Looking for a Fencer in Sydney?
Tell us your suburb and council, the length and height of the fence, the material you want, how many gates you need and whether the ground is rock, clay or sloping. We will pass the same description to local fencers across Sydney, so every quote you receive prices the same job.
Sydney Fencing Price Guide
These are estimated price ranges for 2027, taken from our NSW fencing and timber fence cost guides. Rows marked NSW are statewide figures rather than Sydney ones. Your price depends on the ground, access, height, gates and whether an old fence has to be removed, so compare written quotes for the same job.
Hire a Fencer Sydney NSW - Get Local Quotes
Sydney fences run along every kind of boundary, from narrow terrace back lanes in the inner city to sloping sandstone blocks on the North Shore and wide clay lots in the west. The prices below are 2027 estimates of what Sydney fencers charge. Colorbond steel runs at about $85 to $180 a metre depending on the area, and treated pine paling at about $90 to $150 a metre. Work over $5,000 needs an NSW licence, and set rules cover the contract, the deposit and when the fencer must give you a home building compensation (insurance) certificate. The City of Sydney also controls front fences on terraces and in heritage conservation areas. Fence materials are limited in bush fire prone suburbs, such as those in Hornsby Shire, and Sydney councils charge a fee to certify a pool barrier. In townhouse and villa complexes, strata law decides who counts as the owner of a boundary fence. Tree roots, overhanging branches, old Super 6 fibro sheeting that may contain asbestos, buried pipes and quiet hours for power tools can all affect the job. Near the end are warning signs in a fencing quote and a simple way to compare three written prices for the same fence. Removal, rock and gates are priced as separate items throughout, because those three items explain most of the gap between two quotes for the same boundary. Each rule is drawn from NSW Government, council or regulator sources, so you can check each detail for yourself before you sign a contract.
At a Glance - Sydney Fence Prices, 2027 Estimates
| Job | Price Range | How It Is Charged | What Drives It In Sydney | Who Can Do It |
|---|---|---|---|---|
| Colorbond fence, Western Sydney | $85 - $130 per m | Per metre installed | Clay ground and easy truck access | Licensed fencer |
| Colorbond fence, Inner and Eastern Suburbs | $110 - $170 per m | Per metre installed | Rock, tight access and heritage rules | Licensed fencer |
| Colorbond fence, North Shore and Northern Beaches | $110 - $180 per m | Per metre installed | Sandstone and steep blocks | Licensed fencer |
| Colorbond fence, Hills and North West | $90 - $140 per m | Per metre installed | Larger blocks and longer runs | Licensed fencer |
| Colorbond fence, South and Sutherland | $95 - $150 per m | Per metre installed | Mixed ground from sand to rock | Licensed fencer |
| Treated pine paling, 1.8 m | $90 - $150 per m | Per metre installed | Post spacing and removal | Licensed fencer or carpenter |
| Hardwood paling fence | $150 - $230 per m | Per metre installed | Timber grade and supply | Licensed fencer or carpenter |
| Horizontal slat fence | $180 - $320 per m | Per metre installed | Slat size and gap spacing | Licensed fencer or carpenter |
| Rock excavation | $80 - $200 per post | Per affected post hole | Depth of sandstone | Fencer with rock drilling gear |
| Old fence removal (NSW) | $20 - $40 per m | Per metre removed | Material and tip fees | Fencer |
| Fibro fence removal (NSW) | $80 - $150 per m | Per metre, licensed disposal | Testing and length of run | Licensed asbestos removalist |
| Pedestrian gate (NSW) | $400 - $900 | Per gate | Width and hardware | Licensed fencer |
| Glass pool fence (NSW) | $350 - $650 per m | Per metre installed | Frameless or semi-frameless | Glazier or pool fencer |
What Pushes a Sydney Fence Price Up
Before the First Sydney Fencer Visits
A fencer in Sydney might be replacing a storm-damaged steel run in Penrith, a rotting paling fence behind a Marrickville terrace or a pool barrier in a Cronulla back yard. Each of those jobs carries different costs, approvals and neighbour questions, so it helps to know which kind of job you have before quotes arrive. The focus here is on rules particular to Greater Sydney, such as council fence controls, bush fire prone suburbs, strata boundaries and council pool certificates. The general rules on materials, cost sharing and post depths are explained in our guide to fencing services across NSW. Read the two together, and a Sydney fence quote becomes much easier to judge.
Start by walking the fence line and writing down what you see along it. Note the length in metres, the height you want, the number of gates and whether the ground steps, slopes or shows bare sandstone. Photograph the old fence from both sides if your neighbour agrees, because rot, leaning posts and fibro sheeting all change the price. Check whether a pool, a retaining wall, a large tree or a driveway sits within a metre or two of the line. If an outdoor air conditioning unit stands in the side passage, make sure the new fence leaves room to service it, a point our guide to hiring an air conditioning installer in Sydney also raises. That short written brief lets every fencer price the same job, which is the only fair basis for comparing quotes.
What a Sydney Fence Costs From the West to the Northern Beaches
Colorbond steel fences in Sydney cost roughly $85 to $180 a metre installed as 2027 estimates, but the price depends more on the ground than on the suburb name. Our NSW figures put Western Sydney at about $85 to $130 a metre, while the Inner and Eastern Suburbs sit at $110 to $170 because of rock, tight access and heritage controls. The North Shore and Northern Beaches run highest at about $110 to $180, since sandstone and steep blocks often occur together there. The Hills and North West sit at roughly $90 to $140, and the South and Sutherland area at about $95 to $150. These figures are for a standard 1.8 metre fence, so extra height, gates and removal are priced on top.
Timber is priced the same way, with Sydney treated pine paling at about $90 to $150 a metre and hardwood paling at $150 to $230. Horizontal slat fences run from about $180 to $320 a metre, and feature screen fences from $240 to $450, according to the timber fence cost guide. Rock adds about $80 to $200 for each post hole that hits sandstone, which is why two quotes for the same run can differ by hundreds of dollars. Statewide figures add $20 to $40 a metre to remove an old fence, $80 to $150 a metre for fibro with licensed disposal and $400 to $900 per pedestrian gate.
| Job | Sydney Range | Charged As | What Moves It |
|---|---|---|---|
| Colorbond, Western Sydney | $85 - $130 per m | Per metre installed | Clay depth and footing size |
| Colorbond, Inner and Eastern Suburbs | $110 - $170 per m | Per metre installed | Rock and carrying materials through the house |
| Colorbond, North Shore and Northern Beaches | $110 - $180 per m | Per metre installed | Sandstone and slope |
| Colorbond, Hills and North West | $90 - $140 per m | Per metre installed | Length of run |
| Colorbond, South and Sutherland | $95 - $150 per m | Per metre installed | Sand, clay or rock |
| Treated pine paling, 1.8 m | $90 - $150 per m | Per metre installed | Removal and disposal |
| Hardwood paling | $150 - $230 per m | Per metre installed | Timber grade |
| Horizontal slat | $180 - $320 per m | Per metre installed | Slat width and spacing |
| Feature screen | $240 - $450 per m | Per metre installed | Design and timber |
| Rock excavation | $80 - $200 per post | Per affected hole | Depth of sandstone |
| Aluminium slat (NSW) | $180 - $350 per m | Per metre installed | Profile and powder coat |
| Tubular pool fence (NSW) | $150 - $300 per m | Per metre installed | Gate and latch type |
| Driveway gate only (NSW) | $1,000 - $4,000 | Per gate | Width and swing or slide |
Rock, Slope and Side Access in a Sydney Fence Price
Most Sydney fencers quote a rate per metre for the fence itself and a fixed price for each gate. That rate assumes clear access, posts dug into soil and an old fence that comes down without trouble. When one of those assumptions fails, the quote should say what changes rather than adding the extra later as a variation, a change to the agreed price. A worked example on the NSW fencing guide prices a 20 metre Colorbond run on a flat site at about $1,700 to $3,000, rising to about $2,600 to $4,200 when rock sits 300 millimetres down.
Sandstone is the main reason fences cost more along the northern and eastern side of the city. A post hole that hits rock is drilled out with a core drill or broken out, or a steel base plate is fixed to the rock with chemical anchors, which are bolts set in resin. Hilti makes HIT-HY 200-R V3 injectable mortar, a resin for fixing bolts into solid material, and Ramset makes ChemSet chemical anchors for similar work. Whichever method is used should be named in the quote, along with who decides when the ground counts as rock. Clay in western and south-western Sydney brings the opposite problem, because it digs easily but moves as it wets and dries. A good quote for clay ground shows the hole depth and the concrete used, since shallow footings, the concrete that holds each post, are a common reason a new fence starts to lean.
Access shapes the labour figure as much as the ground does. Terraces and semi-detached houses in the inner city often have no side passage, so posts, sheets and concrete may have to be carried through the house or brought in from a rear lane. Steep blocks on the Northern Beaches can need materials passed down by hand, and sloping runs are either stepped in level panels or raked, meaning angled, to follow the ground. The NSW fencing guide suggests raking a run along a sloping boundary adds roughly 20 per cent to the labour. Ask each fencer how materials will reach the fence line, and whether the price includes taking the old fence to a waste facility.
Where a Sydney Fence Price Grows
Ask for the rock allowance as a dollar figure per post hole, not a vague note.
Check that removal of the old fence appears as its own line in the quote.
The Fencing Licence, and When Glass, Brick or Steel Need Another
In NSW, fencing is a licensed trade, defined as putting up fences and gates within or on residential property boundary lines, whatever the material. A contractor licence is needed to carry out, advertise or contract for that work when labour and materials together come to more than $5,000, including GST. The licence comes as an individual licence, a company or partnership licence, or a qualified supervisor certificate held by the person who oversees the work. Unlicensed work over the threshold can bring a fine of $22,000 for an individual or $110,000 for a company under the Home Building Act 1989. These rules are set out on the NSW Government website, and the number on a quote can be checked on the Verify licence register.
Other licence categories also cover some fences, which matters when a job mixes materials. Carpentry covers timber, brushwood, metal and prefabricated glass fencing, while glazing covers glass and acrylic fencing. Metal fabrication covers metal fencing, and bricklaying covers brick fences and the footings that carry them. A glass pool barrier, a rendered masonry front fence or a welded steel gate may therefore be built by someone whose licence is not called fencing at all. For brick and block fences, our guide to hiring a bricklayer in Sydney covers the masonry side in detail. Whatever the material, the name and number on the licence should match the business named on the quote and the contract.
| Part of the Job | Who Usually Does It | Licence to Check | Ask Before Work |
|---|---|---|---|
| Steel or paling boundary fence | Fencer | Fencing or carpentry, over $5,000 | Name matches the quote |
| Glass pool barrier | Glazier or pool fencer | Glazing or carpentry | Who certifies the barrier |
| Rendered masonry front fence | Bricklayer | Bricklaying | Footing size and brick column height |
| Welded steel gate | Metal fabricator | Metal fabrication | Hinge and latch type |
| Gate motor and power supply | Licensed electrician | Electrical licence | Cable route under paving |
| Fibro fence removal | Asbestos removalist | SafeWork NSW licence over 10 m² | Clearance check after removal |
Contract Paperwork When a Fence Costs Over $5,000
A long boundary or a fence with two gates can pass $5,000 quickly, and from that point NSW law requires a written contract. Jobs from $5,000 to $20,000 need a small jobs contract with the names of both parties, the contractor's licence number and a description of the work. Jobs over $20,000 need a large jobs contract with a 17-item checklist, a schedule of stage payments and a clause on how the contract can be ended. The same rules apply when no price has been agreed but the reasonable market cost of labour and materials passes $5,000. The contractor must also give you a copy of the signed contract within five business days. Ask to see the contract well before the crew arrives, not on the morning the old fence is due to come down.
The deposit can be no more than 10 per cent of the contract price, whatever the size of the fence job. On contracts over $20,000, the contractor cannot ask for a deposit or any other payment until home building compensation cover is in place. Home building compensation, often shortened to HBC, is insurance the contractor arranges, and you must be given the certificate showing that cover. Ask for that certificate before you pay anything, and keep it with the contract.
Large job contracts must also state a cooling-off period, time to change your mind, of five clear business days after you receive a copy. Shared boundary fences need extra care, because two neighbours may be paying one fencer for one fence. In that case, agree in writing who signs the contract and how each owner's share will be invoiced. If only one owner signs, the other owner's share depends on an agreement or an order made through the fencing notice process described later on this page. A simple fence job might have three payment stages, such as the deposit, a payment once posts are set and the balance on completion. Never pay a progress claim, the bill for a finished stage, for work you cannot yet see on site.
NSW Paperwork Thresholds for Fence Work
Front Fences Under the City of Sydney Controls and in Conservation Areas
Side and rear fences up to 1.8 metres, or 1.2 metres in masonry, usually need no council approval under the state's exempt development rules for minor work, which the NSW planning website sets out. That shortcut does not apply to a fence along the road boundary or in the front yard of a heritage conservation area, or on a lot with a listed heritage item. Many terrace streets in the inner city sit inside conservation areas, so a front fence there often needs council approval, and a call to the council's planning team is the place to start. The City of Sydney sets its own fence controls in section 4.1.7 of the Sydney Development Control Plan 2012, the council's detailed design rulebook for assessing applications. In conservation areas, that plan asks owners to retain and repair original fences, or to match their proportions, materials and details when a new fence cannot be avoided. It lists iron palisade, a row of upright bars, on a stone or rendered brick base, timber pickets and timber post and rail as suitable, and treats metal panel and aluminium palisade fences as unsuitable.
Under the City of Sydney plan, front fences should follow the front boundary or the usual fence line in the street, with height measured from the footpath. Solid masonry front fences are limited to 0.9 metres, while open styles such as palisade or picket fences can reach 1.2 metres, with posts and piers, the brick or stone columns, up to 1.5 metres. The fence should step with any change in level along the street, and gates must not open over the footpath or roadway. Side and rear fences are capped at 1.8 metres, but a side fence between the front building line, roughly the front wall of the house, and the front boundary is limited to 1.5 metres. Corner lots may be allowed a higher side fence where it is needed for privacy or security.
| Fence Element | City of Sydney Control | Where It Applies | What to Ask the Fencer |
|---|---|---|---|
| Solid masonry front fence | Up to 0.9 m above the footpath | Houses, terraces and dual occupancies | Where the height is measured from |
| Open front fence | Up to 1.2 m for palisade or picket | Houses, terraces and dual occupancies | Picket spacing and style |
| Posts and piers | Up to 1.5 m | Front fences | Pier heights on a sloping street |
| Side fence forward of the house | Up to 1.5 m | Between the house front and the street | Where the panel height drops |
| Side and rear fences | Up to 1.8 m | Behind the front of the house | Agreed height with the neighbour |
| Gates | Not over the footpath or road | Street boundary | Swing direction and latch side |
| Front fence in a conservation area | Retain, repair or match original | Heritage items and conservation areas | Photos or records the design is based on |
| Unsuitable conservation area fences | Metal panel, concrete block, aluminium palisade | Conservation areas | Material named on the quote |
Bush Fire Prone Sydney Suburbs and Fence Materials
Many Sydney suburbs that back onto bushland, including parts of Hornsby, Ku-ring-gai, the Northern Beaches and the Sutherland Shire, are mapped as bush fire prone land. Hornsby Shire Council explains that a lot counts as bush fire prone if the mapped bushland or the buffer zone around it touches the property. The maps are certified by the NSW Rural Fire Service, and both council mapping and the service's own website show whether your lot is affected. On mapped land, even an exempt fence must be built from non-combustible materials, meaning ones that do not burn, or hardwood. That rules out treated pine paling on many lots where it would otherwise be the cheapest choice. If your lot is mapped, tell each fencer before they quote, so every price is based on the same material.
For new building work, Planning for Bush Fire Protection 2019 is the guideline that councils and building certifiers work from. Section 7.6 of that guideline says fences in bush fire prone areas should be made of hardwood or non-combustible material. Where a fence sits within 6 metres of a building, or on land rated BAL-29 or higher, it should be non-combustible only. BAL stands for bush fire attack level, a rating of how exposed a site is to embers, radiant heat and flame. Hornsby Shire Council's own advice is that any new fences and gates should be built from non-combustible material. Steel, aluminium and masonry fit that description, while timber gates and timber screens close to the house do not.
Fence Materials on Bush Fire Prone Land
Pool Barrier Certificates From Sydney Councils
Many Sydney fence jobs touch a pool, and a fence that forms part of a pool barrier must meet the Swimming Pools Act 1992 as well as any boundary rules. The NSW Government says a pool fence must be at least 1.2 metres high from finished ground level, and where a boundary fence forms part of the barrier it must be 1.8 metres high. Gaps under the fence and between vertical bars must not exceed 10 centimetres, and the 90 centimetre non-climbable zone, where a child could climb, must stay clear of trees, furniture and toys. Every pool must also be listed on the NSW Swimming Pool Register, which owners can do online for free. The detailed measurements and gate hardware are covered in our guides to pool fencing installation and pool fence repairs and compliance.
Selling or leasing a Sydney home with a pool means you need pool certificates. A sale contract must include a registration certificate plus a compliance certificate, a recent occupation certificate or a certificate of non-compliance, and a certificate of non-compliance cannot be used to rent the property out. Randwick City Council notes that a buyer has up to 90 days from settlement to fix a non-compliant barrier, unless the certificate records a significant risk to public safety. Fees differ between councils, so check yours before booking an inspection. Woollahra lists $150 for a first inspection and $100 for a second, while Randwick lists a $250 application fee that covers the first inspection and any reinspections. If tiles or paving around the pool are being replaced, remember that height is measured from finished ground, so coordinate the fencer with hiring a tiler in Sydney.
| Item | Rule or Figure | Source | Fencing Point |
|---|---|---|---|
| Pool fence height | At least 1.2 m from finished ground | NSW Government | New paving can reduce the height |
| Boundary fence used as a barrier | 1.8 m high | NSW Government | Agree any change with the neighbour |
| Gaps under and between bars | No more than 10 cm | NSW Government | Recheck after any landscaping |
| Non-climbable zone | 90 cm kept clear | NSW Government | Keep rails and low ledges out of it |
| Certificate of compliance | Valid for 3 years | NSW Government | Book before a sale or new lease |
| Woollahra inspection | $150 first, $100 second | Woollahra Council | Multi-occupancy pools every 3 years |
| Randwick certificate | $250 including reinspections | Randwick Council | Fix known defects before the visit |
Strata Lots, Townhouses and Boundary Fences
Townhouse and villa complexes are common across Sydney, and their fences raise a question that freestanding houses do not. Section 266 of the Strata Schemes Management Act 2015 treats the owners corporation, the body of all lot owners, as owner of the land under the Dividing Fences Act 1991. In plain terms, a fencing notice about the outer boundary of a strata scheme goes to the owners corporation, not to the lot owner whose courtyard happens to sit beside it. You usually reach the owners corporation through the strata manager or the committee secretary. That section does not apply to land in a community scheme, which follows its own arrangements.
Fences inside a scheme, such as one between two courtyards, need a different check. Whether that fence belongs to a lot or to common property depends on the strata plan and the by-laws, the scheme's own rules, so ask the strata manager before you book a fencer. Common property is the part of a strata scheme owned by all owners together, such as shared driveways and gardens. NSW Fair Trading notes that renovations affecting common property may require a change to the scheme's by-laws.
NSW Fair Trading groups strata renovations into cosmetic work, minor renovations and major renovations. Minor renovations need approval by more than 50 per cent of the votes cast at a strata meeting. Major renovations need a special resolution, which passes when no more than 25 per cent of the value of votes cast are against the work. If the work changes the structure, the owner must give 14 days' written notice before it starts. Which category a new courtyard fence falls into depends on the work and the scheme's by-laws, so get the committee's view in writing. Keep a copy of any approval with the fencer's contract so the scope matches what the meeting approved.
Fences in a Strata Scheme
Fencing Notices and NCAT Conciliation for Sydney Neighbours
Most boundary fences in Sydney are shared, and the Dividing Fences Act 1991 generally splits the cost of a sufficient fence, meaning one that reasonably separates the two properties, equally between adjoining owners. The steps for serving a notice, judging a sufficient fence and handling urgent repairs are explained in our guide to hiring a fencer on the Central Coast, and apply in Sydney too. A fencing notice is a written notice to your neighbour describing the boundary, the type of fence proposed and the estimated cost. If you cannot agree within a month of serving it, either owner can apply to the Local Court or to the tribunal.
The NSW Civil and Administrative Tribunal requires the fencing notice to be served at least one month before you apply, and the notice must be attached to the application. Its guidance suggests adding photos or diagrams, receipts, a current boundary survey if you have one and any witness statements. Dividing fence matters are first listed for conciliation and hearing, a guided discussion that gives both neighbours a chance to settle before a contested hearing. Concession card holders may pay a reduced fee if they show their card when lodging. NCAT can make orders about the fence's material, height, location and timing, and about how the cost is split.
Get two or three written quotes for the same fence first, because the notice needs an estimated cost that your neighbour can check. Agree on the colour and on which side the rails will face, since some fences look different from each side. Lysaght makes Smartascreen, a Colorbond steel fence designed to look the same from both sides, and Stratco makes Good Neighbour steel fencing. If the exact line is in doubt, a registered surveyor can peg the boundary before the old fence comes down.
From Notice to Tribunal
Tree Roots, Overhanging Branches and Shared Fences
The City of Sydney gives tree roots or branches damaging a shared fence as an example of a dispute between neighbours. It also explains that councils cannot step in to resolve tree disputes or order a resident to prune a tree that affects a neighbour. If talking fails, the next step is the Land and Environment Court, which can make orders to fix, stop or prevent damage and may order compensation. You can apply only after making a reasonable attempt to sort the problem out with your neighbour. Keep photos of the damaged fence and copies of any letters, since they show that the attempt was made. A fencer quoting beside a large tree should also explain how the new post holes will avoid its main roots.
Pruning is regulated too, even when the branches hang over your side of the fence. In the City of Sydney, you must apply for permission to prune overhanging branches from a neighbour's tree, and the council gives your neighbour 14 days to comment. The permit covers work from your own property only, so it does not let a fencer or arborist step onto the neighbour's land. Light pruning that removes no more than 5 per cent of the leafy crown can be exempt, but it must follow the Australian Standard and use a qualified arborist, a trained tree worker. Other Sydney councils set their own tree rules, so check with yours before a fencer cuts large roots for new post holes. For bigger trees, start with finding an arborist in Sydney or our page on tree removal, and for hedges along a new fence line, see our guide to hiring a gardener in Sydney.
| Situation | What the Rule Says | Who Decides | Before the Fencer Starts |
|---|---|---|---|
| Roots lifting a shared fence | Orders for repairs or compensation | Land and Environment Court | Photos and letters to the neighbour |
| Branches over the fence line | Permit needed to prune in the City of Sydney | Council | Neighbour has 14 days to comment |
| Light pruning | Exempt up to 5% of the canopy | Qualified arborist | Work follows the Australian Standard |
| Roots in a new post hole | Council tree rules apply | Your council | Ask before cutting large roots |
| Neighbour will not act | Council cannot order pruning | Court, after a real attempt | Keep a record of contact |
| Pruning from the neighbour's side | Only the neighbour can allow it | The neighbour | Written consent before entry |
Super 6 Sheeting and Asbestos Along Older Sydney Boundaries
Homes built before the late 1980s may contain asbestos, and SafeWork NSW includes "Super 6" fencing among its examples of asbestos found outside the home. These corrugated fibro sheets should be treated as asbestos until a test says otherwise. SafeWork NSW says high-pressure water spray and compressed air should never be used on asbestos, which rules out pressure cleaning an old fibro fence before painting it. A licence is needed to remove more than 10 square metres of non-friable asbestos, meaning bonded sheeting that does not crumble by hand, and a 1.8 metre fence passes that area within six metres. SafeWork NSW also recommends a licensed asbestos professional to assess or remove any amount.
The safe order of work is testing, then licensed removal, then the new fence, so book asbestos testing and inspection before comparing quotes for the replacement. The removal process is described in our guide to asbestos fence removal, and a clearance inspection, a check that no asbestos is left, is required after licensed removal before the area is used again. If a householder transports more than 100 kilograms or 10 square metres of asbestos waste, the NSW EPA asks for a form recording the docket number from the waste facility that accepted it. A home old enough to have a fibro fence may also have asbestos indoors, which our guide to hiring a bathroom renovator in Sydney discusses for wet areas.
| Finding | Rule | Who Handles It | What to Get |
|---|---|---|---|
| Corrugated fibro fence | Treat as asbestos until tested | Asbestos assessor | Test result in writing |
| Non-friable sheeting over 10 m² | Licence required | Licensed removalist | Licence number on the quote |
| Cleaning an old fibro fence | No high-pressure water or compressed air | Nobody, the method is banned | Leave it until removal |
| Licensed removal finished | Clearance inspection before reuse | Arranged after removal | Clearance paperwork |
| Householder carting over 100 kg | EPA form with docket number | Householder | Disposal docket kept |
Noise Hours, Concrete Slurry and Buried Pipes on a Fence Job
Post hole augers, concrete mixers, saws and nail guns are all noisy, and NSW noise rules for homes cover power tools. The NSW EPA's neighbourhood noise guidance says power tools should not be heard inside a neighbour's home before 8 am or after 8 pm on weekends and public holidays. On other days, the quiet hours run until 7 am and start again at 8 pm. Building construction noise is a matter for your council, so check its rules before a crew books an early weekend start. Stihl makes the BT 131 petrol earth auger and Paslode makes Impulse cordless nailers, the kind of tools you may hear on a fence job. Telling neighbours the dates in advance is advice the NSW EPA gives for any noisy work.
Concrete for post footings is usually mixed on site, and the washout water and leftover wet cement, called slurry, should be caught rather than hosed into the gutter. Before any post hole is dug, the fencer should order free plans through Before You Dig Australia, because Sydney Water says its wastewater and stormwater pipes can run through private property. Its guidance is to dig by hand until all services are located, and to call 13 20 90 at any hour if a pipe is damaged. Where a new fence meets a driveway or path, hiring a concreter in Sydney may be the better way to cut and patch the slab. Husqvarna makes the K 4000 power cutter, a saw used on concrete, and cutting should use water or a dust extractor to keep dust down. Ask whether the crew will take dug-out soil and slurry away or leave it on site for you.
Quiet Hours and Site Care
Choosing Steel, Timber or Glass for Sydney Conditions
BlueScope makes Colorbond steel, and its fencing range comes in 15 colours, with the steel sheets, posts and rails generally the same colour on both sides. That suits a shared boundary, but painting one side to suit a different colour scheme is less durable and voids the warranty on the painted parts. BlueScope also advises hosing Colorbond fences down at least every six months, and more often in coastal areas. For homes near the harbour or the ocean beaches, ask the fencer which steel and fixings suit a coastal site and how often the fence should be washed. Aluminium slat fences cost about $180 to $350 a metre across NSW, and they suit owners who want a more open, screened look.
Timber fences need more upkeep, and the finish matters as much as the species of timber. Cabot's makes Deck & Exterior Stain in water-based and oil-based versions, which it lists for fencing. Intergrain makes NaturalStain, a water-based stain the maker lists for fences and for timbers such as treated pine and spotted gum. Dulux makes Weathershield exterior paint, which it recommends for repainting picket fences. A fencer may apply the finish or leave it to you, so the quote should say which and when the timber can be coated. If the finish is left to you, the cost of coating a new fence is set out in our guide to fence painting.
Glass pool barriers are a different product again, built from toughened safety glass held in spigots, which are short metal posts, or in channels. Viridian makes VTough toughened safety glass, which it lists for balustrades, the glass safety panels on balconies and stairs, among other uses. Gates are often the weak point of a pool barrier, so check that the latch and hinges are named on the quote. D&D Technologies makes MagnaLatch magnetic gate latches, TruClose gate hinges and SureClose hinge-closers for gates that must swing shut on their own.
| Product | Made By | Suits | Care Point |
|---|---|---|---|
| Smartascreen steel fence | Lysaght | Shared boundaries | Same look on both sides |
| Good Neighbour fencing | Stratco | Shared boundaries | Match the profile for repairs |
| Colorbond steel | BlueScope | Steel fence sheets and rails | Hose down every six months |
| NaturalStain | Intergrain | Timber fences | Recoat as the maker directs |
| Deck & Exterior Stain | Cabot's | Timber fences | Water or oil based |
| MagnaLatch and TruClose | D&D Technologies | Pool and garden gates | Test that the gate shuts itself |
Defects After the Fence Is Finished
NSW statutory warranties, the protections set by law, on residential building work run for six years for major defects and two years for all other defects, counted from completion. A leaning run of posts, sheets lifting in the wind or a gate that will not latch should be raised with the fencer in writing as soon as you notice it. If that does not fix the problem, Building Commission NSW offers a dispute resolution service, but both the homeowner and the contractor must agree to take part. An inspector can meet both sides on site, and where the work is found to be the contractor's responsibility, a rectification order, a formal direction to fix the work, can set a date for repairs. Complaints must be lodged and finalised before the statutory warranty period runs out, so do not wait.
If agreement still cannot be reached, a home building claim can go to the tribunal. Fence posts that fail because a nearby retaining wall is moving may need a structural engineer to inspect, since the Dividing Fences Act does not cover retaining walls. Keep the contract, the compensation certificate, photos and every message about the defect in one folder. Those records make it far easier for an inspector or the tribunal to see what was agreed.
What to Look Out For Before a Fencer Digs the First Post Hole
Start with the paperwork, since a vague quote is hard to hold anyone to later. Check that the licence number belongs to the business named on the quote, and that the licence covers fencing or the right material category. A deposit above 10 per cent, or any deposit on a job over $20,000 before you see the compensation certificate, is a reason to stop. Be wary of a cash price with no written quote, since you lose the record you would need for a warranty claim. Doorknockers who appear after a big storm deserve the same checks, however urgent the damage looks.
Next, read the scope of work line by line. The quote should state the fence height, material, colour, post spacing, footing depth and the number and type of gates. It should say whether removal of the old fence is included, and whether a fibro fence has been tested or excluded. Look for a rock allowance on sandstone ground and a note on how a slope will be stepped or raked. Check who is responsible for approvals on a heritage street or a bush fire prone lot. Compare each figure with our NSW guides to fence and gate installation and garden fence installation costs, and query anything far outside them.
Quote Checks for a Sydney Fence
A quote that never mentions removal can grow once the old fence comes down.
Ask who confirms the boundary line before any posts are dug.
Getting Three Fencing Quotes for One Sydney Boundary
Send every fencer the same brief, with the length, height, material, colour, gates and photos of the old fence and the ground. Ask them to price removal, rock, gates and any pool barrier work as separate lines, so the totals can be compared item by item. If a neighbour is sharing the cost, send the quotes to them as well, since the fencing notice needs an estimated cost both owners can see. Prices in different parts of Sydney vary with ground and access, so compare quotes for your own block rather than a friend's job across the city. A quote well below the others usually leaves something out, so ask what it excludes before you accept it.
Ask how long each price holds and when work can start, since waiting times grow after storms bring down many fences at once. For brick and block fences, see our guide to brick fences and walls, and for motorised gates, see automatic gate and driveway gate installation. If you are about to move house, time the fence job so the side gate is in place before hiring a removalist in Sydney brings a truck to the door. A firm start date matters most when a pool barrier is out of action or a dog needs to stay in.
Once the fence is up, walk the line with the fencer before the final payment. Check that posts are plumb, that panels follow the agreed steps or rake, and that gates swing freely and latch every time. Make sure the old fence, offcuts and concrete waste have gone, and that the neighbour's side has been left tidy. Keep the contract, invoices, product names and colours in one place, since you will need them to match a damaged panel years later. Garden beds disturbed along the fence line can be restored by a landscaper, and our guide to hiring a landscaper in Sydney explains how that work is priced. With the paperwork filed and the gates latching, the job is properly finished.
Fencers Across Sydney
Fencing prices on this page apply across Greater Sydney. Rock, slope and access change the rate far more than distance, although some fencers add a travel charge for jobs on the outer fringe.
▶ Sydney 30 areas
▶ Central Coast 24 areas
▶ Blue Mountains 22 areas
▶ Illawarra 30 areas
▶ Southern Highlands 24 areas
▶ South Coast 28 areas
Sydney Fencer FAQ
How high can a front fence be on a City of Sydney terrace?
Can I build a treated pine fence on bush fire prone land in Sydney?
Who gets the fencing notice when the property next door is a strata complex?
What does a Sydney council charge for a pool barrier certificate?
Can I cut back my neighbour's tree branches to build a new fence?
How much extra will rock add to a fence in Sydney?
What hours can a fencing crew use power tools near my home?
Does a Sydney fencer need a licence for a small job?
Can an old Super 6 fibro fence be pressure cleaned and painted instead of replaced?
Who can help if my new fence starts leaning within a year?
Sydney Fencing Specialists
Related Services
For Trades & Contractors - NSW
Fencing in Sydney often relies on other trades for the parts a fencer cannot do, from gate motors and power to masonry piers and asbestos removal. You can hire those trades through the links below, and the jobs board lists open roles for tradespeople across NSW.
Compare Sydney Fencing Quotes
Tell us your suburb and council, the length and height of the fence and the material you want, and compare quotes from local Sydney fencers who are all pricing the same job.
Get Free Fencing QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.