Looking for a Bathroom Renovator in Sydney?
Tell us your suburb, whether the home is a house or a strata unit, the rough size of the bathroom, and which fixtures stay or go. We will pass the same description to local bathroom renovators across Sydney, so every quote you receive prices the same job.
Sydney Bathroom Renovation Price Guide
These are estimated Sydney price ranges for 2027. Your price depends on the size of the room, whether fixtures move, what lies behind the old tiles, the products you choose, and any strata conditions on the building.
Hire a Bathroom Renovator Sydney NSW - Get Local Quotes
Sydney bathrooms range from 1960s rooms in brick veneer houses to compact ensuites in apartment towers, and each type has its own rules to check before any old tiles come off. A house renovation that keeps the same layout can often go ahead without a council application. An apartment bathroom is different, because NSW strata law treats it as a major renovation that needs a special resolution, a formal vote of the owners, first. Most jobs combine several licensed trades, since plumbing and electrical work need a licence at any value, while waterproofing, tiling and renovation work need one above $5,000. The membrane, the waterproof layer under the tiles, must meet the wet area rules in the National Construction Code, and a failed one is the costliest fault to fix later. Homes built or renovated before the late 1980s may hide asbestos sheeting behind old tiles, so have it tested before demolition starts. Any new or replacement hot water service must deliver no more than 50 degrees at the shower and basin under a NSW rule. Contracts over $5,000 must be in writing, and those over $20,000 need home building compensation cover, a type of insurance, before any deposit is paid. Many Sydney homes have only one bathroom, so the time the room is out of use matters almost as much as the price. The prices on this page are 2027 estimates drawn from our NSW bathroom renovation and cost guides. Post your job on The Quote Yard and we will connect you with local bathroom renovators across Sydney who can quote on it.
At a Glance - Sydney Bathroom Renovator Prices, 2027 Estimates
| Job | Price Range | How It Is Charged | What Drives It In Sydney | Who Can Do It |
|---|---|---|---|---|
| Cosmetic refresh | $5,500 - $13,500 | Fixed after site visit | Fixtures replaced, tiles kept | Renovator or individual trades |
| Standard full renovation | $15,000 - $28,000 | Fixed contract price | Room size, finishes and access | Licensed bathroom renovator |
| Premium or large bathroom | $25,000 - $50,000 | Fixed contract price | Stone, joinery and layout changes | Licensed renovator or builder |
| Small ensuite renovation | $8,000 - $18,000 | Fixed contract price | Shower size and tile choice | Licensed bathroom renovator |
| Strip-out and demolition | $2,500 - $5,000 | Fixed fee | Tile layers, lifts and parking | Renovator or demolition crew |
| Asbestos assessment | $300 - $600 | Fixed fee | Number of samples taken | Licensed asbestos assessor |
| Asbestos removal | $1,500 - $4,000 | Fixed fee | Sheet area and condition | Licensed asbestos removalist |
| Waterproofing, standard bathroom | $2,500 - $5,000 | Fixed fee | Timber or slab floor, shower type | Licensed waterproofer |
| Like-for-like plumbing | $4,000 - $8,000 | Fixed after site visit | Pipe age and fixture count | Licensed plumber |
| Moving fixtures | $3,000 - $8,000 extra | Added to plumbing | Slab or timber floor, drain slope | Licensed plumber |
| Tiling labour, standard tiles | $65 - $120 per m² | Per square metre | Tile size, pattern and niches | Licensed tiler |
| Electrical work | $1,500 - $4,000 | Fixed after site visit | Lights, fan, heating and circuits | Licensed electrician |
| Waste and tip fees | $500 - $1,200 | Per job | Volume and type of rubble | Renovator or skip bin hire |
What Pushes a Sydney Bathroom Bill Up
Starting a Bathroom Renovation in a Sydney Home
Bathroom renovators in Sydney usually price a full job as one fixed sum after a site visit, because no two rooms hide the same problems behind the tiles. That sum brings together demolition, waterproofing, plumbing, electrical work, tiling, fixtures and rubbish removal, often carried out by four or five separate licensed trades. Statewide price ranges and the usual order of those trades are in our NSW bathroom renovation guide, while the advice here is for Sydney owners. Those questions start with the building itself, since a strata unit, a heritage terrace and a 1970s brick veneer house each follow different approval paths. Working out which path applies to your home is the right first step, well before anyone is asked to quote.
Write a short brief before the first renovator visits, so that every business prices the same room. Note the rough size of the bathroom, whether the toilet, shower, vanity and bath stay where they are, and which fixtures you want replaced. Record the year the home was built or last renovated, since that tells you how likely it is to contain asbestos. Owners in a strata scheme should also find the building's by-laws, the scheme's own rules, and the strata manager's contact details before accepting any quote. Photos of the room, the ceiling, the hot water system and the switchboard help a renovator spot extra work early. A budget range gives each business a fair chance to say what fits within it and what could wait for later.
Sydney Bathroom Renovation Prices by Area, 2027 Estimates
Prices across Greater Sydney follow the statewide pattern, but the inner city and the eastern and northern suburbs sit at the top of each range. Our NSW guide lists a standard full renovation at about $17,000 to $28,000 in the inner city, against about $15,000 to $24,000 in Western Sydney. Cosmetic refreshes that keep the tiles and layout run from about $5,500 to $13,500 across the city, while premium or large rooms reach about $50,000. Small ensuites cost about $8,000 to $18,000, since a compact shower still needs all the same waterproofing and plumbing steps. All of these figures are 2027 estimates that assume normal working hours, reasonable access and no surprises behind the walls.
Access explains part of the gap between suburbs, because a tower unit with one shared lift takes longer to strip than a single storey house. Parking, building rules on work hours and protection for common corridors all add time, and that time is charged in the price. A breakdown by room type sits in our bathroom renovation cost guide, and compact rooms are covered in small bathroom renovation costs. Use the table below as a quick check on whether a Sydney quote sits roughly where it should.
| Sydney Area | Cosmetic Refresh | Standard Renovation | Premium or Large |
|---|---|---|---|
| Inner city, such as Surry Hills and Zetland | $6,500 - $13,500 | $17,000 - $28,000 | $28,000 - $50,000 |
| Eastern Suburbs, such as Bondi and Randwick | $6,500 - $13,000 | $17,000 - $27,000 | $28,000 - $48,000 |
| Inner West, such as Leichhardt and Newtown | $6,000 - $12,500 | $16,000 - $26,000 | $26,000 - $46,000 |
| Lower North Shore, such as Mosman | $6,500 - $13,000 | $17,000 - $27,000 | $28,000 - $48,000 |
| Northern Beaches, such as Manly and Dee Why | $6,200 - $12,800 | $16,500 - $26,500 | $27,000 - $47,000 |
| Western Sydney, such as Parramatta and Penrith | $5,500 - $11,500 | $15,000 - $24,000 | $25,000 - $43,000 |
| South-west, such as Liverpool and Campbelltown | $5,500 - $11,500 | $15,000 - $23,500 | $25,000 - $42,000 |
| Hills District, such as Castle Hill | $5,800 - $12,000 | $15,500 - $25,000 | $26,000 - $44,000 |
| Sutherland Shire, such as Miranda and Cronulla | $5,900 - $12,200 | $16,000 - $25,500 | $26,000 - $45,000 |
Where the Money Goes Inside One Sydney Bathroom
A fixed price is easier to judge once you know the typical cost of each stage behind it. Stripping out a typical family bathroom in metropolitan Sydney costs about $2,500 to $5,000, and tip fees for ordinary building waste add about $500 to $1,200. Waterproofing that meets the rules on a standard bathroom runs about $2,500 to $5,000, and a timber floor adds roughly $1,000 to $2,000 compared with a concrete slab. Like-for-like plumbing replacement costs about $4,000 to $8,000, and moving fixtures to new positions adds roughly $3,000 to $8,000 more. Tiling labour for standard ceramic or porcelain tiles runs about $65 to $120 per square metre, rising to about $100 to $180 for large tiles or natural stone. Electrical work covering lights, an exhaust fan and any heating typically adds $1,500 to $4,000.
Fixtures are extra to those stages, and their cost depends almost entirely on what you choose. A standard 750 to 900 millimetre wall-hung vanity with a basin costs about $800 to $2,500, while a fully frameless shower screen costs about $1,200 to $3,500 installed. If you have not picked a fixture yet, some quotes carry a prime cost allowance, a placeholder sum that is adjusted once the real price is known. Check that each allowance suits the products you actually want, or the final bill will move once you choose.
Older Sydney homes almost always produce at least one surprise once the old tiles come off. Rotten timber under a leaking shower, corroded galvanised steel pipes and asbestos sheeting are the most common ones. Our NSW cost guide suggests setting aside a reserve of 10 to 15 per cent of the project cost for problems like these. Agree in the contract how a hidden problem will be priced, including the hourly rate or fixed fee for the extra work. Any change to the agreed work must then go in a written variation that you both sign and keep with the contract, before the extra work goes ahead.
Reading a Sydney Bathroom Price Line by Line
Electrical work for a typical bathroom adds about $1,500 to $4,000 on top.
Fixtures are priced separately and depend entirely on the products you choose.
One Bathroom, Several Licences: Who Must Hold What
NSW has a licence class called kitchen, bathroom and laundry renovation, which covers installing, refurbishing, restoring and repairing those rooms on site. It does not cover work on load bearing parts of the building, such as structural walls, floors or beams, which belongs with a licensed builder. A contractor licence in this class is needed once labour and materials together exceed $5,000, with GST counted in that figure. Specialist work inside the job, meaning plumbing, drainage, gasfitting and electrical work, must be handed to a subcontractor licensed for that work. That specialist work needs a licence regardless of its cost, so even one new power point or a relocated tap counts.
Waterproofing and wall and floor tiling are separate trade classes, and each needs a contractor licence above the same $5,000 threshold. Renovators who hold the bathroom class often subcontract these steps, so ask who will lay the membrane and who will lay the tiles. Building Commission NSW manages these licences, and the online licence check shows the holder's name, categories, expiry date, conditions and any public warnings. Confirm the licence is held by the same business whose name is printed on the quote, because a licence held by an individual does not let that person's company sign the contract. For more on the tiling stage, see our guide to hiring a tiler in Sydney. To learn what a plumbing licence covers, read our guide to hiring a plumber in Sydney.
| Part of the Job | Licence Class | When Needed | Check Before Work |
|---|---|---|---|
| Overall bathroom renovation | Kitchen, bathroom and laundry renovation | Over $5,000 incl GST | Licence name matches the quote |
| Structural walls, floors or beams | General building work | Over $5,000 incl GST | Builder named for structural changes |
| Waterproofing membrane | Waterproofing | Over $5,000 incl GST | Membrane installer named |
| Wall and floor tiles | Wall and floor tiling | Over $5,000 incl GST | Tiler named in the contract |
| Pipes, drains and gas | Plumbing, draining and gasfitting | Any value | Notice of Work where required |
| Lights, power, fan and heating | Electrical | Any value | Compliance certificate (CCEW) within seven days of testing |
Written Contracts, Deposits and Compensation Cover
Bathroom renovations in Sydney almost always pass $5,000, so a written contract is almost always needed. Jobs between $5,000 and $20,000 need a small job contract, while anything above $20,000 needs a large job contract with more detail. A standard full renovation at Sydney prices usually lands in the large contract group, which brings extra protections for the owner. Those protections include a progress payment schedule and a cooling-off period of five clear business days after you sign, in which you can still pull out.
NSW caps the deposit at 10 per cent of the contract price, whatever the size of the job. On contracts over $20,000, pay nothing until the renovator gives you a home building compensation certificate, proof of insurance if the builder dies, disappears or goes broke. You can confirm a certificate is valid by contacting the insurer or by using the HBC Check service. The renovator must also give you a copy of the signed contract within five business days. Keep the certificate with the contract, since it matters most if something goes wrong years later.
Progress payments on a contract over $20,000 must follow a written schedule, and each payment must match work actually carried out. A sensible bathroom schedule ties payments to stages you can see, such as demolition, rough-in, waterproofing, tiling and fit-off. Rough-in means running the pipes and cables inside the walls before they are closed, and fit-off means connecting the fixtures at the end. Ask for dated photos of the membrane and the rough-in before they are covered, since nobody can inspect them after tiling. Leave a meaningful final payment so the crew still has a reason to come back for small fixes. Money paid before the work is done can be lost if the business stops trading halfway through the job.
NSW Contract Rules on a Bathroom Job
Apartment Bathrooms Count as Major Strata Renovations
Owners of a Sydney unit face an extra step that house owners do not, because NSW strata rules treat bathroom renovations as major renovations. The NSW Government's strata guidance lists bathroom renovations as an example, and it says any change that requires waterproofing is major work. Major renovations need a special resolution at an annual general meeting or another general meeting of the owners corporation, the body made up of all lot owners. A special resolution passes when no more than 25 per cent of the value of votes cast, weighted by each lot's share of the scheme, are against it. Where the work changes the structure, you must also give the owners corporation 14 days' written notice before work starts. That meeting timetable can add weeks or months, so start the strata process before booking a renovator's start date.
The resolution must state who will maintain the affected common property, the parts owned by all owners together, either the owners corporation or the lot owner. In many buildings the slab and the shared pipes are common property, so that clause can matter for decades after the renovation. By-laws may also set conditions on lift use, working hours, noise and rubbish removal, and ask for each trade's licence and insurance details. Lift bookings and corridor protection work much as they do on moving day, as explained in our guide to hiring a removalist in Sydney. Renovating without approval can leave you paying to put the property back the way it was, as the NSW Government strata guidance warns.
An application to the owners corporation moves faster when it arrives complete. NSW guidance for minor renovations asks for plans, dates and times, and the details and qualifications of the tradespeople, and a major renovation proposal benefits from the same detail. Explain how rubbish will leave the building and how lifts and shared corridors will be protected while the work runs. A strata manager can then put the proposal on a meeting agenda without going back to you for more information. Ask the manager early what the by-laws require, since some buildings set their own conditions on top of the state rules.
| Type of Work | Examples | Approval Needed | Bathroom Point |
|---|---|---|---|
| Cosmetic work | Painting, carpet and blinds | No approval | Only where no waterproofing is involved |
| Minor renovation | Kitchen cupboards, hard floors, wiring | More than 50 per cent of votes cast | Cannot include waterproofing |
| Major renovation | Bathroom renovations, structural changes | Special resolution at a general meeting | No more than 25 per cent against |
| Structural change | Moving a structural internal wall | Special resolution and notice | 14 days written notice first |
| Ongoing upkeep | Common property touched by the work | Set out in the resolution | Owners corporation or lot owner |
| Work without approval | Any of the above | None obtained | Owner may pay to reverse it |
Work Hours, Noise and the Neighbours Next Door
Demolition is the loudest part of a bathroom job, and in a Sydney apartment the noise carries straight through shared walls and slabs. The City of Sydney asks site managers outside the city centre to work 7.30am to 5.30pm on weekdays and 7.30am to 3.30pm on Saturdays. It asks for no work on Sundays or public holidays anywhere in its local area. Strata by-laws can set tighter hours again, so check both before agreeing a timetable with the renovator.
Randwick City Council notes that hours set in a development consent do not apply to minor renovation work classed as exempt development, meaning it needs no council approval. Noise limits on power tools still apply under the state noise rules, whatever approval path the work follows. Blacktown City Council lists power tools and compressors as restricted at homes from 8pm to 7am on weekdays, and from 8pm to 8am on weekends and public holidays. A short note to neighbours with the start date and the noisiest days usually prevents complaints. If a dispute does arise, the City of Sydney asks people to contact the site first, then the council if that fails.
Hours That Shape a Sydney Bathroom Timetable
Shower Waterproofing Under AS 3740 and the NCC
Waterproofing is the layer under the tiles that stops water reaching the floor, the walls and the home or unit below. The National Construction Code, the national set of building rules published by the Australian Building Codes Board, requires wet areas to comply with AS 3740, the Australian Standard for waterproofing them. Under its housing provisions, the shower floor must be waterproof, including any hob or step-down, and the shower walls must be waterproof to at least 1,800 millimetres. A hob is the raised lip at the shower entry, while a step-down is a shower floor set lower than the rest of the room. An unenclosed shower, one without a screen or hob, needs a waterstop, a strip that stops water spreading across the floor, at least 1,500 millimetres from the shower head, or rose.
Where the bathroom floor is timber, particleboard or plywood, the rule changes and the whole floor must be waterproof rather than merely water resistant. ARDEX makes waterproofing membranes and tile adhesives for wet areas, so the product name should appear on the quote. LATICRETE makes waterproofing, adhesives and grout for tiled bathrooms. Mapei makes waterproofing products and grouts, so ask which system the waterproofer will use. Ask the waterproofer to show you where the membrane turns up the walls and around the floor drain before any tiles go on. Read more about the membrane stage in our guide to bathroom waterproofing, or find specialists through hiring a waterproofer in Sydney.
Tiles and grout are not waterproof on their own, which is why the membrane underneath does the real work. Water that gets past a cracked grout line above a failed membrane can soak into the framing or the slab for months before anyone notices. In an apartment that water can reach the unit below, which turns a private defect into a strata problem. Spending more on a careful membrane and less on a premium tile is usually the safer choice.
| Area | Rule | Source | What to Ask |
|---|---|---|---|
| Shower floor | Waterproof, including any hob or step-down | NCC Housing Provisions | Membrane name and number of coats |
| Shower walls | Waterproof to at least 1,800 mm | NCC Housing Provisions | Height shown in dated photos |
| Unenclosed shower | Waterstop at least 1,500 mm from the rose | NCC Housing Provisions | Where the waterstop sits |
| Timber or plywood floor | Whole room floor waterproof | NCC Housing Provisions | Extra cost shown separately |
| Concrete or fibre cement floor | Water resistant outside the shower | NCC Housing Provisions | Treatment named in the quote |
| All wet areas | Comply with AS 3740 | National Construction Code | Record of the work at handover |
When a Sydney House Bathroom Needs No Council Approval
Inside a house, most bathroom renovations that keep the room's shape can go ahead as exempt development, minor work that needs no council application. The state planning policy for exempt and complying development, known as the Codes SEPP, lists renovating bathrooms and replacing sanitary fixtures among exempt internal alterations. Sanitary fixtures are the toilet, basin, shower and bath that connect to the drains. The work must not change the shape of a room, for example by removing a wall, and must not reduce the size of a window or doorway. It must also leave the building's load bearing capacity, fire resisting parts and exits unaffected.
The exemption does not apply on or in a heritage item or a draft heritage item, which rules it out for some inner Sydney terraces and villas. Owners of a listed property should ask the council what approval applies before the renovator orders any materials. Councils such as Woollahra have a duty planner, a council planner who takes public enquiries, who can answer that question for a particular lot. Work that removes a wall or changes the structure usually needs a complying development certificate, a fast approval against set standards, or a full development application. Both routes add fees and weeks to the timetable, so settle the layout before asking for final quotes. The licence, contract and waterproofing rules still apply in full even when no approval is needed.
Fire resisting parts matter most in apartments, where walls and floors often separate one home from the next. A new pipe or fan duct cut through one of those elements can take the work outside the exemption altogether. Ask the renovator to confirm that no new holes will pass through a separating wall or slab without the right approval. In strata buildings this check comes on top of the owners corporation vote, so raise both questions with the renovator early.
Approval Paths for a Sydney Bathroom
Plumbing Paperwork, Sewer Diagrams and Sydney Water Records
Plumbing work in a Sydney bathroom comes with its own paperwork, separate from the renovation contract. Before starting most work, the plumber lodges a Notice of Work, a form describing the plumbing and drainage job, with Building Commission NSW. Minor work such as replacing tapware or an existing hot water system is exempt from that notice. At the end, the plumber gives you a Certificate of Compliance confirming the work meets the plumbing laws and the Plumbing Code of Australia. That certificate also goes to Building Commission NSW, which handles plumbing inspections across Sydney through its online portal, the MyInspections Gateway.
Drainage changes, such as moving a toilet or a floor waste, also produce a Sewer Service Diagram showing where the private sewer pipes run. A floor waste is the drain set into the floor that catches overflow and shower water. Sydney Water holds sewer service diagrams for properties in its area, and copies are available through its online Tap in service. Getting the existing diagram before quoting helps a plumber see where the drains run and whether a new layout is practical. Our guide to bathroom renovation plumbing explains the rough-in and fit-off stages in more detail.
Fixture choices also shape the plumbing price, since a new position or a concealed cistern, a toilet tank hidden in the wall, changes the rough-in. Caroma makes toilets for Australian homes, and matching the new toilet pan, the bowl, to the existing drain position avoids moving pipes in the floor. Methven makes showers and tapware, and a wall mixer, which blends hot and cold through one handle, needs its body set in the wall before the tiler starts. GROHE makes shower thermostats and mixers, so confirm the chosen model with the plumber before the wall linings go on.
Some older Sydney houses still have galvanised steel water pipes, which corrode on the inside over the years. While the walls are open, replacing old pipework as far back as is practical costs far less than finding and fixing a leak behind new tiles later. Ask the plumber to price that option as a separate line, so you can decide on the day the old wall sheets come off. The quote should also name the replacement pipe material, so you know exactly what is going into the walls. Pipework hidden behind a finished wall is expensive to reach, so this is the moment to deal with it.
Plumbing Papers to Collect
The 50 Degree Hot Water Rule and Electrical Sign-Offs
NSW sets its own rule on how hot water can be at bathroom taps and showers. Under the NSW variation to the Plumbing Code of Australia, hot water used for washing and bathing must be delivered at no more than 50 degrees Celsius. The limit drops to 45 degrees in aged care, childcare, schools and facilities for people with a disability. A temperature control device, such as a tempering valve or thermostatic mixing valve that blends hot and cold water, is required for every new heated water service. The same requirement applies when a water heater is replaced, regardless of its type or location. Rinnai makes heat pump and continuous flow gas hot water systems, which heat water as you use it, and Rheem makes gas, electric, solar and heat pump models.
Electrical work in a bathroom includes lights, power points, exhaust fans and any heated towel rails or floor heating. The electrician must lodge a Certificate of Compliance for Electrical Work, known as a CCEW, no later than seven days after testing the work. Certificates go through the Building Commission NSW eCert portal, which emails a copy straight to the customer. For the electrical side, see our guide to hiring an electrician in Sydney. Owners adding a split system air conditioner in the same year can plan the switchboard work together, as our guide to hiring an air conditioning installer in Sydney explains.
| Item | Rule | Who Does It | Paperwork |
|---|---|---|---|
| Hot water at the shower and basin | No more than 50°C | Licensed plumber | Certificate of Compliance |
| New hot water service | Temperature control device fitted | Licensed plumber | Certificate of Compliance |
| Replacement water heater | Temperature control device fitted | Licensed plumber | No Notice of Work for a like-for-like swap |
| Lights, power and heating | Licence needed at any value | Licensed electrician | CCEW within seven days |
| Exhaust fan | Named fan and where the air goes | Licensed electrician | CCEW for new wiring |
| Heat, vent and light unit | Licensed wiring | Licensed electrician | CCEW within seven days |
Asbestos Sheeting Behind Old Sydney Bathroom Tiles
SafeWork NSW says homes built or renovated before the late 1980s may contain asbestos, and bathrooms were one of the common places it was used. Its examples include wall sheeting behind tiles, Tilux style wall sheets printed to look like tiles, and vinyl floor tiles with their adhesives. Demolition is when these materials are most likely to be broken, which is why testing comes before any tiles are removed. Our NSW cost guide puts a pre-demolition asbestos assessment at about $300 to $600. A test result costs far less than cleaning up a bathroom where sheeting has already been smashed. Samples can be arranged through asbestos testing and inspection before the demolition date is set.
Friable asbestos, which crumbles easily, must always be removed by a licensed professional holding a Class A licence. Removing more than 10 square metres of non-friable, or bonded, asbestos needs a non-friable removal licence, known as Class B. SafeWork NSW recommends a licensed professional for any amount of non-friable asbestos, and bathroom sheeting is no exception. Our NSW cost guide puts asbestos removal in a bathroom at about $1,500 to $4,000 on top of the normal strip-out. Specialists for this step are listed under asbestos bathroom removal, and demolition should wait until their work is finished.
Ask each renovator how they will handle a positive test, including who removes the material and who pays for any delay. A clear plan in the quote stops the job stalling for days while a licensed removalist is found. Waste containing asbestos must go to a landfill that accepts it, so it cannot simply be thrown in the general skip bin. Keep the removalist's paperwork with the rest of the handover file for future buyers.
| Material | Where It Shows Up | Who Removes It | Note |
|---|---|---|---|
| Wall sheeting behind tiles | Bathroom walls in older homes | Licensed removalist advised | Test before demolition |
| Tilux style wall sheeting | Older bathroom walls | Licensed removalist advised | Shown in SafeWork NSW guidance |
| Vinyl floor tiles and adhesive | Under newer floor coverings | Licensed removalist advised | Adhesive may contain it too |
| Friable material | Crumbling or damaged products | Class A licence only | Any amount |
| Bonded sheeting over 10 m² | Larger wall or floor areas | Class B licence or higher | Licence required |
| Unknown material | Any bathroom from before 1990 | Assessor first | About $300 to $600 to test |
Vanity Tops and Shower Ledges After the Engineered Stone Ban
Since 1 July 2024, the manufacture, supply, processing and installation of engineered stone has been banned in NSW. SafeWork NSW says the ban covers benchtops, panels and slabs, including bathroom surfaces, splashbacks and cut-to-fit pieces. Natural stone is not covered, and porcelain and sintered stone, made from minerals fused by heat, are outside the ban only where the product contains no resin. Ceramic tiles, grout and plasterboard are also outside the ban, so ordinary tiling work carries on as before. A quote offering a new engineered stone vanity top in 2027 is offering something that cannot lawfully be installed.
Existing engineered stone in your bathroom is safe while it stays undisturbed, according to SafeWork NSW. Work on old stone that needs cutting, grinding or drilling is allowed only with dust controls, breathing protection and notification to SafeWork NSW. Owners should never attempt this work themselves and should leave it to a qualified tradesperson. Cutting tiles and natural stone still creates silica dust, which harms the lungs, so ask whether the crew will cut with water or extraction rather than dry. For vanity and basin options, see our guide to vanity and basin installation.
Stone Surfaces in a Sydney Bathroom
Fixtures, Linings and the Handover File
Most of the visible cost of a bathroom sits in the fixtures, and naming each one in the quote makes prices easier to compare. Decina makes freestanding, inset and spa baths, and a freestanding bath needs clear floor space around it. Stegbar makes frameless and semi-frameless shower screens, and our guide to shower screen installation compares the options. Behind the tiles, the wall sheets should be made for wet areas rather than ordinary living rooms. James Hardie makes Villaboard, a moisture resistant lining sheet that the maker describes as ideal for wet areas. Gyprock makes Aquachek, a plasterboard sold for wet area walls in homes.
Good ventilation protects the new finishes from mould once the room is back in daily use. IXL makes the Tastic heat, vent and light unit for bathrooms, which combines a heater, exhaust fan and light in one ceiling fitting. Ventair makes bathroom exhaust fans, and the quote should name the fan and say where it will blow the damp air. For fan sizes and ducting, the pipe that carries air outside, see our guide to bathroom ventilation.
At handover, collect a file that lets anyone understand the work years later. It should hold the contract and variations, the plumber's Certificate of Compliance, the electrician's CCEW and any sewer service diagram. Add the membrane product name, the photo record of the waterproofing and the tile batch numbers, since colours vary between batches and matching tiles later is far easier with them. Strata owners should also file the special resolution and any conditions it set on the work. Warranty cards for tapware, fans and the hot water system belong in the same folder.
| Document | Why Keep It | Supplied By | File It With |
|---|---|---|---|
| Plumbing Certificate of Compliance | Shows the plumbing meets the code | Licensed plumber | The contract |
| CCEW | Shows the electrical work was tested | Licensed electrician | The contract |
| Sewer service diagram | Records new drain positions | Licensed plumber | House records |
| Membrane name and photos | Evidence for any later leak claim | Waterproofer | The contract |
| Tile batch numbers and spares | Matching repairs later | Tiler | A dry cupboard at home |
| Strata resolution | Sets who maintains common property | Owners corporation | Strata records |
Leaks, Defects and Disputes After the Renovation
A slow leak is the defect most owners fear, and in a Sydney unit it often shows first as a stain on the ceiling below. NSW home building law gives warranties of two years for ordinary defects and six years for major ones, counted from completion. Report any defect to the renovator in writing straight away, with photos, the date you noticed it and a copy of the contract. On a job over $20,000, write to the compensation insurer too, in case the business later cannot fix the problem. Small grout or silicone failures can often be handled quickly, and our guide to shower regrouting and leak repairs explains the usual fixes.
If the renovator will not fix the problem, Building Commission NSW offers a dispute resolution service for home building work. The NSW Civil and Administrative Tribunal, known as NCAT, expects home building disputes to go through that step before an application is made. Evidence of that attempt is attached to any tribunal application, so keep every letter and email. In a strata building, tell the strata manager early if water is reaching common property or another lot. A complete handover file makes each of these conversations shorter and easier to settle.
Leaks under a shower are not always the membrane's fault, so find the cause before anything is pulled apart. Failed silicone at the screen or a cracked grout line can let water through even when the membrane below is sound. A leak detection visit before any tiles are lifted can save a great deal of demolition and cost. Invite the original renovator to that visit, since the warranty set by law may cover the repair.
What to Look Out For in a Sydney Renovator's Paperwork
Several warning signs can show up in the paperwork before any work starts. A quote above $5,000 that shows no licence number, or one whose licence is held under another name, is a reason to stop. A deposit above 10 per cent, or any payment on a contract above $20,000 made before you hold the insurance certificate, breaks NSW home building law. In a strata unit, a start date set before the special resolution has passed is another sign of trouble ahead.
Missing work is the second group of problems, and it often hides in very short quote lines. A line that just says waterproofing, with no membrane named and no mention of AS 3740, leaves you nothing to check. Look for the plumber's and electrician's names and licence numbers, not just the renovator's own details. Any home from before 1990 should have asbestos testing either priced or excluded in writing. An engineered stone vanity top on a 2027 quote shows the business is not following current rules. Prices far below the ranges in our budget bathroom renovation guide usually mean something has been left out.
Checks Before Signing a Bathroom Contract
A strata start date set before the owners vote is a warning sign in itself.
An engineered stone vanity top on a new quote is another reason to ask questions.
Getting Comparable Quotes From Sydney Bathroom Renovators
Quotes can only be compared fairly when each renovator works from the same information about the room. Give every business the same brief with measurements, photos and a simple sketch showing where each fixture should go. Tell them whether the home is a house or a strata unit, the year it was built, and whether the building has a lift and loading dock. Request a price split into demolition, waterproofing, plumbing, electrical work, tiling, fixtures and waste. With the stages separated, the reason one total is higher than another usually becomes obvious.
Ask who will do each stage, whether the renovator's own staff or subcontractors, and who supervises the site from day to day. Check how long each price holds and how long the bathroom will be out of use, since many Sydney homes have only one. Find out whether the business prepares the strata paperwork or expects you to do it yourself. A renovator who answers these questions in writing is far easier to hold to the plan. Owners planning a high end room can compare luxury bathroom renovation costs, while those wanting one builder to manage every trade can look at renovation builders.
Many owners plan other work in the same year, and booking trades in a sensible order saves money. Outdoor jobs that often follow a renovation are covered in our Sydney guides to hiring a concreter, hiring a fencer and hiring a gardener. Schedule outdoor work after the skip bin and the renovation trades have left the driveway. Good preparation, signed paperwork and a complete handover file make a Sydney bathroom renovation far easier to manage.
Bathroom Renovators Across Sydney
The price ranges on this page apply across Greater Sydney, from the inner city to the outer suburbs. Renovators based near your area are more likely to quote without a travel charge for the several site visits a bathroom needs.
▶ Sydney 30 areas
▶ Central Coast 24 areas
▶ Blue Mountains 22 areas
▶ Illawarra 30 areas
▶ Southern Highlands 24 areas
▶ South Coast 28 areas
Sydney Bathroom Renovator FAQ
Does my apartment bathroom need a strata vote before work starts?
Which licences should a Sydney bathroom renovator hold?
Does the exempt bathroom rule cover a heritage listed terrace?
How high must the shower walls be waterproofed?
Why does a new hot water system need a tempering valve in NSW?
Can I still get an engineered stone vanity top in Sydney?
What paperwork should the plumber leave after a bathroom job?
What happens if the old bathroom walls contain asbestos?
When can I pay a deposit on a bathroom job over $20,000?
Can bathroom demolition go ahead on a Sunday in the City of Sydney?
Sydney Bathroom Renovation Specialists
Related Services
For Trades & Contractors - NSW
Bathroom renovations in Sydney rely on several licensed trades working in sequence. Plumbing and electrical work need licensed specialists at any value, while waterproofing, tiling and asbestos removal each need their own qualified trade. These services are booked alongside bathroom jobs across Greater Sydney.
Compare Sydney Bathroom Renovation Quotes
Tell us your suburb, whether you live in a house or a strata unit, and what you want changed in the bathroom, then compare quotes from local Sydney renovators who are all pricing the same job.
Get Free Bathroom Renovation QuotesAbout This Guide
This page provides guidance information only. Details may change, always verify with the relevant authorities and seek independent professional advice where needed.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.