Sink or Basin Not Draining?
Tell us which sink or basin is blocked, whether other drains are slow and what you have tried, and we'll connect you with licensed plumbers near you.
Typical Costs (2027 Estimates)
These are 2027 estimates for clearing blocked sinks, basins and laundry sinks in NSW, and they exclude replacement parts, pipe repairs and asbestos work unless a row says otherwise.
Blocked Sink and Basin Repair Services NSW - Get Local Quotes
Blocked sink and basin repairs in NSW clear kitchen sinks, bathroom basins and laundry sinks that drain slowly, gurgle or fill with dirty water. Kitchen sinks collect fat, food scraps and coffee grounds, basins collect hair and soap, and laundry sinks collect lint from washing machines. The blockage can sit in the trap, the water-filled bend under the fixture, in the pipe behind the wall or further down in the main drain. Depending on where it sits, a plumber may use a plunger, take the trap apart, feed a hand-turned or motorised cable along the pipe, or clean the pipe with a high-pressure water jet. Sydney Water asks households to put only water, detergent and soap down a sink, and it says blockages in private pipes need a licensed plumber. NSW requires a licence for any plumbing or draining work whatever it costs, and Sydney Water treats a tap washer as the kind of minor job a confident householder can do. Clearing the strainer and using a plunger are safe first steps for a householder, but opening the trap or the pipe is licensed plumbing work. Prices on this page are 2027 estimates, from $150 to $400 for one sink or basin in business hours to $250 to $900 for jetting a greasy line. A sink that blocks again within weeks may have a sagging pipe, too little slope or a missing air vent, which a camera inspection can confirm. Post your job on The Quote Yard to compare quotes from licensed NSW plumbers who clear blocked sinks, basins and laundry sinks in your area.
At a Glance - Blocked Sink and Basin Jobs and Costs in NSW (2027 Estimates)
| Job | 2027 Estimate (NSW) | Main Price Factor | Best Suited To |
|---|---|---|---|
| Sink, basin or shower drain cleared | $150-$400 | How far past the plughole it sits | One slow fixture in business hours |
| Simple blockage at the fixture | $100-$200 | Hand tools or drain cable, easy access | Hair or scraps close to the trap |
| Single fixture, after hours (Sydney) | $280-$550 | Time of call | An overflowing sink that cannot wait |
| Main drain cleared with an electric eel (motorised cable) | $250-$600+ | Line length and access | Several fixtures slow together |
| High-pressure water jetting | $250-$900 | Grease load and line length | Kitchen lines coated with fat |
| Camera added to a clearing visit | $200-$450 | Footage and report detail | Sinks that block again and again |
| Laundry drain and trap replacement | $200-$500 | Pipe material and wall access | Cracked or lint-choked sink pipework |
| Washing machine hose replacement | $80-$150 | Hose type and tap condition | Worn or kinked drain or inlet hoses |
| Call-out or minimum attendance | $80-$180 | Travel and first block of time on site | Visits where a fee applies |
Cost Depth: Fixture Clearing Versus Line Work
A blockage in the trap under one sink is a short visit, while grease along the pipe behind the wall or a fault in the main drain takes machines and more time. The plumber can only confirm which applies once the trap is open or a cable has been run.
Replacement sink outlets, pop-up plugs and traps have no published price range and are priced on quote, depending on the part and its finish. After-hours work is estimated at 1.5 to 2 times the standard rate.
Any plumbing or draining work in NSW needs a licence, whatever its cost. Prices are 2027 estimates and exclude pipe repairs and asbestos work unless a row says otherwise.
Sinks and Basins That Drain Slowly or Not at All
Blocked sinks and basins are fixtures whose wastewater drains slowly, stops draining or rises back up through the plughole. Kitchen sinks, bathroom basins and laundry sinks are the three household fixtures with a plughole, a waste fitting that holds the plug and a trap below. Each one collects a different mix of material, so the cause and the fix change from room to room. Toilets work differently, with the trap built into the pan, so see our guide to blocked toilet repairs in NSW for those. Showers and floor drains share some causes with basins, and the plumber can clear them on the same visit.
Sink and basin work is one part of the wider range of jobs on our NSW plumbing services hub. One slow fixture is a different job from a shared drain that has failed, and the price differs too. When several fixtures back up together or the outside gully overflows, start with our blocked drains guide. All prices here are 2027 estimates for NSW, drawn from the ranges published on other Quote Yard plumbing guides.
Before any work starts, the plumber needs to know where the water stops. Water that sits in the bowl without moving can mean a blockage close to the plughole or inside the trap. Slow draining followed by a gurgle can mean a partial blockage further along the pipe behind the wall. Water rising in one fixture when another is used can mean a shared pipe is blocked below both of them. Write down what you see in each case, because those details help the plumber bring the right equipment.
Kitchen Sinks: Fat, Food Scraps and Coffee Grounds
Kitchen sink blockages build up from fat, oil and grease poured or rinsed down the plughole. Fat is liquid when hot, but it cools and hardens on the inside of the pipe, and food scraps then stick to it. Sydney Water says to never pour fats, oils and grease down the drain. Its advice is to wipe greasy pans with a paper towel and put the towel in the bin before washing up. Fats and oils can be poured into a container, which goes in the bin once it is full. Coffee grounds belong in the bin or the compost, according to the same advice.
Sydney Water tells households that only water, detergent and soap should go down a kitchen sink. Scrape plates into the bin before washing, and keep a sink strainer, a small basket that sits in the plughole, in place while rinsing. Empty the strainer into the bin and not back into the sink. Each year, Sydney Water spends up to $27 million managing and clearing up to 20,000 blockages in its own network. Those figures relate to the public sewer, but the same habits protect the private pipes under your home.
Replacement strainers and basket wastes are sold separately from the sink itself, so they can be swapped without a full kitchen sink installation. Franke makes the DB448 Strainer Basket in stainless steel, and Nero Tapware makes a kitchen sink basket waste. Clark, whose kitchen and laundry sinks appear on Caroma's Australian website, makes a basket waste grate as a spare part. Basket wastes are sink outlets with a removable basket that catches scraps and closes the outlet when turned. Once the basket is lost or damaged, food passes straight into the trap, so replace it before the next blockage forms.
Dishwashers drain through a hose into the sink waste or into a fitting on the pipe under the sink, so their wastewater joins the same pipe. Food the machine does not catch can settle in that pipe along with scraps from the sink. Miele makes dishwashers and advises cleaning and emptying the filter combination regularly, or at least once a month, to remove food particles and debris. Check the manual for your own model, and see our dishwasher installation page if the drain hose connection needs to move.
Where a sink blocks again within weeks, the plumber may look at how the pipes were laid when the kitchen was built or renovated. Waste pipes with too little slope let grease settle, and a long run to the nearest drain gives it more room to build up. Changing that layout is a larger job than clearing a blockage. For new waste runs and relocated sinks, see our kitchen plumbing guide. Ask for any layout change to be priced separately from the clearing visit, so each cost is clear. Adding a food waste disposer changes what goes down that pipe, so ask how its fall suits one before booking a garbage disposal installation.
Double Bowls, Undermount Sinks and Other Layouts
Double bowl sinks join their two outlets below the benchtop before the water reaches one trap. Holman makes a 50 mm double bowl connector, which joins the two outlets, and a 50 mm dual dishwasher connector for the machine's hose. Because the bowls share a pipe, a blockage below the join slows both of them, and plunging one bowl only pushes water up the other. Seal the second plughole with its plug or a wet cloth before plunging, so the pressure goes towards the blockage. Plumbers check these joins first when both bowls slow down together. Should only one bowl drain slowly, the blockage is likely above the join and closer to that bowl's own waste.
Undermount sinks hang below a stone or timber benchtop, and their wastes can be harder to reach than those of a sink set into the top. Deep cupboards, drawers and filtered water units below the sink can also slow access to the trap. Empty the cupboard before the plumber arrives, and leave space to set down a bucket and tools. Butler's sinks and large laundry sinks hold more water, so lowering the level before work starts saves time and mess. Where a sink sits on an island bench, its waste may run under the floor, which affects how the plumber reaches the pipe beyond it.
Bathroom Basins: Hair, Soap and the Pop-Up Plug
Bathroom basins collect hair, which Sydney Water notes does not dissolve in water, along with soap, toothpaste and shaving residue. These materials wind together into a mat that catches more each time the basin is used. That mat forms first around the plug fitting and then inside the trap. Water slows over weeks before it stops, which gives time to act before the basin fills. Hair catchers sit over the plughole and hold hair back before it enters the waste, and they lift out for emptying.
Pop-up wastes are basin plugs that open and close when pressed, or when a lever behind the tap is moved. Their mechanism sits inside the outlet, where hair can wrap around the stem and hold the plug partly closed. Caroma makes a 40 mm pop up plug and waste for its own basins, and Nero Tapware makes pop up wastes in its accessories range. Some pop-up plugs lift out for cleaning, while others need the fitting undone from below. Undoing a fitting below the basin is plumbing work, so leave that part to a licensed plumber. Plugs that no longer seal or lift can be replaced during the same visit.
Basins with an overflow have a small hole near the rim that lets water escape into the waste if the bowl overfills. That channel can also collect soap and grime, which can cause a smell even when the basin drains well. During the visit, the plumber can flush the overflow channel while clearing the waste. For a new vanity or basin, compare options on our bathroom vanity and basin installation page.
Baths and showers in the same room can share a branch pipe with the basin. Hair from the shower can lodge where the shower and basin pipes meet, slowing both fixtures. Bath wastes have their own trap, which the plumber may reach through a removable panel at the side of the bath. When the shower floor holds water while the basin also slows, mention both in the booking. Clearing a shower waste is included in the same price band as a sink or basin in Quote Yard estimates. Floor drains that dry out and smell are a separate issue from a blockage, and the plumber can check them on the same visit.
Laundry Sinks, Lint and the Washing Machine Drain
Laundry sinks take the water a washing machine pumps out, along with fibres from clothes, towels and bedding. Those fibres, known as lint, mix with detergent residue and settle in the trap and the pipe beyond it. Fisher & Paykel makes front loader washers, and its user guide warns that washing underlays and sheepskins can produce enough lint to block the machine's pump. A blocked pump filter can also stop the washer draining, which can look like a blocked sink. Sand and soil from work clothes or beach towels add weight to the mix in the trap.
Washing machine makers set their own cleaning intervals for filters. LG makes front and top loading washing machines, and it advises cleaning the drain pump filter every six months and top loader lint filters after every two or three washes. Bosch makes washing machines and tells owners to disconnect the power, open the service flap and check the drain pump for foreign objects. Fisher & Paykel says to check and clean the pump filter when an onscreen alert appears or the washer is not draining. Electrolux makes washing machines too, and it suggests cleaning an external drain filter every two months to clear out fluff or objects. Cleaning these filters as the manual for your model directs is appliance care and not plumbing work, and it keeps lint inside the machine.
Drain hoses from washing machines can hook over the sink or connect to a standpipe, an upright pipe with its own trap. Water that backs up into the sink when the machine pumps out can mean lint has narrowed the trap or the pipe below. Laundry drain and trap replacement is estimated at $200 to $500 for 2027 in NSW. For new sinks, taps and floor wastes, see our laundry plumbing guide. Moving or reconnecting the machine itself is a separate job, so see our washing machine installation page for what that involves. If the old tub is cracked or too shallow for the hose, a laundry sink installation can be quoted on the same visit.
Laundries without a floor waste have nowhere for water to go if the sink overflows while the machine is running. Adding a floor waste to a laundry on a concrete slab is estimated at $600 to $1,500 for 2027, including the concrete work. On a timber floor, the same job is estimated at $400 to $900. Plumbers can quote for a floor waste during a clearing visit if the layout allows one.
Traps Under the Sink: P-Traps, S-Traps and Bottle Traps
Traps are the curved or chambered sections of pipe directly below a sink, basin or laundry sink. Each holds a small amount of water, called the water seal, which stops sewer gases rising into the room. Because the trap changes direction, it is also the first place where heavy or sticky material settles. P-traps leave the fixture and turn into the wall, while S-traps turn down through the floor. Bottle traps are compact cylinders fitted under basins, with a base that unscrews for cleaning.
Holman makes standard P traps, S traps and combination S and P traps in 40 mm and 50 mm sizes, along with trap repair kits. Meir makes a round bottle trap for 32 mm basin wastes in several finishes, and Nero Tapware makes bottle traps as part of its accessories range. Exposed bottle traps are chosen for looks as well as function, so a matching finish matters when one is replaced. Plastic traps can crack if overtightened, and metal ones can lose their sealing washers with age. Any leak that starts after a trap has been opened should go back to the plumber who opened it.
| Trap or Fitting | Where You Find It | What Collects There | What the Plumber Checks |
|---|---|---|---|
| P-trap | Kitchen sinks and wall-hung basins | Grease and food scraps | Slope of the pipe into the wall |
| S-trap | Fixtures that drain through the floor | Hair, lint and grit | Water seal and floor outlet |
| Bottle trap | Basins on vanities or wall brackets | Hair and soap | Base thread and seal washer |
| Laundry sink trap | Laundry sinks and standpipes | Lint and detergent residue | Hose fit and pipe size |
| Dishwasher connection | Below the kitchen sink | Food particles from the machine | Hose loop and connector seal |
Basins in spare bathrooms and sinks in holiday homes can sit unused for weeks. Over that time, the water seal in the trap can dry out and let sewer smells into the room. Running the tap for a short time refills the seal and stops the smell if the trap is sound. If the smell returns after the tap has been run, the trap seal, the air vent or the pipe may be faulty, and a plumber should check it.
Safe First Steps Before the Plumber Arrives
Stop using the blocked fixture, and turn off any dishwasher or washing machine that drains into it. Check whether other sinks, the shower and the toilet still drain normally, since the answer helps the plumber judge how far the blockage reaches. Lift out the strainer or basket and remove any food, hair or lint you can reach without tools. Sink plungers, the small cup type, can be placed over the plughole and pushed down and up to move water through the pipe. Hold a damp cloth over the overflow hole or the second bowl while plunging, so pressure does not escape through it.
Take care with chemical drain cleaners, which are sold to dissolve grease and hair. Product Safety Australia, run by the ACCC, the national consumer watchdog, lists caustic soda-based cleaners among household products that contain chemicals and poisons. Caustic liquid left in a blocked pipe can splash out when water rises from the plughole or when the trap is opened later. Anyone who has already used one should tell the plumber before work starts, so the plumber can protect skin and eyes. Store any leftover product out of reach in its original container. The NSW Poisons Information Centre answers on 13 11 26, 24 hours a day, if someone is exposed.
Changing a tap washer is the minor job Sydney Water says a confident householder can do, and bigger problems need a licensed plumber. NSW treats work on the pipes that collect and carry away sewage as sanitary plumbing, including repairs to pipes, fittings and fixtures. Undoing a trap, cutting a waste pipe or feeding a machine cable into the drain is part of that work. Keep home efforts to the plughole, the strainer and the plunger, and book a licensed plumber for anything below.
One Slow Fixture or Several: Reading the Pattern
Counting the fixtures affected helps locate the blockage. When only the kitchen sink is slow, the blockage is likely in that sink's own trap or branch pipe. Where the basin and bath in one bathroom slow together, they may share a branch pipe that is blocked below both. When sinks, showers and toilets across the house slow at once, the main drain is the more likely location. Sydney Water lists slow sinks, baths or toilets, gurgling floor drains and wastewater overflowing from the gully near an outside tap as signs of a blockage.
That gully near the outside tap is the overflow relief gully, a drain with a loose grate that lifts to release sewage outside the home. If that grate has lifted or water is spilling from it, the blockage is likely in the main line and not in one fixture. Turn off taps and appliances indoors, then ring a plumber, or ring Sydney Water on 13 20 90 if you suspect its pipes. Damage to the main line itself, such as roots or broken pipe, is a sewer repair and not a fixture job. Keep children and pets away from any sewage that has spilled in the yard. For camera checks and repair methods on that line, see our sewer line repairs guide.
Whose Pipe Is Blocked?
Under Sydney Water's advice, the owner looks after private wastewater pipes as far as the point where they join the Sydney Water network. Blockages in those private pipes need a licensed plumber, paid for by the owner.
Where a licensed plumber finds the blockage in Sydney Water's pipes, the plumber must report it, and the owner can claim reasonable out-of-pocket expenses. Overflows can be reported on 13 20 90 at any hour.
These points come from Sydney Water's wastewater blockage advice. Outside its area, contact your local water provider or council.
| What You Notice | Likely Location | Likely First Step |
|---|---|---|
| One sink drains slowly | That fixture's trap or waste | Plunger, then trap cleaned |
| Basin and bath slow together | Shared bathroom branch pipe | Cable fed along the shared pipe |
| Sink gurgles as the dishwasher empties | Kitchen trap or branch pipe | Check hose, then clear the trap |
| Sink fills as the washing machine empties | Sink trap or laundry branch | Clear lint from trap and pipe |
| Several rooms slow at once | Main drain or sewer line | Machine clearing or jetting |
| Outside gully grate lifted | Main line below the gully | Stop water use and call |
How Plumbers Clear Sink and Basin Blockages
Plumbers start with the simplest tool that can reach the blockage. Plungers force water back and forth to loosen a blockage close to the plughole. If plunging fails, the plumber places a bucket underneath, undoes the trap and cleans it by hand. Hair mats and grease plugs in the trap come out this way without any machine. Once the trap is refitted, the plumber runs water to check the seal and the flow.
Past the trap, the plumber feeds a cable along the pipe to reach the blockage. Hand augers are coiled steel cables in a drum, turned by hand, with a tip that bores through or hooks the blockage. Electric eel is the common name for a motorised drain cable that spins faster and reaches further. Rothenberger makes the R600 VarioClean, a battery-powered pipe cleaning machine it lists for pipes from 20 to 150 millimetres across. Some machines use short lengths of cable that join together, so the plumber can add length as the job needs. Cables cut a channel through grease, but they can leave a coating on the pipe walls.
High-pressure water jetting, also called hydro jetting, sends water through a hose to a nozzle that sprays in several directions. The spray scours grease from the pipe walls and flushes it down the line. Rothenberger makes the ROBLAST 5000 EFI, a jetting machine it lists for clearing grease, sediment and tree roots from drains. Jetting suits kitchen drain pipes that are coated in grease along their length. It needs a way into the pipe, such as an inspection opening, and it costs more than clearing with a cable.
Blockages that return soon after clearing need a camera inspection, which shows the inside of the pipe on a screen. The footage can reveal a sag, a crack, a broken joint or a buildup the cable missed. Filming the pipe during the clearing visit is estimated to add $200 to $450 for 2027 in NSW. For standalone inspections and written reports, compare prices on our drain camera inspection cost page.
What Happens During a Clearing Visit
On arrival, the plumber asks which fixtures are affected, what has been tried and whether any chemical has gone down the drain. Running water in nearby fixtures shows whether the problem is in one trap or further along the line. Before opening anything, the plumber lays down drop sheets and places a bucket under the trap. Stored items under the sink are best moved before the visit, so the cupboard is clear. Pets and children should stay out of the room while traps are open and cables are running.
Once the blockage is found, the plumber clears it with hand tools, a cable or a water jet, starting with the least forceful option. Anything that cannot be removed on the day, such as a broken piece of pipe, is noted for a follow-up quote. Debris pulled from the trap goes into a bucket or bag and leaves with the plumber, not down another drain. The plumber checks a refitted trap for drips with the tap running for a minute or two. Next, the plumber fills and drains the fixture several times to confirm the flow is back to normal. Watch this final test if you can, so you know how a clear drain behaves.
Before leaving, the plumber should explain what caused the blockage and whether it is likely to return. Questions to raise at this point include where the material came from, whether the pipe looked sound and what would stop it happening again. Itemised invoices list the call-out fee, time on site, any parts and any camera work. Keep the invoice and any photos together, since they help if the same fixture blocks again. Should the plumber recommend further work, ask for that in a written quote you can compare with others.
When the Branch Line Is the Problem
Branch lines are the pipes that run from a fixture's trap to the main drain, through the wall, the floor or the ground. Kitchen branch lines can run several metres before they join the main drain, and grease can coat the whole length. In homes built on a concrete slab, the branch line may be cast into the slab with no easy access. Homes on raised floors may have branch lines in the space under the floor, where the plumber can reach them. That access affects how long the job takes and which tools can be used.
Inspection openings are capped fittings on the pipe that let a plumber reach inside without cutting it. Find out from the plumber where the openings are, and keep them clear of paving, garden beds and stored items. Where no opening exists, the plumber may work from the plughole or remove the trap to get in. Adding an opening during the visit can make later clearing faster. New openings are licensed plumbing work, the same as the clearing itself. Ask for it as its own line in the quote, so you can decide whether to go ahead.
Broken, sagging or root-damaged branch lines need repair, since repeated clearing will not fix the pipe. Short sections can be dug up and replaced, while lines under slabs can sometimes be relined from inside. Relining places a resin-soaked liner inside the old pipe, where it hardens into a new pipe wall. Compare repair methods on our pipe relining and drain repairs page. Request camera footage before and after any repair, so you can see the result for yourself.
Older homes can have waste pipes made from materials that need extra care. National asbestos safety guidance says asbestos cement water and sewer pipes were installed between the 1920s and 1980s. Under SafeWork NSW guidance, high-pressure water jets should never be used on asbestos, which limits how a suspect pipe can be cleared. Tell the plumber the age of the home when booking, so the right clearing method is chosen. Testing a sample before anyone cuts or jets a suspect pipe is estimated at $50 to $150 for 2027.
Blocked Sink and Basin Prices in NSW (2027 Estimates)
Clearing a sink, basin or shower waste blockage is estimated at $150 to $400 for 2027 in NSW during business hours. One Quote Yard guide puts a simple blockage in an easy-to-reach fixture at $100 to $200, cleared with hand tools or an electric eel. The higher end covers blockages beyond the trap, longer pipe runs and extra time on site. Call-out or minimum attendance fees add a further $80 to $180. Business-hours labour across NSW is estimated at $90 to $180 per hour.
| Job | 2027 Estimate (NSW) | What Moves the Price |
|---|---|---|
| Sink, basin or shower waste blockage | $150-$400 | Distance from plughole to blockage |
| Simple blockage, hand tools or eel | $100-$200 | Easy access at the fixture |
| Single fixture, after hours (Sydney) | $280-$550 | Time of call and travel |
| Main drain cleared with an electric eel (motorised cable) | $250-$600+ | Pipe length and access point |
| High-pressure water jetting | $250-$900 | Grease load and line length |
| Camera footage during the clearing | $200-$450 | Length of pipe filmed |
| Laundry drain and trap replacement | $200-$500 | Pipe material and wall access |
| Washing machine hose replacement | $80-$150 | Hose type and tap condition |
| Travel to remote regional areas | $150-$400 | Kilometres beyond the regional centre |
After-hours, weekend and public holiday work is estimated at 1.5 to 2 times the standard rate. Sydney plumbers clearing one fixture after hours are estimated to charge $280 to $550. Clearing a main drain with an electric eel costs $250 to $600 or more on these estimates, and high-pressure jetting $250 to $900. Plumbers working more than 60 to 90 kilometres from a regional centre may add a travel charge of $150 to $400. Replacing a kitchen sink outlet, a basin pop-up plug or a trap has no published price range, so it is priced on quote. That price depends on the part chosen, its finish and whether the pipe behind it is sound.
Access to the trap affects how long a sink job takes. Packed cupboards, undermount sinks and traps hidden behind drawers all add minutes before the plumber can start. Clearing several fixtures in one visit avoids paying a separate call-out fee for each. Parts such as a new trap, waste or hose are charged on top of labour. Older pipes that crack when a trap is undone can turn a clearing into a small repair, so agree on how that will be priced.
Location also shapes the hourly rate behind each estimate. Sydney metro labour is estimated at $100 to $180 per hour for 2027, and regional NSW labour at $70 to $150. Regional call-out fees run from $60 to $120, against $80 to $180 in Sydney. Check whether a quoted call-out fee includes travel from the plumber's base to your town.
Quotes for a blocked fixture may be a fixed price or an hourly rate with a minimum charge. Fixed prices suit a simple trap clean, while an hourly rate suits a blockage of unknown depth. To compare rates across Sydney and regional areas, see our NSW plumber pricing guide. For drain jobs beyond a single fixture, see our blocked drain plumber cost page.
Why Some Sinks Keep Blocking
Sinks that block every few months have a cause beyond what goes down the plughole. Fall, the slope of a waste pipe, needs to be enough for water to carry solids away. Too little fall lets grease and lint settle, and a dip in the pipe holds water where material collects. Pipes that were extended during a renovation may have joins, bends or narrower sections that catch material. These faults show up clearly in a drain camera inspection, and the plumber can then quote to correct them.
Waste pipes need air to drain smoothly, which is why plumbing systems include vents, pipes that let air into the drain. When a vent is missing or blocked, draining water can pull the water seal out of a trap, causing gurgling and smells. Holman makes a 40/50 mm air admittance valve, a one-way vent that lets air in but keeps sewer gases out. Whether such a valve can be used is decided by the plumber under AS/NZS 3500, the national plumbing and drainage standard. Gurgling with no sign of a blockage is a detail to mention when booking.
At an estimated $150 to $400 per clearing, the cost of repeat visits for one sink builds up quickly. Keep each invoice, so the total spent on the same fixture is easy to see. Some causes, such as a sag in a pipe under a slab, can only be fixed by relining or replacing that section. Others, such as a missing vent or a poorly sloped trap arm, the short pipe between the trap and the wall, can be corrected in a shorter visit. After a second callout for the same sink, ask the plumber to put the likely cause and the repair options in writing. Those notes let you weigh one repair against paying for clearings year after year.
Licences, Paperwork and DIY Limits in NSW
Plumbing, draining and gasfitting work in NSW all need a licence or certificate, whatever the job costs. The rule applies to residential, commercial and industrial work alike. Building Commission NSW regulates plumbers and takes enquiries on 13 27 00. Before booking, check the plumber's name or licence number on the NSW Government's Verify licence register, under contractors and tradespeople. For renters, the NSW Government says a landlord may not have to repay a repair done by an unlicensed tradesperson.
Every plumbing and drainage job, once finished, needs a Certificate of Compliance, the plumber's record that the work meets the rules, according to NSW Government guidance. The plumber hands a copy to the person who arranged the job, such as the owner or a builder. Emergency jobs and minor work, such as swapping tapware, do not need a Notice of Work, the form a plumber lodges before some jobs start. At booking, find out whether a certificate will be issued for your job, and keep it with the invoice. Those records help if the same pipe gives trouble later or the home is sold. Plumbers in Newcastle and the Hunter, Sydney, the Illawarra and the Blue Mountains lodge these forms online through the MyInspections Gateway, and elsewhere with the local plumbing regulator.
Under the Plumbing and Drainage Act 2011, replacement traps, outlets and pipes must be authorised plumbing products. Products are approved under WaterMark, the national certification scheme for plumbing parts, which the Australian Building Codes Board runs. The Plumbing Code of Australia, Volume Three of the National Construction Code, and the AS/NZS 3500 standards set how the work is done. Look for the WaterMark logo on the packaging if you buy a part yourself. Check with the plumber before buying, because a part that does not fit the existing pipe adds time to the visit.
Blocked Sinks in Rentals and Strata Buildings
Urgent repairs listed by the NSW Government include a toilet that is blocked or broken, yet a blocked sink or basin does not appear. Blocked sinks are therefore handled as non-urgent repairs, unless the blockage causes a serious leak or flooding. Tenants should tell the landlord or agent in writing what needs fixing and by when, and follow up if there is no reply within a reasonable time. Tenants who arrange a non-urgent repair themselves need the landlord's written consent first to be repaid. Where the tenant caused the damage, the landlord may not have to pay for the repair.
Evidence helps settle who pays when a blocked sink in a rental is fixed. Photos of the material removed and a note from the plumber on its cause give both sides a clear record. Fat or food in the trap is a sign of how the sink was used, while a cracked or sagging pipe is a fault in the building itself. Ask the plumber to write the cause on the invoice in plain words. Landlords and agents can then settle the bill with the facts in front of them. Agents can also keep that record in the property file for the next routine inspection.
Landlords can cut repair calls by fitting strainers and hair catchers and by checking traps while the home is vacant. For routine checks between tenancies, see our rental property maintenance page. Landlords who pass on water usage charges must meet NSW water efficiency rules, so see our rental water efficiency compliance guide if a flow check is due. Repair disputes not resolved through NSW Fair Trading can go to NCAT, the NSW Civil and Administrative Tribunal. Tenants with a hearing date can get advice from their local Tenants Advice and Advocacy Service.
In strata buildings, who pays for pipes depends on the scheme and its by-laws, the building's own rules. Schemes that have not defined common property, the parts all owners share, can adopt the NSW Government's memorandum. That memorandum makes the lot owner, meaning the unit owner, responsible for the pipes and the S bend, or trap, beneath a sink, laundry sink or hand basin, and for those fixtures. Pipes within a common property wall, floor or ceiling, and floor drains or sewers in common property, fall to the owners corporation, the body all lot owners belong to. Before booking, check your by-laws and contact the strata manager, so the right party pays. For stacks, the upright pipes that serve several units, see our strata and body corporate plumbing page.
Water rising in your sink when a neighbour runs a tap or a machine is a sign that a shared pipe is blocked. In that case, the blockage is likely in a stack or pipe serving several lots, which can fall to the owners corporation. Report it to the strata manager or building manager straight away, in writing as well as by phone. Avoid booking your own plumber to cut into a shared pipe without the owners corporation's approval.
Night and Weekend Callouts for Sinks and Basins
Blocked sinks are inconvenient, but they can wait for business hours if other fixtures still work and nothing is overflowing. Use another sink in the meantime, and keep the dishwasher and washing machine off. Waiting avoids after-hours rates of 1.5 to 2 times the standard rate. Book the first business-hours slot and describe the problem fully, so the plumber arrives ready.
While you wait overnight, bail standing water from the sink into a bucket and pour it into a toilet that still flushes normally. Wipe up spills promptly, since water left on timber floors or cabinet bases can make them swell. Leave the strainer out and the cupboard under the sink empty, ready for the plumber's arrival. Note when the problem started and what you have tried, so you can brief the plumber quickly in the morning.
Call an emergency plumber when wastewater is overflowing onto floors, when sewage comes up through a fixture or when several fixtures have stopped at once. Turn off any appliance that is draining, and keep children and pets away from dirty water. Overflows from the main line outside can be reported to Sydney Water on 13 20 90 at any hour. For urgent callouts across the state, see our emergency plumber page. Emergency attendance is estimated at $180 to $350 for 2027, before any clearing work.
Keeping Sinks and Basins Clear Between Visits
Kitchens, bathrooms and laundries each block for different reasons, so each needs different habits. Kitchens need a container for cooled fat, paper towel for greasy pans and a strainer in the plughole. Bathroom basins stay clearer with a hair catcher and a pop-up plug that is cleaned whenever the basin is. For the laundry, clean the washing machine filters at the intervals the maker sets, and fit a lint catcher to a drain hose that hooks over the sink. Clean the dishwasher filter at the interval its maker recommends.
Paint should be wiped off brushes with a paper towel and put in the bin, with leftover paint taken to a council disposal centre, Sydney Water advises. Tile grout and plaster washed down a laundry sink during renovations can set hard inside the trap. Should a fixture slow again despite these habits, book a plumber before it stops completely. Note the date of each clearing, so any pattern is easy to show the plumber.
Booking a Plumber and Comparing Quotes
Clear booking requests help the plumber quote accurately and bring the right tools. List each fixture that is slow or blocked, the room it is in and how long the problem has lasted. Say whether other fixtures, the dishwasher or the washing machine are affected. Mention any chemical drain cleaner already used, and the age of the home if you know it. Attach photos of the trap under the sink and of any inspection openings or outdoor gully. State whether the home is a house, a townhouse or a unit in a strata scheme.
When comparing quotes, check whether each one is a fixed price or an hourly rate with a minimum charge. Ask whether the price includes a camera check if the blockage returns, and how long any workmanship guarantee lasts. Each quote should name the business, list its Australian Business Number (ABN) and give the plumber's licence number. Home building work over $5,000 including GST needs a written contract in NSW, which can apply to a larger job such as replacing a branch line. Compare quotes on the same scope, so the cheapest one is not missing a step.
What to Look Out For in Sink and Basin Quotes
Take care if a quote for one slow basin includes replacing the whole drain, with no camera footage to support it. Question a price that changes after arrival with no new finding behind it. Be wary of an offer to pour chemicals into the drain in place of clearing it, since chemicals cannot repair a broken pipe. Plumbers who will not give a licence number or an itemised invoice leave you with little to rely on. Avoid paying cash for any job that has no written scope or receipt.
Check under the sink for drips before the plumber leaves, since a badly refitted trap can leak into the cupboard. Jetting proposed for an older home without any question about the pipe material is a reason to pause. Question a plan for regular paid maintenance visits when the cause of the blockage has not been found. Compare at least two quotes for any repair beyond the clearing itself.
Other Plumbing Jobs Worth Adding to the Visit
Plumbers on site for a blocked sink can handle small jobs under the same call-out fee. To see which tap and mixer faults can be fixed during the visit, read our fixture repair guide for bathrooms and kitchens. If you plan to replace a kitchen or basin tap anyway, compare options on our tap and mixer installation guide first. Name each extra job when you book, so parts for all of them arrive in the van. Request a separate line on the invoice for each job, so the costs stay clear.
Weak flow from a tap is a water supply problem, not a drain problem, and it has different causes. Where old water pipes are the cause, see our water pipe replacement guide. For pressure that drops at every tap in the home, see our low water pressure repairs page. Tell the plumber which taps are weak, and whether hot and cold flows differ.
Buyers who notice slow drains at an open home can arrange a plumber's check before contracts are exchanged. To get a plumber's report on drains, taps and hot water before buying, see our pre-purchase plumbing inspection guide. Water stains in a sink cupboard that remain after the trap is fixed can come from a hidden supply leak. For that problem, see our water leak detection page. Fixing the source first protects the new cupboard base or flooring from the same damage.
Sink and Basin Plumbers in Every NSW Region
We connect households with licensed plumbers throughout New South Wales for blocked kitchen sinks, bathroom basins, laundry sinks and the pipes behind them. Post your job once and compare quotes from plumbers who work in your area.
▶ Sydney Inner City 18 areas
▶ Greater Sydney 25 areas
Western Sydney
South Western Sydney
Northern Sydney
The Hills District
Inner West
St George
▶ Sydney Coastal 23 areas
Northern Beaches
Eastern Suburbs
Harbour Suburbs
Sutherland Shire
▶ Hunter & Central Coast 19 areas
Central Coast
Hunter Valley
Port Stephens
▶ Illawarra & South Coast 18 areas
Illawarra
Shoalhaven
Sapphire Coast
▶ North Coast 19 areas
Mid North Coast
Coffs Coast
Northern Rivers
▶ Blue Mountains & Highlands 17 areas
Blue Mountains
Southern Highlands
▶ Regional NSW 21 areas
Central West
Riverina
New England
Far West
Blocked Sink and Basin FAQs
Can I use a plunger on a blocked kitchen sink?
Why is my basin slow even with the pop-up plug fully open?
Is a blocked sink an urgent repair in a NSW rental?
Who pays to clear a blocked sink in a strata unit?
Can I take the trap off under my sink myself?
Should I pour a chemical drain cleaner in before the plumber comes?
Why does my laundry sink fill up when the washing machine empties?
What does it cost to clear a blocked sink in NSW in 2027?
When does a blocked sink need a camera inspection?
How can I stop the dishwasher from blocking the kitchen sink?
More Kitchen, Laundry and Drain Services
Related Services
For Trades & Contractors - NSW
Plumbers who carry drain cables and jetters can find sink, basin and drain clearing work on the NSW job leads board, with more listings under plumber jobs in NSW and blocked drain jobs.
Need a Blocked Sink or Basin Cleared in NSW?
Post your job and compare quotes from licensed NSW plumbers for blocked kitchen sinks, bathroom basins and laundry sinks.
Get Free Plumber QuotesAbout This Guide
This guide is general information only, and water provider rules, NSW requirements and prices can change. Confirm current requirements with your water provider, the relevant NSW authority and a licensed plumber before work starts.
Looking for more services across New South Wales? View all available trade services.
Reviewed by The Quote Yard Editorial Team
How The Quote Yard Works
We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.