levelling compound for a floor that will take large tiles costs about $25 to $55 per square metre. Any extra work should be agreed in a written variation before it starts, with the new price and any change to the finish date.
Water that has leaked behind a shower for years can rot the timber wall frame and the timber beams (joists) under the floor. Damaged framing needs a carpenter, and Melbourne carpenters can quote on the repair once the walls are open. If the damaged timber shows tunnels or mud trails, ask a Melbourne pest controller to check for termites before it is closed up again. A leak investigation before demolition costs about $200 to $500 and can show how far the damage spreads. Keep some spare money in your own budget, because older rooms rarely come apart exactly as expected. A tiler who explains these risks at the quoting stage is usually easier to work with than one who promises a fixed price for everything.
| Problem Found | Our 2027 Estimate | How the Quote Should Handle It |
|---|---|---|
| Wall levelling or re-sheeting | $40 - $110 per m² | Rate per square metre |
| Screed to falls | $50 - $95 per m² | Rate per square metre |
| Self-levelling compound | $25 - $55 per m² | Rate per square metre |
| Removing thick stone or mortar beds | $40 - $70 per m² | Rate per square metre |
| Shower leak investigation | $200 - $500 | Fixed fee before demolition |
| Asbestos sample test | $40 - $80 per sample | Allowance per sample |
| Rotten framing behind the shower | Priced on quote | Hourly carpentry rate written in |
Taking a Tiling Dispute Further in Victoria
Most tiling problems are settled by a clear written request to the business, sent with dated photos and a list of the faults you want fixed. Allow a fair time for a reply, and keep every quote, invoice, variation and message in one folder. Where the job was domestic building work, the BPC runs a free dispute resolution service that was once known as Domestic Building Dispute Resolution Victoria. If that attempt to help both sides agree fails, the BPC can make orders the business must follow or issue a certificate that allows the matter to move on to a tribunal. That tribunal is the Victorian Civil and Administrative Tribunal, which hears building disputes that the parties cannot settle themselves.
Smaller jobs such as regrouting or a handful of replacement tiles are covered by the consumer guarantees in the Australian Consumer Law. Consumer Affairs Victoria explains those guarantees and can sometimes help both sides reach an agreement. If the fault is a dripping or mouldy shower, our page on shower regrouting and leak repairs shows what a typical fix involves. Hollow sounding tiles, uneven tile edges (lippage) and cracked grout are easier to prove with photos taken soon after the tiler left, so stick to facts and dates in every message.
What to Look Out For in a Tiler's Written Price
Some problems show up in the quote before any tiles are laid. A quote that names no membrane product, no adhesive and no grout gives you nothing to check when the job is finished. A combined membrane and tiling contract over $10,000 with no registration number is another sign to stop and ask questions. Watch for deposits above the legal limit, and for payment plans that run ahead of the work actually done. In a pre-1990 home, a quote that says nothing about asbestos may mean the tiler has not thought about it.
Look closely at what is excluded as well as what is included, such as rubbish removal, levelling, trims and silicone. A low price that leaves out the strip-out or the membrane can end up costing more than a higher quote that includes everything. Ask whether the price assumes you supply the tiles, and who carries the cost if your tiles arrive damaged or short. In apartments, check that the quote allows for lift bookings and the owners corporation's working hours.
Warning Signs in a Tiling Quote
A tiler who will not put the price in writing should not be trusted with a bathroom.
Quotes that say tiles laid to standard without naming a standard are too vague to rely on.
Getting Tiling Quotes in Melbourne That Price the Same Room
Quotes can only be compared fairly when every tiler works from one written description of the job. List each room with its floor and wall areas, the tile size and type, who supplies the tiles, and whether the old tiles must come up. Add the age of the home, any asbestos test result, the owners corporation rules if you have them, and photos of the access. Send the same pack to three tilers and ask each to break the price into strip-out, preparation, membrane, tiling and rubbish removal. Find out the date each price expires and the earliest start each tiler can offer, because good tilers are often booked weeks ahead. For bathrooms, you can test the figures against our Victorian bathroom tiling prices before you choose.
Ask each tiler how many coats of membrane they apply, how long it dries before tiling, and whether you can see it before it is covered. Ask what spare tiles they will leave, because a box from the same batch makes later repairs far easier to match. Check whether trims, movement joints and silicone are included, and whether the price assumes a flat floor. For a combined membrane and tiling job, ask whether BPC registration applies and check any registration number on the register before you sign. Confirm who books the plumber and electrician, and who collects their certificates at the end.
Before signing, read the whole contract, including the payment stages and the variation process. Make sure the start date, finish date and working hours are written down. Keep a copy of the contract, the quote and every variation in one place. With clear written terms, judging the finished floor and walls against the agreed price becomes a simple check.
Tilers Across Melbourne
Tiling prices on this page apply across Melbourne. Labour rates are usually highest in the inner suburbs and apartment buildings, while outer suburbs and fringe areas sometimes carry a travel charge.
▶ Melbourne 32 areas
▶ Geelong & Surf Coast 24 areas
▶ Mornington Peninsula 26 areas
▶ Yarra Valley & Dandenongs 26 areas
▶ Ballarat, Bendigo & Goldfields 26 areas
Melbourne Tiler FAQ
Can a tiler who is not registered take on a job worth more than $10,000?
Is a 30 per cent deposit for a bathroom retile legal in Victoria?
Can my owners corporation stop me replacing carpet with tiles?
Who checks for asbestos before old bathroom tiles are removed?
Can I still get an engineered stone splashback installed in Melbourne?
Can old tiles be broken out on a Sunday morning?
Can I swap an original tessellated verandah for new tiles?
Which certificates should I collect when a plumber and electrician work alongside the tiler?
Why do floor tiles crack in houses in Melbourne's north and west?
Where do I go if a tiler will not fix a leaking shower?
Melbourne Tiling Specialists
Related Services
For Trades & Contractors - VIC
Melbourne tiling jobs often need other trades for the parts a tiler cannot legally do. Taps, wastes and drains need a licensed plumber, heated floors and new power points need an electrician, and damaged framing may go to a carpenter. These trades can be booked alongside a tiling job anywhere across the metro area.
Compare Melbourne Tiling Quotes
Tell us your suburb, the rooms and surfaces to be tiled, the age of the home and whether old tiles must come up, and compare quotes from experienced Melbourne tilers who are all pricing the same job.
Get Free Tiling QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across Victoria? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.