Hire a Tiler Logan and Redlands QLD - Get Local Quotes

Booking a Tiler for a Logan or Redlands Home

Tilers working across Logan and the Redlands charge roughly $50 to $100 per square metre to lay floor or wall tiles in 2026, before the cost of the tiles, adhesive, grout and any waterproofing. That band matches the Logan figure on the Queensland tiling services hub, and large porcelain or natural stone can add 20 to 40 per cent. Repair visits carry their own minimum, with a call-out and assessment fee of about $250 to $450 before any tile is replaced. Tiling work valued over $3,300, counting labour and materials, must be done by a contractor licensed by the Queensland Building and Construction Commission (QBCC). The two council areas take in older brick homes, big family houses on estate lots, acreage properties and bayside streets, and each kind of home brings its own tiling questions.

Tiling businesses in the area range from sole traders who handle repairs and single rooms to crews that tile whole houses for builders. Sole traders can suit a few cracked tiles in a rental, while a crew of two or three tilers can finish a 90 square metre living area in days instead of weeks. Some tilers also hold a licence that covers waterproofing and some do not, which matters for any bathroom, laundry or balcony. Before you call anyone, write down whether the job is a repair, a new floor or wall, or one stage of a larger renovation, because that decides which kind of business to approach first.

What Tiling Jobs Cost Between Logan and the Bay in 2026

The figures here are 2026 estimates for the Logan and Redland City Council areas, set to agree with the Logan bands already published for Queensland tiling and tile repairs. Standard floor or wall tiling costs about $50 to $100 per square metre in labour, and tiles of 600 by 600 millimetres or larger sit near the top because they need a flatter base. Kitchen splashbacks cost roughly $300 to $1,000, depending on their length, the number of power point cut-outs and whether the tiles are small mosaics. Tiling a whole bathroom, labour only, comes to about $2,000 to $5,000, and waterproofing by a licensed applicator adds $500 to $1,500 for each wet area. Patio and alfresco retiling, with the tiles supplied, runs at about $85 to $160 per square metre once the old tiles are gone. Extras and per job prices for Brisbane are broken down further under tiling costs in Brisbane, and the same cost factors apply south of the river.

Extras account for much of the gap between two quotes for the same room. Removing old floor tiles costs about $35 to $75 per square metre, and levelling a slab adds about $30 to $80 per square metre, with methods compared under floor levelling and screeding. Epoxy grout, a two-part resin grout that copes with stains and water better than cement grout, adds about $30 to $60 per square metre over a standard grout. Skip bins, sealer for natural stone and aluminium or stainless trims on exposed tile edges are smaller items that still add to the total.

Square Metre Rates, Fixed Job Prices and Day Rates

Tilers charge in one of three ways, and quotes are easier to compare once you know which one each tiler has used. Square metre rates suit floors and walls where the area is simple to measure, and the quote should say whether that rate covers labour only or labour with adhesive and grout. Fixed job prices suit a bathroom, laundry or splashback, where cutting around taps, wastes and window reveals takes more time than the area alone suggests. Day rates suit repairs and small mixed jobs, since nobody can know in advance how many neighbouring tiles will crack when the first damaged one is lifted. Whatever the method, the quote should say what happens if the job grows because of hidden damage or a floor that turns out to be badly out of level.

Materials other than the tiles are a separate cost that some quotes fold into the rate without saying so. Adhesive, grout, primer, trims and sealant all have to be bought, and large tiles use more adhesive because it is spread on the floor and the back of each tile, called back-buttering. Ask whether the quote names the adhesive and grout, because a product that is fine for a dry hallway may not suit a shower or an outdoor slab. Travel is rarely charged in the suburbs close to the Pacific and Logan motorways, while acreage properties at the southern and western edges of Logan can attract a fee for the extra driving time. Payment stages should follow finished work you can see, such as the floor laid or the walls grouted, within the deposit limits described later on this page.

Quick Tile Repairs While a Rental Sits Empty

The gap between one tenancy ending and the next one starting is the easiest time to fix cracked, loose or stained tiles in an investment property. A tiler can lift a broken floor tile, scrape out the old adhesive, set a spare in place and grout it in one visit, then come back to seal the grout once it has cured. Grouping several small faults into a single visit keeps the cost closer to $120 to $280 for the first tile and $60 to $120 for each extra tile replaced at the same time. Re-grouting a tired bathroom floor and walls costs about $700 to $1,300 in Logan and the Redlands, and fresh grout changes how the room looks in listing photos. Shower leaks are a different problem from cracked grout and are a job for shower regrouting and leak repairs, because the fix may involve the waterproofing under the tiles. Booking the tiler before the bond clean, not after it, avoids paying the cleaner twice for grout dust.

Queensland's minimum housing standards applied to new and renewed tenancies from 1 September 2023 and to all remaining tenancies from 1 September 2024. Under them a rental must be in good repair, free of damp and mould unless the tenant caused it, and have floors not likely to collapse from rot, defects or significant dampness. One drummy tile, meaning a tile that sounds hollow because it has lost its bond, is not a breach, but a floor where tiles keep lifting could become one if it is left alone. Your property manager can arrange entry with the correct notice if a tenant is still living in the home, and the tiler should know which rooms are occupied. Keeping invoices and before and after photos on the property file helps when a tenant or a later buyer asks about past repairs.

Matching a Tile That Is No Longer Made

Matching can be the hardest part of a small tiling repair, because tile ranges are changed or dropped over time and even one range can vary in shade between production batches. Start by checking the garage, the shed and the roof space for spare boxes left by the builder, and keep the box label because it shows the maker, the range and the batch. Without spares, a tiler may take a tile from a hidden spot, such as under the fridge or inside a pantry, and fill that spot with a near match. Tile shops can sometimes identify a range from a photo and a broken piece, and their current ranges can be held against the old tile for a close match. When no close match exists, a planned change looks better than a patch, such as a contrasting strip at a doorway or a new floor in one whole room.

Grout colour matters as much as the tile in a small repair. Mapei, Davco and Bostik make cement-based grouts in a wide range of colours, and a tiler can mix a test batch and let it dry beside the old grout before filling the joints. Old grout darkens with years of cleaning and foot traffic, so new grout in the same named colour can look lighter for some months. Re-grouting the whole floor during the same visit gives an even finish, at the re-grout rates listed for tile repairs in Queensland.

Buying the Tiles Yourself or Through the Tiler

Owners can buy their own tiles and pay the tiler for labour only, or ask the tiler to supply everything at an agreed price. Buying your own lets you choose from any showroom and keeps the tile price visible, but it also makes you responsible for ordering enough and checking the boxes on delivery. Allow around 10 per cent extra for cuts and breakages on a simple floor and more for a diagonal or herringbone pattern, then keep the leftover boxes for future repairs. Every box should carry the same batch or shade code, and the tiler should open several boxes and lay tiles out loose before fixing any, so colour differences show up early. If a tile proves faulty after it is laid, the supplier and the tiler may each point to the other, so agree in writing who checks the tiles before they go down. Tiles bought through the tiler may carry a margin, but one business is then responsible for any fault in them.

Adhesive choice depends on the tile and the surface it is going onto. Ardex and Kerakoll make cement-based tile adhesives, sold in grades for floors, walls and outdoor areas, and the right grade for heavy porcelain differs from the one for a light wall tile. Large tiles need adhesive under the whole tile, and a careful tiler lifts a freshly laid tile now and then to check the coverage on its back. Supply prices listed for bathroom renovations in Queensland put porcelain at $50 to $150 per square metre and large-format tiles at $80 to $300. Comparing the price of the tile you like with the tiler's labour rate shows quickly where the money in a quote is going.

Long Open-Plan Floors and Where Movement Joints Go

Larger homes on estate lots in both council areas can run one tiled floor from the front door through the kitchen, dining and family rooms. Tiles and the slab beneath them expand and contract at different rates as temperatures change, and a long floor with nowhere for that movement to go can crack or lift in a ridge. A movement joint is a gap through the tile layer filled with flexible sealant or a prefabricated strip, so the floor can move without breaking the tiles. A Housing Industry Association summary of AS 3958:2023, the tile installation standard from Standards Australia, sets joints no more than 4.5 metres apart where an internal floor exceeds 9 metres. The same spacing applies to an internal floor longer than 6 metres that gets direct sunlight, such as a living area beside wide glass sliding doors. Perimeter joints are also needed where tiles meet walls, columns or other fixed surfaces, though the standard lets rooms under 10 square metres leave them out if tiles stop at least 3 mm short.

Joints should also sit over any joint already in the slab, because a crack in the concrete will travel straight up through tiles laid across it. Schluter-Systems makes Dilex movement joint profiles and the Ditra uncoupling membrane, a plastic sheet laid under tiles that lets the slab and the tiles move separately. Raimondi makes clip and wedge levelling systems, which hold the edges of large tiles flush while the adhesive sets and reduce lippage, the small height difference between neighbouring tiles. Ask each tiler to mark the joint positions on a floor plan, so you can see before work starts whether a line will cross a doorway or run through the middle of the room. Any quote for a 60 square metre living floor that says nothing about movement joints is missing part of the job.

Joints can be added to a floor that has started to crack or tent, at roughly $45 to $95 per metre, by cutting along a planned line and filling the cut with sealant. Tenting, where tiles push up into a ridge, needs the lifted tiles relaid as well, and a repair of 2 to 4 square metres runs at about $900 to $2,200. Colour-matched sealant makes the joints hard to spot, and a straight line along a grout joint looks far tidier than a joint that wanders across the floor. Ground floors on a slab are where these problems show up in houses here, while timber floors on stumps raise different questions that are covered for Brisbane tilers working on Queenslanders.

Cracked Tiles on Clay Ground and Who Should Look First

The QBCC guide on preventing structural damage states that the majority of Queensland homes sit on reactive clay soils, which swell when wet and shrink as they dry. Footings are designed for normal seasonal movement, but the guide names trees, poor drainage and leaking plumbing as causes of abnormal moisture changes that can move a slab. Cracked floor tiles are sometimes the first sign, especially a crack that runs in a line across several rooms or carries on up a wall. Replacing those tiles without finding the cause can mean paying for the same repair again after the next wet season or dry spell. The guide recommends checking site maintenance when cracking appears and getting advice from the builder or an engineer where movement continues.

Every new house is designed to a site classification under AS 2870, the standard for residential slabs and footings, which uses classes such as S, M, H1, H2 and E. The classification sits in the building approval documents, which the builder or the private building certifier may hold, and Logan City Council can be asked about building records for the property. In Queensland a site classification is licensed work at any value, so a new assessment must come from someone the QBCC has licensed to do it. Inspection by a structural engineer can show whether the slab is still moving, and a plumber can test the drains and pipes under the house for leaks that may be wetting the clay. The QBCC guide puts a safe distance for a tree at one times its mature height on moderately or highly reactive sites and one and a half times on extremely reactive sites.

Once the cause is fixed or the movement has settled, a tiler can replace the cracked tiles and add movement joints where the old floor had none. Owners in the Redlands with the same problem can contact Redland City Council about building records for an older house. Tilers are not the right people to judge whether a slab has finished moving, and a quote that promises to fix structural cracking with new tiles alone deserves a second opinion. Keep the engineer's report with the tiling invoice, since a buyer's building inspector will want to see both.

Acreage Blocks, Travel Time and Pallet Deliveries

Acreage areas in the south and west of Logan, such as Jimboomba, Greenbank and Park Ridge, and Mount Cotton in the Redlands sit further from tile suppliers and from where tilers are based. Tilers may add a travel fee or set a higher minimum for small repairs there, so request that charge as its own line on the quote. Large homes on acreage can need 100 square metres or more of floor tiles, which arrive on pallets that a truck must be able to reach and set down on firm ground. Agree where the pallets will sit, keep them under cover, and check the delivery count against the order before the truck leaves. Long driveways and soft ground after rain can stop a heavy delivery, so book it for a dry spell where you can.

Grouping several jobs into one booking spreads the travel cost. Tiling a laundry floor, a shed bathroom and a patio on the same property lets them share one set of travel charges and one skip bin. Outdoor tiling on a large block also needs power for mixers and saws, so tell the tiler where the nearest outdoor power point is before they arrive. New outdoor power points or lights that are part of the plan should be installed by a Logan or Redlands electrician before the tiles go down.

Tiling a large floor in stages lets a family keep using part of the house while the rest is laid. Each section needs a day or more for the adhesive and grout to set before furniture moves back, so the tiler should give you a staging plan with dates. Doorways between stages are sensible places for a movement joint or a trim, which also hides the line where one day of work meets the next. Agreeing the stages in writing gives you clear points to tie progress payments to, and it keeps the tiler and the household working to the same timetable.

Bayside Homes From Wellington Point to Redland Bay

Homes close to Moreton Bay in suburbs such as Cleveland, Ormiston, Wellington Point and Victoria Point get salt spray and wind-blown sand on their outdoor tiled areas. Salt left to dry on tiles can leave white marks, and grout that stays damp and salty can stain and wear faster than grout indoors. Rinsing outdoor tiles with fresh water after windy weather and cleaning the grout lines a few times a year helps them last. Natural stone such as travertine or limestone needs a penetrating sealer, a clear product that soaks into the stone and slows the uptake of water and salt. Sealers wear away outdoors, so the tiler should tell you which product was used and how often it needs to be reapplied. Laticrete makes SpectraLock epoxy grout, which resists water and staining better than cement grout and is one option for exposed outdoor joints near the water.

Metal parts outdoors need the same thought as the tiles. Stormtech makes linear drains and grates in stainless steel, and any trims or grates near the bay should be a grade the maker rates for coastal exposure, which the product data sheet will state. Canal homes at Raby Bay in Cleveland sit beside tidal water, and pool surrounds there combine pool water with salt air from the bay. Coping, the edging around the top of a pool, and the band of waterline tiles have their own guide with repair prices under pool tile and surface repairs. Balcony tiling over a membrane in towers and coastal units is set out further for hiring a tiler on the Gold Coast, where high-rise work brings its own approvals.

Tiling Over a Patio or Alfresco Slab

Concrete patio and alfresco slabs can be tiled, but the slab has to be sound, clean and shaped so water runs away from the house. The fall, meaning the gentle slope built into a surface so water drains off it, should already be in the slab, because building it up with extra adhesive under the tiles leaves weak spots. Cracks in the slab need to be assessed first, since a crack that is still moving will show through the new tiles. New slabs need time to cure and dry before tiling, and the minimum waiting period is listed on the adhesive maker's data sheet. If you still need a patio roof or a new slab, plan that stage first with our guide to patio construction in Queensland.

Slip resistance matters more outdoors than in a living room, because rain, pool water and garden sprinklers leave the surface wet. Under AS 4586, the Australian Standard for slip resistance testing, tiles tested wet with a pendulum are rated from P0 to P5, with higher numbers giving more grip. The tile maker or importer should be able to supply the test certificate for the exact product, and a showroom label that simply says outdoor is not the same as a test result. Surfaces with more grip are harder to clean, so a heavily textured tile beside a barbecue can hold grease and dirt. Thick outdoor porcelain, around 20 millimetres, can also be laid on pedestals or a gravel bed in some designs, and the tiler should explain how that differs if it is offered. Ask for the P rating in writing on the quote, beside the tile name and size.

Which QBCC Licence Class Covers the Work

The QBCC issues a wall and floor tiling licence class, and its scope covers cutting and fixing ceramic, glass, marble, slate, stone and terracotta tiles to floors, walls, hearths, fireplaces, spas and swimming pools. The same class includes applying waterproofing for wall and floor tiling, while a separate waterproofing class covers applying, installing and repairing waterproofing, including the surface preparation. Tiling licence holders may also do incidental work from another class when it is valued under $3,300, but cannot do occupational work such as plumbing or drainage, which needs its own separate licence. Moving a floor waste, shifting a tap or adding a power point therefore needs a Logan or Redlands plumber or a licensed electrician, whatever the tiling licence says. Check the licence number on the quote against the free licence search on the QBCC website, and confirm the class listed matches the work you are paying for. An owner working on their own property needs no licence for work valued at no more than $11,000, but that exemption does not cover a tiler you hire.

Waterproofing is where the licence class and the paperwork matter most. The membrane, the waterproof coating or sheet under wet area tiles, must meet AS 3740, the Australian Standard for waterproofing domestic wet areas. Request photos of the membrane before tiling, the product name, and any certificate or written statement the waterproofer provides for the work. Membrane products, curing times and failure signs are set out under bathroom waterproofing in Queensland, alongside current prices.

Written Contracts, Deposits and Cooling-Off Rights

Queensland's contract rules depend on the value of the job, counting labour, materials and the goods and services tax (GST). Tiling jobs of $3,300 or less do not need a written contract, though a written quote and an invoice still protect both sides. From $3,301 to $19,999 a Level 1 contract is needed, showing the licence number, the work, the price, the Queensland Home Warranty Scheme premium, a completion date and your cooling-off rights. Jobs of $20,000 or more need a Level 2 contract, which adds a start date, a price change warning and statutory warranties, and you must get the QBCC Consumer Building Guide before signing. The contractor must give you a full signed copy of the contract within five business days of entering into it. The rules sit in Schedule 1B of the Queensland Building and Construction Commission Act 1991, which is published in full on Queensland legislation.

Queensland caps deposits at 20 per cent for work of $3,300 or less, 10 per cent for work from $3,301 to $19,999 and 5 per cent for work of $20,000 or more. The contractor also cannot claim more than half the contract price, including the deposit, until at least half of the on-site work is done. You have five business days to withdraw from a contract over $3,300, starting the day after you receive the signed copy, and the contractor can keep $100 plus reasonable out-of-pocket costs. The Home Warranty Scheme covers residential work over $3,300, and the contractor collects the premium from you and pays it to the QBCC. For non-structural defects such as cracked or lifting tiles, the defect must be noticed within six months of completion and a claim lodged within seven months.

Old Wall Sheets, Asbestos and Tile Cutting Dust

Asbestos was used in homes built from the 1950s through the 1980s, and it can sit behind old bathroom and laundry tiles in fibre cement wall sheets or under old vinyl floor coverings. You cannot tell by looking, so a sample tested by a laboratory gives the only reliable answer, and testing an older bathroom costs about $300 to $1,500 depending on the number of samples. Queensland guidance lets a homeowner remove up to 10 square metres of bonded asbestos (held firmly in a solid material) without a certificate, but larger amounts need a certificate or a contractor who holds one. The same guidance lists removing tiles from a bathroom wall as non-removal work, which needs no certificate but still needs precautions that keep asbestos fibres out of the air. Arrange asbestos testing and inspection before demolition starts, since finding it halfway through stops the job and adds cost.

Cutting tiles produces dust that contains respirable crystalline silica, a fine dust that can damage the lungs when it is breathed in. The Queensland code of practice on silica dust in construction, in force since 1 May 2023, covers cutting tiles and calls for controls such as water suppression or extraction fitted to the tool. Engineered stone benchtops and slabs have been banned since 1 July 2024, and porcelain and sintered stone (slabs made by fusing minerals under heat and pressure) products without resin are exempt from that ban. Rubi and Montolit make hand-operated tile cutters, which score a line and snap the tile without creating cutting dust, and Norton Clipper makes wet saws that feed water onto the blade. Tilers working inside a lived-in home should cut outside or use extraction, cover vents and doorways, and clean up with a vacuum fitted with a suitable filter instead of a broom. Details of the code are published by Workplace Health and Safety Queensland.

When Tiles Fail After the Tiler Has Left

Defects in new tiling tend to appear within the first months, as hollow tiles, cracked grout, lifting edges or a shower that leaks into the next room. Report the problem to the tiler in writing with photos and dates, and give them a fair chance to inspect and fix it. If the tiler does not respond, the QBCC accepts complaints about defective building work, and the Home Warranty Scheme can apply to work over $3,300 within its time limits. Disputes over money or the quality of the work can also go to the Queensland Civil and Administrative Tribunal, known as QCAT. Keep the contract, invoices, product names and photos taken before the tiles covered the membrane, because they show what was installed.

Not every crack is a workmanship defect, and who pays for the repair depends on what caused it. Tiles that crack because the slab moved after a plumbing leak are a different matter from tiles laid without enough adhesive under them. Hollow tiles over a large area, cracks along a straight line and grout that crumbles soon after the job are all signs to record with dated photos. Ordering a drummy survey, where a tiler taps across the floor and maps the hollow tiles, costs about $250 to $600 and gives you an independent record before any dispute.

Warning Signs in a Logan or Redlands Tiling Quote

Every tiling quote should name the tile, its size and the area in square metres, so you can check the measurements against your own. It should list removal of old tiles, floor preparation, adhesive, grout colour and type, movement joints, trims and silicone as separate items or clearly state that each one is included. For wet areas it should say who does the waterproofing, which licence they hold and which membrane product they plan to use. Check that the name and licence number on the quote match the QBCC register, and that the total includes GST. A quote for a long living floor with no movement joints, or for a bathroom with no waterproofing line at all, is missing work that will be needed.

Payment terms and the way a tiler pushes for a start date can also point to trouble later. Deposits above the legal limits, cash payment into a personal account, or pressure to start before the contract is signed are all reasons to slow down. Be wary of any plan to lay new tiles over the old ones when nobody has checked that the old layer is level and firmly stuck down. A price well under the rest can mean the quote leaves out preparation, waterproofing or rubbish removal, which then comes back later as a variation.

Getting Like-for-Like Tiling Quotes in Logan and the Redlands

Every tiler needs the same information to give prices you can compare. Send each one the room measurements, photos of the existing floor or walls, the chosen tile or a budget per square metre, and whether old tiles have to come out. Say whether the house sits on a slab or has timber floors, the year it was built if you know it, and whether any cracking has appeared. For a larger floor, a simple sketch showing doorways, the kitchen island and any steps helps the tiler plan joints and cuts. Owners comparing prices elsewhere in South East Queensland can use the same checklist with tilers in Ipswich and the Lockyer Valley, where older timber cottages raise different questions. For a typical job, three written quotes give you enough to compare.

Request a start date, how many days the crew will be on site, and the curing time before the floor can be walked on or the shower used. For a bathroom, the order of strip-out, plumbing, waterproofing and tiling is laid out under bathroom tiling in Queensland, which helps when the tiler is one of several trades. Investors with a second property further north can apply the same steps with tilers on the Sunshine Coast or in Moreton Bay and Redcliffe, where holiday homes and new estates raise their own questions. Keep every quote, the signed contract and the product details together, because a later repair is easier when the next tiler knows which adhesive, grout and tile went down. Store the leftover tiles somewhere dry with their box labels intact.