Looking for an Air Conditioning Installer in Sydney?

Tell us your suburb, whether you live in a house, terrace or apartment, which rooms you want cooled or heated, and where the outdoor unit could sit. We will pass the same description to local installers across Sydney, so every quote you receive prices the same job.

Get Free Air Conditioning Quotes

Sydney Air Conditioning Price Guide

Installer labour, per hour$80 - $120
Back-to-back split, install only$800 - $1,200
2.5 kW split, supplied and installed$1,800 - $2,500
5 kW split, supplied and installed$2,400 - $3,400
7 kW split, supplied and installed$2,800 - $4,200
Multi-split, 3 heads, Western Sydney$6,500 - $9,000
Multi-split, 3 heads, CBD apartments$8,000 - $11,500
Ducted, Western Sydney$9,000 - $22,000
Ducted, North Shore and Northern Beaches$12,000 - $30,000
Switchboard upgrade with safety switches$1,400 - $3,600

These are estimated Sydney price ranges for 2027. Your price depends on the unit size and brand, the length of pipe between the indoor and outdoor units, access at height, and whether the switchboard or supply needs electrical work.

Hire an Air Conditioning Installer Sydney NSW - Get Local Quotes

Sydney homes need very different cooling depending on where they sit. Harbourside apartments may only have a balcony for the outdoor unit, while brick houses in the west often need larger units for rooms with afternoon sun. A west facing room in Penrith may need a bigger unit than the same room near the beach, so ask for sizing room by room. Housing type also shapes an install, because terraces, semis and strata buildings each limit where pipes and outdoor units can go. Air conditioning work is a licensed trade in New South Wales at any job value, and anyone handling the refrigerant, the gas that carries heat, also needs a national licence. Apartment owners usually need strata approval first, and tenants need the landlord's written permission before any unit goes on a wall. Ducted systems may also need switchboard or power supply upgrades, which a licensed electrician must carry out and certify. Installers charge about $80 to $120 an hour, and a whole home ducted system can cost from about $9,000 in Western Sydney to $30,000 on the North Shore. The prices on this page are 2027 estimates drawn from our NSW air conditioning cost pages, which list Sydney prices for ducted and multi-split systems. Older ceilings, upper storey walls and tight side passages can each add time and cost on the day, so a clear brief helps. Post your job on The Quote Yard and we will connect you with local air conditioning installers across Sydney who can quote on it.

Sydney Air Conditioning Work Covered

Air conditioning work across Greater Sydney runs from a single bedroom split system in a unit to whole home ducted systems in two storey houses. We can connect you with local installers who all price the same written description of your job.

Get Free Quotes

At a Glance - Sydney Air Conditioning Installs, 2027 Estimates

Job Price Range How It Is Charged What Drives It In Sydney Who Can Do It
Installer labour $80 - $120 per hour Per technician, per hour Pipe run, height and access Licensed air conditioning technician
Back-to-back split $800 - $1,200 Install only, unit supplied Wall type and bracket Licensed air conditioning technician
3.5 kW split, supplied and installed $2,100 - $2,900 Fixed price Brand and pipe length Licensed air conditioning technician
8.5 kW or larger split $3,500 - $5,500 Fixed price Open plan size and circuit Technician and electrician
3 head multi-split, inner west and east $7,500 - $10,500 Fixed price Pipe routes through older walls Licensed air conditioning technician
4 head multi-split, Hills and Hornsby $8,800 - $12,200 Fixed price Roof space and storeys Licensed air conditioning technician
Ducted, Inner and Eastern Suburbs $10,000 - $25,000 Fixed after a site visit Ceiling height and bulkheads Contractor and electrician
Ducted, Hills and North West $12,000 - $28,000 Fixed after a site visit House size and zones Contractor and electrician
Ducted, South and Sutherland $10,000 - $24,000 Fixed after a site visit Roof access and zones Contractor and electrician
Extra ducted zone $400 - $900 per zone Per zone Dampers and controller Air conditioning contractor
Extra pipe beyond 3 metres $50 - $150 per metre Per metre Distance to the outdoor unit Licensed air conditioning technician
New circuit for the unit $200 - $500 Fixed price Board space and cable route Licensed electrician
Single to three phase supply $2,600 - $8,500 Fixed after assessment Overhead or underground cable from the street Electrician and Level 2 provider

What Pushes a Sydney Air Conditioning Bill Up

What is involved
Long pipe runs from a back bedroom to a side passage go past the pipe length included in the price. Each extra metre is usually charged on top of the fixed price.
Second storey walls and roofs mean ladders, scaffolds or platforms for safe access. Work where someone could fall more than two metres also needs a written safety plan.
Older switchboards may have no spare space or no safety switches for a new circuit. An electrician then has to upgrade the board before the unit can run.
Strata, heritage and rental approvals add time before the install date. Plans, drawings or written consent may be needed before any hole is drilled.
Ask every installer to name the indoor and outdoor model numbers, the pipe length included, and any electrical work as separate lines on the quote.

Hiring an Air Conditioning Installer in Sydney: First Steps

Most Sydney installs fall into one of three types, and knowing which one you want makes every quote easier to read. A split system has one indoor unit, often called a head, on a wall and one outdoor unit, joined by insulated copper pipes that carry the refrigerant gas. A multi-split runs two or more indoor heads from a single outdoor unit, which suits apartments with only one spot for a condenser, the outdoor unit that releases heat. Ducted systems hide the indoor unit in the roof space and push air through ducts to ceiling vents in each room. For how each type works and when one suits a home better, see air conditioning installation across NSW. Sydney adds its own costs and approvals, from strata apartments to heritage streets.

Before anyone visits, list the rooms you want to cool or heat and how you use each of them. A bedroom used only at night needs a different plan from an open plan living area that faces west and gets full sun all afternoon. Take photos of the inside walls, the outside wall or balcony where the outdoor unit could go, and the switchboard, or fuse box, with its cover open. Note whether the home is a house, a terrace, a townhouse or an apartment, because that changes the approvals as much as the price. Installers who receive the same short brief and the same photos can quote the same job, which makes their totals comparable.

Sydney Air Conditioning Prices by Region, 2027 Estimates

Single split systems cost about the same across Sydney, because the unit and the labour change little from suburb to suburb. A 2.5 kW unit for a bedroom costs about $1,800 to $2,500 supplied and installed, while a 7 kW unit for a living area runs $2,800 to $4,200. The kW figure is the unit's capacity, meaning how much heat it can move into or out of a room. Installers in Sydney charge about $80 to $120 an hour, and a simple split system takes most of a day. If you buy the unit yourself, a back-to-back install, where the indoor and outdoor units sit on either side of the same wall, costs about $800 to $1,200 in labour. Every figure here is a 2027 estimate for normal working hours.

Multi-split and ducted prices change more across the city, because house size, roof access and building type all shift the labour. A three head multi-split costs about $6,500 to $9,000 in Western Sydney and Parramatta but $8,000 to $11,500 for CBD and inner city apartments. Whole home ducted systems range from about $9,000 to $22,000 in Western Sydney up to $12,000 to $30,000 on the North Shore and Northern Beaches. Larger homes with more rooms to zone and harder roof access explain most of that gap. You can read more about these figures in our guides to ducted air conditioning installation and multi-split system costs.

Job Sydney Range Charged As What Moves It
Back-to-back split, install only $800 - $1,200 Labour only Wall type and bracket
2.5 kW split, supplied and installed $1,800 - $2,500 Fixed price Brand and wall type
3.5 kW split, supplied and installed $2,100 - $2,900 Fixed price Pipe length and bracket
5 kW split, supplied and installed $2,400 - $3,400 Fixed price Room size and model
7 kW split, supplied and installed $2,800 - $4,200 Fixed price Circuit and access
3 head multi-split, north shore and northern beaches $7,200 - $10,200 Fixed price Pipe routes and storeys
4 head multi-split, inner west and eastern suburbs $9,800 - $13,500 Fixed price Older walls and access
4 head multi-split, CBD and inner apartments $10,500 - $14,500 Fixed price Strata rules and balconies
8.5 kW or larger split $3,500 - $5,500 Fixed price Open plan size and circuit
Ducted, Inner and Eastern Suburbs $10,000 - $25,000 After a site visit Roof space and bulkheads
Ducted, Western Sydney $9,000 - $22,000 After a site visit House size and zones
Ducted, North Shore and Northern Beaches $12,000 - $30,000 After a site visit Larger homes, more zones
Ducted, Hills and North West $12,000 - $28,000 After a site visit Two storeys and zones
Ducted, South and Sutherland $10,000 - $24,000 After a site visit Roof access and zones

How a Sydney Install Quote Is Built Up

Most installers quote a fixed price for a standard install and then list extras that depend on the site. A standard split system install usually includes a set length of pipe, often the first 3 metres, a wall bracket or ground pad for the outdoor unit, and a drain for condensation water. Extra pipe costs about $50 to $150 a metre, which adds up quickly when the outdoor unit has to sit at the far end of a side passage. Running pipes through the roof space instead of along an outside wall adds about $200 to $400. A second storey install adds about $200 to $500 because of the extra time and equipment needed at height. Ask each installer to say what their standard install includes, so a low quoted price is not hiding a short length of included pipe.

Ducted quotes work differently because the installer designs the system around the house. Zones, which let you heat or cool parts of the house separately, cost about $400 to $900 each on top of the base price. Where ducts cannot fit in the roof space, a bulkhead, a boxed section of lowered ceiling, may be built to hide them. ActronAir makes NEO controllers with individual zoning for its ducted systems. Polyaire makes AirTouch zoning controllers and flexible duct, so ask which controller and duct each quote includes. A quote without a named controller and zone count is hard to compare with one that lists both.

Payment terms matter on bigger jobs, since a ducted install can run over several days and involve an electrician as well as the installer. The NSW consumer building guide caps the deposit you can be asked to pay before work starts at 10 per cent. A sensible schedule ties each later payment to a visible stage, such as ducts in the roof, the outdoor unit set and connected, and the system tested. The final payment should come after the system runs in every zone and you hold the electrical certificate, with the stages agreed in writing before work starts.

Reading a Ducted Payment Schedule

Four stages, with each one paid only once that part of the work is done
Stage on the schedule
What should be finished
Deposit
No more than 10 per cent of the price
Hidden work in the roof
Ducts, drain and pipes run in the roof
Final fitting
Outdoor unit set, vents and controller fitted
Commissioning
System tested in every zone

Every extra on the quote should show the length, size or count it assumes.

Payments should never run ahead of the work you can see on site.

Take photos of the ducts and pipes in the roof space before the ceiling vents go in, since they are hard to inspect later.

Two Licences Every Sydney Installer Should Hold

Air conditioning work in New South Wales needs a state licence or certificate whatever the job is worth, so even a small split system install must be done by a licence holder. The state licence covers installing, servicing and maintaining a system, plus limited electrical work such as minor wiring changes, testing and replacing parts on the unit's side of its power switch. Contractor licences are held by the business, while a qualified supervisor certificate or tradesperson certificate is held by the person doing the work. You can check a licence on the NSW Government's online licence check, and Building Commission NSW deals with licensing matters and unlicensed work.

The second licence is national and covers the refrigerant gas itself. Anyone fitting, servicing or removing a split or ducted system needs a refrigerant handling licence from the Australian Refrigeration Council, and the business needs a refrigerant trading authorisation to buy and hold the gas. Both can be searched on the council's Look for the Tick register through ARCtick, and the code on a licence shows what the holder may work on. A full RAC01 licence covers refrigeration and air conditioning work of all kinds except in cars and other vehicles. A restricted RSS03 licence covers only single head split systems under 18 kW, a point set out in more depth in our Central Coast installer guide.

Part of the Job Who Does It Licence or Paperwork Check Before Work
Refrigerant pipes, filling with gas and final testing Air conditioning technician Refrigerant handling licence Look for the Tick search
Installing and servicing the system Air conditioning contractor NSW air conditioning licence NSW online licence check
New circuit, isolator or switchboard work Licensed electrician NSW electrical licence and CCEW Licence check and certificate copy
Meter, service line or supply upgrade Level 2 accredited service provider Level 2 accreditation Ask which network it was lodged with
Bulkheads or framing for ducts Carpenter or builder Licence for work over $5,000 Licence check
Patching walls and ceilings Plasterer or painter Written quote and insurance Written scope of work
Disconnecting an old gas heater Licensed gasfitter NSW gasfitting licence Licence check

Specialist Work Contracts, the $5,000 Line and Deposit Limits

NSW treats air conditioning as specialist work, a legal category that also covers plumbing, electrical work and gasfitting. The state's consumer building guide says contracts for specialist work valued at more than $5,000 must be in writing, which takes in most multi-split jobs and every ducted job. A written contract should name both parties, the licence number, the price or how it is worked out, and what is and is not included. Smaller split system jobs below that figure still deserve a written quote that names the units and the pipe length included. A licence is still needed below $5,000, because the licence rule for specialist work applies whatever the price. The same guide caps the deposit you can be asked to pay before work starts at 10 per cent.

Jobs over $20,000, which includes many ducted systems in the larger Sydney homes, bring in the large contract rules for residential building work. A large job contract must state a cooling-off period of five full business days to cancel, and the contractor must give you a home building compensation certificate where that cover is required. Home building compensation is the state scheme that protects owners on larger building jobs if the contractor cannot finish or fix the work. Ask a ducted installer in writing whether their contract needs that cover, and pay no deposit until you hold either the certificate or a clear written answer.

NSW statutory warranties, which are protections set by the Home Building Act, last six years for major defects and two years for other defects in residential building work. Builders and tradespeople must also guarantee that their work does the job it was meant for and is done with proper care. Those protections sit alongside the maker's warranty on the unit, which covers the equipment rather than the installer's work. Keep the contract, the quote, the invoices and every message about changes in one place. A change agreed on the day, such as moving the outdoor unit to the other side of the house, should be confirmed in writing with its price. That record matters if a fault appears a year later and the installer and the maker each blame the other.

NSW Contract Rules for Air Conditioning Work

10 per cent is the most you can be asked to pay as a deposit before work starts
Contract price
What applies
$5,000 or less
Licence still needed, get a written quote
Over $5,000
Written contract for specialist work
Over $20,000
Large job rules and five day cooling-off
Any job value
Licensed installer and licensed electrician
A licence is needed for air conditioning work at any price, so a small job never removes the need for one.

Terraces, Semis and Heritage Streets Where the Exempt Rules Stop

Most houses can take an outdoor unit without a council application, because air conditioning units can be exempt development under the Codes SEPP, the state planning policy for minor building work. Exempt development means building work small enough that no council or certifier approval is needed, as long as every listed standard is met. For a home, the unit must sit at least 450 millimetres from each boundary and not in front of the house's front wall or on a wall or roof facing the main road. A wall mounted unit can be no higher than 1.8 metres above ground, it must not reduce the fire resistance of a wall or roof, and any hole for it must be waterproofed. The state's summary of these standards is on the NSW planning website, and the full text sits in clauses 2.5 and 2.6 of the policy. Those rules suit a free standing house with a side passage, but many Sydney homes are not built that way.

Terraces and semi-detached houses often share a party wall, the common wall between two attached homes, and have little or no side setback. A unit squeezed into a narrow rear yard may not meet the 450 millimetre boundary distance, and a condenser on the roof falls outside the exempt standards because they allow only wall or ground mounting. In a heritage conservation area, an area protected for its historic character, the unit must sit at or behind the back of the house, and on a heritage item it must be on the ground. The City of Sydney says consent is generally required for work on heritage items, meaning individually listed buildings, or in heritage conservation areas, and the City of Sydney website explains how to apply. Close neighbours hear outdoor units too, and the NSW Environment Protection Authority says an air conditioner must not be heard in a neighbour's home after 11 pm or before 7 am on weekdays. If the side fence is being replaced at the same time, a Sydney fencer can plan the new line around the unit's clearance.

Situation Exempt Standard Common Sydney Problem What to Do
Free standing house At least 450 mm from each boundary Narrow side passage Measure before choosing the spot
Terrace or semi Wall or ground mounted only Roof is the only open space Ask council which approval applies
Heritage conservation area At or behind the rear building line Front balcony or street wall Use the rear yard or apply
Heritage item Mounted on the ground No ground space at the rear Seek council advice first
Street facing wall Not on a wall facing the main road Corner blocks with two frontages Confirm the main road with council
Fire rated wall Fire resistance not reduced Holes through party walls Seal the holes to suit the wall
Upper storey wall No higher than 1.8 m above ground Only free wall is upstairs Use a lower wall or apply

Strata Approval for a Split System in a Sydney Apartment

Apartment owners in Sydney live in strata schemes, where an owners corporation made up of all the owners manages the common property. Common property usually includes the outside walls and concrete floors, so an install that drills through them affects more than your own apartment. The NSW Government lists installing a reverse cycle air conditioner as a minor renovation, the middle category between cosmetic work and major renovations. Minor renovations need approval, which the strata committee can give if a by-law, one of the scheme's own binding rules, allows it. Where no by-law covers it, the owners vote at a meeting and more than half the votes cast must be in favour.

The application should include plans of the work, the dates and times it will happen, and the qualifications and details of the tradespeople. For an air conditioner that means the indoor and outdoor unit positions, the pipe route, any holes through walls, and the installer's licence numbers. If the committee refuses, it must give written reasons, and an application not refused within three months counts as approved. Owners corporations keep records of approved minor renovations for 10 years, which helps when the apartment is later sold. Many buildings also have by-laws that limit where and how outdoor units can go, and the state planning guidance mentions this too. Full details of the strata rules are on the NSW Government website.

Steps for a Strata Air Conditioning Approval

Step
What it involves
Read the by-laws
Rules on unit position, size and colour
Prepare the application
Plans, dates, times and installer details
Committee or owners vote
Committee under a by-law, or over half the votes
Keep the approval
A copy goes to the installer before work
Do not let the installer drill any external wall until the written strata approval is in your hands.

Balcony Condensers, Holes Through Walls and Child Safety

The state's exempt standards allow an outdoor unit to sit on the floor of a balcony, which is how many Sydney apartments are cooled. That spot needs room for air to flow around the unit, a drain path for condensation water, and a clear route for the pipes to reach the indoor head. Waterproofing matters on a balcony, because the waterproof layer under the tiles keeps water out of the apartment below, and a bracket screwed through it can let water in. A balcony with cracked tiles or worn waterproofing may need a Sydney tiler or a waterproofer in Sydney before the unit goes down. Ask the installer to use a freestanding stand or rubber feet that rest on the tiles instead of fixings drilled into the floor. Pipes that run down the outside of a building usually sit in a plastic duct cover, and the strata committee may ask for one that matches the wall colour.

Children can climb onto anything solid placed next to a railing. The Sydney Children's Hospitals Network advises moving climbable objects such as chairs and tables away from balcony railings, and a condenser box is just as easy to climb. Place the outdoor unit away from the balustrade, the rail or glass panel at the balcony edge, or choose a wall bracket position if the strata approval allows it. Raise this at the quoting stage, since moving a unit after the pipes are cut to length costs extra.

Item Rule or Advice Source Install Point
Unit on the balcony floor Allowed under the exempt standards NSW planning guidance Leave space around it for airflow
Hole through an external wall Must be properly waterproofed Exempt standards Seal around the pipe hole
Fire rated wall or slab Fire resistance must not be reduced Exempt standards Use a fire rated seal
Unit near the railing Keep climbable objects away Sydney Children's Hospitals Network Set the unit back from the edge
Strata by-laws May limit where units go NSW planning guidance Check before choosing a spot

Western Sydney Heat and Sizing for the Hottest Rooms

Rooms in Sydney's west often need a bigger unit than the same rooms near the coast, because summer days there run much hotter. In January 2020 the Bureau of Meteorology recorded 48.9 degrees at Penrith Lakes, the highest temperature ever measured in the Sydney basin. That month Penrith Lakes and Richmond averaged daily highs of 32.5 degrees, while Observatory Hill near the city averaged 28.1 degrees, a gap installers should allow for. Overnight lows were slightly higher at Observatory Hill than at Penrith Lakes, so coastal bedrooms used at night still need enough cooling. A unit that suits an eastern suburbs apartment may be too small for a west facing living room in Penrith on the hottest afternoons.

Sizing should start with a room by room look at floor area, ceiling height, insulation, windows and shade, not a quick guess. Ask each installer to write down the capacity they chose for each room and why, so you can compare the reasoning as well as the price. Large west facing glass, a dark roof and a top floor apartment all push the needed capacity up, while good ceiling insulation brings it down. It is worth asking whether ceiling insulation installation belongs in the plan before a bigger unit is chosen. Shade from a tree or awning outside a hot window helps too, and a Sydney gardener can keep plants trimmed clear of the outdoor unit's airflow. Daikin makes split systems in its Zena and Alira X ranges, so their published capacities are easy to line up against other makers.

Most units sold for homes are reverse cycle, which means the same system heats in winter by running the refrigerant the other way. That makes the heating capacity worth checking for rooms that are cold in July, such as south facing rooms or ground floor units with tiled floors. Specifications on new units show the capacity for both modes, and you can compare heating and cooling in our guide to reverse cycle air conditioning. Panasonic makes wall mounted units for single rooms and multi room systems that run up to four indoor units from one outdoor unit. Choose the size for whichever season is harder on that room, not only for summer.

January 2020 in the Sydney Basin

Station
What the Bureau recorded
Penrith Lakes
48.9 degrees on 4 January, a Sydney basin record
Richmond RAAF
Previous record of 47.8 degrees, set in 1939
Penrith Lakes and Richmond
Average daily high of 32.5 degrees
Observatory Hill
Average daily high of 28.1 degrees
Ask for the capacity of each indoor unit in both cooling and heating, since a room can need more of one than the other.

Renters, Landlords and Written Consent Before an Install

Many Sydney households rent, and a tenant cannot simply book an installer. NSW rules let a tenant make changes only if the lease allows it or the landlord gives written permission. Landlords cannot unreasonably refuse a set list of minor changes, such as fly screens or child safety gates, but air conditioning is not on that list. That means the landlord can say no to a wall mounted unit, and the tenant needs consent in writing before any hole is drilled. The protection for minor changes also does not apply to heritage properties, and some limits apply in strata schemes.

A landlord who agrees should say in writing who pays, who owns the unit at the end of the lease, and who arranges servicing. If the tenant pays, the agreement should state whether the unit stays or must be removed and the wall made good when they move out. Making good old wall holes after a unit comes down costs about $100 to $400, and moving a unit to a new home costs about $600 to $1,200 for the indoor and outdoor parts. A Sydney removalist can carry a unit that is already taken down, but disconnecting and reconnecting it is licensed work covered under air conditioning relocation.

Landlords installing air conditioning in a rental face the same licence, strata and planning rules as owner occupiers. A unit added between tenancies can be planned around the empty home, which makes access to rooms, the roof space and the switchboard simpler. Choosing a model with clear service access and a washable filter makes later maintenance easier. Samsung makes split, ducted and 360 Cassette systems, the last of which sits in the ceiling where wall space is limited. LG makes split, multi split and ducted systems, so a landlord with several properties can keep to one maker's controls. Keeping the manual, warranty card and service history with the property records saves time when a tenant reports a fault.

Rental Air Conditioning in Writing

Question
Agree in writing
Who pays for the unit
Landlord, tenant or shared
Who owns it at the end
Stays with the home or leaves
Who services it
The landlord's or the tenant's installer
Making good
Holes patched if the unit is removed
A verbal yes from a property manager is not enough, so ask for the landlord's consent by email or letter.

Circuits, Switchboards and Three Phase Supply for Bigger Systems

A new split system often needs its own circuit from the switchboard, which costs about $200 to $500 when the board has space and safety switches. Safety switches, also called RCDs, cut the power when electricity escapes through a fault or a person, and an older board may have none at all. A switchboard upgrade with safety switches costs about $1,400 to $3,600 in Sydney, and a single safety switch added to an existing board about $180 to $450. The air conditioning licence covers only limited wiring, so new circuits, board work and the isolating switch, an off switch beside the outdoor unit, need a licensed electrician. The electrician must lodge a Certificate of Compliance for Electrical Work, called a CCEW, within seven days of testing, and from 1 July 2026 every CCEW goes through the state's online portal.

Most homes run on single phase power, while three phase supply brings in three live wires for power hungry equipment such as a large ducted system. A load assessment by an electrician costs about $180 to $480 and shows whether the existing supply can carry the new system. Moving from single to three phase in Sydney costs about $2,600 to $8,500, depending on whether the service line, the cable from the street, is overhead or underground. Work on the service line and meter is done by a Level 2 accredited service provider, an electrician accredited for supply connections. The supply network is Ausgrid across much of Sydney and Endeavour Energy in Greater Western Sydney. To find which network supplies your street, see our guide to hiring an electrician in Sydney.

Electrical Item Sydney Range Who Does It When It Comes Up
New circuit for the unit $200 - $500 Licensed electrician No spare circuit on the board
Safety switch added $180 - $450 each Licensed electrician Older board with spare space
Switchboard upgraded $1,400 - $3,600 Licensed electrician Ceramic fuses or a full board
Load assessment $180 - $480 Licensed electrician Large ducted or multi-split
Single to three phase $2,600 - $8,500 Electrician and Level 2 provider Supply too small for the load
Electrician labour $90 - $150 per hour Licensed electrician Extra work found on the day
Isolating switch beside the outdoor unit Priced on quote Licensed electrician Ask whether it is included

Older Sydney Ceilings, Asbestos and the Loose-Fill Register

Ducted systems and pipe runs through the roof put installers in ceiling spaces that may not have been opened for decades. NSW asbestos advice is that homes built before 1990 may contain asbestos, and air conditioning is named among the trades that can come across it. Fibro eaves and old wall or ceiling sheets are worth pointing out when you book the site visit. If you are unsure about a material, arrange asbestos testing and inspection before work starts, so the installer can plan a route around it or allow for licensed removal. Brivis makes ducted gas heating and evaporative cooling, and an existing system of either kind already uses the roof space, so tell every installer what is up there. If a Sydney bathroom renovator already has a ceiling open nearby, ask both trades whether pipes can run through it at the same time.

A separate NSW register lists homes confirmed to contain loose-fill asbestos, a loose insulation once blown into some roof spaces. The register is kept under the Home Building Act so that tradespeople, councils and emergency services can take proper safety measures, and anyone can search it by address. A listing also appears on the property's section 10.7 planning certificate, the document council issues on a property's planning status. Check the address before you accept any ducted quote or let anyone into the roof space, and tell every installer the result so they can plan the work around it.

Finding Rule or Advice Who Deals With It Before the Install
Home built before 1990 May contain asbestos Asbestos tester Test suspect sheets first
Address on the loose-fill register Confirmed loose-fill asbestos Follow NSW Government guidance Tell every installer
Old ducted gas heating Existing ducts in the roof space Installer and licensed gasfitter Agree what stays and goes
Old insulation batts Moved to run ducts Installer Agree who puts them back
Solar or battery system Extra steps to switch off safely Electrician Share the shutdown steps

Second Storeys, Roofs and Work at Height

Many Sydney houses have two storeys, and townhouses often have their only outdoor space on an upper balcony or roof. An outdoor unit fixed high on a wall, or pipes run across a roof, means the installer works at height for part of the job. SafeWork NSW expects falls to be managed in order, starting with work on the ground or a solid surface, then fall prevention such as guardrails or scaffolds. Work positioning systems, which stop a worker reaching an edge, come next, and harnesses that catch a fall are the last option. Where a person could fall more than 2 metres, a safe work method statement, known as a SWMS, which is a written plan of the risks and controls, must be completed before the work starts. That planning, and the extra equipment, is part of why second storey work adds about $200 to $500.

A quote that relies on a ladder to reach a high wall deserves a question about how the unit will be lifted and held. SafeWork NSW advises against standing on the top two rungs of a stepladder, and an extension ladder used to reach a roof should extend at least 1 metre past the landing. A concrete pad for a ground mounted unit avoids work at height altogether, and a Sydney concreter can pour one where the yard has space. Toshiba makes inverter ducted, single split and multi split systems, where inverter means the compressor speeds up and slows down instead of switching on and off. Mitsubishi Heavy Industries makes split, multi split and ducted systems, so ask whether the outdoor unit for your chosen model can sit at ground level.

Work at Height on an Air Conditioning Install

2 metres is the fall height above which a safe work method statement is needed
Control
What it looks like on site
Ground or solid surface
Outdoor unit on a pad or low bracket
Fall prevention
Scaffold, guardrail or elevated work platform
Work positioning
Restraint that stops a worker reaching an edge
Fall arrest
Harness and anchor as the last option
Ask how the outdoor unit will be lifted to a roof or upper wall, and who supplies any scaffold or platform.

Install Day Paperwork and What to Keep Afterwards

The last hour of an install should be spent testing and explaining the system, not packing up. During commissioning, the final testing and setup, the technician should pressure test the pipes for leaks, vacuum out air and moisture, run the unit in both modes, check the drain and show you the filters. Testo makes heating and cooling measuring instruments, and a careful installer will show you the readings taken during commissioning. Ask for the model and serial numbers of every indoor and outdoor unit on the final invoice. Those numbers are what the maker asks for when you register the warranty or make a claim.

If an electrician did any wiring, ask for a copy of the CCEW, which can be sent to your email when it is lodged. If the job used the state's Energy Savings Scheme discount, keep the nomination form, the form you sign to pass the discount to the installer, which must be signed before the installation begins. Keep the strata or landlord approval, the contract and the invoice in the same folder. A service or tune-up later costs about $120 to $300, and air conditioning maintenance plans keep the service history in one place.

Ducted systems need a short walk through of the zone controller before the installer leaves. Ask which zones are on which dampers, the flaps inside the ducts that open and close, and how to shut a zone for a room that is not used. Rinnai makes ducted reverse cycle, inverter split and multi split systems. Mitsubishi Electric makes wall mounted, floor console, ducted and multi head split systems, so check which controller manual matches the model fitted. Store the manual near the controller or keep a digital copy, since filters and settings are easier to manage with it at hand. A photo of the outdoor unit's label also saves time if you ever need a repair.

Handover Item Why It Matters Who Provides It Keep It With
Model and serial numbers Needed for warranty and repairs Installer Invoice
CCEW copy Shows the wiring was tested Electrician Contract
Warranty registration Records the unit with the maker You or the installer Manual
Strata or landlord approval Shows the install was allowed Strata manager or landlord Property records
Energy Savings Scheme form Confirms the discount claimed Installer Invoice
Filter cleaning steps Keeps the unit running well Installer Manual
Pipe length and route Helps a later repair or move Installer Invoice

Consumer Guarantees, Fair Trading and NCAT

Every air conditioner and every install comes with consumer guarantees under the Australian Consumer Law, and these apply automatically. The unit must be of acceptable quality, and the installation must be done with acceptable care and skill and finished within a reasonable time. A manufacturer's warranty is an extra promise on top of those guarantees, not a replacement for them. Where a product or service fails a guarantee, you may be entitled to a repair, replacement, refund, cancellation or compensation for loss. The Australian Competition and Consumer Commission explains how these rights work.

Start any complaint in writing to the installer, giving the fault, the date it began and what you want done. If that does not settle it, home building disputes must first be referred to NSW Fair Trading before the tribunal will accept an application. The NSW Civil and Administrative Tribunal, known as NCAT, can make orders about residential building work, including specialist work such as air conditioning. Licensing problems, such as an installer working without a licence, can go to Building Commission NSW. Keep photos, messages and the paperwork from install day, because each step asks for evidence. A clear record of what was agreed is the strongest evidence you can bring.

What to Look Out For in a Sydney Air Conditioning Quote

A quote that names a capacity but no model number leaves room for a cheaper unit to arrive on the day. Look for the indoor and outdoor model numbers, the pipe length included, the bracket or pad, and whether the electrical work is in the price or excluded. Watch for quotes that say nothing about strata, heritage or landlord approval when your home clearly needs it. A price far below the Sydney ranges on this page can mean something has been left out, such as the circuit or the second storey access. Ask about anything missing before you compare totals.

Check the licences before you check the price. The business name on the quote should match the NSW licence and the refrigerant trading authorisation, and the technician should hold a refrigerant handling licence. Be wary of any installer who asks for more than 10 per cent upfront or for cash with no invoice. Temperzone makes ducted split systems in its Australian and New Zealand factories, and a good quote names the actual maker and model in the same way instead of a generic ducted system.

Checks Before Signing

What to check
Licence number and business name match the NSW licence register.
Refrigerant trading authorisation and technician licence checked on Look for the Tick.
Deposit no higher than 10 per cent of the contract price.
Indoor and outdoor model numbers listed for every single unit.
Pipe length, bracket or pad, and any second storey work priced.
Strata, heritage or landlord approval assigned to someone by name.

A quote that leaves out the circuit can grow once the electrician arrives.

No mention of how the outdoor unit reaches an upper wall is another gap.

If an installer pushes you to sign on the spot, remember that large contracts carry a five business day cooling-off period.

Getting Sydney Air Conditioning Quotes That Line Up

Send every installer the same brief, with the rooms, their sizes, the home type, photos and any approvals already in hand. Ask each one to visit, because a pipe route or switchboard problem is easy to miss in photos. Request a written quote that lists each unit's model and capacity, the pipe length included, the extras, the electrical work and the payment stages. Three quotes are usually enough to see where a price sits without adding confusion. If one installer recommends a different system, ask the others to price that option too. That way every quote prices the same system.

Compare the capacity chosen for each room as closely as the price. A cheaper quote that puts a smaller unit in a west facing living room may leave that room too warm on hot afternoons. Check that each quote states who handles the circuit and the CCEW, and who arranges any Level 2 supply work. For apartments, ask whether the installer has worked under strata approvals before and how they protect the lift and common areas. If an old unit is coming out, ask how each quote handles its removal, and compare the approach with air conditioning replacement.

Timing also affects price and availability across Sydney. Demand rises when the first hot weeks of summer arrive, so booking in spring or autumn usually gives more choice of dates and more time for site visits. A clear brief sent early lets installers sort out strata or landlord approvals, council questions and electrical checks well before the install day. Post your job on The Quote Yard to reach local installers who can all quote on the same description.

Air Conditioning Installers Across Sydney

Installers we work with cover Greater Sydney, from the CBD and inner suburbs to the Hills, the west and the Sutherland Shire. Ask about any travel charge when you book the site visit, so it appears on the written quote.

▶ Sydney 30 areas
Sydney CBD Parramatta Blacktown Penrith Liverpool Bankstown Hurstville Sutherland Cronulla Kogarah Rockdale Marrickville Randwick Bondi Manly Chatswood Hornsby Ryde Epping Castle Hill Baulkham Hills Rouse Hill Kellyville Macquarie Park Strathfield Burwood Auburn Fairfield Campbelltown Camden
▶ Central Coast 24 areas
Gosford Erina Terrigal Wamberal Avoca Beach Kincumber Woy Woy Umina Beach Ettalong Beach Wyong Tuggerah The Entrance Long Jetty Bateau Bay Toukley Budgewoi Lake Munmorah Warnervale Wadalba Kariong Somersby Narara Niagara Park Saratoga
▶ Blue Mountains 22 areas
Katoomba Leura Wentworth Falls Blackheath Mount Victoria Medlow Bath Bullaburra Lawson Hazelbrook Woodford Linden Faulconbridge Springwood Winmalee Valley Heights Warrimoo Blaxland Glenbrook Lapstone Mount Riverview Mount Wilson Megalong Valley
▶ Illawarra 30 areas
Wollongong Fairy Meadow Figtree Mount Keira Mount Ousley Corrimal Bellambi Woonona Bulli Thirroul Austinmer Coledale Helensburgh Port Kembla Warrawong Berkeley Dapto Kembla Grange Albion Park Shellharbour Oak Flats Flinders Kiama Gerringong Minnamurra Jamberoo Shell Cove Stanwell Park Coalcliff Unanderra
▶ Southern Highlands 24 areas
Bowral Mittagong Moss Vale Burradoo Berrima Bundanoon Exeter Sutton Forest Robertson Kangaloon Fitzroy Falls Welby Braemar Willow Vale New Berrima Colo Vale Yerrinbool Hill Top Balmoral Village Bargo Wingello Penrose Marulan Goulburn
▶ South Coast 28 areas
Nowra Bomaderry Berry Kangaroo Valley Shoalhaven Heads Culburra Beach Callala Bay Huskisson Vincentia Sanctuary Point St Georges Basin Sussex Inlet Ulladulla Milton Burrill Lake Batemans Bay Malua Bay Moruya Tuross Head Narooma Bodalla Bermagui Cobargo Bega Tathra Merimbula Pambula Eden

Sydney Air Conditioning Installer FAQ

Is a split system a minor renovation under the NSW strata rules?
In most cases yes, because the NSW Government lists a reverse cycle air conditioner as a minor renovation that needs approval. The strata committee can approve it if the scheme's by-laws allow that. Otherwise the owners vote at a meeting, and more than half of the votes cast must be in favour. Your application should include plans, the work dates and times, and the installer's details and qualifications. Wait for the written approval before any wall is drilled.
Can I put an air conditioner in my Sydney rental?
Only with the landlord's written permission, unless your lease already allows it. NSW landlords cannot unreasonably refuse certain minor changes, but air conditioning is not on that list. Ask the landlord to confirm in writing who pays, who owns the unit and who services it. Agree as well whether the unit stays at the end of the lease or the wall is made good after removal.
Why do ducted quotes on the North Shore come in higher than in Western Sydney?
Our NSW ducted pricing puts Western Sydney at about $9,000 to $22,000 and the North Shore and Northern Beaches at about $12,000 to $30,000. Larger homes with more rooms and zones push the price up. Roof access, extra storeys and longer duct runs also add labour. These are 2027 estimates, and a site visit is the only way to price a particular house.
Can the outdoor unit go on the roof of my terrace?
Not as exempt development, because the state standards allow only wall mounted or ground mounted units for homes. A wall mounted unit must also sit no higher than 1.8 metres above ground and at least 450 millimetres from each boundary. A roof position therefore needs a different approval path, so ask your council before booking the install. In a heritage conservation area the unit must also sit at or behind the rear building line. Get the council's answer in writing and give a copy to the installer.
Do I need a written contract for an air conditioning install?
NSW guidance says contracts for specialist work valued at more than $5,000 must be in writing, and air conditioning is specialist work. Below that figure a contract is not required, but a written quote with model numbers is still wise. Jobs over $20,000 fall under the large contract rules, including a cooling-off period of five clear business days. Whatever the price, the installer must hold a NSW air conditioning licence.
Can the condenser sit next to my balcony railing?
The state's exempt standards do allow an outdoor unit on a balcony floor. A solid box beside the railing can act as a step for a young child, though. The Sydney Children's Hospitals Network advises keeping climbable objects away from balcony railings. Ask the installer to set the unit back from the edge, and check your strata by-laws before choosing the spot.
What is the loose-fill asbestos register and does it affect a ducted install?
It is a NSW Government list of homes confirmed to contain loose-fill asbestos insulation. Anyone can search it by address, and a listing also appears on the council's section 10.7 planning certificate. Ducted installs put workers in the roof space, so the result matters before any quote is accepted. Share the search result with every installer so they can plan the work safely. Homes built before 1990 may also contain other asbestos materials worth testing.
Will a large ducted system need three phase power?
Not always, but a big system can draw more than an older single phase supply comfortably carries. An electrician's load assessment, at about $180 to $480 in Sydney, shows whether the supply is enough. If an upgrade is needed, moving to three phase costs about $2,600 to $8,500. Work on the service line and meter must be done by a Level 2 accredited service provider.
Who should give me a CCEW after the install?
The electrician who tested any new wiring must lodge a Certificate of Compliance for Electrical Work. It must be lodged no later than seven days after the test is finished. From 1 July 2026 all of these certificates go through the state's online portal. The electrician can add your email address so a copy reaches you automatically. Keep it with the contract and the unit's manual.
How do I check an installer holds the right licences?
Search the business and the technician on the NSW Government's online licence check for the air conditioning licence. Then search the Australian Refrigeration Council's Look for the Tick register for the refrigerant licence and the business authorisation. The name on the quote should match both records. A full RAC01 licence covers refrigeration and air conditioning work except in cars and other vehicles, while RSS03 is limited to single head split systems under 18 kW.

Sydney Air Conditioning Specialists

For Trades & Contractors - NSW

Air conditioning installs in Sydney often rely on other trades for the parts an installer cannot do. New circuits and switchboards need a licensed electrician, supply upgrades need a Level 2 provider, and older ceilings may need an asbestos test first. These services are booked alongside air conditioning jobs across Greater Sydney.

Compare Sydney Air Conditioning Quotes

Tell us your suburb, the type of home and the rooms you want cooled or heated, and compare quotes from local Sydney installers who are all pricing the same job.

Get Free Air Conditioning Quotes

About This Guide

This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.

Reviewed by The Quote Yard Editorial Team

Published 20 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All NSW tradies are required to hold appropriate licences. Verify at NSW Fair Trading.
Prices are 2027 estimates based on typical Sydney air conditioning rates. Your final price will depend on the units chosen, the pipe length, access at height and any electrical work, so compare written quotes that list units, extras and electrical work separately.
Need work done? Get free quotes. Post a Job – It's Free