Getting a Rental Ready to Bill Water?
Tell us which taps, showers and toilets need checking, and we'll connect you with licensed plumbers near you.
Typical Costs (2027 Estimates)
These are 2027 estimates for NSW, and the compliance check, written statement, shower heads and flow restrictors are quoted per job.
Rental Water Efficiency Compliance Services NSW - Get Local Quotes
NSW landlords can pass water usage charges on to tenants only when the rental meets a set of water efficiency measures. Since 23 March 2025, those measures include dual flush toilets with at least three stars under WELS, the national water rating label. Kitchen sink and bathroom basin taps, along with every shower head, must flow at no more than 9 litres per minute. The home also needs to be free of leaking taps and toilets when the tenancy starts and after any upgrade or repair. Laundry, bath, dishwasher, washing machine and outdoor taps sit outside the flow limit. A licensed plumber can test each fixture, fix what fails and give a written statement that serves as evidence. Tenants who are billed for water can ask the landlord for this evidence. A tenant can test a tap or shower by running it into a bucket for one minute, and the bucket should hold no more than 9 litres. Toilets are checked by measuring the water that refills the cistern, the tank behind the toilet, after each flush, and the water meter can show hidden leaks. Prices are 2027 estimates for NSW, taken from the price ranges on our plumbing guides, and the check itself is quoted per job. Owners of units, houses and granny flats can use the same steps, and tenants can use them to check their own home. Disputes go first to the landlord or agent, then to NSW Fair Trading, and then to NCAT, the state tribunal. Post your job on The Quote Yard to compare quotes from licensed local plumbers for a rental water efficiency check and any repairs.
At a Glance - NSW Rental Water Efficiency Measures (2027 Estimates)
| Fixture | Measure to Charge Water Usage | Exempt | 2027 Estimate (NSW) | Who Does the Work |
|---|---|---|---|---|
| Kitchen sink taps (cold and single mixer) | No more than 9 L per minute | No | Kitchen mixer replaced $200-$550 | Licensed plumber |
| Bathroom basin taps (cold and single mixer) | No more than 9 L per minute | No | Basin tap set replaced $200-$500 | Licensed plumber |
| Shower heads | No more than 9 L per minute | No | Quoted per job | Licensed plumber |
| Toilets | Dual flush, at least 3 WELS stars | No | Dual flush suite fitted $300-$1,500 | Licensed plumber |
| Dripping taps | None at the start of a tenancy or after upgrades | No | Washer $80-$180, cartridge $100-$250 | Householder for a washer, plumber for the rest |
| Running or leaking toilets | None at the start of a tenancy or after upgrades | No | Valve repair $120-$350 | Licensed plumber |
| Bath, laundry, washing machine, dishwasher and outdoor taps | No flow limit | Yes | Not needed to comply | Licensed plumber for any change |
| Compliance check and written statement | Accepted as evidence | Not applicable | Quoted per job | Licensed plumber |
Cost Depth: Checks, Repairs and Replacements
For 2027, fixing a running toilet valve should cost about $120 to $350, and replacing every valve inside the cistern about $200 to $450. Swapping a single flush toilet for a dual flush suite runs about $300 to $1,500 supplied and fitted. Tap washers cost about $80 to $180, and ceramic disc cartridges, the sealed valve inside a quarter turn tap, about $100 to $250.
No Quote Yard page publishes a price range for the check itself, the written statement, a new shower head or a flow restrictor, so each is quoted per job. Plumbers who charge by time cost about $90 to $180 an hour, plus a call-out fee of about $80 to $150 in business hours.
Every repair or replacement on this table is plumbing work, which needs a licence in NSW whatever its value, apart from a householder changing a tap washer. Prices are 2027 estimates and exclude after-hours rates.
What Rental Water Efficiency Compliance Means in NSW
Rental water efficiency compliance is the set of fixture standards a NSW rental must meet before the landlord can bill the tenant for water usage. The standards cover kitchen and basin taps, shower heads, toilets and leaks, and NSW Fair Trading publishes them on the NSW Government website. Under the Residential Tenancies Act 2010, usage charges can only be passed on when the home is separately metered, with its own water meter, or has water delivered by vehicle, and meets these measures. Without proof of compliance, the landlord has to pay the usage charges instead of billing the tenant. The rules do not stop a home being rented, but they decide who pays for the water used in it.
Water efficiency here means using fixtures that deliver enough water for daily needs without letting extra water run down the drain. Flow rate is the measure used for taps and showers, written as litres per minute. For toilets the test is whether the suite has two flush buttons and a WELS rating of at least three stars. WELS stands for the Water Efficiency Labelling and Standards scheme, which rates products with stars and shows their water use on a label. Leak-free fixtures are the final part, because a dripping tap or a toilet cistern that keeps running adds to the bill without anyone using it.
When the Rules Apply and When They Do Not
The measures matter whenever a landlord wants the tenant to pay usage charges. Four conditions, listed by NSW Fair Trading, must all be met before a tenant can be asked to pay for water usage. First, the property must be separately metered, or have its water delivered by vehicle, and it must meet the water efficiency measures. Next, the amount charged cannot be more than the water supplier billed the landlord. On top of that, the tenant must receive a copy of the relevant part of the bill or other evidence of the cost. If any one of these conditions is missing, the usage charge stays with the landlord.
Homes supplied by a water tank that is refilled by truck follow the same efficiency rules. At the start of the tenancy, the landlord should make sure the tank has water in it. During the tenancy the tenant pays to refill it, provided the home meets the water efficiency measures. Social housing tenants pay water usage under separate ministerial guidelines from the Department of Communities and Justice, so this guide applies to private rentals. Rainwater tanks that top up from the town water supply are a different set-up, handled by plumbers who do rainwater tank plumbing.
Who Pays Which Water Charges in a NSW Rental
Water bills in NSW have fixed parts and a usage part, and the rental rules treat them differently. The landlord pays all water supply service charges other than usage, and all sewerage service charges. Sewerage has one exception, because the tenant pays for pumping out a septic tank when it becomes full. Only the usage part can move to the tenant, and only when the efficiency measures and the other conditions are met.
| Charge on the Bill | Who Pays | Condition |
|---|---|---|
| Water supply service charge | Landlord | Always |
| Sewerage service charge | Landlord | Always, except septic pump-outs |
| Septic tank pump-out | Tenant | When the tank becomes full |
| Water usage | Tenant or landlord | Tenant pays only if separately metered and efficient |
| Water delivered by vehicle | Tenant refills during the tenancy | Tank full at the start, efficiency measures met |
| Usage rebates from the supplier | Passed on to the tenant | Whenever the tenant pays usage |
Any rebate the water supplier gives on usage charges must be passed on to the tenant. Water usage payments are made separately from rent, so a rent receipt never covers the water bill. Billing periods rarely line up with the start and end of a lease, which is why meter readings matter. Writing the water meter reading on the condition report at the start and end of each tenancy is the step NSW Fair Trading recommends. With a clear reading on the first day, a new tenant does not pay for water used by the previous occupant.
Kitchen and Basin Taps: The 9 Litre Limit
Inside the home, the kitchen sink and every bathroom hand basin are the taps the flow rule targets. Both cold water taps and single mixer taps at these outlets must deliver no more than 9 litres per minute. Single mixers are taps with one lever that blends hot and cold water through one spout. Older taps, such as separate hot and cold pillar taps or three piece sets with two handles and a spout, can flow well above that figure when fully open. Any tap that fails can be fixed by fitting a flow restrictor, a small insert that narrows the opening the water passes through, or by changing the aerator or the whole tap.
Aerators are the small screens at the end of the spout that mix air into the stream. Some aerators include a flow regulator, a part that holds the flow to a set rate even when the water pressure changes. Before fitting one, the plumber has to confirm the new part suits the tap, because aerator threads and sizes differ between brands. Replacing the whole tap makes sense when the old one also leaks or has worn handles. Plumbers who handle tap and mixer installation can confirm the WELS flow figure for a new model before it is bought.
Taps the Flow Limit Does Not Cover
The 9 litre limit does not apply to bathtub taps, laundry sinks, washing machine taps, dishwasher connections or outdoor taps. Flow from these outlets does not need testing, and the landlord does not need to fit restrictors to them. Landlords can leave them as they are when preparing for compliance, provided they are not leaking. The leak rule still covers every tap on the property, including the garden tap and the laundry taps. Even a dripping hose tap can fail a leak check, although its flow rate is exempt. Dishwashers and washing machines carry their own WELS labels, but the rental flow rule does not test them.
A bath spout beside the bathroom basin can look like a basin tap, but it falls under the bathtub exemption. The NSW list names bathtub taps as exempt, so a bath spout does not need testing for flow. Laundry sinks are exempt as well, so a laundry tap can keep its faster flow. Oliveri makes laundry sinks and says it has pressed them in Australia since 1947, and Clark makes laundry sinks alongside basins and tapware. Fitting a new laundry sink or tap still needs a licensed plumber, even though the flow rule does not apply to it. Parisi makes laundry mixers as well as kitchen mixers, and only the kitchen one falls under the flow limit.
Shower Heads in Rental Bathrooms
Every shower head in the rental must flow at no more than 9 litres per minute. Fixed wall shower heads, often called roses, handheld showers on a rail and overhead rain heads all count as shower heads for this rule. Large rain heads can exceed the limit, so check the WELS label or the maker's specification sheet before buying one. Methven makes the Kiri MK2 low flow shower rose, which it lists with a five star WELS rating.
Abey makes showers on rail as well as hand showers and fixed wall showers. Whichever type is chosen, look for a listed flow of 9 litres per minute or less on the maker's specification. Hansgrohe makes showers with its EcoSmart technology, which uses a flexible flow limiter to reduce flow to 8 or 6 litres per minute at 3 bar. Bar is a unit of water pressure, and 3 bar is about 300 kilopascals. Low flow heads work well where the water arrives from the street at good pressure, while homes with weak pressure may need the cause fixed first. Where pressure is weak, plumbers who offer low water pressure repairs can find the cause.
Dual Flush Toilets and the Three Star Minimum
From 23 March 2025, every toilet in a rental that bills water usage must be dual flush and carry at least three WELS stars. Dual flush toilets have two buttons, one for a full flush and one for a smaller half flush. Single flush toilets, including older suites with one lever, cannot meet this rule and need replacing. Suites with two buttons but fewer than three WELS stars also fail the rule. The star rating appears on the WELS label and on the maker's product page for the model.
Caroma makes the Luna Cleanflush close coupled toilet suite, which it rates at four WELS stars with a 4.5 litre full flush and a 3 litre half flush. Stylus makes the Prima II close coupled suite with the same four star rating and flush volumes. Seima makes the Chios Vortex Flush wall faced toilet, which sits flat against the wall and is rated at four WELS stars with a 4.5 litre and 3 litre flush. In a close coupled suite, the cistern sits directly on the back of the pan, the bowl part of the toilet. Swapping a suite in the same position is the simplest upgrade, while moving it turns the job into a larger toilet installation.
Leak Free at the Start and After Every Upgrade
The property must have no leaking taps or toilets at the start of the tenancy. That rule applies again after any water efficiency item is installed, repaired or upgraded during the tenancy. In practice, a leak includes any steady drip from a spout, water seeping from a tap body or a cistern that keeps running into the pan. Leaks under sinks and behind walls also add to the meter, even though the rule names taps and toilets.
Dripping taps are fixed with a new washer or a ceramic disc cartridge, the sealed valve inside a quarter turn tap. A plumber booked for leaking tap repairs can fix every dripping tap in the home during one visit. Running toilets are fixed by replacing the inlet valve that fills the cistern or the outlet valve that releases the flush. Cistern valves, seals and flush buttons can be replaced as part of toilet repairs. Sydney Water says confident householders can change a tap washer, and every other plumbing job needs a licensed plumber.
Measuring Tap and Shower Flow with a Bucket
NSW Fair Trading sets out a simple bucket test that tenants can run at home with a bucket and a timer. Place a bucket under the tap or shower head and turn it on to full flow for one minute. Turn the water off and measure how much is in the bucket with a measuring jug or the bucket's own markings. More than 9 litres in the bucket means the tap or shower is likely to be over the limit. Run the test once for each kitchen tap, basin tap and shower head in the home.
Use a timer on a phone, because a few seconds more or less can change the result. For a mixer tap, push the lever to its fully open position, since the rule assumes full flow. Showers on a rail can be tested by holding the handset inside the bucket so no water splashes out. Note the result for each outlet, along with the date and the room, in case the landlord asks for details. Results close to 9 litres can vary with pressure, so a plumber's check gives a firmer answer. Repeat the test if a result looks unusual, since a partly closed isolation valve, the small shut-off tap on the pipe under the sink, can lower the reading.
Checking a Toilet Flush by Refilling the Cistern
The second home test from NSW Fair Trading checks how much water a dual flush toilet uses per flush. Shut off the water valve that feeds the toilet, and mark the water line inside the cistern with a pencil. Press the full flush button, then pour measured water into the cistern until it reaches the mark again. For a full flush the refill should not exceed 6.5 litres, and for a half flush it should not exceed 3.5 litres. Repeat with the half flush button, and turn the water back on when finished.
Results above these figures may mean the toilet does not meet the three star rating. The test may not be possible for every toilet, such as suites with a cistern hidden in the wall. Those hidden cisterns are reached by taking off the flush button panel on the wall, so tenants should leave them to a plumber. Tenants with concerns after either test should contact the landlord or property manager in writing. Rest the cistern lid on a folded towel on the floor during the test, so it is not chipped or dropped.
Home Tests at a Glance
Taps and showers: run at full flow into a bucket for one minute, and the volume should not be more than 9 litres. Kitchen and basin taps are tested, while bath, laundry, washing machine, dishwasher and outdoor taps are exempt.
Toilets: turn off the water, mark the cistern water line, flush, and measure the refill. Full flush up to 6.5 litres and half flush up to 3.5 litres, as set out by NSW Fair Trading.
NSW Fair Trading notes that these home tests only indicate whether a fixture complies. For a firmer answer, a written statement from a licensed plumber is one of the forms of evidence it lists.
Using the Water Meter to Find Hidden Leaks
The water meter shows whether water is flowing somewhere while every tap is closed. Turn off all water-using appliances, write down the meter reading, and check it again after one hour without using any water. Any movement in the reading means water is escaping somewhere in the home or the garden. Comparing recent bills for a sudden increase is a second sign that something is leaking.
Inside, check toilets, showers, taps and the hoses behind washing machines and under sinks. Outside, look at the meter, the hot water system, garden sprinkler pipes, pool equipment and garden hoses. Green patches of grass in dry weather can mark an underground leak in the supply pipe. Leaks that cannot be found by looking call for water leak detection, where plumbers use listening devices and heat-sensing cameras. Old, rusted supply pipes that keep leaking may need water pipe replacement instead of repeated patch repairs.
Evidence of Compliance Tenants Can Ask For
The landlord must be able to show that the relevant taps, shower heads and toilets meet the measures. Evidence a tenant can ask for includes original receipts or packaging, and warranties or instruction manuals for the fixtures. The model name or registration number of the WELS-rated product also counts as evidence. A written statement from a licensed plumber who has done a water efficiency check is the fourth option.
| Evidence | What It Shows | Best Suited To |
|---|---|---|
| Receipts or packaging | The product bought and its WELS label | Recently installed fixtures |
| Warranties or instruction manuals | Model details and flow or flush data | Fixtures with paperwork kept on file |
| Model name or WELS registration number | The rated stars and flow from the registration | Fixtures with a visible model marking |
| Written statement from a licensed plumber | Measured results and whether each item meets the rules | Older fixtures with no paperwork |
Receipts and packaging work well for fixtures bought in the last few years and kept on file. Older homes may have no records at all, especially where taps were replaced by a previous owner. In that case a plumber's statement is the most complete evidence, because it records measured results. Before relying on a statement, tenants can check the plumber's licence on the public register. Keeping the statement with the lease file lets the landlord give a copy to each new tenant.
What a Plumber Checks During a Compliance Visit
Each compliance visit starts with a walk through every room that has a tap, shower or toilet. The plumber measures the flow at each kitchen and basin tap and at each shower head, using a measuring container or a flow gauge. Each toilet is checked for dual flush buttons, and its model is matched to a WELS rating where the marking can be read. Next comes a search for drips at every tap, including exempt ones, and for cisterns that keep running. Reading the meter shows whether water is moving while everything is turned off. Small faults can be fixed before the plumber leaves if the landlord approves the extra cost.
Here, a flow gauge means a cup or bag marked to show litres per minute when held under the outlet for a set time. Results can change with water pressure, so the plumber notes the conditions on the day. Any slow basin or kitchen drain noticed during the visit can be booked for blocked sink and basin repairs at the same time. Water pooling around the base of a toilet can mean a failed seal, which the plumber should record.
What the Plumber's Written Statement Should Record
According to NSW Fair Trading, the plumber's statement confirms that a water efficiency check was done and whether the items meet the requirements. Useful statements list each fixture by room, with its measured flow or its WELS rating. Each one also notes any leaks found and whether they were repaired during the visit or still need work. The statement should show the plumber's name, licence number, business details and the date of the check. Landlords can ask for a short covering note that lists the exempt taps, so tenants can see why they were not tested.
No set form is published for the statement, so the content matters more than the layout. Statements from several years ago may not reflect fixtures replaced since then. If a tap or shower head is changed later, ask the plumber who fits it to update the record. Keep the plumber's invoice with the statement, since it shows what was supplied and fitted. Property managers who handle several homes can ask for the same format at each property, which makes the files easier to compare.
Landlords should give the tenant a copy of the statement when the lease is signed or when the tenant asks for evidence. Sending it with the first water usage bill also shows the tenant why the charge is allowed. Where the statement lists an item still needing repair, attach the invoice for that repair once it is done. Statements written for a different property or a different owner should not be reused. Buyers of a tenanted home can ask the seller for earlier statements and receipts during the sale. Without them, the new owner needs a fresh check before billing the tenant for usage.
Fixing a Fixture That Fails the Check
Taps that flow too fast can be brought under the limit without replacing the whole kitchen or vanity. The plumber can fit a flow restrictor in the tap or its supply, swap the aerator for a flow regulated one, or replace the tap. Fienza makes the Sansa basin mixer, which it lists with a six star WELS rating and a flow of 3 litres per minute. Dorf makes the Kip basin mixer in a lead free version, which it lists at six WELS stars and 4.5 litres per minute.
Shower heads that fail are replaced, since restrictors in an old head can reduce the spray quality. Toilets that are single flush or rated below three stars are replaced with a compliant dual flush suite. Running cisterns can be repaired by replacing the inlet valve, the outlet valve or the whole cistern mechanism. Cracked cisterns and pans are replaced, since a crack cannot be sealed to the standard needed. Leaks at the base of the toilet can mean a failed seal under the pan, which the plumber reseats or replaces.
Strong water pressure from the street main can push flow over the limit even on newer taps. AS/NZS 3500.1, the Australian standard for water services, sets a maximum static pressure of 500 kPa (kilopascals, a unit of pressure) at outlets inside a building, other than fire service outlets. Where the street pressure is higher, a pressure limiting valve, which caps the pressure entering the home, is needed, and it can bring flow rates down at the same time. Static pressure is the pressure sitting in the pipes when no tap is open and no water is flowing. A plumber can test the pressure at an outside tap before deciding which fix suits each outlet. Fixing pressure first can save buying new taps that would have met the limit anyway.
Choosing Compliant Replacement Products
Every replacement fixture should carry a WELS label and WaterMark certification. WaterMark is the certification scheme for plumbing products, run by the Australian Building Codes Board. Under the Plumbing and Drainage Act 2011, plumbers in NSW must use authorised products, and WaterMark is how products are certified. Check the label on the box for the star rating and the litres per minute or litres per flush. Products sold online from overseas may have neither label, so confirm both before ordering.
Enware makes self-closing and time flow tapware, including taps listed to shut off by themselves after 7 seconds. These taps suit shared laundries and common areas in strata apartment buildings more than private kitchens. Taps that shut off suddenly can make the pipes bang, a fault that plumbers fix through water hammer repairs. Choose finishes and handles that suit tenants of all ages, such as lever handles that are easy to turn off fully. Buying the same model of tap or shower head for every rental makes later repairs simpler, since spare parts match. Keep one spare aerator and cartridge on file if the maker sells them separately.
Common Reasons Fixtures Fail a Compliance Check
Original taps in older kitchens and bathrooms can deliver far more than 9 litres per minute when opened fully. Single flush toilets with one lever or one button fail the toilet rule straight away, whatever their condition. Shower heads with large faces or several spray settings can exceed the limit on one of their settings. Worn tap washers and cartridges let water drip after the handle is closed, which fails the leak rule. Cistern valves that no longer seal let water trickle into the pan, which also counts as a leak.
Some fixtures fail because of the home rather than the product. High water pressure from the street main can push a compliant tap over its rated flow, since WELS ratings are tested under set conditions. Aerators clogged with grit can make a tap spray unevenly, and removing them to clean them can leave the flow uncontrolled. In some homes, a previous tenant or owner has removed a flow restrictor from a shower head to get a stronger spray. Each cause needs a different fix, so the plumber should note the reason beside each failed result. Knowing the reason also helps a landlord choose between a small repair and a full replacement.
Keeping Fixtures Compliant During a Tenancy
Compliance is not a single event, because taps wear, cisterns age and fixtures get replaced. The leak rule applies again whenever a water efficiency item is installed, repaired or upgraded during the tenancy. Any new drip or cistern that keeps refilling should be reported by the tenant in writing without delay. Landlords who act quickly on these reports keep the home eligible and stop wasted water adding to the tenant's bill.
Cleaning a shower head or aerator removes grit and scale that can make the spray uneven. Follow the maker's cleaning instructions, since some finishes are damaged by strong cleaning products. Before a new tenancy starts, run a quick bucket test on each outlet and look for drips under every sink. Record the results on the condition report together with the meter reading. This short check costs nothing and shows whether a plumber needs to visit before the new tenant moves in. If a fixture is replaced, file the receipt and WELS label details with the earlier plumber's statement.
Rental Compliance Price Estimates for 2027
Prices in this table are 2027 estimates for NSW, drawn from Quote Yard plumbing price pages. They cover the repairs and replacements that make a rental compliant, from washers to whole toilet suites. No published price range exists for the check itself, the written statement, a shower head swap or a flow restrictor, so each is quoted per job. Call-out and hourly rates apply on top where a plumber charges by time instead of a fixed price.
| Job | 2027 Estimate (NSW) | Main Price Factor |
|---|---|---|
| Tap washer replacement, single tap | $80-$180 | Tap type and access |
| Ceramic disc cartridge replacement | $100-$250 | Cartridge brand and stock |
| Standard tap replaced, supplied and fitted | $150-$450 | Tap chosen |
| Basin tap set replacement | $200-$500 | Two taps or a mixer |
| Kitchen mixer tap replacement | $200-$550 | Mixer style |
| Basin mixer swap, labour only | $100-$220 | Vanity access |
| Running toilet repair, inlet or outlet valve | $120-$350 | Valve type and parts |
| Dual flush outlet valve assembly, including call-out | $150-$350 | Cistern model |
| Full cistern mechanism replaced | $200-$450 | Cistern brand |
| Leak at the toilet base, pan collar | $200-$450 | Floor and pan condition |
| Dual flush close coupled suite, supplied and installed | $300-$1,500 | Suite chosen and pipe position |
| Compliance check and written statement | Quoted per job | Number of fixtures |
| Shower head replacement | Quoted per job | Head chosen and fitting size |
| Flow restrictor or aerator fitted | Quoted per job | Tap model |
Pricing Notes for Landlords
Call-out fees are estimated at $80 to $150 in business hours, and hourly rates at $90 to $180 across NSW. Regional call-outs are estimated at $60 to $120, and after-hours work adds 50% to 100% over standard rates.
Plumbers who supply the parts add a markup of about 10% to 30% over the trade price. A minimum charge of about one hour of labour is common, so grouping every fixture into one visit makes better use of that time.
All figures are 2027 estimates for NSW from the price ranges used across our plumbing guides, so confirm the final price in a written quote.
What Changes the Cost of Getting a Rental Compliant
The number of fixtures is the biggest factor, since each tap, shower and toilet is tested and recorded. One bedroom units with one bathroom take far less time than a house with two bathrooms and an ensuite. Older homes with original taps and single flush toilets need more replacements than homes renovated in recent years. Cisterns hidden inside the wall and taps mounted on the wall take longer to reach and repair. Travel adds to the price in rural areas, where regional call-out fees are estimated at $60 to $120.
Products chosen by the landlord make a large difference to the final total. Budget close coupled suites cost less than back-to-wall suites, which hide the pipes against the wall. Booking the check between tenancies avoids arranging access with a tenant and lets the plumber work without interruption. Combining the visit with other plumbing jobs spreads the call-out fee across more work. Landlords can compare hourly and call-out rates across the state with the plumber pricing guide.
Billing Tenants for Water Once the Home Complies
Once the measures are met and the home is separately metered, the landlord can ask the tenant to pay usage charges. The request must be made within 3 months of the water bill being issued. With the request goes a copy of the bill or the relevant part of it, and the tenant must have at least 21 days to pay. The amount charged cannot exceed what the water supplier billed for usage. Payments for water are kept separate from rent payments.
Where a bill covers days before the tenancy began, only the tenant's share of usage can be charged. Meter readings on the condition report make that share easy to work out. Tenants who think a charge is wrong should keep paying while the issue is resolved, to avoid a notice ending the lease for non-payment. Rebates on usage from the water supplier belong to the tenant who paid the usage. A short note with the bill copy that shows how the tenant's share was worked out lets the tenant check it. Tenants who remove or tamper with the efficiency measures must pay for water usage, and may have to pay to replace the items.
A Tenant's Checklist for Water Efficiency
Tenants can start by reading the lease and the condition report for any mention of water usage charges and the meter reading. Where the landlord bills usage, ask in writing for evidence that the taps, shower heads and toilets meet the measures. Run the bucket test on each kitchen and basin tap and each shower, and note the results. Check each toilet for two flush buttons and look for a WELS label or model number. Report any dripping tap or running toilet to the landlord or agent in writing and keep a copy.
Never swap a fixture without the landlord's written consent, since removing an efficiency item can make the tenant liable for costs. For a stronger shower, the tenant can ask the landlord to fit a different compliant model. Local tenants advice and advocacy services can help with questions before a dispute begins. Contact details for these services are listed on the NSW Government website alongside the rental rules. Keep all messages, photos and test results together in one place.
A Landlord's Plan for Upgrades Between Tenancies
The gap between tenants is the easiest time to upgrade fixtures that fail the measures. Ask a plumber to test every fixture, fix leaks and replace anything that fails, then issue a written statement. Record the meter reading on the new condition report on the first day of the lease. Plan replacements alongside the other jobs done between tenants through rental property maintenance, such as smoke alarm checks.
When a fixture fails mid-tenancy, choose a compliant replacement so the home stays eligible for usage billing. NSW Fair Trading advises landlords who replace showers, taps or toilets to choose items that meet the measures. Investors buying a rental can ask for the plumbing to be checked before settlement, the day the sale completes, through a pre-purchase plumbing inspection. That inspection can flag single flush toilets and high flow taps, so upgrade costs are known before the purchase. Keep a simple register of each fixture, its model and the date it was fitted. With this kind of register, a landlord can answer a tenant's evidence request quickly and avoid paying for a fresh check.
Units, Strata Buildings and Shared Meters
Units in older strata buildings may share one water meter across the whole building. Without a separate meter for the unit, the landlord cannot pass usage charges on to the tenant under the NSW conditions. Some buildings have sub-meters, which are separate meters for each unit, and owners should check how the building is billed before assuming usage can be charged. Tenants with questions about water charges where there is no separate meter can make a complaint through NSW Fair Trading.
Inside the unit, the landlord is the one who must show that the taps, showers and toilets comply. Pipes in walls and floors may be common property, meaning the shared parts of the building, so leaks there may fall to the owners corporation, the body of all owners that manages them. Building by-laws, the strata rules on plumbing work, access times and lift bookings, apply to compliance visits as well. Owners corporations can book strata and body corporate plumbing for leaks in shared pipes. Report leaks into a neighbouring unit to the strata manager as well as the landlord, since water can damage several units.
Visits inside a tenanted unit need access arranged with the tenant, subject to the minimum notice periods in the tenancy rules. Agree a time window in writing and tell the plumber about parking, lifts and building access. Some buildings require contractors to sign in with the building manager before starting work. Water shut-offs for a whole floor or for the building's main vertical pipes need the strata manager's approval and notice to other residents. A tap or toilet swap inside one unit can be shut off at the unit's own valves where they are fitted. Have the plumber check those isolation valves during the visit, since a valve that is stuck fast makes later repairs harder.
When a Water Fault Becomes an Urgent Repair
NSW lists several water faults as urgent repairs in a rental. These include a burst water service (the pipe bringing water into the home) or serious leak, a blocked or broken toilet, a failure of the water supply and a breakdown of the hot water service. If the tenant cannot reach the landlord or agent, the tenant can arrange the urgent repair and claim back up to $1,000. The work must be done by a licensed tradesperson, ideally one named in the tenancy agreement. Repayment from the landlord or agent is due within 14 days of the tenant's written notice and receipts.
A toilet that will not flush or keeps overflowing needs prompt help from blocked toilet repairs. For a burst pipe, turn off the water at the main tap first, then call an emergency plumber if water keeps flowing. Faults in the public water main or sewer main in Sydney are reported to Sydney Water on 13 20 90. Slow drips from a tap are not urgent repairs, so they go through the normal written repair request. Hot water faults are urgent as well, and a failed hot water service can be repaired through hot water services.
Disputes, NSW Fair Trading and NCAT
Tenants who think the efficiency measures are not met should raise it first with the landlord or agent in writing. Include the dates and results of any bucket or refill tests with that first letter. If the issue is not resolved, either party can contact NSW Fair Trading on 13 32 20, Monday to Friday, 8:30am to 5pm. Where a landlord will not do repairs, NSW Fair Trading may issue a rectification order, which directs the landlord to carry them out. A tenant can also apply to the NSW Civil and Administrative Tribunal (NCAT) if they believe the water efficiency requirements have not been met. Tenants with an NCAT hearing date can get advice from a local Tenants Advice and Advocacy Service before the hearing.
Written statements from a plumber are strong evidence in these disputes, because they record measured results by a licensed person. Photos of WELS labels, receipts and meter readings support either side's case. Tenants can ask for a copy of any statement the landlord relies on, together with the plumber's licence number. Keeping records from the first day of the tenancy helps settle a disagreement before it reaches a tribunal.
Licences, WaterMark and Contracts for Compliance Work
Plumbing work in NSW needs a licence regardless of the cost of the job. Licences are issued under the Home Building Act 1989, and Building Commission NSW regulates plumbers and can be reached on 13 27 00. Check any plumber's licence on the NSW Government Verify licence register before booking the visit. Tenants relying on a plumber's statement can use the same register to confirm the licence is current.
For larger upgrades, NSW requires a written contract for residential building work over $5,000 including GST. Deposits on such contracts are capped at 10% of the contract price. Warranties set by law, 6 years for major defects and 2 years for other defects, apply to residential building work. Compliance checks with a few small repairs fall well under the $5,000 contract threshold, but a full bathroom of new fixtures can reach it. Other repairs can be added to the same visit by posting them as plumbing services jobs.
Getting Comparable Compliance Quotes
Send each plumber the same list of fixtures, room by room, with photos of each tap, shower head and toilet. Mention whether the property has concealed cisterns or wall-mounted taps, since these take longer to reach. Ask each plumber whether the price includes the written statement and a meter leak check. Request separate prices for the check and for each likely repair, so the totals can be compared fairly. Confirm whether parts are supplied by the plumber or by the landlord, and who arranges access with the tenant.
Plumbers differ in how they price this work. Some charge a fixed fee for the check and quote repairs afterwards, while others charge by the hour for the whole visit. Add up the full expected cost under each approach before choosing. Check how long each price is valid, and keep every quote in writing. Property managers can book the check on the landlord's behalf and pass the statement on to the tenant.
What to Look Out For in Rental Water Efficiency Quotes
Quotes that promise a compliance statement without testing each fixture give no real evidence. Be cautious of a price that is far below the others and leaves out the leak check or the written statement. The quote should show the plumber's licence number and a business name that matches the licence. Avoid any offer to remove flow restrictors later, since tampering with efficiency items can shift costs to the tenant. Quotes that name no products for replacement toilets or taps leave the landlord unable to check their star ratings. Large upfront deposits are a warning sign, and NSW caps deposits at 10% for contracted residential work.
Look for a clear statement of which fixtures will be replaced and the model numbers of the new items. Check that new products carry WaterMark certification and a WELS rating that meets the measures. Ask what happens if a tap stuck fast or a cracked cistern is found once work begins. Confirm the plumber will update the statement after any repairs made during the visit. Raise any problem after the work with the plumber in writing, and keep copies of every message.
Compliance Plumbers in Sydney and Regional NSW
Landlords in Sydney can compare plumbers in Sydney for flow tests, cistern repairs and dual flush upgrades. In Newcastle and the Hunter, owners can post jobs for plumbers in Newcastle and the Hunter. Hunter Water runs an Undetected Leak Rebate, which NSW Fair Trading lists as a source of help with leaks. Sydney Water runs a program called WaterFix, which NSW Fair Trading also lists for help with leaks and water use.
Owners on the Central Coast can request quotes from Central Coast plumbers. In the Illawarra, rental owners can find compliance plumbers among plumbers in the Illawarra. Local councils run the water supply in many regional towns and send the water bill themselves. Landlords in those towns can check the council bill for the usage charge before passing it on. Group every rental in the same town into one booking, since the call-out and travel are charged once.
Rental Water Efficiency Plumbers in Every NSW Region
We connect landlords, property managers and tenants with licensed plumbers throughout New South Wales for flow tests, leak repairs, dual flush upgrades and written compliance statements. Post your job once and compare quotes from plumbers who work in your area.
▶ Sydney Inner City 18 areas
▶ Greater Sydney 25 areas
Western Sydney
South Western Sydney
Northern Sydney
The Hills District
Inner West
St George
▶ Sydney Coastal 23 areas
Northern Beaches
Eastern Suburbs
Harbour Suburbs
Sutherland Shire
▶ Hunter & Central Coast 19 areas
Central Coast
Hunter Valley
Port Stephens
▶ Illawarra & South Coast 18 areas
Illawarra
Shoalhaven
Sapphire Coast
▶ North Coast 19 areas
Mid North Coast
Coffs Coast
Northern Rivers
▶ Blue Mountains & Highlands 17 areas
Blue Mountains
Southern Highlands
▶ Regional NSW 21 areas
Central West
Riverina
New England
Far West
Rental Water Efficiency FAQs
Can a NSW landlord charge for water if the toilets are single flush?
Does the 9 litre limit apply to the laundry tap?
How do I test my shower flow without special tools?
What evidence can a tenant ask for?
How much does a rental water efficiency check cost?
Who pays the fixed water and sewerage charges in a rental?
Can a tenant remove a flow restrictor from the shower?
Is a dripping tap an urgent repair in NSW?
When must the landlord ask for water usage payment?
Where can a tenant go if the landlord will not fix non-compliant fixtures?
More Rental and Fixture Services
Related Services
For Trades & Contractors - NSW
Licensed plumbers who test rental fixtures, repair cisterns and write compliance statements can find current work on the NSW job leads board, along with plumber jobs in NSW and plumber jobs in Sydney.
Need a Rental Water Efficiency Check in NSW?
Post your job and compare quotes from licensed NSW plumbers for flow tests, leak repairs, dual flush upgrades and written compliance statements.
Get Free Plumber QuotesAbout This Guide
This guide is general information only, and NSW tenancy rules, product details and prices can change. Confirm current requirements with NSW Fair Trading, your water supplier and a licensed plumber before relying on them for billing or repairs.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.