Buying a Home in WA?

Tell us the suburb, the age of the home and the last day of your inspection period, and we will connect you with licensed WA plumbers for quotes.

Get Free Plumber Quotes

Typical Costs (2027 Estimates)

Call-out and first hour$140-$280
Plumber hourly rate (normal hours)$110-$165/hr
Drain camera inspection with report$280-$520
Acoustic leak detection$250-$450
Multi-method leak survey$450-$850
Hot water diagnostic visit$90-$200
Whole-house plumbing inspectionPriced on quote

These figures are 2027 estimates for homes across WA. Repairs found on the day, regional travel and full inspections are quoted per job.

Pre-Purchase Plumbing Inspection Services WA - Get Local Quotes

A pre-purchase plumbing inspection is a visit by a licensed plumber to test the pipes, drains, fixtures and hot water of a home you plan to buy in Western Australia. WA has no required cooling-off period for home purchases, so your protection comes from an inspection condition written into the offer and acceptance, the WA contract of sale, before you sign it. The plumber runs each tap, flushes every toilet, reads the water meter for hidden leaks and records the age and condition of the hot water unit. Sewer and stormwater pipes can be filmed with a drain camera to find tree roots, cracked joints and sunken sections before they become your cost. The visit also checks the overflow relief gully, the grated fitting outside that lets a blocked sewer spill outdoors and not inside. Homes built or renovated from mid-2017 to mid-2022 may also have grey Typlex polybutylene plastic pipes, which Building and Energy has linked to leaks. Older homes with clay drains, asbestos cement pipes or a renovated bathroom without paperwork are worth a plumber's report. Regional buyers can add checks of septic systems, bores and rainwater tanks. Prices here are 2027 estimates for WA, with a drain camera inspection and report at $280 to $520 and a call-out with the first hour at $140 to $280. Whole-house inspections have no published band, so plumbers price them on quote from the size, age and location of the home. Book early in your inspection period, because the report and any repair quotes need to arrive before that period ends.

Plumbing Checks for Home Buyers Across WA

Licensed plumbers inspect houses, units and rural properties for buyers in Perth, Mandurah and Peel, the South West, the Perth Hills, the Wheatbelt and the Great Southern. Share your inspection deadline and we can connect you with up to three local plumbers whose quotes you can compare.

Get Free Quotes

At a Glance - Pre-Purchase Plumbing Checks in WA (2027 Estimates)

Check 2027 Estimate (WA) Best For Who Does It What You Receive
Whole-house plumbing inspection Priced on quote Homes built before 1990 and renovated bathrooms Licensed plumber Written report with photos
Drain camera inspection with report $280-$520 Clay sewers, trees and slow drains Licensed plumber Recording with fault distances
Basic acoustic leak detection $250-$450 A meter that keeps moving Licensed plumber Likely leak position
Slab leak detection $550-$1,200 Warm or damp patches on concrete floors Licensed plumber Leak position under the slab
Hot water diagnostic visit $90-$200 Units of unknown age Licensed plumber or gas fitter Condition and model notes
Call-out and first hour $140-$280 Short visits for one or two checks Licensed plumber Findings on the day

Cost Depth: Budgeting for a WA Plumbing Check

No WA price guide on Quote Yard gives a single figure for a whole-house plumbing inspection, so each plumber prices it on quote. Quotes start from the call-out with the first hour at $140 to $280, plus extra time at $110 to $165 an hour. Filming the sewer with a camera and supplying a report adds $280 to $520.

Leak testing is the main optional extra. Basic acoustic detection costs $250 to $450, a standard survey using several methods costs $450 to $850 and slab leak detection, for pipes under a concrete floor, costs $550 to $1,200.

All figures here are 2027 estimates for WA. Repairs found during the inspection are quoted separately.

What a Plumber Looks at in a WA Home Before Purchase

A pre-purchase plumbing inspection is a paid visit by a licensed plumber to test how the plumbing of a home performs before you commit to buying it. The plumber turns on each tap, fills and flushes every toilet, runs the showers and watches how quickly each fixture drains away. Exposed pipes under sinks, in the laundry, beside the hot water unit and at the meter are checked for corrosion, joints that seep water and poor repairs. The visit finishes with a written report listing what was tested, what was found and which parts of the system could not be reached.

Western Australian homes bring their own mix of plumbing questions for a buyer. Newer homes connected to the Water Corporation sewer tend to have PVC (rigid plastic) drains, while older homes may still have clay or asbestos cement lines. Stormwater from roofs may be piped to soakwells, which are buried tanks with open sides that let rainwater soak into the sand. Regional blocks add septic tanks, rainwater tanks and garden bores, each with its own equipment to check. Local plumbers will know which of these to expect at the address you are buying.

Area What the Plumber Does Warning Signs Likely Next Step
Water meter 15 minute reading with taps off Red numbers keep moving Leak detection
Sewer line Camera from the inspection shaft Roots, sand, offset joints Clearing or relining quote
Overflow relief gully Checks height and grate Buried or covered grate Raise or clear around it
Hot water unit Reads label, checks valve and tank Rust, drips, scorching Repair or replacement quote
Toilets Repeated flushing Water trickling into the bowl Cistern valve repair
Showers Runs water, checks tiles and walls Drummy tiles, swollen skirting Leak repair or regrout
Water pipes Looks at exposed sections Grey Typlex markings, corrosion Builder contact or pipe quote

The inspection is a snapshot of the home on one day, and it cannot promise that nothing will fail after you move in. Pipes cast into concrete floors, hidden inside brick walls or buried under paving are judged from indirect signs such as damp patches, meter movement and slow drains. Lifting a cover, removing a panel or opening a cupboard full of stored belongings also needs the seller's permission. Every area that could not be seen should appear in the report, so you know exactly which parts of the plumbing were left unchecked.

WA Prices for Pre-Purchase Plumbing Checks (2027 Estimates)

None of Quote Yard's WA plumbing price guides lists a single figure for a whole-house pre-purchase plumbing inspection, so plumbers price the visit on quote. Quotes are built from a call-out with the first hour on site, priced at $140 to $280, and further time at $110 to $165 an hour in normal hours. Filming the drains adds a camera inspection with a written report, which costs $280 to $520 across WA. All figures in this guide are 2027 estimates, and the plumber may adjust the price after hearing the size, age and location of the home. Repairs found during the inspection are always quoted separately.

Check or Repair 2027 Estimate (WA) What Changes the Price
Whole-house pre-purchase plumbing inspection Priced on quote Home size, bathrooms, report detail
Call-out and first hour on site $140-$280 Travel and time of day
Extra labour, normal hours $110-$165/hr Time needed on site
Drain camera inspection with report $280-$520 Length of line and access points
Basic acoustic leak detection $250-$450 Area searched
Standard multi-method leak survey $450-$850 Methods used
Slab leak detection $550-$1,200 Floor area and pipe layout
Hot water diagnostic visit $90-$200 System type and access
After hours or weekend call-out $240-$520 Night, Sunday or public holiday

Using those price ranges, a typical two-hour visit with drain filming adds up as follows. The call-out and first hour of $140 to $280, plus one more hour at $110 to $165, comes to $250 to $445 for labour. Adding the camera inspection and report at $280 to $520 brings the total to $530 to $965 before any travel charge. Some plumbers offer a fixed inspection fee instead, so compare the full price for the same list of checks and not just the hourly rate. After-hours rates and the cost of everyday repairs are listed in more detail in our WA plumber pricing guide.

Travel can change the figure for homes outside the main towns. Plumbers based in Perth may add a travel charge for the Perth Hills, the Wheatbelt or the South West, and some regional plumbers charge by the kilometre. Buyers near Bunbury or Busselton can avoid the long drive by choosing a plumber from the Bunbury and South West area. Have each plumber show travel as its own line, so you can see what the inspection itself costs.

Inspection Conditions in a WA Offer and Acceptance

Your offer decides your inspection rights in Western Australia, because there is no requirement for a cooling-off period on a home purchase. Once the seller signs your offer and acceptance, the written contract of sale used in WA, you are bound by its terms. Your chance to back out because of a plumbing problem therefore depends on the conditions you wrote into that offer before signing. Consumer Protection WA suggests that buyers consider conditions for building and termite inspections. Naming a plumbing inspection in a condition, or a building inspection that includes plumbing, makes the plumber's report part of your decision. Without such a condition, a plumbing fault found after signing gives you no simple way out of the contract.

The exact wording of a condition matters, and Consumer Protection notes that a lawyer could advise on wording that protects your interests. Clear conditions name the type of inspection, the person who will carry it out, the number of days allowed and what happens if the report is unsatisfactory. Your terms also need to be acceptable to the seller, who can reject or counter an offer with conditions attached. Settlement agents, the licensed professionals who handle property transfers in WA, can explain how the general conditions booklet, the standard terms that come with the contract, treats inspection reports. Write down the final day of the inspection period as soon as the offer is accepted.

WA Buyer Timing at a Glance

Western Australia has no required cooling-off period for home purchases, so protection comes from the conditions written into the offer and acceptance. Consumer Protection WA suggests buyers consider building and termite inspection conditions, and the buyer hires and pays the inspector.

A plumbing inspection can be named in its own condition or included in the building inspection condition. The number of days allowed and the steps after an unsatisfactory report should be clear before the offer is signed.

This is general information about WA buying practice. A settlement agent or lawyer can advise on the wording for your purchase.

Under Consumer Protection guidance, the buyer is responsible for hiring and paying a qualified person to carry out a building inspection. The same applies to a plumber, who works for you and not for the seller or the selling agent. Sellers may offer a report already prepared, but that report was commissioned in the seller's interest and may not cover what concerns you. Your own plumber can follow up issues raised in the building report and test the items you care about most. Keep copies of every report with your contract papers.

Booking the plumber on the first or second day of the inspection period leaves time for the next steps. The report needs to reach you, any serious fault needs a repair quote and your settlement agent may need to send a notice to the seller. Arrange access through the selling agent at a time when the water and power are connected and the home is not hosting an open day. Check with the plumber how long the visit needs, especially if the drains are being filmed.

Where a Building Report Stops and a Plumber Starts

Building inspectors look at the structure and general condition of the home, including cracking, roof damage, damp and unsafe renovations. Their written report should list faults, according to Consumer Protection, whether they can be repaired and any unsafe renovation work. They may note visible defects such as a dripping tap or water staining, but the inspection is a check of condition and not a test of the plumbing in use. Plumbers add the tests that need trade knowledge, such as reading pressure, timing drainage and filming the pipes underground. Book a building inspection in WA first or on the same day, then hand the plumber a copy. Read the building inspector's terms to see which plumbing items, if any, the report includes.

Pest inspections are separate again, and Consumer Protection says they should follow the national standard for timber pest inspections, AS 4349.3. Share any damp areas the plumber finds with the pest inspector, who can then look more closely at nearby timber. Arranging a pre-purchase pest inspection in the same week keeps every report inside your inspection period. When reports overlap, check that each one names the same rooms and the same damp areas.

Some homes justify a plumber's visit more than others. Houses built before 1990, homes with large trees close to the sewer and homes with a hot water unit of unknown age are clear candidates. Recently renovated bathrooms deserve a closer look, especially where the seller cannot produce paperwork for the work. Homes built or renovated between mid-2017 and mid-2022 may contain a type of water pipe linked to leaks in WA homes, covered further down this page. Apartments and newer homes with modern pipework may need only a targeted check of the hot water unit and fixtures.

Your Sewer Up to the Property Connection

Knowing where your responsibility ends helps you understand why drain faults matter to a buyer. The Water Corporation says sewer blockages within the property plumbing are the owner's responsibility, while a blockage in the sewer main, the public pipe that serves the street, is its own. Its diagram places the property sewer, the inspection shaft and the property connection on the owner's side, with the sewer junction, where your pipe joins the public main, on the Water Corporation's side. The property connection is the final short section of pipe that joins your drains to the public sewer. Under its guidance, the owner also pays to clear any blockage within that connection. Any cracked or root-filled pipe along that private section becomes the new owner's repair bill after settlement.

Inspection shafts are capped vertical pipes that let a plumber reach the sewer for clearing and camera work. Your plumber will look for one near the boundary or along the line of the sewer, and note whether it is buried, cracked or covered by paving. The overflow relief gully, known as the ORG, is the grated fitting outside the house that lets sewage spill outdoors if the drain blocks. It should sit clear of garden beds and paving so that a blockage overflows outside and not through a shower or a floor waste, the drain grate in a bathroom or laundry floor. Any gully grate that has been buried, raised or covered is a fault for the report.

Owners are asked to call the Water Corporation on 13 13 75 straight away if wastewater is overflowing or causing damage, and that line is open at all hours. If the fault turns out to be in its sewer, the plumber contacts the Water Corporation, which pays the plumber a standard fee for locating the blockage. Faults on the private side remain the owner's cost, which is why a buyer wants to know their condition before settlement. Recurring blockages mentioned by the seller or neighbours can also be raised in your offer conditions.

Drainage Plumbing Diagrams From Building and Energy

Drainage plumbing diagrams are drawings that show the layout of the drains on a property. Building and Energy, the WA regulator for building and plumbing work, says these diagrams are used by homeowners, licensed plumbing contractors and others. They help locate pipes before digging, plan new connections and find access points for clearing a blocked drain. Diagrams can be bought for a fee through the drainage plumbing diagram search run by the State Government. The regulator does not publish the fee on its homeowner page, so check the amount when you place the order.

Ordering the diagram before the inspection lets the plumber compare the drawing with what the camera shows. Extensions, granny flats and later bathrooms may not match the diagram, which may mean some work was never recorded. The diagram also shows roughly where the sewer runs in relation to trees, pools and paving you may want to change later. Records for older homes may be limited, so a missing or incomplete diagram is not unusual and the camera footage becomes more important. Keep the diagram with the inspection report for future owners and plumbers. Where the camera finds a fault, the diagram helps the plumber show where it sits in relation to the house.

Filming the Sewer and Stormwater Lines

Drain cameras are small waterproof cameras on a flexible rod, pushed along the pipe from an access point. The footage shows tree roots, cracked joints, joints that have shifted out of line, sagging sections that hold water and pipes that have partly collapsed. Milwaukee makes inspection cameras in its plumbing tool range, and a camera with a recording screen lets you watch the footage live. Request the recording and a distance reading for each fault, so a later quote can be matched to the right point on the line. The camera inspection with a report costs $280 to $520 in WA, based on 2027 estimates.

Clay sewer pipes in older homes were laid in short lengths, and tree roots can work their way in at the joints. PVC drains in newer homes resist roots better, but they can still crack where ground has settled or a builder disturbed the line. Vinidex makes PVC pipe systems for drainage, waste and vent work, known as DWV, and for stormwater, and plumbers will name the material they see. The fixes a plumber might recommend are compared in our guide to pipe relining and drain repairs.

Stormwater pipes and soakwells deserve a look where the home has a history of overflowing gutters or water pooling against walls. Lifting the lid of an accessible soakwell shows how much sand, silt and leaf litter has built up inside. Pipes that run from downpipes to the soakwells can be filmed in the same way as the sewer. Clearing a stormwater line or soakwell costs $240 to $600, and that work can be planned for after settlement where flooding is not a risk. The report should also say whether stormwater is connected to the sewer, because the two systems should stay separate. Gutters and downpipes that spill into garden beds against the walls should also be photographed for the report.

The camera footage shows whether a repair is likely to be small or large. One cracked joint might be fixed with a short patch liner, a sleeve set inside the pipe over the crack, at $1,250 to $2,800. Relining, which sets a new liner inside the old pipe, costs $600 to $1,150 per metre for longer sections. Digging up and replacing the pipe costs $250 to $560 per metre before paving or lawn is put back. These figures help you judge whether a fault is something to negotiate on price or a reason not to buy.

Meter, Service Pipe and Water Pressure

The Water Corporation says the meter is usually in the front garden close to the road, and it describes a simple leak test that the plumber can run with the seller's permission. All taps and water-using appliances are turned off, the three red numbers on the meter are written down, and the meter is read again after 15 minutes. Any movement means water is escaping somewhere on the property, which calls for a closer look before you buy. Owners are also responsible for keeping the area around the meter clear, according to the Water Corporation.

In Bunbury, drinking water comes from Aqwest, which supplies more than 18,000 properties in the city and nearby areas. Around Busselton, Busselton Water is the supplier, and a buyer there should check which authority bills the property. The meter test works the same way wherever the home is, and it gives you a quick answer on whether a hidden leak exists. If the meter moves, the next step is a water leak detection visit to find the source. Basic acoustic leak detection, which listens for escaping water with sensitive microphones, costs $250 to $450.

Water pressure is read with a gauge screwed onto an outside tap. Very high pressure strains taps, flexible hoses and hot water valves, while low pressure may come from a corroded pipe or a partly closed valve. On rural blocks with rainwater tanks, a pump provides the pressure, and Onga makes pressure pumps and pressure tanks used for this purpose. Listening to how frequently the pump starts also helps, since a pump that keeps switching on and off with every tap closed may be feeding a leak. Record the location of the main stop valve, the tap that shuts off water to the whole home, while the plumber is there, since you will need it on your first day as owner. Take the pressure reading with no other taps running, so the figure reflects the supply alone.

Galvanised steel water pipes, still found in some older homes, rust from the inside and slowly reduce flow. Copper pipes last well but can develop pinhole leaks, and plastic pipes vary widely in age and quality. Reliance Worldwide Corporation makes SharkBite push-fit fittings, which join pipes without soldering, and the plumber may note these where earlier repairs were made. Mixed materials and repair fittings along one line can suggest a pipe nearing the end of its life. Replacement options are set out in our guide to water pipe replacement services.

Homes Built From Mid-2017 to Mid-2022: Typlex Pipes

Building and Energy has reported failures of Pro-fit polybutylene water pipes, a type of plastic pipe, made from Typlex 1050 resin by Iplex Australia. Affected homes were built or renovated from about mid-2017 to mid-2022, although not every home from that period has these pipes. The pipes are grey and marked with the words Iplex and Typlex. If you cannot see the markings, the builder can confirm the brand of the water piping, or the local government can provide the building permit and plans.

An industry response, agreed between the manufacturer, several builders and the State Government, now handles repairs for affected homes. Owners are told to contact their builder first if a leak occurs, and the response sets out staged repairs, with re-piping that grows after each further failure. Owners do not have to pay for the staged programme, and complaints can be lodged with Building and Energy up to 15 years after practical completion, the point when the builder finished the home. Owners can also register with the manufacturer for a free leak detection unit through the industry response website, even without a failure. Check the current details on the WA Government website, which carries the latest updates.

This issue is important for buyers because a settlement between the builder and a previous owner may affect later complaints. The regulator warns that such a settlement may prevent a building services complaint and that future owners may also be affected. It strongly encourages people thinking of buying to carry out due diligence, meaning careful checks before they commit. Put questions to the seller in writing about whether Typlex pipes are present, whether any leaks or repairs have occurred and whether any settlement was reached with the builder. Your settlement agent or lawyer can advise on how to make the answers part of the contract. Keep the seller's written answers with the plumber's report and your contract papers.

Typlex Pipe Facts for Buyers

Building and Energy links leaks in WA homes to Pro-fit polybutylene pipes made from Typlex 1050 resin. Affected homes were built or renovated from about mid-2017 to mid-2022, and the pipes are grey with Iplex and Typlex printed on them.

Building and Energy says a settlement between a previous owner and the builder may prevent a later complaint, and it strongly encourages prospective purchasers to carry out due diligence. Owners of Typlex homes can register for a free leak detection unit through the industry response.

Details are from the WA Government page on polybutylene plumbing failures, last updated 14 January 2025. Check it for current information before relying on these points.

Hot Water Units: Age, Valves and Fuel

Hot water units in WA homes include electric storage tanks, gas storage tanks, gas continuous flow units, rooftop solar and heat pumps. Your plumber reads the label on the unit to record the brand, model and any date code, and looks for rust at the base, leaks and scorching around gas burners. Thermann makes small and large electric storage units and gas storage units, and Rinnai makes gas continuous flow units that heat water as it passes through. Apricus makes solar systems with evacuated tube collectors, which are rows of glass tubes on the roof that absorb heat. Reclaim Energy makes heat pump hot water systems, including models that use CO2 (carbon dioxide) to carry heat.

Every storage unit has a pressure and temperature relief valve, called a PTR or TPR valve, which releases water if pressure or heat climbs too high. Reliance Worldwide Corporation makes RMC pressure and temperature relief valves, and a plumber will check that the valve and its drain line are in good order. Constant dripping from the drain line can be a sign of high pressure in the water supply or a worn valve, and replacing a pressure valve costs $180 to $390. Bathrooms may also have a tempering valve or a thermostatic mixing valve, which blends hot and cold water before it reaches the taps. Enware makes thermostatic mixing valves, and the plumber can note whether such a valve is fitted and accessible. The relief valve's drain line should end at a safe outlet where escaping hot water cannot scald anyone.

Electric storage units with a sound tank may only need a new heating element and thermostat, the part that controls temperature, at $280 to $630. Replacing a sacrificial anode, the metal rod that protects the tank from corrosion, costs $250 to $480. Replacing an electric storage unit with the same type costs $1,450 to $2,600, and a gas storage or continuous flow unit costs $2,000 to $3,600. On its own, a diagnostic visit for a hot water system costs $90 to $200. Common faults and repair options are explained further on our hot water system repairs page.

Bathrooms, Toilets and Hidden Leaks

Toilets are checked by flushing each one several times and watching the bowl for a slow trickle that continues after the cistern, the tank that holds the flush water, fills. Cisterns that keep running waste water and may need a new inlet or outlet valve, which costs $170 to $410 to repair. Fienza makes back to wall and wall hung toilet suites, and Geberit makes Duofix concealed cisterns that sit inside the wall behind a flush button. With an in-wall cistern, the plumber can only judge its condition from the bowl and the flush button unless an access panel can be opened. Slow clearing or gurgling after a flush can mean a partial blockage, and the usual fixes are explained in our guide to blocked toilet repair services.

Showers deserve close attention because leaks there can damage walls and floors for years before they show. Signs include loose or drummy tiles, which sound hollow when tapped, cracked grout, swollen skirting boards and paint bubbling on the other side of the wall. Running the shower for several minutes lets the plumber look for water escaping beyond the screen or around the floor waste. Methven makes showers and tapware, and the plumber may note the brand of mixers fitted, since parts vary between makers. Suspected shower leaks are a job for shower regrouting and leak repairs or a waterproofing specialist after settlement. Moisture meters, which measure damp inside a wall, or a thermal camera, which shows cooler wet areas, can help confirm a hidden leak.

Kitchens and laundries are checked under the sink for leaking connections and for water stains on cupboard bases. Flexible hoses connect taps to the water pipes, and the plumber will flag any hose with rusted or frayed braiding for replacement. The laundry sink, washing machine taps and floor waste should drain freely without gurgling. Dishwasher and fridge water connections should each have an isolation valve, a small tap that shuts off water to that appliance, and each valve should turn freely. Any leak the plumber finds in these areas is recorded with a photo and a rough repair cost.

Gas Appliances, Flues and the Notice of Completion

Homes may run gas cooktops, hot water units and heaters on natural gas from the street network or on bottled gas from cylinders. The State Government says only a licensed gas fitter should install, repair or relocate gas appliances. After gas work, the responsible gas fitter must give the owner and the gas supplier a Notice of Completion, the form recording that work, within 48 hours. These notices are worth requesting from the seller, because they show that past gas work was done by a licensed person. Plumbers who also hold a gas fitting licence can check visible gas lines and appliance condition during the inspection.

Gas appliances should be serviced by a licensed gas fitter as the maker recommends, or at least every two years, and every year once they are more than 10 years old. Carbon monoxide, an invisible and odourless gas, can spill from a poorly maintained heater or a blocked flue, the pipe that carries fumes outside, so service records matter for older units. Servicing or repairing a gas appliance costs $160 to $450, based on 2027 estimates. If you smell gas during the inspection, the State Government advice is to turn off the gas at the meter or cylinder, remove anything that could light it and open doors and windows. Report gas safety problems to Building and Energy on 1800 678 198 at any hour, and find repair help on our gas fitting page. Service stickers or invoices from past visits show when each appliance was last checked.

Asbestos Cement and Older Pipework

The Department of Health says homes built before 1990 likely contain asbestos in some building products. Its list includes wall and ceiling sheets, roof sheeting, gutters, downpipes, fences and insulation around hot water pipes. Asbestos cement sewer or stormwater pipes may also be present, which look like grey fibrous pipe and cannot be confirmed by eye alone. The Department of Health recommends testing suspected materials through a laboratory accredited by NATA, the national testing authority. It also notes that buyers can ask for asbestos products to be included in a building inspection report.

Asbestos cement in good condition is generally safe if left undisturbed, but cutting, drilling or breaking it can release fibres. WorkSafe says unlicensed removal is permitted for areas under 10 square metres, but it advises against doing the work yourself because of the health risks. For any planned drain repair through asbestos pipe, ask the plumber how the material will be handled and who will remove it. Sampling and reports are covered on our page about asbestos testing and inspection.

Certificates of Compliance and Unrecorded Work

Major plumbing work in WA, such as new fixtures, new drainage or a replacement water heater, must be done by a licensed plumbing contractor. Before starting, the contractor lodges a notice of intention, a form telling the regulator that the work is about to start, at least 24 hours ahead, except in an emergency. Within five working days of finishing, the contractor must give the owner a certificate of compliance, the document confirming the work meets the required standards. The regulator describes the certificate as the owner's six-year guarantee that the work has been completed. Request certificates from the seller covering any bathroom renovation, extension or new hot water unit. Copies also help the next plumber understand what was installed and when.

Minor plumbing work is the testing, maintenance, repair or replacement of existing water supply plumbing, where a part is swapped for one of the same type. Homeowners may maintain a shower head, repair a tap other than a thermostatic mixing tap and replace a cistern washer. They may also replace a water filter cartridge and plunge a blocked fixture. Everything else needs a licensed plumber or permit holder, including new pipes, moved fixtures and drainage changes. Any rebuilt bathroom without a certificate may have been done by an unlicensed person. Plumbers can point out signs of amateur work, such as unsupported pipes, incorrect fittings and drains laid with too little slope.

Missing paperwork does not always mean the work is faulty, but it removes your easy path to a complaint. Plumbing complaints can be lodged with Building and Energy for work completed within the last six years, after first trying to resolve the problem with the contractor. That path depends on knowing which contractor did the work, which is why certificates are useful to a new owner. Contract disputes, such as money owed, go to Consumer Protection on 1300 304 054. Check with your settlement agent whether any unapproved work should be addressed in the contract before you sign.

Smoke Alarms and RCDs the Seller Must Fit

Two electrical safety duties fall on the seller in WA, and a plumbing inspection is a good moment to check them. Homes must have compliant smoke alarms before ownership is transferred, which means mains powered alarms in working order that are no more than 10 years old. Two or more RCDs, the safety switches that cut power when electricity leaks to the ground, must also be fitted before the title transfers. Only a licensed electrical contractor can connect mains smoke alarms or install RCDs. Booking an electrical safety inspection confirms both duties have been met. Raise any missing alarms or safety switches with the selling agent before settlement.

Plumbers do not test electrical work, but they can see when water and electricity meet in risky ways. Leaks near power points, a hot water unit with damaged wiring covers or a pump with exposed cables all belong in the report. These observations go to the electrician, who decides whether repairs are needed. Buyers planning to demolish the home can give the seller a statutory declaration, a signed legal statement, under the smoke alarm rules. If demolition does not happen within six months, the new owner must then install the required alarms.

Buying a Strata Lot

Strata buyers in WA receive compulsory upfront information about the scheme (the whole strata complex) and the lot (the part you would own), and Landgate advises reviewing it all before signing. That information can show planned works, how the scheme is run and the strata company's finances, the strata company being the body of all owners that manages common property. Find out whether the scheme has recorded leaks between units, failed hot water units or blocked shared drains. The inspection can then focus on the parts inside your lot and any visible shared pipes in the ceiling or service cupboards.

Responsibility for pipes in a strata scheme depends on the scheme plan, the survey drawing of lot boundaries, and the by-laws, so never assume a shared pipe is the strata company's cost. By-laws are the rules a strata scheme adopts for how owners use and look after the property. Read them with your settlement agent, especially where the unit has its own hot water unit or a balcony drain. Shared pipework is explained in more depth in our guide to strata and body corporate plumbing. Inspecting a unit may take less time than a house, which can lower the quote.

Septic Tanks, Bores and Rainwater on Regional Blocks

Homes outside the sewer network treat wastewater on site, using a septic tank or an aerobic treatment unit, a system that uses air and pumps to treat sewage. Pump-out and service records should come from the seller, because these systems need regular attention under their approval conditions. Pumping out a septic tank costs $450 to $950, and an aerobic unit service costs $150 to $300 a visit. Lifting accessible lids, checking alarms and looking for wet ground over the leach drains, the buried trenches that let treated water soak away, are part of the visit. WA approval and servicing rules are set out on our page about septic tank services. Records showing regular servicing suggest the previous owner kept the system in order.

Some Perth and South West homes have a garden bore, and replacing a failed bore pump costs $900 to $2,800. Your plumber can check whether the bore and reticulation, the automatic garden sprinkler system, run on their own pipes without a link to scheme water, the treated mains supply. Where a link exists, a backflow device, a valve that stops water flowing back into the mains, is needed to protect the drinking supply. Orange staining on paths and walls can be a sign of bore water high in iron. More on pumps, sprinklers and backflow is in our bore and reticulation plumbing guide.

Homes in the Perth Hills, the Wheatbelt and the Great Southern may rely on rainwater tanks, and the tank, pump and filters are part of the plumbing. The plumber checks the tank for cracks or rust, along with the pump and the switching system between tank and mains water where both exist. If you are buying in the hills or further inland, plumbers who cover the Swan Valley and Perth Hills or the Avon Valley and Wheatbelt know these systems well. Every quote should state which of these items it includes.

What a Useful Inspection Report Includes

Good reports list each part of the plumbing that was checked, with a photo and a short note on its condition. Faults should be graded by urgency, so you can see at a glance what needs attention before settlement and what can wait. Drain footage should come as a recording, with the distance to each fault and a note on the pipe material. The report should also name every area that could not be inspected and the reason, such as locked rooms or buried access points. Request rough repair costs beside each fault where the plumber is willing to give them. Delivery within a day or two of the visit leaves more time to act on the findings.

Plain language makes the report easier to use with the seller and your settlement agent. Trade terms should be explained in the report or in a short glossary attached to it. Details such as the hot water model, the meter reading results and the pressure reading are useful long after settlement. Reports that only say a system is fine, without listing what was tested, give you little to rely on. Check that the report carries the plumber's licence number and the date of the visit.

Turning Findings Into Repair Quotes and Negotiation

Findings only help you if they reach the seller within the inspection period set by your condition. For each serious fault, get a written repair quote from a licensed plumber that sets out the work, the materials and the price. Your settlement agent can explain the options your condition allows, such as asking the seller to fix the fault, agreeing on a lower price or ending the contract. Put any agreement with the seller in writing, as Consumer Protection advises. Keep a copy of the quotes with the report, since they may be needed if the seller disputes the findings.

Minor faults, such as a dripping tap or a running cistern, rarely justify a negotiation because repairs are inexpensive. Fixing a leaking tap costs $150 to $330, which is small beside the cost of a sewer repair or a new hot water unit. Larger items, such as a collapsed sewer line or a failing hot water unit, can justify a price discussion. Buyers who still want the home can plan these repairs for the first weeks after settlement. Find local plumbers for that work through our WA plumbing services hub. Combining several small repairs into one booking after settlement keeps call-out charges down.

Checking the Plumber's WA Licence

Plumbing work in WA can only be done by people licensed by the Plumbers Licensing Board, with licensing run by the Department of Local Government, Industry Regulation and Safety. The plumbing contractor licence allows the holder to carry out and supervise plumbing work. The tradesperson's licence allows a plumber to work under the direction of a licensed contractor. Restricted plumbing permits allow gas fitters, electricians and rainwater storage professionals to do specific plumbing tasks. Use the Building and Energy online licence search to confirm the plumber's licence before booking.

Licensed contractors must carry their licence card and show it on request, and the card lists the work they can do. For gas checks, confirm separately that the plumber holds a gas fitting licence. Get the licence number written on the quote, then check it matches the name on the invoice and report. Plumbers who cover the metro area are listed on our hire a plumber in Perth page.

Getting Quotes You Can Compare

Comparable quotes start with the same information given to every plumber. Share the address, the age of the home, the number of bathrooms, the type of hot water unit and the last day of your inspection period. Say whether you want the drains filmed, whether the home has a septic system, bore or rainwater tank and whether you need the report within a set number of days. Request a written list of the checks included, the report format and the price for each part. Plumbers who reply with a clear list of the work make your comparison simpler. Photos of the hot water label and the meter box help each plumber understand the job before the visit.

Price differences between quotes often come from what is included and not from hourly rates. One plumber may include drain filming and a full report, while another quotes only a fixture check with a short summary. Turnaround time matters too, because a cheaper report that arrives after the inspection period has ended gives you no protection. Confirm whether the quote includes the call-out, travel and any after-hours charge if the only access time is on a weekend. After-hours call-outs cost $240 to $520 before any work, so a weekday booking is cheaper where the agent can arrange it.

What to Look Out For in Pre-Purchase Plumbing Quotes

Be cautious about any quote that bundles a pre-purchase inspection with repair work at a fixed price before the plumber has seen the home. Plumbers who will also carry out repairs have a reason to find problems, so the report should be based on evidence such as photos and footage. Quotes without a licence number, a business name or a written list of checks are harder to rely on. Watch for reports promised in a format you cannot open or share with your settlement agent.

Check that the drain camera work includes a recording and not just a verbal summary at the end of the visit. Make sure the quote says what happens if a drain is blocked and the camera cannot pass, since clearing it is extra work at $270 to $650. Confirm whether the plumber will test hidden leaks with the meter or with listening equipment, because those are different services at different prices. Standard multi-method leak surveys cost $450 to $850, so the quote should list one separately if it is included. Quotes that name each test and each price leave fewer surprises on the final invoice. Finally, confirm that the plumber can attend and report before your inspection period ends.

Plumbers for Pre-Purchase Checks Across Western Australia

We connect WA home buyers, investors and strata buyers with licensed plumbers for pre-settlement plumbing checks, sewer filming and leak testing. Choose your region below, post the job once and compare quotes from plumbers who work near the property.

▶ Perth 28 areas
Perth CBD Joondalup Wanneroo Butler Alkimos Stirling Scarborough Hillarys Karrinyup Morley Bayswater Bassendean Belmont Victoria Park South Perth Melville Applecross Canning Vale Willetton Cannington Fremantle Cockburn Rockingham Baldivis Gosnells Armadale Byford Ellenbrook
▶ Mandurah & Peel 20 areas
Mandurah Halls Head Dawesville Falcon Erskine Silver Sands Madora Bay San Remo Greenfields Meadow Springs Lakelands Coodanup Pinjarra Ravenswood Waroona Dwellingup North Dandalup Serpentine Jarrahdale Boddington
▶ Bunbury & South West 24 areas
Bunbury Australind Eaton Dalyellup Gelorup Capel Busselton Vasse Dunsborough Yallingup Margaret River Cowaramup Augusta Harvey Brunswick Junction Collie Donnybrook Balingup Nannup Bridgetown Boyup Brook Manjimup Pemberton Northcliffe
▶ Swan Valley & Perth Hills 24 areas
Guildford Midland Herne Hill Middle Swan West Swan Upper Swan Caversham Baskerville Henley Brook Swan View Helena Valley Kalamunda Gooseberry Hill Lesmurdie Walliston Carmel Pickering Brook Mundaring Glen Forrest Darlington Parkerville Chidlow Roleystone Bedfordale
▶ Avon Valley & Wheatbelt 22 areas
Northam York Toodyay Beverley Bakers Hill Clackline Wundowie Goomalling Dowerin Wongan Hills Cunderdin Tammin Kellerberrin Merredin Wyalkatchem Trayning Nungarin Quairading Brookton Corrigin Bruce Rock Narrogin

WA Pre-Purchase Plumbing FAQs

Does WA have a cooling-off period that gives me time for a plumbing inspection?
Consumer Protection WA says there is no requirement for a cooling-off period when buying a home in WA. Once the seller accepts your signed offer and acceptance, you are bound by its terms and conditions. The general conditions booklet outlines common terms, so check with your settlement agent how it treats inspection conditions. To leave room for a plumbing inspection, include a condition in the offer that names the inspection and the number of days allowed. Your settlement agent or lawyer can help you word the condition so it protects you.
How much does a pre-purchase plumbing inspection cost in WA?
None of Quote Yard's WA plumbing price guides gives a single figure for a whole-house inspection, so plumbers price it on quote. Quotes are built from a call-out with the first hour at $140 to $280 and extra time at $110 to $165 an hour. Filming the drains with a camera and supplying a report adds $280 to $520. Leak testing is extra, with basic acoustic detection at $250 to $450. These are 2027 estimates for WA, and any repairs found are quoted separately.
Will my building inspector test the plumbing?
Building inspection reports list faults, according to Consumer Protection, along with whether they can be repaired and any unsafe renovations. Inspectors may note visible problems such as stains, damp or dripping taps during that check. They do not film drains, read water pressure or run a meter leak test, which are tasks for a licensed plumber. Book both and give the plumber a copy of the building report so flagged areas get a closer look.
Who is responsible for the sewer pipes on a WA property?
The Water Corporation says sewer blockages within the property plumbing are the owner's responsibility. Its diagram places the overflow relief gully, the inspection shaft and the property connection on the owner's side of the boundary. Blockages in the sewer main, normally outside the property, are the Water Corporation's responsibility. Call 13 13 75 at any hour if wastewater is overflowing or causing damage.
How can I find out if a home has Typlex pipes?
Building and Energy says the affected pipes are grey and marked with the words Iplex and Typlex. They were installed in some homes built or renovated from about mid-2017 to mid-2022, though not every home from that period has them. The builder can confirm the brand of water piping, or the local government can supply the building permit and plans. Your plumber can also look for markings on exposed pipe in the roof space and under sinks. Owners of affected homes can register for a free leak detection unit through the industry response.
Can I get a plan of the drains before I buy?
Building and Energy says drainage plumbing diagrams show the layout of the drains on a property. They can be bought for a fee through the State Government's drainage plumbing diagram search. Give the diagram to your plumber so it can be compared with the drain camera footage. Records for older homes may be incomplete, so the camera is the better guide where the diagram is missing.
What paperwork should the seller have for past plumbing work?
Major plumbing work in WA, such as new fixtures, new drainage or a replacement water heater, needs a certificate of compliance. The licensed contractor must give it to the owner within five working days of finishing the work. Check for certificates covering renovated bathrooms, extensions and any new hot water unit. For gas work, the gas fitter must provide a Notice of Completion to the owner and the gas supplier within 48 hours.
Should I worry about asbestos pipes in an older WA home?
The Department of Health says homes built before 1990 likely contain asbestos in some building products. Older sewer and stormwater lines may be asbestos cement, which looks like grey fibrous pipe and can only be confirmed by laboratory testing. Asbestos cement in good condition is generally safe while it is left undisturbed. Check with any plumber quoting a repair how the material will be handled and removed safely.
Does the seller have to fix smoke alarms or safety switches before settlement?
Yes, WA homes must have compliant smoke alarms before ownership transfers, meaning mains powered alarms in working order that are no more than 10 years old. Two or more RCDs, the safety switches on the switchboard, must also be fitted before the title transfers, according to Consumer Protection. Only a licensed electrical contractor can install mains smoke alarms or RCDs. Plumbers do not test this work, so arrange an electrician if you want it confirmed.
What should I do with a plumbing report that finds serious faults?
Get a written repair quote for each serious fault while your inspection period is still running. Share the report and quotes with your settlement agent, who can explain the options your condition allows. These may include asking the seller to repair the fault, agreeing on a lower price or ending the contract. Consumer Protection advises putting any agreement with the seller in writing before you go ahead. Keep the report and quotes with your contract papers in case the findings are disputed later.

Other Checks Before You Buy

For Trades & Contractors - WA

WA plumbers who inspect homes for buyers can pick up new work on the WA job leads board, with more listings under plumber jobs in WA and drain plumber jobs.

Buying a Home in WA?

Post your job and compare quotes from licensed WA plumbers for pre-purchase plumbing checks, sewer camera footage and leak testing.

Get Free Plumber Quotes

About This Guide

This guide is general information only, and WA property rules, Water Corporation processes, product details and prices can change. Confirm requirements with your settlement agent, Building and Energy, your water supplier and a licensed plumber before you rely on any inspection or start work.

Reviewed by The Quote Yard Editorial Team

Published 19 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

Service availability may vary in regional WA. Verify licences at WA Building and Energy.
Prices are 2027 estimates for pre-purchase plumbing checks in Western Australia. Whole-house plumbing inspections are priced on quote, and the figures exclude repairs, asbestos handling and regional travel unless a row says otherwise.
Need work done? Get free quotes. Post a Job – It's Free