Buying a Home in NSW?
Tell us the address, the age of the home and your settlement dates, and we'll connect you with licensed plumbers who can inspect the plumbing before you commit.
Typical Costs (2027 Estimates)
These figures are 2027 estimates for NSW homes. Whole-of-house plumbing inspections, repairs found on the day and regional travel are priced per job.
Pre-Purchase Plumbing Inspection Services NSW - Get Local Quotes
A pre-purchase plumbing inspection is an optional check that a buyer arranges with a licensed plumber before committing to a NSW home. The plumber tests parts of the property that a standard building inspection does not test in use. These include the water service, the pressure at the taps, the hot water system, the toilets, the drains and signs of hidden leaks. Drains can be filmed with a small camera pushed along the pipe, and the footage can show roots, cracks, sagging sections and joints that have moved. Prices on this page are 2027 estimates for NSW, from $350 to $700 for a pre-purchase drain camera inspection and $100 to $200 for a hot water system inspection. Whole-of-house plumbing inspections have no published band, so they are priced on quote from the call-out fee and the plumber's hourly rate. Timing matters, because a private sale through the agent in NSW has a five business day cooling-off period, while a purchase at auction has none. Book before contracts are exchanged or before auction day where you can, and arrange access through the selling agent, who can confirm a time with the seller. A written report with photos, footage and rough repair costs gives you clear facts to weigh before you sign the contract. The check suits older homes with clay drains, galvanised pipes or an ageing water heater, and homes with damp walls or stained ceilings. Unit buyers, investors and buyers of rural homes also have extra checks, such as strata records, rental water rules and septic systems.
At a Glance - Pre-Purchase Plumbing Checks in NSW (2027 Estimates)
| Check | 2027 Estimate (NSW) | Best For | Who Does It | What You Receive |
|---|---|---|---|---|
| Whole-of-house plumbing inspection | Priced on quote | Older homes and renovated bathrooms | Licensed plumber | Written report with photos |
| Pre-purchase drain camera inspection | $350-$700 | Clay pipes and large trees near drains | Licensed drainer | Footage of sewer and stormwater lines |
| Locating and depth marking | $150-$400 | Planned extensions, pools or paving | Licensed drainer | Pipe path marked on the ground |
| Hot water system inspection | $100-$200 | Units with no service history | Licensed plumber | Condition notes and model details |
| Leak detection visit | $200-$450 | Stains, damp walls or a moving meter | Licensed plumber | Likely leak location |
| Building inspection only | $300-$600 | Structure and general condition | Building inspector | Visual condition report |
| Strata report | $250-$450 | Units and townhouses | Strata searcher | Summary of scheme records |
Cost Depth: Building a Pre-Purchase Plumbing Budget
Whole-of-house plumbing inspections have no published price range, so the plumber quotes from a call-out fee of $80 to $150 and an hourly rate of $90 to $180. Drain filming is the largest single item, at $350 to $700 for a pre-purchase camera inspection.
Extras depend on the home and how easily the pipes can be reached. Locating buried pipes adds $150 to $400, a heat camera scan for hidden damp $250 to $550 and asbestos testing $50 to $150 per sample.
All figures in this budget are 2027 estimates for NSW. Repairs found during the inspection are quoted separately.
What a Pre-Purchase Plumbing Inspection Checks
A pre-purchase plumbing inspection is a visit by a licensed plumber to test the plumbing of a home you plan to buy. The plumber runs the taps, flushes the toilets, checks the hot water system and looks for leaks in places a buyer cannot easily see. Drains can be filmed with a camera, and the water pressure can be read with a gauge on an outside tap. The visit ends with a written report that lists what was checked, what was found and what could not be reached. Buyers arrange this optional inspection to lower the risk of costly surprises after settlement.
Plumbing faults can be expensive because pipes sit under slabs, inside walls and below gardens. A cracked sewer line, a corroded water service or a hot water system near the end of its life can each add thousands of dollars to the first year of ownership. Knowing about these problems before you sign gives you time to get repair quotes, raise questions with the vendor or rethink the purchase. The inspection cannot promise that nothing will fail later, since a plumber can only report on what can be seen and tested on the day.
Every inspection has limits, and a careful plumber states them in writing. Pipes buried in a slab, inside finished walls or under heavy paving cannot be seen without damage, and the plumber needs the vendor's consent before cutting or lifting anything. Drains blocked by debris or full of water may stop the camera part way along the line. Furniture, stored goods and locked rooms can also hide fixtures, meters and valves. Any area the plumber could not reach should be named in the report, so you know where the unknowns remain.
Attending the inspection lets you see faults for yourself and ask questions while the plumber is on site. Bring the contract, the drainage diagram and any building report so the plumber can look at the areas already flagged. Watching the drain footage live helps you understand what the report later describes. You can also learn where the meter, the main stop valve and the hot water isolation valve are, which is useful on your first day as owner. Keep a note of anything the plumber calls urgent, so you can raise it with the agent the same day. If you cannot attend, request photos of each finding and a short call to talk through the results.
Pre-Purchase Plumbing Inspection Prices for 2027
Quote Yard's NSW pricing pages do not publish a single price for a whole-of-house pre-purchase plumbing inspection, so the visit is priced on quote. The quote is built from the plumber's time on site, the call-out fee, any camera work and the time spent writing the report. Call-out fees in business hours are estimated at $80 to $150, with labour charged at $90 to $180 per hour. Filming the sewer and stormwater lines for a pre-purchase drain camera inspection costs about $350 to $700. All figures on this page are 2027 estimates for NSW, and the final figure can shift after the plumber has seen the property.
| Check | 2027 Estimate (NSW) | What Drives the Price |
|---|---|---|
| Whole-of-house plumbing inspection | Priced on quote | Size of home, number of bathrooms, report detail |
| Pre-purchase drain camera inspection | $350-$700 | Number of lines and access points |
| Camera inspection with written report | $350-$800 | Report format and length of footage |
| Camera, several lines on a large block | $600-$1,200 | Total pipe length filmed |
| Locating and depth marking | $150-$400 | Pipe depth and ground cover |
| Leak detection visit | $200-$450 | Method used and area searched |
| Thermal imaging survey | $250-$550 | Rooms and walls scanned |
| Hot water system inspection | $100-$200 | System type and access |
| Gas appliance service, per appliance | $100-$200 | Number and type of appliances |
| Asbestos testing, per sample | $50-$150 | Laboratory and number of samples |
Suppose a plumber spends two hours on a house and films the sewer line on the same visit. You would pay two hours at the estimated $90 to $180 hourly rate, plus $350 to $700 for the drain camera inspection, and possibly a call-out fee. Where the fee is not fixed, ask each plumber to list the labour, camera and report charges separately. Some plumbers charge a fixed inspection fee that includes the call-out, so compare the totals and not just the line items. For statewide labour rates, including higher after-hours rates, read our NSW plumber pricing guide.
Other pre-purchase reports are priced separately from the plumbing check. Building inspections on their own are estimated at $300 to $600, and a combined building and pest inspection at $450 to $800. Strata reports, which review the records of the owners corporation that runs a unit block, are estimated at $250 to $450. Booking the plumber in the same week as these inspections means you have every finding before the cooling-off period ends.
How a Plumbing Check Differs From a Building and Pest Inspection
A standard building inspection is a visual check of the structure and condition of the home. Pre-purchase building reports follow AS 4349.1-2007, Inspection of buildings: Pre-purchase inspections, Residential buildings, which sets out recommendations for the visual inspection of homes and for the report. The inspector notes defects such as cracking, dampness and roof damage, but the inspection is not a test of the services in use. Gas fittings, appliances and watering systems are among the items typically excluded, according to Quote Yard's building inspection guide. Read the terms of your building report to see what it leaves out, then fill those gaps with the right trade.
Plumbing inspections go further on the water and drainage systems. Each fixture can be run to time how fast it drains, while the plumber listens for hissing pipes and toilet cisterns, the tanks behind the bowl, that keep running. Pressure can be read on a gauge, the hot water system's label can be checked and the drains can be filmed from the inside. Pests are outside the plumber's role, although moisture from faulty plumbing raises pest risk, as our pest inspection guide notes. Book the building inspection and the pre-purchase pest inspection separately, then add the plumber where the home's age or condition calls for it.
Some homes gain far more from a plumber's visit than others. Older houses with clay sewer pipes, galvanised water pipes or large trees near the drains are the clearest cases. Homes with an ageing hot water system, a recent bathroom renovation or water stains on ceilings and walls also benefit from a closer look. Newer homes with modern pipework may need only a drain camera inspection, which costs less than a full visit.
Timing the Inspection Around Exchange, Cooling-Off and Auctions
Exchange of contracts, when buyer and seller sign matching copies and the sale becomes binding, is the key date for timing the visit. When you buy a home by private treaty in NSW, meaning a sale negotiated through the agent rather than at auction, you have a five business day cooling-off period after contracts are exchanged. It ends at 5pm on the fifth business day, and you can withdraw during that time by giving written notice. Withdrawing costs 0.25 percent of the purchase price, which the NSW Government says works out to $250 for every $100,000. Off-the-plan contracts, for homes bought before they are built, have a 10 business day cooling-off period instead. Book the plumber early in that window, since a late booking leaves no time for repair quotes.
Auctions work differently, because no cooling-off period applies to a property bought at auction. The same applies when you exchange on auction day after the property is passed in, meaning it did not sell during the bidding. Any plumbing inspection must therefore happen before the auction, at your own cost and without knowing whether you will win. Buyers can also waive the cooling-off period by giving the vendor a section 66W certificate, which removes the chance to withdraw after exchange. The NSW Government says you should always seek advice before you waive the cooling-off period.
Access to the home is arranged through the selling agent. Tell the agent you plan to run water, flush toilets, lift drain access caps and open the meter box, so the vendor knows what to expect. If the drains need camera access through an inspection opening, a capped access point on the pipe, check that the plumber may remove its cap. Confirm with the plumber how long they need, since a one-hour open home window may be too short for a large property.
Coordinating the visits saves time while the cooling-off period is running. Booking the building inspector, the pest inspector and the plumber for the same morning means the agent only needs to open the home once. The inspectors can also point out concerns to each other, such as a damp wall the building inspector has found near a bathroom. Request each report by a set date, ideally two business days before the cooling-off period ends. That leaves time for a repair quote or a talk with your conveyancer, who handles the legal side of the sale, before you decide.
Water Service, Meter and Pressure
The water service is the pipe that carries drinking water from the meter to the house. Sydney Water owns the water main under the street and the meter in its area, and the owner is responsible for the other pipes and fittings that run to the buildings and taps. Faults in that private pipe become the buyer's cost after settlement, so its condition is checked wherever it can be seen. Exposed sections near the meter, under the house and at the hot water system show what material was used and whether it has corroded. Galvanised steel, the grey zinc-coated pipe found in older homes, can rust inside and restrict flow as it ages. Where a section is replaced, polyethylene pipe is one option, and Philmac makes compression fittings, which grip the pipe as they are tightened, to join this flexible plastic pipe.
Water pressure is checked with a gauge screwed onto an outside tap. Under AS/NZS 3500.1, a plumbing standard published through Standards Australia, static pressure at any outlet inside a building must not exceed 500 kPa, other than at fire service outlets. Static pressure means the pressure measured while no water is flowing, and kPa, short for kilopascals, is the unit on a plumber's gauge. Where mains pressure is higher than 500 kPa, a pressure limiting valve is needed to bring it down. Without a working valve, high pressure can wear out taps, hoses and appliances faster, so the reading belongs in the report. High pressure can also make pipes bang when a tap shuts quickly, and a plumber can note signs that call for water hammer repair.
Low pressure is a different warning sign, and it can come from corroded pipe, a partly closed valve or a hidden leak. Comparing the reading with the taps shut and with water flowing shows whether the pressure drops sharply once water is in use. When flow is weak across the house, the likely causes and costs are set out in our guide to low water pressure repairs. Old or undersized pipe found during the inspection may lead to a quote for water pipe replacement before you settle.
Hot Water System Age and Condition
Hot water systems have a limited working life, and replacing one is among the larger plumbing costs a new owner can face. The plumber starts by reading the rating plate, the label on the unit that lists its model and serial number. Rheem, which makes storage tank and continuous flow (tankless, instant) water heaters, says the serial and model numbers of its units are on the rating plate. The maker or a plumber can use those details to estimate the unit's age and check whether any warranty may still apply. If the plate is missing or unreadable, the report should say so.
On the unit, the plumber looks for rust at the base, leaky fittings and water from the relief valve, a safety valve that opens when pressure or heat gets too high. The flue on a gas unit, the pipe that carries exhaust gases outside, can be checked for damage and gaps. Bathrooms in newer homes may have a tempering valve, which mixes cold water into the hot supply to lower its temperature at the taps. Galvin Engineering makes the lead-free CliniMix thermostatic mixing valve, another type of valve that blends hot and cold water to a set temperature. Your report should say whether such valves are present and can be reached for service. Any tempering valve that has never been serviced can go on your list of jobs after settlement.
If the system is near the end of its life, a replacement quote helps you weigh the purchase price. Quote Yard's NSW pricing guide gives estimates of $1,000 to $2,500 for an electric storage system supplied and installed, and $1,500 to $3,500 for a gas storage system installed. Gas continuous flow units are estimated at $1,800 to $3,500, and heat pumps, which heat water with warmth drawn from the air, at $3,000 to $5,500 before rebates. For gas storage, Dux makes the Prodigy range and Aquamax makes gas water heaters with stainless steel cylinders. For heat pumps, Rinnai makes Enviroflo models, Stiebel Eltron makes the SHP-O hot water heat pump and Sanden makes the Eco Plus system.
Solahart makes the PowerStore smart electric water heater, and Chromagen makes gas continuous flow units preset to deliver water at 50°C. The right type for the home depends on the gas supply, the roof or yard space and how many people will live there. Check with the plumber whether the existing gas line, power circuit and drain point suit a like-for-like swap or a change of type. Replacement options and running costs are compared in our guide to hot water system replacement.
Sewer and Stormwater Drains on Camera
Drains are the part of the plumbing a buyer can least easily judge, because they are buried. A drain camera is a small waterproof camera on a flexible cable that the plumber pushes along the pipe through an inspection opening in the line. The footage can show cracked or broken pipe, sagging sections that hold water and joints that have moved apart. Tree roots can enter the joints of older clay pipes, and the camera shows how far along the line they reach. Stormwater lines, which carry rainwater from the roof and yard, can be filmed on the same visit if access allows.
Pre-purchase drain camera inspections are estimated at $350 to $700, or $350 to $800 with a written report. Locating and depth marking, where the plumber traces the pipe from the surface with a hand-held receiver that picks up a signal from the camera head and marks its path, adds $150 to $400. This helps when you plan an extension, a pool or new paving, since Sydney Water issues approvals for building close to or over its wastewater pipes. Large blocks with several lines cost about $600 to $1,200 to film. For camera prices across Sydney and regional NSW, read our drain camera inspection cost guide.
Sewer ownership matters when the camera finds damage. In Sydney Water's area, owners own all private wastewater pipes up to and including the point of connection, where the private pipe meets the public sewer main, which can be outside the property. Sydney Water owns that main and the junction, the fitting where the private pipe joins it, and faults on its side are reported on 13 20 90. Private damage becomes the buyer's problem after settlement, so cracked lines can lead to quotes for sewer line repairs or pipe relining, a new lining sealed inside the old pipe with little digging.
Stormwater faults show up differently from sewer faults, and they are easy to miss on a dry day. Downpipes that end at ground level, pits full of silt and stains from water pooling against the walls are signs the system may not be coping. Running water into the downpipes or pits shows where it drains to. Broken stormwater lines can let water soak into the ground beside the foundations, which adds to damp in the space under the floor. Repairs and new lines are priced on our stormwater drainage plumbing page.
Sewer Service Diagrams and the Contract Drainage Diagram
NSW contracts for the sale of land must contain a drainage diagram, along with the title documents and a zoning certificate from the council. In Sydney Water's area, the sewer service diagram shows the private wastewater pipes on a property, with buildings drawn in but pools left off. Agents, conveyancers and plumbers use it to check pipe layouts, and it is ordered through a Property Link broker, a company that supplies property documents for a fee. Request a copy from your conveyancer as soon as the contract arrives, and pass it to the plumber before the visit. Comparing the drawn layout with the camera footage then shows whether the records match what is actually buried.
Differences between the diagram and the house are a useful clue. Bathrooms, laundries or toilets missing from the diagram may have been added without the drainage being recorded. Building Commission NSW requires drainers, the plumbers licensed for drain work, to give a sewer service diagram to the person who arranged the drainage work and to lodge it when the work is complete. Missing records do not prove the work is illegal, but they are a good reason to request the plumber's certificates from the vendor. Sydney Water also issues a building over sewer letter, which says whether it approved a building close to, or over, its wastewater pipes.
Outside Sydney Water's area, drainage records are held by the local water authority, such as Hunter Water or a council that runs the town's sewer. Your conveyancer can request the diagram from the right authority for the address. Older diagrams can be hand-drawn and lack measurements, so treat them as a guide and confirm the layout on site. Once a plumber locates and marks the line, you have an accurate record for future work.
Overflow Relief Gully Height
An overflow relief gully, or ORG, is a grated fitting outside the house that lets sewage spill into the yard if the sewer blocks, instead of backing up through fixtures inside. Building Commission NSW says the required clearances protect against significant property damage if the sewer overflows or blocks. Its advisory note requires at least 150 mm between the top of the gully riser, the short vertical pipe under the grate, and the lowest fixture connected to the drain. The riser must also sit at least 75 mm above the finished ground, except in a path or paved area, where the surface must be finished so water cannot pool around it. Measuring both heights takes a plumber only a few minutes.
Gullies can be buried by later landscaping, covered by pavers or blocked by a pot plant placed over the grate. Raised garden beds and new decks can also leave the gully too low or hard to find. Covered gullies, or gullies set too low, cannot relieve a blockage the way they were designed to. Correcting the height may involve raising the riser or reshaping the ground around it, which is priced on quote. Finding the fault before exchange gives you the chance to discuss the repair with the vendor.
Toilets, Taps, Basins and Showers
Fixtures are the parts of the plumbing you use every day, and the plumber tests each one. Toilets are flushed to check that the bowl empties and that the cistern stops filling, since a cistern that keeps running wastes water. Taps are opened fully to check flow, closed to check for drips and turned to feel for stiff spindles, the stems the handles turn. Basins, sinks, baths and showers are run to see how fast they drain. Slow drains at several fixtures can suggest a problem further down the line, rather than at a single fixture.
Under sinks and basins, the plumber looks for leaking traps, the curved pipes that hold water to block sewer smells. Braided flexible hoses that connect taps to the water supply are checked for rust, fraying and kinks. Signs of past leaks, such as swollen cabinet bases or water stains, are noted even when the leak has stopped. Toilets that block during the test can be a sign of a deeper drain fault, with likely causes and costs set out in our guide to blocked toilet repairs. Slow kitchen sinks and basins have their own causes, from fat to hair, and the fixes are described on our page about blocked sink and basin repairs. Each fault is listed with its location so repair quotes can be compared later.
Showers in older bathrooms need a close look. Cracked grout, hollow-sounding tiles and stains on the wall behind the shower can all be signs of a leaking shower base or failed waterproofing under the tiles. These signs go in the report, although a waterproofing fault may need a specialist to confirm. Repairs range from regrouting to stripping and rebuilding the shower, and the options are compared in our guide to shower regrouting and leak repairs.
Hidden Leaks and Signs of Water Damage
Hidden leaks can run for months before anyone notices, and the damage can be costly once found. A simple first test is to turn off every tap and watch the water meter for movement over several minutes. If the meter keeps turning with everything off, water is escaping somewhere between the meter and the fixtures. From there, closing valves one at a time and checking the toilets, the hot water system and the outside taps narrows down the source. Leaks in a slab or wall may need a specialist with listening devices or heat cameras to find them.
Thermal imaging uses a camera that shows temperature differences, which can reveal damp areas or the path of a hot water pipe in a wall. Teledyne FLIR makes the Flir One handheld thermal camera, and plumbers may use a similar tool to scan walls and ceilings. Thermal imaging surveys are estimated at $250 to $550, and leak detection visits at $200 to $450. The images show where to look, but they do not prove a leak on their own. Detection methods, from meter tests to listening devices, are compared on our water leak detection page.
Water damage can show up some distance from the leak itself. Stained ceilings below bathrooms, peeling paint, mouldy skirting boards and a musty smell are worth noting on your own walk-through. Damp spaces under the floors of older homes can come from plumbing leaks, poor site drainage or both. Point these out to the plumber so the pipes closest to the damage are checked first.
Old Pipe Materials and Asbestos Cement
The age of a home gives clues about the pipes inside it. Older homes can have galvanised steel water pipes, clay sewer pipes and asbestos cement drainage, while newer homes are more likely to have copper and plastic. The plumber identifies the materials wherever pipes are exposed, such as under the house, in the roof space and at the meter. Mixed materials can show where earlier repairs or renovations have taken place. Pipe replacement is a large job, so knowing what is in the walls helps you judge the cost of upgrading later.
Asbestos cement was used in some plumbing products in Australian homes. The national Asbestos and Silica Safety and Eradication Agency lists asbestos cement water pipes as used from 1926 to 1990, and sewer and stormwater pipes made before 1990. Its product list also includes asbestos cement flue pipes on gas hot water systems and heaters, and asbestos wrapping or insulation on some hot water pipes. The NSW Government says asbestos is most likely in homes built before 1990, and it has been banned in Australia since 2003. Asbestos cement pipe can look like ordinary sand and cement pipe, so a plumber can only flag a suspected material for testing.
Do not let anyone cut, drill or break a suspected asbestos pipe during the inspection. Laboratory testing costs an estimated $50 to $150 for each sample, and the NSW Government suggests an assessment from a licensed asbestos assessor before renovating. If testing confirms asbestos, licensed removal may be needed before any pipe work, and the steps are outlined on our page about asbestos testing and inspection. Include the likely removal cost in your budget when you weigh the purchase.
Gas Appliances and Gas Lines
Gas cooktops, heaters and hot water systems form part of the plumbing in homes connected to natural gas or LPG, the bottled gas used where there is no mains supply. Any gas work in NSW, whatever its value, needs a licence, and a plumber may or may not also hold a gasfitting licence. The licence record on the NSW Government's register shows which types of work a tradesperson is licensed for. If gas appliances matter to your decision, check that the inspector is licensed for gas before booking. A gas inspection and pressure test, which checks the pipework for leaks, is estimated at $150 to $350.
Licensed gasfitters can check the appliances for safe operation, look at the flues and confirm that the line holds pressure. Older gas heaters and hot water units may come without service records, and a service is estimated at $100 to $200 per appliance. Any smell of gas during the visit should be reported to the agent and checked by a licensed gasfitter before the appliances are used. The work and its costs are described in more detail in our guides to gas fitting and gas leak repairs.
Compliance Certificates and Signs of Unrecorded Work
Renovations and additions should leave records that a buyer can request. Unless a job is exempt, the plumber must lodge a Notice of Work, which is a form describing the planned job, with Building Commission NSW or the local plumbing regulator before starting. Once the job is finished, the plumber issues a Certificate of Compliance confirming that the work meets the Plumbing and Drainage Act 2011, its Regulation and the Plumbing Code of Australia. The person who arranged the job, whether an owner or a builder, receives a copy. Minor jobs, like swapping tapware or replacing an existing water heater, are exempt from the Notice of Work step. Request copies of certificates through the selling agent for any recent bathroom, kitchen or drainage work.
Some signs suggest work was done without a licensed plumber. Pipes joined with mismatched fittings, garden hose used as permanent pipe and wastewater running into the stormwater system are examples a plumber may record. A laundry or toilet in a garage or granny flat with no matching sewer diagram is another warning sign. The Plumbing and Drainage Act 2011 requires plumbing products to be authorised, and the WaterMark scheme run by the Australian Building Codes Board certifies them, and approved products carry a WaterMark logo. Fittings without a WaterMark marking can be listed in the report for later replacement.
Unrecorded work does not always mean the sale should stop. The fix may be small, such as replacing a non-compliant fitting, or large, such as replacing a whole drain. Get a licensed plumber to price the fix, then discuss it with your conveyancer before exchange. Insurers and future buyers may request compliance records, so missing certificates can matter again when you sell.
Buying a Unit or Townhouse in a Strata Scheme
In a strata scheme, where each unit is owned separately but the building is shared, the plumbing is split between the owners corporation and each lot owner. The owners corporation is the body formed by every unit owner together, and it looks after common property, the shared parts of the building. Under the NSW Government's common property memorandum, the owners corporation is responsible for the main stopcock, or shut-off valve, to each unit and for pipes inside a common property wall, ceiling or floor. Lot owners look after pipes past the stopcock that serve their lot alone and sit outside common walls, plus their own taps, basins, toilets and baths. Hot water services that serve only one lot are also the lot owner's responsibility, although the scheme's by-laws, its own set of rules, and its records should be checked to confirm the split.
A plumbing inspection in a unit focuses on what the lot owner will pay to fix. The plumber checks the taps, toilets, hot water unit, flexible hoses and visible pipes inside the lot. Ceiling stains that suggest a leak from the unit above are recorded so you can raise them with the strata manager. The NSW Government advises buyers to check the by-laws, and a strata search report covers building defects and planned works. Strata reports, estimated at $250 to $450, can show whether the building has known plumbing defects or planned pipe works.
Shared hot water systems, pumps that lift water pressure to upper floors and pipes that serve more than one lot are owners corporation costs. Major building work can be paid from the capital works fund, the savings kept for big repairs, and the NSW Government warns that low levies could mean steep future fee rises. Weigh that warning if the strata records show ageing shared plumbing with little money set aside. Plumbers who maintain shared systems can be found through our strata and body corporate plumbing page.
Buying a Home to Rent Out
Investors have an extra reason to check the plumbing before buying. In NSW, a landlord can pass on water usage charges to a tenant only if the property meets set water efficiency measures. Kitchen sink and bathroom basin taps, and shower heads, must have a maximum flow rate of 9 litres per minute. Every toilet needs dual flush and at least a 3 star WELS rating, the national water efficiency label. Taps and toilets must not leak when a tenancy begins, and again whenever a measure is installed, repaired or upgraded.
The pre-purchase plumber can note which fittings are likely to fall short, so you can budget for upgrades before the first tenant moves in. Bath, laundry, washing machine, dishwasher and outdoor taps are exempt from the 9 litre flow limit. According to the NSW Government, a written statement or report from a licensed plumber is one form of evidence that fixtures meet the requirements. Caroma makes dual flush toilets, including models with its Smartflush flushing technology, which is one option where an old single flush toilet needs replacing. Our guide to rental water efficiency compliance explains the flow test, the evidence rules and the cost of upgrading.
Older taps and shower heads can be swapped for efficient models, and our guide to tap and mixer installation compares the options. Single flush toilets may need full replacement, which is priced in our guide to toilet installation. Budget for these items alongside any repairs the inspection finds. Planning the work before settlement helps the property start renting with fewer delays.
Rainwater Tanks, Septic Systems and Rural Blocks
Rural and semi-rural homes can rely on systems that town properties do not have. Rainwater tanks, pumps and filters may supply all of the home's water, and the plumber can check the pump, the pressure it delivers and the pipe connections. Homes off the town sewer have an on-site system, such as a septic tank or an aerated wastewater treatment system, which treats wastewater on the property. These systems may need a separate assessment, as Quote Yard's building inspection guide notes, so check whether the plumber can assess them. The checks and pumping costs for on-site systems are listed in our guide to septic tank services.
In regional NSW, local councils run the water and sewer services in many towns. Inspections of new plumbing work outside Newcastle, the Hunter, the Illawarra, the Blue Mountains and Sydney are handled by the local plumbing regulator. Your conveyancer can find which authority holds the drainage records for the address. Outside the cities, business-hours call-out fees are estimated at $60 to $120, and travel time to remote properties may be charged on top. Hunter buyers can request local quotes on our Newcastle and Hunter plumber page.
What the Written Report Should Contain
The report is what you take away from the visit, so agree on its format before the plumber arrives. It should name the plumber, give their licence number and record the address, the date and the time spent on site. Each item checked should have a short finding, a photo where useful and a note on how urgent any repair is. Drain footage should come as a video file or link, with each defect marked by its distance from the access point. Areas that could not be inspected should be listed with the reason, such as locked rooms or furniture in the way. Rough repair costs or a separate quote for urgent faults make the report far more useful when you negotiate.
Checklist for a Useful Plumbing Report
Plumber name, licence number, address and date. Findings for the water service, pressure reading, hot water system, each fixture, drains and the overflow relief gully.
Photos of each defect, drain footage with distances, areas not inspected and the reason, and an urgency rating with rough repair costs.
Ask for the report in a format you can forward to your conveyancer and lender.
Clear wording matters as much as the level of detail in the report. Phrases such as suspected defect or monitor should come with a plain explanation of what to watch for and when to act. If a term is unclear, request an explanation from the plumber before you rely on the report. Keep the report with your purchase documents, since it records the condition of the plumbing at the time you bought.
Using the Findings Before You Sign
Before exchange or the end of the cooling-off period, sort the findings by cost and urgency. Minor issues such as a dripping tap or a running cistern can be fixed cheaply after settlement. Larger defects, such as a cracked sewer line or a failing hot water system, can be priced and raised with the agent. Some buyers request that the vendor fixes the fault before settlement, while others negotiate a lower price and arrange the repair themselves. Your conveyancer can advise on how any agreed repair is written into the contract.
Repairs after settlement need the same care as any plumbing job. In NSW, any residential job above $5,000 including GST must have a written contract, with the deposit capped at 10 percent. The law also gives warranties of six years for major defects and two years for other defects. Choose a licensed plumber, get written quotes and keep the Certificate of Compliance when the work is done. Guides to each type of plumbing job, from drains to hot water, are listed on our NSW plumbing services hub.
Some faults found on the day cannot wait for settlement. Burst pipes, overflowing gullies or a strong smell of sewage can need urgent attention for the current owner. Tell the agent straight away so the vendor can call an emergency plumber. Record the problem in writing in case it affects the condition of the home at settlement.
Licences and Who Can Inspect
NSW law requires a licence for plumbing, draining and gasfitting work of any value. The Home Building Act 1989 is the law under which these licences are issued, and Building Commission NSW regulates them, on 13 27 00. To check a licence, search the NSW Government's Verify licence register in its section for contractors and tradespeople. Sydney Water says confident householders can change a tap washer themselves, but bigger problems, renovations and replacing toilets or hot water systems need a licensed plumber. For the inspection, choose a licensed plumber so the person testing the fittings understands how they should work.
Draining is a separate licensed category, so check that the plumber is licensed for drainage if they will recommend drain repairs. The same check applies to gasfitting where gas appliances are part of the visit. Write the licence number on your copy of the report and confirm it is current on the register. Whoever films the drain, only a licensed drainer can lawfully carry out the repairs that follow.
Getting Comparable Inspection Quotes
Clear details help each plumber quote the same job. Tell them the address, the age of the home, the number of bathrooms and toilets, and whether the property has gas, a pool, a rainwater tank or a septic system. Say whether you want the drains filmed, which lines to include, and whether you need a written report or footage only. Share the drainage diagram from the contract, any building report already received and the date by which you need the findings. For homes in Greater Sydney, post the job on our Sydney plumber page to receive local quotes.
Compare quotes by what they include, not only by price. Check whether the fee covers the call-out, the time on site, the camera, the locating and the written report. Find out how soon after the visit the report will arrive, since the cooling-off period keeps running. Confirm whether the plumber will give repair prices for any faults found, or whether those come as a separate quote. Low fees that leave out the report or the footage can cost more once those items are added.
Details to Send With Your Inspection Request
Address, age of the home, number of bathrooms and toilets, and whether there is gas, a pool, a rainwater tank or a septic system.
Drains to be filmed, report format, the drainage diagram from the contract, the access window and the date you need the findings.
Complete details help plumbers quote the same scope, so the prices can be compared fairly.
What to Look Out For in Pre-Purchase Plumbing Inspection Quotes
A low quote can leave out parts of the inspection, so read the scope before you compare prices. Be cautious of a plumber who offers an inspection and then pushes for major repair work on the same day, before you own the home. A quote that does not mention a written report, footage or the areas to be checked leaves you with little to rely on later. Refusal to give a licence number is a firm reason to look elsewhere, since licences can be checked online in minutes. Check that drain findings are backed by footage you can view yourself, not only a spoken summary. Avoid bookings so late that the report arrives after the cooling-off period ends.
Independence matters too, because the plumber is advising you on a large purchase. Before booking, check whether the plumber has any link to the vendor or the selling agent. Plumbers who will later quote for the repairs should keep the inspection findings separate from the sales pitch. If two plumbers report very different findings, a second camera inspection can settle the question at a modest cost. Keep copies of every quote, report and invoice with your purchase records.
Pre-Purchase Plumbing Inspectors in Every NSW Region
We connect home buyers, investors and strata buyers with licensed plumbers throughout New South Wales for pre-purchase plumbing checks, drain camera footage and hot water assessments. Post your job once and compare quotes from plumbers who work in your area.
▶ Sydney Inner City 18 areas
▶ Greater Sydney 25 areas
Western Sydney
South Western Sydney
Northern Sydney
The Hills District
Inner West
St George
▶ Sydney Coastal 23 areas
Northern Beaches
Eastern Suburbs
Harbour Suburbs
Sutherland Shire
▶ Hunter & Central Coast 19 areas
Central Coast
Hunter Valley
Port Stephens
▶ Illawarra & South Coast 18 areas
Illawarra
Shoalhaven
Sapphire Coast
▶ North Coast 19 areas
Mid North Coast
Coffs Coast
Northern Rivers
▶ Blue Mountains & Highlands 17 areas
Blue Mountains
Southern Highlands
▶ Regional NSW 21 areas
Central West
Riverina
New England
Far West
Pre-Purchase Plumbing Inspection FAQs
Is a plumbing inspection required when buying a home in NSW?
How much does a pre-purchase plumbing inspection cost in NSW?
Will my building inspector check the plumbing as well?
Can I book the plumbing inspection after I exchange contracts?
What if I am buying the property at auction?
How does a plumber work out the age of a hot water system?
What is a sewer service diagram and how do I get one?
Will the plumber tell me if there are asbestos pipes?
What should a strata buyer have the plumber check?
Can I use the plumbing report to negotiate on price?
More Pre-Purchase Inspections
Related Services
For Trades & Contractors - NSW
Licensed plumbers and drainers who carry out pre-purchase inspections can find new work on the NSW job leads board, with more listings under plumber jobs in NSW and drain plumber jobs.
Buying a Home in NSW?
Post your job and compare quotes from licensed NSW plumbers for pre-purchase plumbing inspections, drain camera footage and hot water checks.
Get Free Plumber QuotesAbout This Guide
This guide is general information only, and NSW property rules, water authority processes, product details and prices can change. Confirm requirements with your conveyancer, your water authority, Building Commission NSW and a licensed plumber before you rely on any inspection or start work.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.