Looking for a Roofer in Adelaide?
Tell us your suburb, the roof material, the age of the house, where water shows inside and whether there are solar panels, skylights or a rainwater tank. We will pass that description to local roofers across the metropolitan area, so every quote you receive is based on the same details.
Adelaide Roofing Price Guide
These are estimated Adelaide price ranges for 2027. Your price depends on the roof material, pitch, height and access, and on what is found once the roof is opened. Asbestos removal, scaffold and heritage approvals add to the total.
Hire a Roofer Adelaide SA - Get Local Quotes
Adelaide roofs span many eras, from Willunga slate on old churches and galvanised iron on inner suburb villas to postwar concrete tiles and newer steel roofs, so the right repair varies by street. Box gutters, flat gutters set inside the roof where old and new roofs meet, often cause ceiling leaks after heavy rain and need overflow outlets for spare water. Houses built before the mid-1980s may still have asbestos cement sheeting on the roof, eaves or a back verandah, which changes who can remove it and how. Some factory-made roof frames, called trusses, built between 1970 and 1997 have faulty nail-plates joining the timbers, and that matters when a heavy tile roof is repaired or replaced. Roofing is building work under South Australian law, so the business you hire needs a building work contractor licence from Consumer and Business Services, with conditions that cover roofing. Since 1 July 2026, roof work with a risk of a fall of more than two metres is classed as high risk construction work, so a safety plan and fall protection go into the price. Listed heritage places in the City of Adelaide need council development approval for outside changes, including a re-roof. The prices on this page are 2027 estimates for normal working hours across metropolitan Adelaide, before approvals, asbestos disposal or scaffold hire, and they assume reasonable access to the roof. Post your roofing job on The Quote Yard and we will connect you with local roofers across Adelaide who can quote on it.
At a Glance - Adelaide Roofing Prices 2027
| Job | Price Range | How It Is Charged | What Drives It In Adelaide | Who Can Do It |
|---|---|---|---|---|
| Roof inspection | $200 - $400 | Per visit | Roof height and access | Licensed roofer |
| Minor roof repairs | $250 - $600 | Per job | Tiles, flashings and access | Licensed roofer |
| Valley iron replacement | $400 - $1,200 | Per valley | Length and tiles lifted | Licensed roofer |
| Concrete tile restoration | $3,500 - $8,000 | Fixed after inspection | Repairs and coating system | Licensed roofer |
| Terracotta clean and repoint | $4,000 - $9,500 | Fixed after inspection | Broken tiles and ridge length | Licensed roof tiler |
| Metal roof clean and recoat | $4,000 - $10,000 | Fixed after inspection | Rust treatment and coats | Licensed roofer |
| Colorbond re-roof | $80 - $120 per m² | Per square metre | Pitch, profile and removal | Licensed roofer |
| Tile to Colorbond conversion | $15,000 - $35,000 | Fixed price | House size and frame checks | Licensed roofer |
| Colorbond gutters | $40 - $70 per lm | Per lineal metre | Profile and downpipes | Roofer or plumbing contractor |
| Box gutter replacement | $280 - $650 per m | Per metre | Sumps and overflows | Roofer or plumbing contractor |
| Asbestos roof removal | $35 - $60 per m² | Per square metre, plus disposal | Area, height and access | Licensed asbestos removalist |
| Storm make-safe, business hours | $450 - $650 | Per call-out | Tarping and time of day | Roofer |
| Whirlybird roof vent installed | $150 - $350 each | Per unit | Roof material and pitch | Roofer |
What Pushes an Adelaide Roofing Bill Up
Before You Ring an Adelaide Roofer
Roofers across metropolitan Adelaide quote most jobs as a fixed price after an inspection, and our 2027 estimates put a basic roof inspection at $200 to $400. Small repairs, such as a few cracked tiles or a lifted flashing, the metal strip that seals a joint, start at about $250 to $600. A full re-roof, which replaces the whole roof covering, costs far more, with a new Colorbond steel roof on an average house at about $12,000 to $30,000. The main kinds of roof work and their state-wide prices are outlined on our page about roofing services across South Australia. Hiring in Adelaide also brings local licence, heritage, asbestos, safety and storm rules, and they affect what a roofer can do and charge. Prices for the same roof can still differ widely, because each roofer allows differently for access, waste and the repairs they expect to find once tiles or sheets are lifted.
A short written description of the job makes the first inspection far more useful for both you and the roofer. Note the age of the house, the roof material, where water shows inside after rain and any work done on the roof before. Mention solar panels, a rainwater tank, a verandah fixed to the house or a box gutter, a flat gutter set inside the roof, since each one changes the method and the price. Sending every roofer the same notes and the same photos makes their quotes much easier to compare.
Adelaide Roof Repair and Re-Roof Prices, Item by Item
Repairs are usually priced per item, and our 2027 estimates put a single tile replacement at $25 to $80 and ridge cap rebedding at $45 to $75 per metre. Ridge capping is the row of curved tiles along the top of a tiled roof, and rebedding means lifting those tiles and setting them in fresh mortar. Replacing a valley, the metal channel where two roof slopes meet, costs roughly $350 to $800, while flashing repairs run at $200 to $600. Finding the source of a leak is often a separate charge of about $150 to $350 before any repair is quoted. Restoring a concrete tile roof, meaning cleaning, repairing, rebedding and coating it rather than replacing it, costs about $3,500 to $8,000 for a typical house. Terracotta roofs cost more to clean and repoint, meaning renew the flexible seal that holds the ridge capping in place, at roughly $4,000 to $9,500.
Re-roofing in Colorbond, a pre-painted steel sheet, comes to about $80 to $120 per square metre by our estimate, with tile to steel conversions on an average house at $15,000 to $35,000. That conversion usually includes stripping the tiles, checking the battens, the timber or steel strips the roof is fixed to, and fitting sarking or an insulating roof blanket before the new sheets go on. Sarking is a reflective membrane laid under the roof covering to stop dust and wind-blown rain reaching the ceiling space. BlueScope makes Colorbond steel, and its own case study shows Colorbond Ultra steel on a home within metres of the sea. Sheet shapes, called profiles, and colours are compared in our Colorbond roofing guide for SA, while asbestos removal, scaffold, heritage materials and frame repairs are not included in these figures and are priced separately.
| Job | Adelaide Range | How It Is Charged | What Moves It |
|---|---|---|---|
| Leak investigation | $150 - $350 | Per visit | Roof height and access |
| Single tile replaced | $25 - $80 each | Per tile | Matching an older tile |
| Ridge cap rebedding | $45 - $75 per m | Per lineal metre | Length of ridges and hips |
| Valley replacement | $350 - $800 | Per valley | Length and tiles lifted |
| Flashing repairs | $200 - $600 | Per job | Material and location |
| High pressure clean of a tile roof | $600 - $1,800 | Per roof | Roof size and pitch |
| Rebed and repoint ridges only | $1,800 - $4,500 | Per roof | Number of ridges and hips |
| Concrete tile restoration | $3,500 - $8,000 | Per roof | Repairs found on the day |
| Metal roof clean and recoat | $4,000 - $10,000 | Per roof | Rust treatment and coats |
| Colorbond re-roof | $80 - $120 per m² | Per square metre | Profile, pitch and removal |
| Colorbond gutters | $40 - $70 per lm | Per lineal metre | Profile and number of downpipes |
| Colorbond fascia cover | $30 - $55 per m | Per lineal metre | Condition of the timber behind |
| Whirlybird roof vent installed | $150 - $350 each | Per unit | Tile or sheet roof and pitch |
Patch, Restore or Replace: Matching the Fix to the Roof
The right fix depends on the material, its age and how much of the roof is failing. Cracked tiles, loose ridge capping or a rusted valley on an otherwise sound roof can usually be repaired for a few hundred dollars. When the pointing, the seal holding the ridge capping, has cracked on most ridges and the tiles are porous, soaking up water, a full restoration may be better value, as our roof restoration guide explains. Steel roofs with rust through the sheets, loose fixings or several past patches often reach the point where replacement costs less over time. Older galvanised iron on Adelaide villas may also hide failed sarking, rotted battens or old lead flashings that only show once sheets are lifted. Ask each roofer to say which option they recommend and why, with dated photos taken on the roof showing the worst areas.
Leak jobs are sometimes quoted as an hourly rate plus materials, which suits a problem nobody can see until the roof is opened. A quote for a larger job should be split into stages such as stripping, frame repairs, sarking, new sheets or tiles, gutters and waste removal. For one-off faults such as a cracked tile or a blocked valley, our page on roof repairs in SA covers the common causes. Repainting eaves, fascias and barge boards, the boards behind the gutters and along a sloping roof edge, is usually separate work that an Adelaide painter can price alongside the roofer's quote.
How Adelaide Roofers Price a Job
Which Licence a Roofer Needs in South Australia
Roofing counts as building work in South Australia, so a business that carries it out or organises it needs a building work contractor licence from Consumer and Business Services (CBS). Every licence carries conditions that set out the kinds of work the holder can contract for, so check that roofing sits within them. All building work must also be overseen by a registered building work supervisor, a person registered with CBS as qualified to oversee it, who may be the licence holder or a person the business nominates. Employees of a licensed business do not need a licence of their own. You can check the public register on the Consumer and Business Services website and match the licence number to the name on the quote. CBS also answers licensing questions by phone on 131 882.
New Building Work Contractors Regulations took effect on 1 September 2026, and they keep a small exception for plumbers. A licensed plumbing contractor can do minor roof plumbing without a building licence, meaning flashings, guttering, downpipes and roof coverings where the work costs less than $3,000. Staged work is added together, so a job cannot be split into small invoices to get around the limit, and tiling or roof frame work needs a building work contractor licence. Structural changes such as a new roof frame or a raised ceiling are often run by a builder, and the steps are covered in our guide to hiring a builder in Adelaide. If a quote comes from a plumbing business for anything more than gutters and flashings, ask to see its building work contractor licence as well.
Which Roof Work Needs Which Licence
Re-Roof Contracts, Deposits and Building Indemnity Insurance
Contracts for building work on a home worth more than $20,000 must be in writing, set out all of the terms and be signed by both you and the roofer. That threshold rose from $12,000 on 10 November 2025, so older advice quoting the lower figure is out of date. You should receive a signed copy along with Form 1, the official notice set by law that explains your rights and obligations under the contract. A contract over $20,000 also gives you five full business days after signing to change your mind and end it. The deposit is capped at $1,000 on work worth up to $20,000 and at 5 per cent of the price on larger jobs. Repair jobs under $20,000 need no written contract by law, but a written scope and price still protect both sides.
Building indemnity insurance protects you, paying out if the builder dies, disappears or becomes insolvent before the work is finished or defects are fixed. It is required for domestic building work worth $20,000 or more that needs development approval, and the minimum cover for a single house is $250,000. A re-roof that needs no approval can fall outside that rule even when the price is well over $20,000, so ask your roofer which category applies. Statutory warranties, which are guarantees set by law, apply to domestic building work whatever its value, and claims under them must be started within five years after completion. Ask for the certificate of insurance before paying the deposit on any re-roof that needs approval, and keep it with the contract.
| Contract | Written Contract | Deposit Limit | Indemnity Insurance |
|---|---|---|---|
| Roof repair under $20,000 | Advised, not required by law | $1,000 | Not required |
| Re-roof over $20,000, no approval | Required, with Form 1 | 5 per cent of the price | Not required |
| Re-roof over $20,000 with approval | Required, with Form 1 | 5 per cent of the price | Required, at least $250,000 cover |
| Roofing work of any value | Statutory warranties for five years | Later payments for work done | Licensed contractor needed |
Slate, Iron, Terracotta and Concrete: How Adelaide Roofs Were Built
Adelaide's roofs follow the city's building periods, and knowing which one you have helps a roofer price the right repair. Timber shingles, thin wooden tiles usually cut from local eucalyptus, were the most common roofing in the colony's first years, but the City of Adelaide banned them and thatch in 1858 as a fire risk. Slate was found at Willunga in 1840, and the mid-grey stone went onto many Adelaide buildings, including Bonython Hall and St Peter's Cathedral. Heritage South Australia and the City of Adelaide set out this history in a 1999 guide published by the Department for Environment and Water.
Rolled galvanised iron, sheet iron coated with zinc to slow rust, was first imported from Britain in about 1850 and soon became popular for its low cost, large sheets and resistance to fire. Corrugated sheet remains the traditional look for villas and cottages of that period, and heritage guidance favours it when they are re-roofed. Marseilles pattern terracotta tiles, interlocking clay tiles named after the French city of Marseille, arrived in the 1890s, and local production of Marseilles-type tiles began in 1922. Concrete tiles became the most common choice from the 1950s, which is why so many postwar houses carry them today.
Each era needs different skills, so ask any roofer about their experience with your material before you book an inspection. Slate repairs call for someone who can punch nail holes in slates and fix them by hand, and our slate roofing page explains what that work involves. Terracotta and concrete tiles can crack under a careless step, so ask how the roofer plans to move across the roof without damage. Monier makes concrete and terracotta roof tiles, including a Marseille range in terracotta. Bristile Roofing makes terracotta and concrete roof tiles in Australia, which is worth knowing when a matching profile is needed for a repair. Ask whether the roofer can source matching second-hand tiles too, since an exact match for an older profile can be hard to find new.
A house may also have a mixed roof, such as an iron front with a later tiled or steel addition, and the join where a box gutter or flashing links them often leaks. Before choosing a replacement material, check whether the house is a listed heritage place, since that can narrow your choice. Lysaght makes the Custom Orb corrugated steel profile, which keeps the curved look of traditional iron. Stramit makes Stramit Corrugated roof and wall cladding as well as flatter profiles such as Monoclad. Fielders makes steel roofing and cladding profiles as part of BlueScope Australia.
| Material | When It Arrived | Where You See It | Repair Note |
|---|---|---|---|
| Timber shingles | Colony's first years | Early colonial buildings | Banned in the city from 1858 |
| Willunga slate | Found in 1840 | Churches, halls and grand houses | Hand-fixed repairs by a slater |
| Galvanised iron | About 1850 | Villas and cottages | Check battens and old flashings |
| Marseilles terracotta | 1890s | Houses from the 1890s onward | Match the profile and colour |
| Local Marseilles-type tiles | From 1922 | Interwar houses | Source matching or salvaged tiles |
| Concrete tiles | From the 1950s | Postwar suburbs | Restoration or steel conversion |
Re-Roofing a Listed Heritage Place in Adelaide
Development approval, the formal permission required under South Australia's planning law, is needed for any external alteration to a listed heritage place in the City of Adelaide. Replacing the roof covering of such a house therefore needs approval before the old sheets come off. The council publishes a re-roofing technical note and specifications for corrugated roofing and for gutters and downpipes. Its heritage architects can also give advice on a specific property, and details are on the City of Adelaide website. Norwood Payneham and St Peters council also treats re-roofing a local or State heritage place as development, so an application is needed. A clear application names the roofing material, profile and colour, and shows any change to the gutters, downpipes or flashings.
Heritage guidance in Adelaide favours materials close to the original. The Norwood Payneham and St Peters fact sheet names traditional galvanised corrugated sheet as the most suitable material and says unpainted Zincalume, a bare silver steel coated with zinc and aluminium, is not appropriate. The same fact sheet presents Colorbond steel in suitable colours as a popular alternative. It describes OG gutters, with an S-shaped moulded front, as the most common type in the Victorian and Edwardian periods, and D gutters, D-shaped from the end, for houses built after about 1920. Round metal downpipes with flat straps were usual, PVC should be avoided and decorative finials, the ornaments on ridge ends, should be restored wherever possible. You can compare prices for this specialist work in our heritage roofing guide.
The Planning and Design Code, the state's rulebook for development, and its maps are published on the PlanSA portal, which is also where development applications are lodged. Ask the council early whether your re-roof needs approval, since the answer depends on the listing and the work planned. Allow time for the application when you plan the job, and do not let a roofer start stripping a heritage roof before approval is granted. Our 2027 estimates put a heritage assessment at $400 to $800 and help with the approval at $200 to $500.
| Item | Typical Guidance | Who Decides | Cost Guide |
|---|---|---|---|
| Re-roof of a listed heritage place | Development approval first | Council | Approval help $200 - $500 |
| Roof covering | Galvanised corrugated sheet, not Zincalume | Council heritage advice | Priced on quote |
| Gutters | OG before about 1920, D after | Heritage specification | Priced on quote |
| Downpipes | Round metal with flat straps, no PVC | Heritage specification | Priced on quote |
| Lead flashing work | Repair to match the original | Roofer and council | $400 - $2,000 |
| Heritage assessment | Written report before design | Heritage consultant | $400 - $800 |
| Conservation documentation | Record of the roof before work | Heritage consultant | $300 - $600 |
| Traditional repairs | Like-for-like materials and fixing | Roofer with heritage experience | $500 - $3,000 |
Falls, Fragile Sheets and the Two Metre Rule From July 2026
From 1 July 2026, South Australia lowered the height at which construction work is classed as high risk construction work, which needs extra safety planning by law, from three metres to two. Any roof work with a fall risk of more than two metres now needs a safe work method statement (SWMS), a written plan listing the dangers and how each will be controlled, before it starts. SafeWork SA reported that most falls from over two metres between 2020 and 2022 happened in residential construction. Ladders should only be used once scaffolding and elevating work platforms, the powered lifts that raise a worker, have been considered and ruled out. The SafeWork SA guidance lists temporary roof edge protection, such as guardrails, as a fall prevention device. Expect quotes for single and double storey roofs to include a line for edge protection or scaffold.
SafeWork SA says to treat every roof as fragile, likely to give way underfoot, until a competent person checks it, since asbestos cement, fibre cement, corroded steel and polycarbonate skylights can break without warning. Controls include guardrails, crawl boards that spread a worker's weight and safety mesh, a wire net under the sheets that catches a falling worker, made to Australian Standard AS/NZS 4389. Kattsafe makes anchor points, static lines (fixed cables that a harness clips to) and guardrails that are used for height safety on roofs. Solatube makes tubular skylights and roof ventilation, and any old plastic dome being replaced should be treated as fragile until it is removed. Where nobody can confirm that safety mesh was fitted under an old roof, SafeWork SA says to treat the roof as having no mesh and as dangerous.
Safety Checks Before Anyone Climbs Up
Old Trusses, Heavier Roofs and Verandahs Fixed to the Fascia
Prefabricated roof trusses, the factory-made triangular frames that carry many roofs, were sometimes built between 1970 and 1997 with nail-plates, the toothed metal plates joining the timbers, that later proved faulty. The South Australian Government warns that affected trusses can fail, and lists timber trusses carrying a tiled roof as affected. In most houses the many internal walls make a complete roof collapse unlikely. Sagging ceilings or dents in the cornice, the moulding where walls meet the ceiling, should still be checked by a qualified professional. Only an on-site inspection can show whether your trusses carry the faulty plates. If your roofer sees these signs while working, ask for that check before any extra load goes onto the frame.
Verandahs and carports fixed to the house roof carry their own risks, as state guidance warns that the existing frame may not carry the extra load and thin metal fascias spread that load poorly. The corners of a hipped roof, which slopes down on all four sides, are its weakest point, and the roof must also be tied down to the walls so strong wind cannot lift it. Fixing a new structure to the roof may cancel the structural warranty on the existing house. Any solar panels on a roof being replaced should be disconnected and refitted by a licensed electrician, and our guide to hiring an electrician in Adelaide covers that trade. A roofer can flag these issues while on the roof, but the structural check itself is a job for a builder or an engineer.
Before Loading or Altering an Old Roof Frame
Asbestos Cement Roofs on Houses Built Before the Mid-1980s
Houses built before the mid-1980s may contain asbestos cement, a cement sheet reinforced with asbestos fibres, in roof sheeting, eaves, flues and verandah roofs. Never clean asbestos cement with a water blaster or any other high pressure water jet, since that can spread loose fibres and dust. Painting or sealing asbestos cement without sanding, cutting or drilling it is treated as maintenance, but dry sanding, wire brushing or scraping is unsafe. Any roof sheet that needs significant work should be removed and replaced with a non-asbestos product rather than patched. A business cannot remove more than 10 square metres of non-friable, or bonded, asbestos, where the fibres are held firmly in cement, without an asbestos removal licence. A whole roof is far larger than that, so it needs a licensed removalist, and our asbestos roof removal page sets out the process.
A Class B licence allows removal of any amount of bonded asbestos, a Class A licence also covers friable asbestos, which crumbles easily, and both holders must notify SafeWork SA five days ahead. By law, asbestos waste must go to a licensed transfer station or waste depot, and the EPA publishes a list of licensed facilities. Our 2027 estimates put asbestos roof removal at $35 to $60 per square metre plus $15 to $30 per square metre for disposal, or $8,000 to $15,000 for an average house. Removal followed by a new Colorbond roof is estimated at $18,000 to $35,000. Ask the removalist for the clearance certificate, a written check confirming the area is safe, once the work is finished, and keep it with the house records for any future sale.
| Task | Who Can Do It | Rule | Cost Guide |
|---|---|---|---|
| Sample testing | Testing service or removalist | Test before any cutting or drilling | $30 - $80 per sample |
| Painting or sealing intact sheets | Painter or roofer | No sanding, cutting or drilling | Priced on quote |
| Water blasting | Nobody | Never water blast asbestos cement | Not permitted |
| Up to 10 m² of bonded sheet | Business without a licence | Safe work procedures still apply | Priced on quote |
| More than 10 m² of bonded sheet | Class A or Class B licence holder | Notify SafeWork SA five days ahead | $35 - $60 per m² |
| Disposal of removed sheets | Licensed removalist | Licensed transfer station or depot only | $15 - $30 per m² |
| Clearance after removal | Competent person or assessor | Clearance certificate issued | $200 - $400 |
Storm Damage, the SES and Your Home Insurer
For emergency help after a storm, call the State Emergency Service (SES) on 132 500. The SES advises clearing gutters, downpipes and drains, trimming branches that could fall on the house and repairing roof damage before a storm arrives. Its storm advice also suggests checking that your insurance policy is current and covers storm damage, and the full checklist is on the SA State Emergency Service website. Photos of the damage taken from the ground, along with any water stains inside, will help both your insurer and the roofer. Stay off the roof yourself, since wet tiles and loose sheets are easy to slip on or fall through. Once the immediate danger has passed, a roofer can make the roof safe first and then quote the permanent repair separately.
A make-safe is a temporary repair, such as a tarp or a refixed sheet, that stops more water getting in until permanent work is done. Our 2027 estimates put a business hours make-safe at $450 to $650, rising to $650 to $900 after hours and $850 to $1,100 overnight or on a public holiday. A storm repair to one part of a suburban roof is estimated at $600 to $3,200, while structural repairs after a falling tree or branch hits the house can reach $6,000 to $20,000 or more. Ask your insurer how it wants quotes handled before you approve a permanent repair. Keep every invoice, photo and report together for the claim. Emergency call-outs and claim steps are covered in more detail on our storm damage repairs page.
Water that reaches the ceiling can stain or soften the plasterboard, and a sagging ceiling should be kept clear until it has been checked. Repairs to a water-stained ceiling are estimated at $550 to $2,400, and an Adelaide plasterer can quote once the roof is watertight again. If wet carpet or a ceiling collapse means rooms must be emptied, an Adelaide removalist can move furniture into storage while the repairs go ahead. When an insurer rejects a claim and you cannot resolve it directly, the Australian Financial Complaints Authority handles home insurance complaints free of charge.
| Item | 2027 Estimate | When It Applies | Note |
|---|---|---|---|
| Business hours make-safe | $450 - $650 | Weekday call-out | Tarp or temporary fix |
| After hours or weekend make-safe | $650 - $900 | Evenings and weekends | Higher call-out rate |
| Overnight or public holiday make-safe | $850 - $1,100 | Late night or holiday | Highest call-out rate |
| Extra tarping, per section | $150 - $350 | Large or several openings | Added to the call-out |
| Localised storm roof repair | $600 - $3,200 | Lifted sheets or broken tiles | Permanent fix |
| Structural repair after a tree strike | $6,000 - $20,000+ | Damaged rafters or trusses | Engineer may be needed |
| Water-stained ceiling repair | $550 - $2,400 | After water reaches a room | Once the roof is watertight |
Box Gutters, Valleys and Overflow on Older Adelaide Homes
A box gutter is a flat-bottomed gutter that sits inside the roof line, often between two roofs or behind a parapet, a wall that rises above the roof edge. They are often found where a later addition meets the original roof, and when one blocks, the water can end up in the ceiling. The Housing Provisions of the National Construction Code, the national building rules for homes, call for particular care with box and valley gutters that sit above rooms. They also require overflows, openings that let spare water escape, so that water from a heavy storm is directed away from the building even if the gutter is blocked. A sump, the box that collects water before it drops into the downpipe, is a common weak point. Our 2027 estimates put a box gutter inspection, including a check of how much water it can carry, at $300 to $750.
Depending on what has failed, cleaning out the gutter and sump costs about $280 to $650, joint and seam repairs $350 to $900, and a new sump or outlet $450 to $1,400. Fitting an overflow to an older gutter that has none, so excess water goes safely outside, is estimated at $600 to $1,800. Replacing a box gutter runs at about $280 to $650 per metre, while ceiling damage after a failure can cost $1,200 to $4,500 to fix. Sumps, overflows and the metal gutter linings are explained in more detail on our box gutter repairs page. Ask the roofer to check that the downpipe below each sump is large enough for the roof area it drains.
Eaves gutters along the roof edge need regular clearing too, particularly under large trees. The Housing Provisions set a maximum of 12 metres of gutter for each downpipe on houses built to them. Metroll makes roofing and rainwater products, including gutters, fascia, flashings and downpipes. Mesh guards can cut leaf build-up, and our gutter guard installation page compares the options.
| Job | 2027 Estimate | What It Fixes | Note |
|---|---|---|---|
| Inspection and capacity check | $300 - $750 | Leaks with no clear cause | Ask for photos of the sump |
| Gutter and sump clean-out | $280 - $650 | Blockages | Worth doing before winter |
| Joint and seam repair | $350 - $900 | Leaking joins | Short-term fix on old linings |
| Sump or outlet replacement | $450 - $1,400 | Undersized or rusted outlets | Check the downpipe size too |
| Overflow retrofit | $600 - $1,800 | No escape route for water | Sends overflow outside |
| Box gutter replacement | $280 - $650 per m | Rusted or split linings | Ceiling repairs extra |
| Ceiling damage after a failure | $1,200 - $4,500 | Water through the ceiling | Plasterer usually needed |
Roofs That Feed a Rainwater Tank
Plenty of Adelaide homes collect roof water in a tank, and SA Health sets out what makes a roof suitable for it. Its rainwater guidance says lead flashing and chemically treated timber should not be used on the parts of a roof that drain to a tank. Roofs painted with lead-based paint or coated with bitumen-based material are also unsuitable, while most other roofs can be used. Freshly applied acrylic paint and some new tiles can change the colour or taste of the water, so the water from the first few rainfalls may need to be thrown away. A first-flush diverter, a fitting that sends the first dirty rain away from the tank, is recommended. Advice on tanks and drinking water is on the SA Health website.
Tell your roofer about the tank before they choose flashing, sealant or coating products, since old lead flashings can be swapped for a lead-free alternative during a re-roof or restoration. Dulux makes the Acratex roofing range of coatings for roof restoration. Haymes makes roof coatings in its Protective Solutions range for Australian roofs. Moving a tank or connecting new downpipes to it is plumbing work, which our guide to hiring a plumber in Adelaide covers. A new tank also needs a level, solid base, and an Adelaide concreter can pour a slab for it.
Roof Checks for a Rainwater Tank
Door-Knocking Roofers and Unsolicited Offers
In March 2024, Consumer and Business Services warned of unlicensed travelling tradies going door to door offering roofing work around Klemzig in Adelaide's north. The regulator said the group appeared to be using a legitimate business's name and licence details. Its advice was to turn down uninvited offers of roofing work and to check licence details for yourself. Find a phone number independently instead of trusting the one given at the door. CBS said work by unlicensed travelling tradies is often incomplete or poor quality and frequently has to be redone. Concerns about a tradie can be reported to CBS on 131 882.
Australian Consumer Law calls a sale that starts with an uninvited knock or call and is worth $100 or more an unsolicited agreement, and gives you extra protection. You have 10 business days to cancel, starting on the first business day after you sign or receive the agreement. Door-to-door sellers can only call on weekdays between 9 am and 6 pm and on Saturdays between 9 am and 5 pm, and must leave straight away when asked. The seller cannot take payment during the cooling-off period, except for electricity, gas or emergency repairs, and the ACCC explains these unsolicited selling rules in full. Because emergency repairs are the exception, check that any work you pay for upfront really is urgent and is described in writing.
Signs of a Roofing Door-Knock Problem
When an Adelaide Roofing Job Goes Wrong
Raise any problem with the roofer in writing first, with photos and the dates when you noticed it. Leaks after new work often trace back to flashings, valleys or places where pipes pass through the roof, such as flues and vents, so ask the roofer to return and inspect them. If the business is unlicensed or will not respond, you can report it to Consumer and Business Services on 131 882. Statutory warranties let owners claim for defective domestic building work for up to five years after completion. Claims under the Building Work Contractors Act are lodged as a building dispute, and the Courts Administration Authority website explains the steps. Keep the contract, quote, invoices and any approval documents in one place.
Some faults cannot wait for a dispute to be settled. If a ceiling sags, bulges or drips after rain, keep people away from it and call a roofer to make the roof safe. Termite damage found in roof timbers during the work needs a separate inspection, and an Adelaide pest controller can assess it. Urgent call-outs across the state are covered on our emergency roof repairs page.
What to Look Out For in an Adelaide Roofing Quote
Start by checking what each quote leaves out, since the lowest total can hide missing items. A re-roof quote should name the sheet or tile product, profile and colour, and say whether sarking, battens, flashings and gutters are new or reused. It should also list removal and disposal of the old roof, with asbestos testing and removal shown separately where the house predates the mid-1980s. Edge protection or scaffold belongs on its own line, since the two metre rule covers most work on a house roof. Repair quotes should say exactly which tiles, valleys or flashings are being replaced and how many metres of ridge are being rebedded. A restoration quote should name the coating products and the number of coats.
Some warning signs in an Adelaide roofing quote should make you stop and check, starting with a missing licence number or one that does not match the CBS register. Prices for work on a listed heritage place with no mention of approval suggest a step has been missed or left for you to sort out. Any suggestion to water blast or sand an asbestos cement roof is a reason to turn that roofer away. A deposit above $1,000 on a job under $20,000, or above 5 per cent on a larger one, is more than the law allows. Pressure to sign on the day, especially after an uninvited knock, is another reason to say no.
Items Every Adelaide Roofing Quote Should Show
Any plan to water blast, sand or cut an asbestos cement roof.
Deposit requests above $1,000 on a roofing job worth less than $20,000.
Getting Adelaide Roofing Quotes You Can Compare
Give every roofer the same description so that their prices can be compared fairly. Include the suburb, the year the house was built if you know it, the roof material and whether the house is a listed heritage place. Note where leaks appear inside, whether there are solar panels, skylights, a rainwater tank or a verandah attached to the roof, and how high the gutters sit. Photos from the street and the backyard, plus any ceiling stains, help a roofer judge the job before the visit. If you suspect asbestos, have a sample tested first so every quote starts from the same answer. Testing is estimated at $30 to $80 per sample.
Three quotes give a useful spread of prices for a re-roof or restoration. Ask how long each price holds, when the roofer can start and how wet or windy weather could change the timing. Find out whether old sheets or tiles will be stripped and covered in a single day, since an open roof is exposed to rain overnight. Ask whether insulation will be checked or added while the roof is open, and our roof insulation page explains the options.
Bradford makes insulation, acoustic and energy saving products for Australian homes and commercial buildings. Bondor makes SolarSpan insulated roof panels, which are listed in the roofing range on its Australian website. Ampelite makes fibreglass and polycarbonate roof sheeting, along with roof ventilators such as the Spinaway, a whirlybird that spins in the wind to draw hot air out of the roof space. After the job, keep the contract, product warranties, any engineer's report and the approval documents together, along with the date of the work and the roofer's licence number. A future buyer's building inspector may ask to see the roof warranty and any asbestos clearance certificate. Ask for any product warranty paperwork to be issued in your name, since you may need it if a fault appears years later.
Roofers Across Adelaide
Roofing prices on this page apply across metropolitan Adelaide. Roofers working near their base rarely add a travel charge, while jobs in outer suburbs and at the edge of the Adelaide Hills sometimes carry one.
▶ Inner Adelaide & CBD 10 areas
▶ Eastern Suburbs 10 areas
▶ Southern Suburbs 10 areas
▶ Western Suburbs & Beaches 10 areas
▶ Northern Suburbs 10 areas
Adelaide Roofer FAQ
Can a plumber fix my gutters without a building licence?
Is it safe to water blast an old asbestos cement roof?
What should I do if a roofer knocks on my door after a storm?
How can I tell if my roof trusses have faulty nail-plates?
Who do I call when a storm lifts part of my roof?
Can a roof with lead flashing feed a drinking water tank?
Does a $25,000 re-roof need a written contract?
What changed for roof safety in South Australia in July 2026?
What gutters suit a heritage listed Victorian villa?
Can a new verandah be fixed to my existing roof fascia?
Adelaide Roofing Specialists
Related Services
For Trades & Contractors - SA
Roofing work in Adelaide often relies on other trades for the parts a roofer cannot do. Solar panels and roof cabling need a licensed electrician, tank and downpipe connections need a plumber, and asbestos sheeting over 10 square metres needs a licensed removalist. These services can be booked alongside a roofing job across the metropolitan area.
Compare Adelaide Roofing Quotes
Tell us your suburb, the roof material, the age of the house and where water shows inside, and compare quotes from local Adelaide roofers all pricing the same job.
Get Free Roofing QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across South Australia? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.