Looking for a Concreter in Adelaide?

Tell us your suburb, the area to be concreted, the finish you want, what has to be removed first and how close a concrete truck can park. We will pass that description to local concreters across the metropolitan area, so every quote you receive is based on the same details.

Get Free Concreting Quotes

Adelaide Concreting Price Guide

Plain broom-finish driveway$120 - $155 per m²
Exposed aggregate driveway$130 - $175 per m²
Double driveway, broom finish$5,000 - $8,000
Double driveway, exposed aggregate$6,000 - $9,500
Path or footpath, broom finish$100 - $140 per m²
Patio slab, broom finish$110 - $150 per m²
Stamped concrete$165 - $210 per m²
Crossover replacement, standard$1,200 - $2,500
Old concrete removed and disposed of$50 - $90 per m²
Concrete pump with operator$600 - $1,200 per day

These are estimated Adelaide price ranges for 2027. Your price depends on the area, the access and how much old concrete has to come out. Council permits, engineering, sealing and any stormwater plumbing add to the total.

Hire a Concreter Adelaide SA - Get Local Quotes

Concrete work across Adelaide runs from a single path beside a villa to a double driveway, a shed slab or a new crossover at the kerb. Much of the metropolitan area sits on reactive clay, which swells when wet and shrinks as it dries, so the base, steel mesh and joints decide how long a slab stays sound. The crossover, the part of a driveway that crosses the footpath and kerb, sits on council land, and each council sets its own rules for strength, thickness, width and distance from street trees. Pouring in a city street can also need a council permit for the truck and pump, and leftover slurry, the cement wash water, must never go into the gutter. Runoff from the new surface has to drain to a lawful outlet, and a stormwater pipe under the slab or roadside verge is work for a licensed plumber. Older inner suburbs with narrow side gates often need a pump to reach a rear yard, which adds a day rate to the price. Concrete work counts as building work under South Australian law, so the business you hire needs a licence from Consumer and Business Services whatever the size of the job. The prices on this page are 2027 estimates for the metropolitan area, before council fees, engineering or plumbing. Removing old concrete, pumping to a rear yard and the finish you choose can each move the total by thousands of dollars. A written quote that names the strength, thickness and mesh is the fairest way to compare concreters. Post your job on The Quote Yard and we will connect you with local concreters across Adelaide who can quote on it.

Adelaide Concrete Jobs We Cover

Concreting across metropolitan Adelaide ranges from a short path or a shed slab on a small infill block to a full driveway replacement with a new crossover and stormwater outlet. We can connect you with local concreters who all price the same written description of your job.

Get Free Quotes

At a Glance - Adelaide Concrete Prices, 2027 Estimates

Job Price Range How It Is Charged What Drives It In Adelaide Who Can Do It
Broom-finish driveway $120 - $155 per m² Per square metre Base depth, steel mesh and access Licensed concreter
Exposed aggregate driveway $130 - $175 per m² Per square metre Stone type and washing off Licensed concreter
Coloured concrete, oxide through the mix $140 - $185 per m² Per square metre Colour and volume of concrete Licensed concreter
Stencilled concrete $155 - $195 per m² Per square metre Pattern and sealing Decorative concreter
Stamped concrete $165 - $210 per m² Per square metre Pattern, colour and sealing Decorative concreter
Path or footpath $100 - $140 per m² Per square metre Width and formwork Licensed concreter
Patio slab $110 - $150 per m² Per square metre Drainage slope and edges Licensed concreter
Crossover, single width $1,800 - $3,000 Fixed after site visit Council specification and kerb work Licensed concreter with council consent
Crossover widening $1,200 - $2,500 Fixed after site visit Kerb, gutter and footpath work Licensed concreter with council consent
Old concrete removed $50 - $90 per m² Per square metre Thickness, mesh and tip fees Concreter or demolition contractor
Concrete pump hire $600 - $1,200 per day Daily, with operator Distance from the street Pump operator
Reinforced shed slab, about 100 m² $13,000 - $18,000 Fixed price Soil type and engineering Licensed concreter
Soil classification report $300 - $700 Per site Soil drilling and testing Geotechnical (soil) engineer

What Pushes an Adelaide Concrete Bill Up

What is involved
Reactive clay, which swells and shrinks with moisture, needs a well compacted base and the right steel mesh. Soft or wet ground found on the day may have to be dug out and replaced before any concrete goes in.
Narrow side access can rule out wheelbarrows for a rear yard pour. A concrete pump, which pushes the mix through a hose, then adds a day rate to the quote.
Crossover work follows the council's own specification for strength, thickness and width. Kerb cutting, footpath pavers and permit fees all sit on top of the driveway price.
Old concrete, pavers or asphalt have to be broken out and taken away first. Thick slabs with heavy mesh take longer to break and cost more to dump.
Ask every concreter to list concrete, labour, pump hire, removal and council fees on separate lines, and to state the strength, thickness and mesh. Quotes set out that way can be compared line by line.

Setting Up an Adelaide Concrete Job

Adelaide concreters usually price driveways, paths and patios by the square metre, and our 2027 estimates put a plain broom-finished driveway at $120 to $155 per square metre. A broom finish is the light texture dragged across wet concrete with a stiff broom so that tyres and shoes can grip. Most jobs are quoted as one fixed price once the concreter has measured the area, checked the access and looked at what has to come out first. For the full range of concrete work offered around the state, start with our guide to concreting services in South Australia. Hiring in metropolitan Adelaide brings its own council, licensing, drainage and site rules, and each of them can change a concrete quote.

A short written brief helps every concreter price the same job. Note the area in square metres, the finish you want, whether old concrete or pavers must be removed and how close a concrete truck can park. Mark any street tree, stobie pole (the steel and concrete power poles used across South Australia) or stormwater pit near the planned crossover. Photos of the frontage, the kerb and the rear yard often save the concreter a second trip to measure.

Adelaide Concrete Prices for 2027 (Estimates)

A standard double driveway of about 40 to 50 square metres with a broom finish comes to roughly $5,000 to $8,000 by our 2027 estimates. Exposed aggregate, where the top layer of cement paste is washed away to show the stones in the mix, lifts a double driveway to about $6,000 to $9,500. Single driveways of 20 to 25 square metres sit near $2,500 to $4,000 in broom finish and $3,200 to $4,600 in exposed aggregate. Paths and footpaths run at about $100 to $140 per square metre, and formwork, the timber or steel edging that holds wet concrete in shape, takes a bigger share on narrow runs. Stamped concrete, pressed with patterned mats while it is still soft, costs about $165 to $210 per square metre. Driveway finishes and thicknesses are compared in more detail in our concrete driveway guide.

Removing old concrete before a new pour costs about $50 to $90 per square metre, and thick slabs with heavy steel reinforcing mesh sit at the top of that range. Reinforced shed slabs of about 100 square metres come to roughly $13,000 to $18,000, while a 50 square metre garage slab is about $6,000 to $9,000. A soil classification report, a geotechnical test that rates how much the ground will move, adds about $300 to $700, and an engineer's slab design adds $1,500 to $4,500. Slab types and the engineering behind them are compared in our concrete slabs guide. Sealing, council permit fees and stormwater connections are priced on quote and should appear as separate lines.

Job Adelaide Range Pricing Basis Main Cost Driver
Single driveway, broom finish $2,500 - $4,000 Fixed for about 20 to 25 m² Removal and access
Double driveway, broom finish $5,000 - $8,000 Fixed for about 40 to 50 m² Base, mesh and joints
Single driveway, exposed aggregate $3,200 - $4,600 Fixed price Stone choice and sealing
Double driveway, exposed aggregate $6,000 - $9,500 Fixed price Stone choice and sealing
Path or footpath, broom finish $100 - $140 per m² Per square metre Width and formwork
Patio slab, broom finish $110 - $150 per m² Per square metre Drainage slope and edges
Exposed aggregate pool surround $130 - $175 per m² Per square metre Shape and drainage
Garage slab, about 50 m² $6,000 - $9,000 Fixed price Soil type and thicker edges
Engineer slab design $1,500 - $4,500 Per design Soil type and slab type
Short-load fee from the plant $200 - $400 Per small order Volume ordered

Square Metre Rates, Short Loads and Pump Hire

Premixed concrete arrives in agitator trucks with a turning drum, and the batching plant that mixes it adds a short-load fee when an order is well below a full truck. That fee runs at roughly $200 to $400 by our estimate, which matters on a small path or a single shed footing. Some concreters fold it into their square metre rate, while others list it separately, so ask where it sits in each quote. Combining a path, a patio and a crossover into one pour day can spread the fee across a larger volume of concrete.

A concrete pump with its operator costs about $600 to $1,200 per day when the truck cannot reach the pour. Rear yards behind a villa with a narrow side gate often need one, because wheeling concrete a long way in barrows is slow and the mix starts to stiffen. A line pump pushes concrete through hoses laid down the side of the house, while a boom pump reaches over the roof from the street. Either kind of pump may need space on the road or footpath for the day, and some councils need a permit for that space. Boral makes concrete for homes and commercial work, and its delivery dockets, the slips handed over with each truck, show the strength ordered. Holcim makes ready-mix concrete, and adding water on site to help any mix flow weakens the finished concrete.

How Adelaide Concreters Price a Job

What is involved
Square metre rates suit driveways, paths and patios with a clear area and a named finish.
Fixed prices suit slabs, footings and crossovers that follow engineering or a council specification.
Short-load fees apply when the order is well below a full truck of concrete.
Pump hire, removal of old concrete and tip fees should each appear on their own line.
A quote that lists only a square metre rate may leave out the pump, the short load and the removal of what is already there.

Why a Concrete Driveway Counts as Building Work in SA

The Building Work Contractors Act 1995 defines a building to include a wall or structure, so a driveway, slab, footing or retaining wall is building work. Regulations that came into operation on 1 September 2026 also name paving as building work, and digging out or filling a site for that work is covered too. Every person or business working as a building work contractor in this state must hold a licence from Consumer and Business Services, including subcontractors. No dollar value is set below which a concreter can work without one, so a small path is treated the same as a large slab. Every licensed job must also run under a registered building work supervisor, the person approved to oversee the work, often the owner on a small crew.

A licence can be looked up on the public register kept by Consumer and Business Services before any quote is signed. Licence conditions can restrict what kind of work the holder may contract for, so read them and not just the business name. Specified building work calls for $10,000 or more in net assets, what the business owns minus what it owes, and a business below that figure may only hold a restricted subcontract licence. A concreter pouring the slab for a new home works under the builder, who holds the contract with you. How the main builder brings in concreters and the other trades is explained in our guide to hiring a builder in Adelaide. Any plumbing work, such as a stormwater pipe laid under the new slab, needs a separate plumbing licence.

Who Needs What on an Adelaide Concrete Job

What is involved
A building work contractor licence for the business that signs the contract with you.
A registered building work supervisor overseeing the work on site.
A plumbing licence for any stormwater pipe laid under or beside the new slab.
Council authorisation before any work on the crossover, kerb or footpath.
Make sure the licence number printed on each quote belongs to the business that will sign the contract.

Contract Value, Deposits and Indemnity on a Concrete Job

Section 29 of the Act caps the deposit a concreter can take at $1,000 on a domestic contract priced under $20,000. At $20,000 or more the cap becomes 5 per cent of the price, and later payments should follow work already finished. Since 10 November 2025 the $20,000 figure has also marked the upper limit of minor domestic building work, which carries lighter contract rules. A combined driveway, crossover, path and patio can easily cross that line, while each part priced on its own would not. Splitting one project into separate contracts to stay under the figure removes protections that the single larger contract would carry.

Building indemnity insurance, which protects owners when a contractor cannot finish or fix the work, applies only to contracts of $20,000 or more needing development approval. Whether a driveway or path needs approval depends on the address and the work, so ask the council before relying on either answer. A slab for a new garage or extension is usually part of an approved project, and it comes ahead of the frame, the roof and the plasterer working on the walls. Statutory warranties under section 32, promises the law adds to every contract, require work done in a proper manner to accepted trade standards, and claims must start within five years of completion.

Indemnity policies taken out since 10 November 2025 must carry total cover of at least $250,000, up from $80,000 for older policies. A policy may exclude the first $400 of each claim, so very small defects are not worth claiming on it. The insurance pays out only if the contractor dies, disappears or becomes insolvent, so it does not replace the concreter's duty to fix faults. Ask for the certificate before paying anything on an approved slab, and keep it with the contract and the approval.

Contract Deposit Cap Written Terms Indemnity Insurance
Under $20,000 $1,000 Minor work, written quote advised Not required
$20,000 or more, no approval needed 5 per cent of the price Full written contract Not required
$20,000 or more, approval needed 5 per cent of the price Full written contract Required, cover of at least $250,000
Any value of concrete work Progress payments after the deposit Five year statutory warranties apply Licensed contractor required

Section 221 Permission for the Crossover and Kerb

The crossover is the section of driveway between your boundary and the road, including the lowered kerb and the invert, the dip in the gutter that lets cars cross it. Because it sits on council land, Adelaide councils treat the work as an alteration of a public road that needs authorisation under section 221 of the state's Local Government Act 1999. Port Adelaide Enfield asks for a plan showing the property boundary, the width and length of the crossover, and its distance from nearby trees, poles and pits. The council charges a $35 application fee for works on its land, and processing takes about seven working days. It also asks for a certificate of currency, an insurer's proof that a policy is in force, showing public liability cover of at least $20 million. Port Adelaide Enfield does not contribute to the cost of a new crossover, and a council officer inspects the completed work.

Specifications differ between councils, which is why a crossover quote cannot simply be copied from one suburb to the next. Unley calls for concrete of at least 25 MPa supplied to AS 1379, the Australian Standard for specifying and supplying concrete. MPa, or megapascals, measures how much crushing load the concrete can carry, and Burnside's general conditions accept a lower minimum of 20 MPa. Both councils set 100 millimetres as the minimum residential thickness and 150 millimetres for non-residential work, where Unley also asks for F72 mesh, a standard grade of steel reinforcing mesh. Unley limits the invert to 4 metres for a single entrance and 6 metres for a double, while Burnside limits a gutter crossing to 5.5 metres.

Distances from street trees, poles and pits matter most on narrow frontages. Unley sets 1.5 metres from the trunk of a street tree up to 300 millimetres in diameter, and larger trees need advice from its tree specialist, the arborist. Both councils ask for a one metre gap to stobie poles, and Unley applies the same gap to side entry pits, the kerbside openings that take road runoff. Burnside does not allow a gutter crossing within 10 metres of an intersection unless the council approves it. Ask the concreter to mark these distances on a site plan before the application goes in. Typical prices and the general approval steps are set out in our vehicle crossovers guide.

Moving a driveway leaves an old crossover behind, and councils expect it to be closed properly. Port Adelaide Enfield requires the landowner to pay to remove an unused crossover, take out its invert and rebuild the upright kerb and footpath to match. Burnside likewise requires the old gutter crossing to be closed and the kerb, footpath and verge, the council strip beside the road, put back when a new crossing replaces it. The state government has also consulted on a draft design standard for residential crossovers, covering location, what drivers can see and the distance from street items such as signs and bins. Until any standard is adopted, each council's own specification is the one your concreter has to meet.

Rule City of Unley City of Burnside What It Means for a Quote
Minimum concrete strength 25 MPa to AS 1379 20 MPa to AS 1379 Grade shown on the docket
Residential thickness 100 mm minimum 100 mm minimum Base depth matters too
Non-residential thickness 150 mm with F72 steel mesh 150 mm minimum Higher rate per m²
Maximum width at the kerb 4 m single, 6 m double 5.5 m, or 7 m shared Fix the layout first
Street trees 1.5 m from trunks up to 300 mm wide 1.5 m for new plantings, existing trees set by council May move the crossover
Stobie poles 1 m clearance 1 m clearance Moving a pole is costly
Footpath across the crossover Paved to match existing pavers Surface type and colour approved by council Ask before ordering
Timing 7 days notice before work Finish within 12 months of approval Book the pour around it

Trucks, Pumps and Footpaths in the City of Adelaide

Houses in North Adelaide and the inner city have little off-street space, so the truck and pump often stand on the road during a pour. The City of Adelaide requires a City Works permit, its approval to use public space, before work on its roads, footpaths and park lands, and publishes a guide for concrete pumps and pours. Applications must arrive at least five business days before the start date, or four to six weeks ahead when public consultation is needed. The fee for activities such as concrete pours, trenching and excavation is $1.85 per square metre per day. A minimum charge of $32 and a daily cap of $430 apply to each application.

Your concreter should state in the quote who applies for the permit and who pays the fee. Traffic control, protection for the footpath and cleaning the road after the pour should all be agreed at the same time. Read the current conditions on the City of Adelaide website before booking, because the permit date has to match the pour date. Suburban councils issue their own permits for occupying a road or footpath under sections 221 and 222 of the Local Government Act, so check with your council outside the city.

Footpaths cut or damaged during the job have to be put back to the council's standard. Unley's specification allows 60 millimetre interlocking brick pavers on residential footpaths, or hot mix asphalt at least 30 millimetres thick. It also asks for at least seven days notice before construction work on council land begins. In Burnside, damage to underground services is charged to the person responsible, and any repairs the council makes itself are charged to the owner. A quote that leaves out footpath repairs can leave that cost with you once the concreter has gone.

Item Charge Applies To Note
Concrete pours, trenching, excavation, skip bins $1.85 per m² per day Area of road or footpath used Per application
Minimum charge $32.00 Each application Applies even to a short pour
Daily cap $430.00 Each application Large or long occupations
Hoarding (site fencing) and fixed scaffolding $0.50 per m² per day Area enclosed Same minimum and cap
Local Nuisance Exemption application $250 Noisy work outside allowed hours From 1 March 2025
Lodgement time At least 5 business days Standard permits 4 to 6 weeks with public consultation

Adelaide Clay, Slab Edges and Where Cracks Start

Highly reactive soils are common in South Australia, and much of the Adelaide plains sits on clay that swells in wet months and shrinks through dry ones. University of Adelaide research published in September 2026 recorded field cracks between 5 and 40 millimetres across, reaching as deep as one metre. The same study found ground movement reaching close to the four metre depth recommended for Adelaide residential construction. AS 2870, the Australian Standard for residential slabs and footings, rates each site in classes running from stable sand to extremely reactive clay. A house or garage slab is designed to its site class, but driveways and paths are rarely engineered at all. That difference is one reason a path along the side of an older house can crack well before the driveway does.

Uneven moisture at the edge of a slab does much of the damage. Garden beds watered every night on one side of a path and dry ground on the other make the clay beneath it move unevenly. Large trees draw water from clay well beyond their canopy, and a leaking stormwater pipe can soften the ground under one corner. Control joints, shallow cuts or formed grooves that give shrinkage cracks a planned place to form, should be shown on the quote with their spacing. ARC makes reinforcing mesh and steel bar for slabs, footings and paths. InfraBuild makes reinforcing mesh in square, rectangular and trench forms, though mesh only holds cracks closed and cannot stop clay moving.

The base under the concrete matters as much as the concrete itself. Topsoil and roots should be stripped, soft spots dug out, and crushed rock laid and compacted in thin layers before the formwork goes up. For a garage or shed slab, ask whether the design relies on a soil classification report and who has prepared it. Footings, the concrete bases under walls, posts and verandahs, are a separate job with their own engineering, priced in our concrete footings and foundations guide. Photos of the compacted base and the mesh on chairs, the small stands that lift mesh off the ground, are worth asking for.

Protecting a New Slab on Adelaide Clay

What is involved
Keep garden watering and drippers away from the edges of new paths and driveways.
Fix leaking downpipes and stormwater pipes before the new concrete goes down.
Ask where the control joints will go and when any saw-cut joints will be cut.
Allow for a compacted base and the right mesh for the way the slab will be used.
A fine crack along a planned joint is expected, while a crack that steps across the slab needs a closer look.

Choosing a Finish That Suits an Adelaide Frontage

Exposed aggregate is a popular decorative choice on Adelaide driveways, and its stones hide tyre marks and dust better than plain grey concrete. Coloured concrete has oxide pigment mixed through the whole load, which costs about $140 to $185 per square metre and keeps its colour if the surface wears. Stencilled concrete uses paper templates to create a paver or tile pattern, and runs at about $155 to $195 per square metre. Burnside allows colour on a crossover but asks for the surfacing type and colour to be approved, while Unley wants the footpath section paved to match. Stone choices and costs are covered in our exposed aggregate concrete guide.

Sealers help protect decorative concrete from oil, leaf stains and wear. Crommelin makes concrete and stone sealers for driveways, paths and patios. Dulux makes a concrete and paving paint for older slabs that need a fresh surface. Painting a garage floor or verandah slab is often work for a painter, and our guide to hiring a painter in Adelaide covers how painters price it. Sika makes sealants for expansion and perimeter joints, the flexible gaps left where a slab meets a wall or another slab. Resealing costs, including how often a sealer needs reapplying, sit on our concrete sealing page.

Decorative finishes need more planning on pour day than plain concrete does. Exposed aggregate has to be washed at the right moment, so the crew needs enough hands to finish a large area before it sets too hard. Coloured and stamped work looks best when the whole area comes from consistent loads, so ask how many trucks the job needs. Photos of finished jobs in the same stone and colour are a better guide than a small sample board. On a sloping driveway, ask which finish gives the most grip when the surface is wet.

Finish Adelaide Range Look Watch For
Broom finish driveway $120 - $155 per m² Plain grey with light texture Tyre marks and stains show
Exposed aggregate $130 - $175 per m² Stones visible on the surface Stone type and washing time
Coloured, oxide through the mix $140 - $185 per m² Even colour through the slab Colour match between loads
Stencilled $155 - $195 per m² Paver or tile pattern Wear on turning areas
Stamped $165 - $210 per m² Textured stone or timber look Sealing and slip resistance
Polished concrete, indoors $80 - $150 per m² Ground and polished floor Silica controls during grinding

Where Driveway Runoff Goes: Kerb Outlets and Under-Verge Pipes

A new driveway or patio turns rain that once soaked into the ground into runoff, and that water has to go somewhere lawful. Falls, the gentle slopes built into a slab, should carry water away from the house and toward a grated drain or a garden area. For stormwater piped to the street, Port Adelaide Enfield accepts kerb outlets, pipes through the kerb, of 90 millimetre uPVC (rigid plastic) pipe or 300 by 100 by 8 millimetre galvanised steel culverts. There, under-verge connections, the pipes running beneath the verge to the road, must be at least 225 millimetre class 3 reinforced concrete pipe, a heavy duty grade. Only a licensed plumber or a civil contractor, a firm doing road and drainage work, may do that connection work.

Permeable concrete lets water soak through the slab into the ground below. Boral makes a permeable concrete system, which can suit a parking area where piping runoff to the street is difficult. On reactive clay, water soaking in beside a house needs care, so ask the concreter and an engineer before choosing it there. Roof water from a new garage or carport adds to the load, and our guide to hiring a roofer in Adelaide covers gutters and downpipes. Drain repairs are priced on our stormwater drainage page, and plumber rates sit in the Adelaide plumber guide. Ask whether the concreter or a plumber lays the pipes, since the pour cannot go ahead until they are in.

Driveways that slope down toward a garage need particular care on a clay block. A grated channel drain across the foot of the slope catches water before it reaches the garage door. That drain needs its own outlet, so plan it with the stormwater pipes instead of adding it after the pour. Ask the concreter to show the falls and the drain positions on the drawing attached to the quote.

Connection Material Size Who Installs It
Kerb outlet, first option uPVC footpath pipe 90 mm Licensed plumber or civil contractor
Kerb outlet, second option Galvanised steel culvert, Class D 300 x 100 x 8 mm Licensed plumber or civil contractor
Under-verge connection Class 3 reinforced concrete pipe 225 mm minimum Licensed plumber or civil contractor
Service trench reinstatement Council engineering standard Drawing SK1021 Contractor, may be inspected
Permit for the work Works on council land application $35 fee Owner or contractor

Keeping Slurry and Washout Out of the Street Gutter

Concrete waste appears as a class 1 pollutant, the more serious of two classes, in the Environment Protection (Water Quality) Policy 2015. The same list includes brick, bitumen or concrete cutting wastewater, building washwater, and construction and demolition waste. Nobody may discharge a class 1 pollutant into waters, or onto land where it could reasonably wash into them. Water within a public stormwater system counts as waters under the policy, so the street gutter outside an Adelaide house is covered. Hosing leftover concrete, exposed aggregate wash or saw-cut slurry into the gutter therefore breaks the policy. The Environment Protection Authority administers the policy across South Australia.

Exposed aggregate creates a lot of washout, the cement-laden water rinsed off tools and surfaces, because the surface paste is hosed off within hours of the pour. A careful crew sets up a washout area on site, such as a lined pit or a bay with raised edges, and lets the solids set before disposal. Sandbags or a filter sock, a fabric tube that traps solids, across the gutter and over nearby side entry pits catch anything that escapes. Ask each concreter how they handle washout and cutting slurry, and expect a clear answer.

Washout and Slurry Checks on Pour Day

What is involved
A lined washout area set up on site before the first truck arrives.
Gutter and side entry pit protection in place before any washing or cutting starts.
Saw-cut slurry collected with a wet vacuum, not hosed toward the street.
Hardened washout solids taken away with the rest of the site waste.
Concrete waste in the gutter is a class 1 pollutant under the state water quality policy.

Sheds, Heritage Places and the 9 Cubic Metre Rule

Planning rules can reach a concrete job in ways that surprise owners, and the address decides most of them. Under the state's planning regulations, a small outbuilding can be exempt when its floor area is no more than 15 square metres and no part is higher than 2.5 metres. A larger shed or garage needs approval, and its slab is designed and approved as part of that building. Shed slab prices and footing details are covered in our guide to shed concrete slabs. Development applications go in online through PlanSA, and a slab drawing is usually lodged with the shed or garage plans.

Heritage listings affect digging and filling as well as buildings. Excavating or filling more than 9 cubic metres of land in a local heritage place, a property listed for its local heritage value, counts as development under Schedule 3 of the regulations. The same 9 cubic metre test applies on coastal land and in zones or areas that the Planning and Design Code, the state's main planning rulebook, identifies for that purpose. Nine cubic metres is less than it sounds, since digging out a 70 square metre driveway to 150 millimetres already passes it. Exemptions in Schedule 4, the list of minor work needing no approval, do not apply at all to a State heritage place, one on the SA Heritage Register, so any work there needs checking first. Retaining walls holding back no more than one metre of ground can be exempt, with exceptions for flood zones and land near the coast.

Situation Rule Source Effect on the Job
Outbuilding up to 15 m² and 2.5 m high Can be exempt Schedule 4, clause 4(1)(a) Slab can go ahead if every limit is met
Larger shed or garage Development approval Planning and Design Code assessment Slab designed within the approval
Earthworks over 9 m³ at a local heritage place Counts as development Schedule 3, clause 2 Approval before digging out
Any work at a State heritage place Schedule 4 exemptions do not apply Regulation 3C(3) Check every job first
Retaining wall up to 1 m Can be exempt Schedule 4, clause 4(1)(f) Flood and coastal exceptions
Crossover, kerb or footpath Council authorisation Local Government Act, section 221 Separate from planning approval

Pour Days, Neighbours and Construction Hours

Construction noise in Adelaide council areas is handled under the Local Nuisance and Litter Control Act 2016. The City of Adelaide and the City of Charles Sturt both give 7 am to 7 pm, Monday to Saturday, as the hours for construction noise. Concrete trucks, pumps, plate compactors that firm the base and power trowels, the motorised machines that smooth the surface, all fall within those hours. A crew wanting to pour earlier on a hot summer day needs an exemption from the council, applied for well ahead. The City of Adelaide asks for applications at least two weeks before an activity lasting under 24 hours, and four weeks for longer ones.

Dust from cutting and from dry ground counts as a nuisance as well. Council advice includes dampening dry topsoil, working when there is little wind and putting up barriers to contain dust. Let neighbours know the pour date, the expected truck movements and whether the footpath will be blocked for part of the day. If a garage slab is being replaced and its contents need storing, our guide to hiring a removalist in Adelaide covers moving and storage costs.

Exemptions are granted only where exceptional circumstances exist, so a crew cannot count on one for every summer pour. The City of Adelaide charges a $250 application fee for a Local Nuisance Exemption, its permission for noisy work outside the usual hours, a figure in force since 1 March 2025. Large slabs that take most of a day to place and finish need an early start inside the allowed hours. A concreter who plans the pour around those hours, and around the weather forecast, is less likely to rush the finishing. Ask how the crew will protect fresh concrete if the pour runs late or the weather turns.

Planning the Pour Day With the Street in Mind

What is involved
Pour times kept within 7 am to 7 pm, Monday to Saturday, unless an exemption is granted.
Neighbours told about the date, the truck movements and any footpath closure.
Dry ground dampened and cutting done wet so that dust stays on site.
Permits for the road, footpath and crossover in hand before the trucks are booked.
An exemption for early or late work has to be applied for weeks ahead, not on the morning of the pour.

Saw-Cutting, Grinding and Core Drilling Under the Silica Rules

SafeWork SA's crystalline silica rules, covering fine dust that can scar the lungs, in force since 1 September 2024, cover concrete and cement-based products as well as stone, bricks and pavers. Processing under those rules includes cutting, grinding, abrasive polishing and drilling, and also cleaning such as sweeping that lifts settled dust. A concreter saw-cutting control joints, grinding a floor for polishing or core drilling a hole for a pipe must use at least one listed control. The listed controls include wet dust suppression, on-tool extraction (a vacuum fitted to the tool) and local exhaust ventilation, fans that draw dust away at the source. Respiratory protection, such as a fitted dust mask, must be provided and worn if risk remains after those controls. Full details are published on the SafeWork SA website.

Grinding an existing slab for polished concrete can raise a lot of fine dust inside a home. Husqvarna makes floor grinders, power cutters and dust extractors for concrete work. Stihl makes cut-off machines and concrete saws used for cutting joints and openings. Hilti makes diamond core drills that bore neat round holes through slabs and walls for pipes and cables. High risk work needs a silica risk control plan, a written plan for keeping dust down, though a safe work method statement (SWMS) covering the same steps can replace it. Floor prices and the grinding process are explained on our polished concrete page.

Workers doing high risk processing must complete crystalline silica training, and course 10830NAT is one recognised option. Employers must also provide health monitoring, regular medical checks, for those workers, which include a chest X-ray and a respiratory function test. Training records must be kept for the period of work and for five years afterwards. A concreting business that grinds or cuts often should be able to show its plan and training records when asked.

Silica Controls You Should See on Site

What is involved
A water feed or a vacuum shroud on every saw cutting concrete.
Floor grinders connected to an extractor suited to the machine.
Slurry and dust cleaned up wet or with an industrial vacuum, never swept dry.
Respirators worn where dust remains after the other controls are in place.
Dry cutting or dry grinding of concrete at your home is a reason to pause the job and ring SafeWork SA.

Sorting Out Cracks, Ponding and Other Concrete Faults

Faults in new concrete usually show within the first months, when water ponds, or sits in puddles, on a driveway, a slab cracks away from its joints or exposed stones come loose. Put the complaint to the business in writing, attaching dated photos, the quote and the contract. Consumer and Business Services takes building disputes through an advice form, and an officer reviews each one and makes contact. If direct contact has failed, CBS decides whether conciliation, where an officer helps both sides reach agreement, suits the dispute, and voluntary conciliation is generally held by phone. Formal legal action runs through the courts, and CBS can be reached on 131 882 before any claim is heard.

Some cracking in concrete is normal, and a fine crack along a control joint shows the joint is doing its job. Wide cracks, edges lifting near trees or a slab sinking at one corner point to a base, drainage or ground problem worth having assessed. Ardex makes concrete repair mortars for patching damaged edges and flaking surfaces. Dincel makes permanent formwork, plastic wall panels filled with concrete that stay in place, which can be used when a failed retaining wall is rebuilt. Typical repair prices sit on our concrete repairs and crack filling page.

Treat a leaning retaining wall or a slab that drops suddenly as a safety issue first and a dispute second. Keep people away from it and have a structural engineer assess it before anyone digs nearby or adds load. Damage to a buried pipe or cable during excavation should be reported to its owner, such as SA Water or SA Power Networks, straight away. Keep every report, photo and message, because they become evidence if the matter later reaches conciliation or court.

Missing Lines and Warning Signs in Adelaide Concrete Quotes

Gaps matter more than totals, since a low price often comes from items that were simply never priced. A driveway quote should state the area, the thickness, the concrete strength, the mesh, the base material and the finish. It should also say who removes the old surface, who applies for the crossover authorisation and who pays the council fee. Control joints, sealing and any stormwater work should be included or clearly excluded. Pump hire and short-load fees belong on separate lines if the concreter expects to charge them. A rate per square metre with no thickness or strength stated cannot be compared with anything else.

Some features of a quote should make you stop and check. A crossover priced with no mention of council authorisation suggests a step being skipped or left for you to arrange. Deposits above $1,000 on a job priced under $20,000 are more than the Act allows. A quote with no licence number gives you nothing to check on the register. Talk of washing out into the street or cutting dry to save time points to a crew ignoring rules that protect your household.

Items Every Adelaide Concrete Quote Should Show

What is involved
Area, thickness, strength in MPa, mesh type and base material for each slab.
Finish, sealer and control joint spacing named in writing.
Removal of the old surface and the tip fees on a separate line.
Who obtains the crossover authorisation and any road or footpath permit.
Stormwater work included or clearly excluded, with who installs the pipes.
The licence number of the business that will sign the contract.

A crossover priced without any mention of council authorisation.

A deposit above $1,000 on a contract under $20,000.

When one Adelaide concrete price sits well under the rest, look for missing removal, permits, drainage or pump costs.

Getting Adelaide Concrete Quotes on the Same Footing

Quotes can only be compared fairly when every concreter has priced an identical description of the work. Give each one the area with rough measurements, the finish, the access width and the position of trees, poles and pits near the crossover. Name your council, since crossover specifications differ between Unley, Burnside, Port Adelaide Enfield and the other metropolitan councils. If a soil report or engineering drawings exist for a slab, send them so every concreter prices the same thickness and mesh. Three written quotes give a useful spread for most concrete work.

Find out from each concreter how many weeks the price stays valid, the likely start date and what weather would delay the pour. A staged quote helps when the driveway, crossover and paths can be done at different times. Find out whether the concreter breaks out the old slab or brings in a contractor, as explained on our concrete demolition page. Before a path is poured hard against the house, ask whether it will cover a termite barrier or the inspection zone, the strip of wall left clear so termite tracks show. Termite inspections and barriers are explained in our guide to hiring a pest controller in Adelaide. Adbri makes cement and other construction materials, and the docket for each load names the mix that was supplied.

Keep the quote, contract, permits, delivery dockets and any engineering certificates together after the job. Each docket records the concrete grade and the time of delivery, which matters if the strength is ever questioned. Photos of the mesh and the base taken before the pour show what is now hidden under the slab. Any council sign-off for the crossover belongs in the same file, ready for a future sale of the house.

Concreters Across Adelaide

Concreting prices on this page apply across Adelaide. Jobs close to the main centres rarely carry a travel charge, while outer suburbs and fringe areas sometimes do, and crossover rules change with each council.

▶ Inner Adelaide & CBD 10 areas
Adelaide CBD North Adelaide Prospect Walkerville Medindie Kent Town Unley Parkside Hyde Park Thebarton
▶ Eastern Suburbs 10 areas
Norwood Kensington Burnside Glenside Magill Campbelltown Payneham St Peters Rostrevor Athelstone
▶ Southern Suburbs 10 areas
Mitcham Goodwood Blackwood Marion Happy Valley Morphett Vale Noarlunga Centre Hallett Cove Seaford Aldinga Beach
▶ Western Suburbs & Beaches 10 areas
Glenelg Brighton Plympton Henley Beach Grange Findon Woodville West Lakes Port Adelaide Semaphore
▶ Northern Suburbs 10 areas
Enfield Para Hills Modbury Tea Tree Gully Golden Grove Mawson Lakes Salisbury Paralowie Elizabeth Munno Para

Adelaide Concreter FAQ

Who gives permission for a new crossover outside my Adelaide home?
Your local council does, because the crossover sits on council land between your boundary and the road. Adelaide councils authorise the work under section 221 of the Local Government Act 1999. Port Adelaide Enfield, for example, charges a $35 application fee and takes about seven working days to process it. The application needs a plan showing the width of the crossover and its distance from trees, poles and pits. Ask your concreter whether the quote covers preparing and lodging it.
How far must a crossover sit from a street tree or stobie pole?
It depends on the council, so check your own council's specification before the layout is fixed. Unley sets 1.5 metres from the trunk of a street tree up to 300 millimetres in diameter. Larger trees in Unley need advice from the council's arborist before any approval. Both Unley and Burnside ask for a one metre clearance to stobie poles. Burnside sets the distance from existing street trees according to the species and size of each tree.
Can the concrete pump stand on a City of Adelaide street during my pour?
Yes, provided a City Works permit is in place for the work on the road or footpath. The council publishes a guide for concrete pumps and pours, and applications are due at least five business days ahead. The fee for concrete pours is $1.85 per square metre per day, with a $32 minimum. A daily cap of $430 applies to each application. Your quote should say whether the concreter arranges and pays for this permit.
Can leftover concrete be hosed into the gutter after the pour?
No, because concrete waste is a class 1 pollutant under the Environment Protection (Water Quality) Policy 2015. The policy lists concrete cutting wastewater and building washwater in the same class. Water within a public stormwater system counts as waters, so the street gutter is covered. Crews should use a lined washout area and protect the gutter and nearby pits. Ask how washout will be handled before you accept a quote.
What hours can a concrete crew work in a residential street?
The City of Adelaide and Charles Sturt councils give 7 am to 7 pm, Monday to Saturday, as the hours for construction noise. These limits sit under the Local Nuisance and Litter Control Act 2016. Work outside those hours needs an exemption from the council. The City of Adelaide asks for applications at least two weeks before an activity lasting less than 24 hours. Longer activities need at least four weeks of notice.
Does a business that only pours driveways need a CBS licence?
Yes, because the Building Work Contractors Act defines a building to include a wall or structure. A driveway is a structure, and paving is also named as building work in the current regulations. Any business operating as a building work contractor needs a licence, including subcontractors. No dollar value is set below which the licence is not needed. Check the name, number and conditions on the Consumer and Business Services register.
Does a $22,000 driveway contract need building indemnity insurance?
Only if the work also needs development approval, because insurance applies to contracts of $20,000 or more that need approval. Whether a driveway needs approval depends on the address, any heritage listing and the work involved. Your council can confirm that before you sign anything. Either way, the deposit on a $22,000 contract is capped at 5 per cent of the price. A slab for an approved garage or extension at that price would need the insurance.
Can I pour a slab for a small garden shed without approval?
A small outbuilding can be exempt when its floor area is no more than 15 square metres. No part of it can stand higher than 2.5 metres above the natural ground. It also cannot sit in front of the building line, the front wall of the house, and the exemption does not apply at a local heritage place. Larger sheds and garages need approval, and the slab forms part of that application. Check the remaining siting limits with your council before ordering concrete.
What should a crew do about dust when grinding or cutting my slab?
SafeWork SA's silica rules cover concrete, and they apply to cutting, grinding, polishing and drilling. The crew must use at least one listed control, such as wet cutting or a vacuum fitted to the tool. Respiratory protection is required if risk remains after those controls are in place. Sweeping that lifts settled dust is also treated as processing under the rules. Keep children and pets inside with the windows shut while the work is done.
Can the footpath section of my new crossover be exposed aggregate?
That depends on the council, because the footpath and verge are council land. Unley asks for footpath sections across a crossover to be paved to match the existing footpath pavers. Burnside allows colour to be added but requires the surfacing type and colour to be approved. Ask your own council in writing before the concrete is ordered. Where Burnside has to reinstate its land, it charges the owner under section 213 of the Local Government Act 1999.

Adelaide Concreting Specialists

For Trades & Contractors - SA

Concreting in Adelaide can rely on other trades for the parts a concreter cannot do. Stormwater pipes and kerb outlets need a licensed plumber, bulk digging may go to an excavation contractor, and old slabs may be broken out by a demolition crew. These services can be booked alongside a concrete job across the metropolitan area.

Compare Adelaide Concreting Quotes

Tell us your suburb, the area to be concreted, the finish you want and how close a truck can park, and compare quotes from local Adelaide concreters all pricing the same job.

Get Free Concreting Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All SA tradies are required to hold appropriate licences. Verify at Consumer and Business Services SA.
Prices are 2027 estimates based on typical Adelaide concreting rates. Your final price will depend on the site, access, removal of old concrete and the finish chosen, so compare written quotes that list concrete, labour, pump hire and council fees separately.
Need work done? Get free quotes. Post a Job – It's Free