New Laundry Sink Needed?

Tell us about the old sink, the new one you want and the floor it stands on, and we'll connect you with licensed plumbers near you.

Get Free Plumber Quotes

Typical Costs (2027 Estimates)

Call-out fee (business hours)$80-$150
Plumber hourly rate (business hours)$90-$180/hr
Sink and cabinet, supplied and installed$350-$1,400
Laundry taps (pair), labour only$120-$250
Laundry drain and trap replacement$200-$500
New laundry fit-out$1,200-$3,500
Moving the sink to a new spot$1,800-$4,500

These figures are 2027 estimates for NSW homes. Benchtops, tiling, waterproofing and floor repairs are priced per job.

Laundry Sink Installation Services NSW - Get Local Quotes

Laundry sink installation in NSW covers fitting a new sink where an old one stood, adding a sink to a laundry that has none, or moving the sink to a better spot. Choices include a freestanding sink on a metal or cabinet base, a sink built into a cabinet with doors or drawers, and a bowl set into a benchtop, sitting on top or fixed below. Each type needs taps, a waste outlet, a trap (a water-filled bend that blocks sewer smells) and a drain connection, plus room for the washing machine hose to empty into the sink. Connecting the taps and the waste is plumbing work, so a licensed plumber must do it, even when you assemble the cabinet yourself. Using 2027 estimates for NSW, a sink and cabinet supplied and installed costs about $350 to $1,400. Labour for a pair of laundry taps is about $120 to $250, and moving the sink to a new position is estimated at $1,800 to $4,500. Price depends on whether the new sink lines up with the old pipes, the floor type, access under the house and any benchtop cutting. Older laundries can hide rusted pipes, damp floors and asbestos sheeting, so a plumber should see the room before giving a fixed price. Sinks range from compact 35 litre units for cupboard laundries to large bowls set into a stone bench, and the machine's drain hose height must suit the sink you pick. Strata owners and landlords also have building and tenancy rules to check before work starts. When the job is finished, the plumber must give you a Certificate of Compliance, the official work record, so ask for it with the invoice.

Laundry Sink Plumbers Across NSW

Licensed plumbers fit, replace and move laundry sinks in houses, units, garages and outdoor laundries across Greater Sydney, the Hunter, the Central Coast, the Illawarra and regional NSW. Describe the job once and we can put you in touch with up to three local plumbers for quotes you can compare.

Get Free Quotes

At a Glance - Laundry Sink Installation in NSW (2027 Estimates)

Job 2027 Estimate (NSW) Suits Disruption Paperwork to Keep
Like-for-like sink and cabinet swap $350-$1,400 Worn or rusted sink in the same spot A few hours Certificate of Compliance
New laundry taps (pair), labour $120-$250 Dripping or stiff old taps Short visit Tax invoice
Washing machine stops (pair) $180-$350 Leaking or seized machine taps Short visit Tax invoice
Drain and trap replacement $200-$500 Slow, smelly or cracked waste Sink out of use for the visit Tax invoice and photos
Hot water line to the laundry $350-$900 Cold-only or slow-warming sink Pipes run to the heater Certificate of Compliance
Floor waste, concrete slab $600-$1,500 No drain for spills or overflows Floor cut and patched Certificate of Compliance
Moving the sink or laundry bay $1,800-$4,500 New layout or relocated laundry One day or more Written quote and Certificate of Compliance
New laundry fit-out $1,200-$3,500 Laundry with no sink or drain yet Pipes first, sink fitted later Written contract if over $5,000

Cost Depth: Why Laundry Sink Prices Vary

The sink itself is only part of the price, and the condition of the pipes under it accounts for much of the rest. A sink and cabinet in the same spot is estimated at $350 to $1,400 supplied and installed, while drain and trap work adds $200 to $500 where the old fittings are worn.

Moving the sink is the most expensive of the common sink jobs. Plumbing for a new sink position is estimated at $1,800 to $4,500, with concrete slabs toward the upper end because the floor must be cut to lay a waste pipe with enough downhill slope.

All figures are 2027 estimates for NSW. Benchtops, tiling, cabinet work and regional travel can add to the final amount.

What a Laundry Sink Installation Covers

A laundry sink, sometimes called a laundry trough, is the deep bowl used for soaking, rinsing and hand washing. It also takes the water a washing machine pumps out, so the sink and its drain work together with the machine. Installing one means fixing the sink in place, fitting taps, joining the waste outlet to a trap and connecting the trap to the drain. Hot and cold water lines feed the taps, and isolation valves, small shut-off taps on each pipe, let you turn off the sink's water without shutting down the house. These steps are plumbing work, and you can compare the wider range of licensed plumbing jobs on our plumbing services in NSW hub.

People book this job in three situations, and each is priced a little differently. Like-for-like replacement swaps a worn sink for a new one in the same spot, using the existing pipes where they are sound. Adding a sink means running new water lines and a new waste to a laundry, garage or outdoor area that has never had one. Relocating a sink moves the pipes to suit a new layout, which can mean lifting floor coverings or opening walls. Each one needs a different amount of pipe work, so the same new sink can cost very different amounts to install. Telling the plumber which of these you need at the first contact helps them bring the right parts and allow enough time.

Laundry sink work overlaps with nearby jobs that have their own specialists. Read our guide to laundry plumbing in NSW for a full plan covering the sink, taps, drains and floor waste. For moving or reconnecting the washing machine, see our washing machine installation page. Where the sink is part of a full room makeover, compare trades and costs in our laundry renovation guide.

Laundry Sink Installation Prices for 2027

Plumbers price sink jobs by the hour or as a fixed quote, and the bands below give a guide for NSW homes. Business-hours visits carry a call-out fee of about $80 to $150, plus labour of about $90 to $180 an hour. Short jobs are commonly billed as a full hour of labour, according to our NSW plumbing price pages. All figures here are 2027 estimates, taken from Quote Yard NSW plumbing and laundry pages. Plumbers may add 10 to 30 percent to the trade price of materials they supply, so ask for the sink and taps on separate lines. Supplying your own sink can lower the materials line, though the plumber may not warrant a product they did not choose.

Laundry Sink Work 2027 Estimate (NSW) Main Price Factor
Sink and cabinet, supplied and installed $350-$1,400 Sink size, cabinet type and pipe condition
Sink and cabinet unit only (45 or 70 litres) $150-$600 Brand, material and doors or drawers
Laundry taps (pair), labour only $120-$250 Rim, bench or wall mounting
Laundry pillar tap pair, product only $80-$200 Brand and finish
Washing machine stops (pair), replaced $180-$350 Access and valve condition
Laundry sink tap repair $120-$250 Washer or cartridge type
Laundry drain and trap replacement $200-$500 Pipe material and access
Extra valve work during a swap $100-$200 Number of seized valves
Hot water line to the laundry (new run) $350-$900 Distance from the water heater
Moving the sink or laundry bay $1,800-$4,500 Floor type and drain position
Pump-assisted drainage $800-$2,200 Pump type and power supply
New laundry fit-out (sink, taps, drain, waste) $1,200-$3,500 Existing pipes and layout

The sink and cabinet band is wide because the products range from basic stainless steel units to tall cabinets with soft-close drawers. On its own, a standard 45 or 70 litre sink and cabinet unit is estimated at $150 to $600 to buy. Pillar taps, the separate hot and cold taps that stand on the sink rim, are estimated at $80 to $200 a pair to buy. If the plumber finds stuck shut-off valves during a replacement, freeing or replacing them adds about $100 to $200. Adding these bands gives a rough budget, while the plumber's written quote after seeing the room is the figure to rely on.

Sink and washing machine work can be booked together, and our laundry pages give separate bands for the machine side. Connecting a washing machine to the existing machine taps costs about $80 to $150, and an installation with new taps about $300 to $500. New washing machine plumbing points, meaning fresh water lines and a drain for the machine, are estimated at $400 to $800. A full new laundry fit-out with sink, taps, drain and waste comes to about $1,200 to $3,500. Doing the sink and the machine connections in one visit avoids paying a second call-out fee.

Simple totals help when you are setting a budget for a straight swap. Suppose a plumber replaces a rusted sink with a new sink and cabinet in the same spot and fits new pillar taps. Start with the sink and cabinet band of $350 to $1,400 supplied and installed, then add tap labour at $120 to $250. Next add the pillar taps themselves at $80 to $200 a pair, plus any valve work and the call-out fee. Each band is a 2027 estimate, so treat the total as a starting budget and not as a quote. For hourly rates and call-out fees across NSW regions, see our plumber pricing guide for NSW.

Freestanding, Cabinet, Inset and Undermount Sinks

Laundry sinks come in four broad layouts, and each layout needs a different amount of carpentry and benchtop work. Freestanding sinks sit on legs or a metal frame, leaving the pipes visible underneath and the floor easy to clean. Cabinet sinks combine the bowl with a cupboard below, which hides the pipes and adds storage for detergents and buckets. Inset sinks drop into a hole cut in a benchtop, with the rim of the bowl resting on the bench surface. Undermount sinks are fixed below the benchtop, so water and dirt can be wiped from the bench straight into the bowl. The last two need a benchtop and cabinet built to suit, so a cabinet maker or kitchen installer may work alongside the plumber.

Clark makes the Eureka 35 Litre Compact Tub and Cabinet, a combined unit sized for small laundries. Oliveri, which says it has been making sinks in Australia since 1947, offers pressed bowl models for both the laundry and the kitchen. Abey also sells laundry sinks, and its laundry page describes undermount installation, where the sink is hidden below the benchtop. Meir makes laundry sinks as well as matching mixers and taps, so the bowl and tapware can come from one range. Compact units suit cupboards, hallways and apartment laundries where the machine sits beside the sink in a narrow space.

Choosing between the layouts depends on space, budget and how you use the laundry each week. Freestanding and cabinet sinks are the quickest to swap, since they stand on the floor and need no new benchtop. Inset and undermount sinks suit laundries with a long bench for folding, and they can match a kitchen style. They cost more overall, because the benchtop must be cut to the sink's template and the cabinet built around it. Freestanding sinks on legs also make it easy to see a leak early, since nothing hides the pipes below the bowl. For built-in cabinets and benches, compare cabinet options and costs on our laundry cabinetry page.

Bowl Size, Depth and Sink Materials

Sink capacity is listed in litres, with small compact sinks around 30 to 35 litres and larger bowls around 45 to 70 litres. Larger bowls suit soaking bedding, washing muddy boots and filling buckets, while a compact sink saves floor space. Depth matters as much as capacity, because a deep bowl stops water splashing out when the machine pumps out hard. Measure the width available beside the machine and the height under any overhead cupboards before choosing a model. Allow room to open the cabinet doors and to reach the shut-off valves behind them once everything is in place.

Stainless steel sinks resist stains, hot water and the knocks of daily use, and they suit busy family laundries. Oliveri makes Spectra sinks in coloured stainless steel and describes them as suited to the kitchen or the laundry. Fienza makes laundry sinks as a separate range from its kitchen sinks and cleaners sinks. Polymer and ceramic sinks are also sold, and each has its own care instructions from the maker. Ceramic bowls look like a kitchen or bathroom basin, though they can chip if a heavy bucket is dropped into them. Read the maker's care guide before using bleach or strong cleaners, since some finishes can mark or dull.

Tap holes, overflow openings and bypass openings are punched or moulded into the sink during manufacture. Adding a hole later means cutting the bowl, so it is simpler to choose the right layout at the start. Check the number and position of tap holes before you buy, so the sink suits the taps you plan to fit. Some sinks have no tap holes at all, which suits taps mounted on the wall above the bowl. Order the sink early, since the plumber needs its exact dimensions and the cabinet maker needs its cut-out template.

Sinks for Cupboard, Hallway and Apartment Laundries

Laundries in apartments and newer homes can be set inside a cupboard or along a hallway wall, with doors that close over them. Space is tight, so the sink, the machine and sometimes a dryer have to share a small floor area. Compact sinks of 30 to 35 litres sit beside the machine, while a narrow bowl set into a bench can sit above a cupboard. Measure the depth inside the cupboard as well as the width, since doors need to close over the taps and hoses. Leave a way to reach the washing machine stops without pulling the machine out, so you can turn them off quickly if a hose leaks.

Cupboard laundries trap moisture, and steam from hot washes can damage doors and benchtops over time. Ventilation, such as louvred doors or a fan, helps the space dry out between loads. Small leaks in a closed cupboard can go unnoticed, so check under the sink and behind the machine every few months. Braided hoses that join the sink taps to the water pipes can also fail with age, so ask about flexible hose replacement while the sink is being fitted. Where the laundry sits above another unit, an overflow or burst hose can damage the ceiling below, so plan drainage with care.

Tap Holes, Wall Taps and Washing Machine Stops

Laundry taps can stand on the sink rim, sit on the bench beside the bowl, or come out of the wall above it. Rim-mounted pillar taps are the traditional choice, with one tap for hot water and one for cold. Single lever mixers blend hot and cold water through one spout, and they suit people who find twin taps hard to turn. Wall-mounted taps keep the sink rim clear and free up the bench, but the pipes must be set in the wall at the right height. Parisi makes laundry mixers in its kitchen and laundry range, and Abey makes laundry spouts and wall top assemblies. A wall top assembly is the set of tap bodies and handles fixed into the wall, with a separate spout over the sink.

Washing machine stops are the two small taps that feed the machine's hot and cold hoses. Nero makes washing machine stops as a separate product line next to its kitchen and laundry mixers. These stops stay open while the machine is in use, so they need to turn off fully and hold without dripping. Loud knocking in the pipes each time the machine stops filling is worth fixing through water hammer and noisy pipe repair. Replacing a pair of washing machine stops is estimated at $180 to $350, and you can compare tap styles in our tap and mixer installation guide.

Tap position affects how easily you can fill a bucket, rinse a mop and reach the hoses at the back of the machine. Check that the spout reaches well into the bowl, so water lands in the sink and not on the rim. Swivel spouts can be turned aside when you need room to lower a large bucket or basket into the bowl. Leave enough height between the spout and the bowl to fit a bucket under it. Plan stop positions where the hoses run without kinking and where you can reach the handles without moving the machine. Labour to fit a pair of laundry taps is estimated at $120 to $250, separate from the cost of the taps themselves.

Bypass Kits, Overflows and the Machine Drain Hose

Washing machines pump their water out through a drain hose, which either hooks over the sink rim or feeds a standpipe. A standpipe is an upright pipe with its own trap, set against the wall so the hose drops into the top of it. Some sinks include a bypass, a separate opening at the back that sends the hose water straight to the waste without filling the bowl. An overflow is an opening near the top of the bowl that drains water away before it can spill over the rim. Neither feature replaces the need to keep the trap and waste clear, since lint from the wash still flows through them.

Machine makers set their own heights for the end of the drain hose, and the sink has to suit them. Fisher & Paykel makes top loading washers, and its installation guide says the sink or standpipe should be at least 900 mm high. That guide lists 1200 mm as the maximum and recommends 1000 mm, warning that a lower outlet can let water drain out of the washer while it is still filling. LG makes washing machines too, and its Australian installation guide sets a drain hose height of 90 cm to 120 cm for top loading pump models. Check the guide for your own model before you buy a low or compact sink, and give the figure to the plumber.

Front loaders have their own drain hose rules in each maker's guide, so read the section for your exact model. Buying a new machine and a new sink together is a good moment to check that the two suit each other. Store the machine's installation guide in the laundry drawer, since the plumber may need it on the day. If the hose will not reach the sink without stretching, ask the plumber about a standpipe closer to the machine instead.

The Fisher & Paykel guide also asks owners to secure the hose guide so it cannot slip off the sink or standpipe. It says the hose connection must not be airtight, again so water is not drawn out while filling, and that no more than 20 mm of hose should be exposed. The same guide reminds owners to check that the sink or standpipe stays free of lint and other obstructions. Dirty water rising in the sink when the machine empties can mean a partly blocked trap, and you can read about the causes in our guide to blocked sink and basin repairs.

Wastes, Traps and the Drain Below the Sink

The waste is the outlet fitting in the base of the bowl, with a grate or plug that stops large items going down. Below it sits the trap, a curved section of pipe that holds water to block sewer gases from rising into the room. The trap connects to a waste pipe that runs through the floor or wall to the drain outside. New sinks can reuse the old pipe below the floor if it is sound, though the plumber may renew the trap and fittings above it. Laundry drain and trap replacement is estimated at $200 to $500, and the plumber should state whether it is included.

Old laundries can have galvanised steel or early plastic pipes under the sink, and these can crack or corrode with age. Plumbers who find damaged pipe when the old sink comes out should stop and show you before replacing it. Lining the new outlet up with the old drain position keeps the job simple and the price near the lower end. If the new sink's outlet sits in a different spot, the waste pipe may need extending or rerouting under the floor. Supply pipes that are rusting or leaking behind the sink can be renewed during the visit, with more detail in our guide to water pipe replacement. Request photos of any pipe that is replaced, so you have a record of what was behind the old cabinet.

Traps only block smells while they hold water, so a sink that sits unused for weeks can let a sewer odour into the laundry. Running the tap for a few seconds each week refills the trap in a spare or rarely used sink. Gurgling from the sink when the machine empties can mean the drain is partly blocked or that air cannot move freely through the pipes. Water rising in the bowl during a pump-out can have the same causes, and both are worth reporting when you book. Testing the drain while the sink is out is easier than working around a fixed cabinet later. Mention any past blockages too, including any blocked toilet repairs, since the sink and toilet often join the same sewer line.

Floor Wastes and Overflowing Sinks

A floor waste is a drain set into the floor, with a grate on top, that carries away water spilled on the laundry floor. It gives water somewhere to go if the sink overflows, a hose slips off, or a machine hose bursts while nobody is home. Allproof makes tile floor wastes for tiled kitchens, laundry rooms, bathrooms and showers, sold through its Australian site. Whether a floor waste is needed depends on the layout and the work being done, so ask the plumber what applies to your laundry.

Adding a floor waste to a laundry on a concrete slab is estimated at $600 to $1,500, including the concrete work. On a timber floor, the same job is estimated at $400 to $900, since the pipe can run in the space below. Both figures cover the drain and floor work, not new tiles over the whole room. Floor wastes only help if the floor slopes toward them, so tiling and waterproofing have to be planned together. Laundries upstairs or over finished rooms carry more risk from an overflow, which makes a floor waste more valuable there. Waterproofing a laundry floor is specialist work, so book it through our waterproofing page if the floor needs it.

Replacing a Cracked, Rusted or Loose Sink

Sinks wear out in a few ways, and each sign needs a different fix. Rust spots on an old steel sink or cabinet frame can spread until the metal weakens or leaks. Cracks in a polymer or ceramic bowl tend to grow with hot water and weight, and they can leak into the cabinet. Loose sinks that rock when you lean on them may only need refixing, though water damage to the cabinet floor can be the cause. Leaks around the waste outlet can come from a failed seal, which a plumber can renew without replacing the bowl.

Repair suits a sound sink with a single fault, while replacement suits a sink that is rusting through or cracked. Tap leaks are a separate repair, and a laundry sink tap repair is estimated at $120 to $250 for a washer or cartridge. A cartridge is the sealed valve inside a lever mixer that controls flow and temperature, and it can be swapped without removing the tap. Advice from Sydney Water says confident householders can change a tap washer, and that bigger problems need a licensed plumber. Water stains on the floor or skirting near the sink are worth checking soon, since hidden leaks can rot timber floors. If damp keeps appearing and the source is unclear, read how plumbers trace it on our water leak detection page.

Clark makes an S45L cabinet without floor as a spare part, so a worn cabinet does not always mean buying a whole new sink. Spare parts like this depend on the maker and model, so note the brand and size of your sink before you call. Your plumber can check whether parts are still sold for your model before you commit to a full replacement. Keep the old sink's dimensions too, since a new sink of the same size makes the swap quicker and cheaper.

Moving a Sink to a New Spot

Moving a sink to the other side of the laundry, or into a cupboard, changes the water lines and the drain. The plumber has to run new hot and cold pipes to the new spot and extend the waste pipe to reach the drain. On a timber floor with good access underneath, the pipes can run below the floor with little disturbance to the room. Where the laundry sits on a concrete slab, the floor may need cutting to lay a new waste pipe at the right slope, which adds concrete and tiling work. Two-storey homes add more work, since pipes for an upstairs laundry run through floor and ceiling spaces. Plumbing to move the sink or laundry bay is estimated at $1,800 to $4,500, separate from benchtops, tiles and cabinets.

Fall is the slope a waste pipe needs so water flows downhill to the drain without pooling. Sinks placed far from the existing drain may not allow enough fall, which limits where they can go. The longer the run, the more height the pipe loses on the way, so a long run may need a lower drain connection or a pump. In that case the plumber may suggest a pump-assisted drain, estimated at $800 to $2,200, or a different position. Have the plumber walk the route with you and mark where pipes will run before any floor is cut. Marking the route also shows where you should not drill or nail later when fitting shelves or skirting.

Kitchen and laundry plumbing sometimes share walls, so a combined renovation can save time if both are planned together. If you are also changing the kitchen sink, plan that side of the work with our guide to kitchen sink installation. Coordinate the order of trades, since the plumber needs to rough in pipes before walls are lined and tiles go on. Rough-in means fitting the pipes inside walls and floors before the finishes cover them. The plumber then returns to fit the sink and taps once the cabinets and benchtops are installed.

Benchtops, Cabinets and Splashbacks Around the Sink

Inset and undermount sinks need a benchtop cut to the sink maker's template, and the cut must be exact. Laminate benchtops in a laundry are estimated at $450 to $1,100, and stone or porcelain at $900 to $3,200. Caesarstone makes mineral and porcelain surfaces for benchtops, and Laminex makes ReadyFit benchtops. Stone tops are cut by a stonemason, and you can find that trade through our page on laundry stone benchtops. Agree who orders the sink, who holds the template and who seals the edge between bowl and bench before work starts. Have the sink on site when the bench is measured, so the cut-out matches the real bowl and not a catalogue drawing.

Cabinets under a laundry sink sit near water every day, so the board they are built from matters. Laminex makes moisture resistant particleboard as a raw board for building work. Australian owned polytec makes decorative surfaces and cabinet doors for kitchens, laundries and wardrobes. Leave a gap at the back of the cabinet for pipes and valves, and an access panel if the plumbing sits behind a fixed back. Seal cut edges around the waste and taps, since bare particleboard swells when it gets wet.

A splashback protects the wall behind the sink from water, detergent and the spray from rinsing. Tiles, glass, laminate and stone are all used, and each needs a sealed joint where it meets the sink or bench. Silicone along that joint stops water running down behind the cabinet, where it can go unnoticed for months. Book the splashback after the sink is fixed, so the tiler or installer can work to the final position. Check the joint each year and replace silicone that has lifted or turned black.

Hot Water to the Laundry Sink

Laundry sinks in older homes sometimes have only a cold tap, or a hot tap fed by a long pipe that takes time to run warm. Adding a new hot water line to the laundry is estimated at $350 to $900, depending on the distance from the water heater. Fisher & Paykel's installation guide for its top loaders says hot water should not exceed 65°C and cold water 35°C. The same guide says a registered plumber should select and fit a tempering valve where the heater lacks temperature control, such as solar heating or a wet back, which heats water from a wood fire.

A tempering valve mixes hot and cold water to hold the outlet at a set temperature. For the types of valve and how plumbers service them, see our page on tempering and mixing valves. If the hot water unit itself is old or slow, look at repair and replacement options in our hot water services guide. Find out where the laundry hot water comes from before you book, so the quote covers the right work. Long runs of hot pipe can be insulated to keep the water warm on the way to the sink.

Some older homes have a cold-only laundry, and some owners are happy to keep it that way. Fisher & Paykel's guide says to fit a blanking cap, a small cover that seals the unused inlet, on the machine's hot valve where only cold water is available. Even so, a hot tap at the sink is handy for soaking stains, rinsing mops and washing hands after gardening. If you add one later, the pipe run and any wall or floor openings are the main costs. Getting the hot line priced as a separate item lets you decide whether to include it.

Sinks in Garages, Outdoor Laundries and Low Spots

Garage and outdoor laundries need the same plumbing as indoor ones, plus protection from weather and knocks. Running an extra water supply to a distant garage laundry is estimated at $400 to $700 on our NSW laundry pages. The drain is the harder part, because the sink must connect to the sewer through a trap and not to a stormwater pipe. Sydney Water notes that, unlike wastewater, stormwater is not treated before it flows into creeks, rivers and the ocean. Grey water means used water from sinks, basins, showers and washing machines, as distinct from toilet waste. Sinks beside an outdoor tap can share the water line, and you can plan new tap positions with our guide to outdoor tap installation.

Some laundries sit lower than the sewer line, such as in a basement or a garage below the house. Where water cannot flow downhill to the drain, a pump can lift it to a higher pipe. Pump-assisted drainage, using a small transfer pump or a macerator unit that pushes the water up to the drain, is estimated at $800 to $2,200. Pumps need a power point nearby, so book an electrician as well as the plumber. You can arrange that part of the job through our page on power point installation.

Reusing laundry water on the garden is a different project from connecting a sink to the sewer. Greywater systems collect and treat or divert used water, and you can compare the options on our greywater system page. Reusing greywater has its own rules, so do not run a hose from the sink outlet onto the garden as a shortcut. Your licensed plumber can tell you what may be connected where on your property.

Older Laundries, Asbestos and Hidden Damage

Some older houses have the laundry on an enclosed back verandah or in a separate wash house. SafeWork NSW warns that asbestos may be present in a house built before the late 1980s. Fibre cement wall sheeting, floor coverings and the old wrapping around pipes in these laundries can all contain asbestos. Do not drill, cut or sand old sheeting behind a sink until a test confirms what it is. Testing before a laundry renovation, called an asbestos assessment, is estimated at $350 to $700 on our NSW pages. If removal is needed, check on our asbestos removal page when a licensed removalist must do it.

Water leaking from an old sink for years can rot timber floors, skirting boards and the bottom of wall frames. These problems can stay hidden until the old cabinet is pulled out on the day. Good quotes set out how hidden damage will be handled, including an hourly rate or a fixed price for extra work. Agree in writing that the plumber will stop and call you before starting work outside the quote.

Apartments, Strata Lots and Rentals

In a strata building, responsibility for the sink and pipes is split between the lot owner and the owners corporation, the body made up of all owners that manages shared areas. The NSW common property memorandum lists the laundry sink, and the pipes and S-bend (the trap) beneath it, as the lot owner's responsibility. Common property means the shared parts of the building, and pipes within common property walls, floors and ceilings are listed as the owners corporation's responsibility. Check your by-laws, the building's own rules, and strata records with the strata manager before booking, since building records can differ. For building-wide pipe problems, find out who arranges repairs in our strata plumbing guide.

Renovation rules in strata also matter if the job goes beyond a straight swap. The NSW strata renovation guidance lists kitchen renovations among minor renovations that need approval by a resolution at a meeting. It treats changes that require waterproofing as major renovations, which need a special resolution, a vote that must pass with a larger majority of owners. Laundries are not named on that page, so ask your strata manager how a sink swap or relocation is treated in your building.

Rental properties have their own water efficiency rules for tenants who are charged for water use. NSW guidance sets a 9 litre per minute limit for kitchen sink and bathroom basin taps, but laundry sink taps and washing machine taps are exempt. That means a laundry tap with a higher flow rate does not breach the limit. Kitchen and bathroom taps in the same property still need to meet the limit if water usage is passed on to the tenant. The same rules say taps and toilets must not leak when a tenancy begins, so fix a dripping laundry tap first. Read our guide to rental water efficiency compliance for flow testing and plumber statements in full.

Licences, WaterMark and Paperwork in NSW

Plumbing work in NSW needs a licence regardless of cost, and connecting a sink to water and drainage is plumbing work. The Home Building Act 1989 is the law under which plumbing licences are issued, and Building Commission NSW is the regulator, on 13 27 00. Before booking, search the plumber's name or number on the Verify licence register, choosing contractors and tradespeople. Assembling a flat-pack sink cabinet is not plumbing, so you can do that part yourself and leave the connections to the plumber. Ask the plumber to name the licence holder on the quote, especially if an employee or subcontractor will do the work.

The Plumbing and Drainage Act 2011 requires authorised products, and the WaterMark scheme certifies plumbing products for that purpose. WaterMark is run by the Australian Building Codes Board, which also publishes the Plumbing Code of Australia. Not every product needs WaterMark, so ask the plumber which parts of your sink, taps and waste must carry it. Products bought online from overseas may not be certified, and a plumber can refuse to fit them.

At the end of all plumbing and drainage work, the plumber completes a Certificate of Compliance and gives you a copy. Most plumbing and drainage work needs a Notice of Work, a form telling the regulator about the job, lodged before it starts, though emergency work and minor works such as replacing tapware are exempt. In Sydney, the Illawarra, the Blue Mountains and the Newcastle and Hunter areas, these documents are lodged online through the MyInspections system. Elsewhere in NSW, the local plumbing regulator handles them instead. Keep the certificate with your home records, since buyers and insurers may ask for it later. If the plumber does not mention it, ask when and how you will receive your copy.

Jobs over $5,000 including GST need a written contract, and the deposit cannot exceed 10 percent of the price. Straight sink swaps fall well under that figure, while a relocation combined with new cabinets and benchtops can pass it. Warranties set by law cover the work for 6 years for major defects and 2 years for other defects. Get the scope, price and start date in writing whatever the size of the job.

A Typical Sink Replacement Visit, Step by Step

Clear the laundry before the plumber arrives, including detergents, baskets and anything stored in the old cabinet. The plumber turns off the water to the sink, disconnects the taps and waste, and lifts the old sink out. They then check the pipes and floor underneath, which is when hidden rust, leaks or rot come to light. The new cabinet is levelled and fixed, the sink is set in place, and the taps and waste are connected. Finally the plumber runs water through the sink, checks every joint for leaks and reconnects the washing machine hose.

Like-for-like swaps can be finished in a few hours, while a relocation can take more than one day. Plan for the washing machine to be out of use while the sink and drain are disconnected. Removing an old machine at the same time is estimated at $50 to $100 if you are replacing it too. For larger loads of old cabinets and tiles, book collection through our rubbish removal page.

Before the plumber leaves, run both taps and fill the sink to check the waste drains quickly and quietly. Look under the cabinet with a torch for drips at the trap and the tap connections. Ask where the isolation valves are, and test that each one turns off the water to the sink. Run a short wash cycle while the plumber is still there, to check the hose stays in place and the sink copes with the flow. Note the date and the plumber's name on the invoice, so warranty claims are simple if a joint starts leaking later. Keep the sink's care guide and warranty card with the Certificate of Compliance.

Laundry Sink Work in Sydney and Regional NSW

Plumbers across NSW fit laundry sinks, though travel time and paperwork differ between city and country. Local rates and call-out fees are listed on our pages for plumbers in Sydney and the Newcastle and Hunter area. Regional plumbers may charge travel time on top of the call-out fee, so ask for it as a separate line. Outside the MyInspections areas, notices and certificates go to the local plumbing regulator, such as the local council. Local plumbers know which office to deal with and whether your job needs an inspection.

In homes not connected to a town sewer, laundry water drains to an on-site system, such as a septic tank. Tell the plumber if your home uses one, and read how those systems are looked after on our septic tank services page. Homes on tank water may have lower pressure at the laundry taps, which affects how fast the sink fills. Rural laundries in sheds or outbuildings may also need longer pipe runs, which adds to the time on site.

Getting Laundry Sink Quotes You Can Compare

Clear details at the start give you quotes that can be compared line by line. Send photos of the existing sink, the pipes underneath and the floor, along with the room's measurements. Name the sink and taps you want, or say if you want the plumber to supply them. Say whether the floor is timber or concrete and whether there is access under the house. Mention the age of the home, since it can affect pipe materials and the chance of asbestos.

Ask each plumber to break the quote into the sink, taps, waste and trap, labour, and disposal of the old sink. Fixed prices suit a straight swap, while an hourly rate with an estimate may suit work where the condition of the pipes is unknown. Check whether valve replacement, floor waste work and benchtop coordination are included or priced as extras. Compare the warranty periods offered on labour as well as the price, since they can differ between plumbers. Note how long each quote stays valid, since product prices can change before the job starts. Get at least two quotes for any job beyond a simple swap.

Details to Send With Your Sink Quote Request

Photos of the old sink, the cabinet interior, the pipes underneath and the floor around it.

Width, depth and height of the space, and the make and model of the new sink if you have chosen one.

Floor type, access under the house, home age, and the washing machine model so its drain hose height can be checked.

Clear photos and measurements let plumbers price the job more accurately before the site visit.

What to Look Out For in Laundry Sink Quotes

Low quotes can leave out parts that a working sink needs, such as the trap, isolation valves or tap connectors. Check that the quote names the sink and taps, or states the allowance for them if you have not chosen yet. Watch for vague words like plumbing as required, which leave the scope open. Ask what happens if the floor or pipes under the old sink are damaged once it is removed.

Be wary of anyone who avoids giving a licence number or asks for a large cash payment before starting. Check that the quote says a Certificate of Compliance will be issued when the job is finished. Look for a statement on who disposes of the old sink and packaging, since removal can be left out. For benchtop sinks, make sure the quote says who cuts the bench and who seals the joint. Confirm the warranty on the work and the maker's warranty on the sink and taps.

Red Flags in a Laundry Sink Quote

No licence number, no business name or no written scope.

No mention of the trap, waste, valves or the Certificate of Compliance.

A price far below others with no breakdown, or pressure to pay in cash before work starts.

Check every plumber's licence on the NSW Government register before you accept a quote.

Other Laundry Jobs to Book at the Same Time

Sink replacement is a good time to fix other small problems while the plumber is on site. Worn washing machine hoses can be replaced at the same time, estimated at $80 to $150. Fisher & Paykel's guide recommends changing inlet hoses every five years and connecting a new washer with the new hose sets supplied. Plumbers can connect a new or relocated machine straight after the sink, as described on our washing machine installation page. Dryers need their own space and power, and you can find installers through our page on dryer installation. Bundling jobs into one visit saves a second call-out fee.

Older laundries can also need ventilation, lighting and storage upgrades. Exhaust fans help clear steam and damp air, and you can book one through our exhaust fan installation page. Buyers looking at an older home can ask for the laundry to be checked during a pre-purchase plumbing inspection. Landlords with several properties can plan sink and tap upkeep through our rental property maintenance page.

Laundry Sink Plumbers in Every NSW Region

We connect homeowners, landlords and strata owners with licensed plumbers throughout New South Wales for laundry sink replacements, new laundry taps, drain work and sink relocations. Post your job once and compare quotes from plumbers who work in your area.

▶ Sydney Inner City 18 areas
Sydney CBD Surry Hills Darlinghurst Potts Point Paddington Redfern Newtown Glebe Balmain Pyrmont Ultimo Chippendale Alexandria Waterloo Zetland Erskineville Rozelle Leichhardt
▶ Greater Sydney 25 areas

Western Sydney

Parramatta Penrith Blacktown Mount Druitt Seven Hills Wetherill Park Auburn Fairfield Cabramatta St Marys

South Western Sydney

Liverpool Campbelltown Bankstown Revesby

Northern Sydney

Hornsby Chatswood Epping Macquarie Park Eastwood

The Hills District

Castle Hill Baulkham Hills

Inner West

Ryde Strathfield Burwood

St George

Hurstville Kogarah
▶ Sydney Coastal 23 areas

Northern Beaches

Manly Dee Why Curl Curl Freshwater Brookvale Collaroy Narrabeen Mona Vale Newport Avalon Palm Beach

Eastern Suburbs

Bondi Tamarama Bronte Coogee Maroubra Randwick

Harbour Suburbs

Double Bay Rose Bay Watsons Bay

Sutherland Shire

Cronulla Miranda Sutherland
▶ Hunter & Central Coast 19 areas

Central Coast

Gosford Terrigal Wyong The Entrance Tuggerah Erina Woy Woy

Hunter Valley

Newcastle Maitland Lake Macquarie Charlestown Belmont Raymond Terrace Cessnock Singleton Muswellbrook

Port Stephens

Nelson Bay Salamander Bay Shoal Bay
▶ Illawarra & South Coast 18 areas

Illawarra

Wollongong Shellharbour Kiama Dapto Corrimal Thirroul Gerringong

Shoalhaven

Nowra Berry Ulladulla Huskisson Vincentia

Sapphire Coast

Batemans Bay Moruya Narooma Bega Merimbula Eden
▶ North Coast 19 areas

Mid North Coast

Port Macquarie Forster Taree Kempsey Laurieton

Coffs Coast

Coffs Harbour Bellingen Sawtell Grafton Yamba

Northern Rivers

Byron Bay Tweed Heads Ballina Lismore Bangalow Lennox Head Brunswick Heads Mullumbimby
▶ Blue Mountains & Highlands 17 areas

Blue Mountains

Katoomba Leura Wentworth Falls Blackheath Springwood Hazelbrook Glenbrook Faulconbridge Lawson Blaxland Lithgow

Southern Highlands

Bowral Moss Vale Mittagong Bundanoon Robertson Berrima
▶ Regional NSW 21 areas

Central West

Orange Bathurst Dubbo Mudgee Parkes Forbes Cowra Young

Riverina

Wagga Wagga Albury Griffith Leeton Goulburn Queanbeyan

New England

Tamworth Armidale Inverell Moree Narrabri

Far West

Broken Hill Cobar

Laundry Sink Installation FAQs

How much does it cost to install a laundry sink in NSW?
Using 2027 estimates for NSW, a sink and cabinet supplied and installed costs about $350 to $1,400. Laundry tap labour adds about $120 to $250, plus the cost of the taps themselves. Moving the sink to a new position is estimated at $1,800 to $4,500 in plumbing alone. Benchtops, tiling and any repairs to the floor are extra. The written quote after the plumber sees the room is the figure to rely on.
Can I install a laundry sink myself in NSW?
You can assemble a flat-pack sink cabinet yourself, since that is not plumbing work. Connecting the taps to the water supply and the waste to the drain is plumbing work, and NSW requires a licence for it regardless of cost. Sydney Water says confident householders can change a tap washer, but bigger jobs need a licensed plumber. The plumber then gives you a Certificate of Compliance for the work.
What is the difference between an inset and an undermount laundry sink?
An inset sink drops into a hole cut in the benchtop, with its rim resting on the bench surface. Undermount sinks are fixed below the benchtop, so the bench edge runs around the bowl. Undermount sinks make wiping the bench into the bowl easier, and they suit stone tops. Both need a cabinet and benchtop made to the sink maker's template.
How high should a laundry sink be for a washing machine?
It depends on the machine, so check the installation guide for your model. Fisher & Paykel's top loader guide says the sink or standpipe should be at least 900 mm high, with 1200 mm as the maximum and 1000 mm recommended. LG's Australian guide sets 90 cm to 120 cm for the drain hose on top loading pump models. Lower outlets can let water drain out of the machine while it fills.
What is a bypass on a laundry sink?
A bypass is a separate opening at the back of some sinks that sends the washing machine's drain water straight to the waste. The water does not fill the bowl first, which keeps the sink free for other use while the machine empties. Lint from the wash still passes through the trap below. Keep the trap clear and ask the plumber to check it if the sink starts filling during a pump-out.
Does a laundry need a floor waste?
Floor wastes are drains in the floor that carry away water if the sink overflows or a hose bursts. Whether one is needed depends on the layout and the work being done, so ask your plumber what applies to your laundry. Adding one is estimated at $600 to $1,500 on a concrete slab and $400 to $900 on a timber floor. The floor must fall toward it, so plan it with the tiler and waterproofer.
Can I move my laundry sink to the other side of the room?
Yes, but the plumber has to run new water lines and extend the waste pipe to reach the drain. The waste needs enough fall, a steady downhill slope, so water flows away without pooling. On a concrete slab the floor may need cutting, which adds concrete and tiling work. Plumbing to move the sink is estimated at $1,800 to $4,500, before benchtops and finishes.
Do laundry taps in a rental have to meet the 9 litre per minute rule?
No, NSW guidance lists laundry sink taps and washing machine taps as exempt from the flow limit for rentals. The 9 litre per minute limit applies to kitchen sink and bathroom basin taps where tenants pay for water use. Taps and toilets must also be free of leaks when a tenancy begins. Fix any dripping laundry tap before a new tenant moves in.
Who pays to replace a laundry sink in a strata apartment?
The NSW common property memorandum lists the laundry sink, and the pipes and S-bend (the trap) beneath it, as the lot owner's responsibility. Pipes inside common property walls, floors and ceilings belong to the owners corporation. Check your by-laws and strata records with your strata manager before booking. Work that needs waterproofing is treated as a major renovation and needs a special resolution, a vote needing a larger majority.
How long does a laundry sink replacement take?
Like-for-like swaps can be finished in a few hours, provided the pipes and floor underneath are sound. Relocating a sink or adding one where none existed can take a day or more. Inset and undermount sinks also depend on the benchtop being cut and fitted first. Plan for the washing machine to be out of use while the sink is disconnected.

Trades That Work Around a New Laundry Sink

For Trades & Contractors - NSW

Plumbers who fit laundry sinks, taps and wastes can find new work on the NSW job leads board, along with plumber jobs in NSW and emergency plumber jobs.

Ready for a New Laundry Sink?

Post your job and compare quotes from licensed NSW plumbers for laundry sink swaps, new taps and relocated sinks.

Get Free Plumber Quotes

About This Guide

This guide is general information only, and NSW rules, maker instructions, product ranges and prices can change. Confirm requirements with Building Commission NSW, your owners corporation where relevant, your appliance maker and a licensed plumber before work starts.

Reviewed by The Quote Yard Editorial Team

Published 18 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All NSW tradies are required to hold appropriate licences. Verify at NSW Fair Trading.
Prices are 2027 estimates for New South Wales and exclude benchtops, tiling, waterproofing, floor repairs and regional travel. Old sink disposal and benchtop cut-outs have no published band and are quoted per job.
Need work done? Get free quotes. Post a Job – It's Free