Rusty, Frayed or Leaking Hoses?

Tell us how many hoses you have and where they are, and compare quotes from licensed NSW plumbers.

Get Free Plumber Quotes

Typical Costs (2027 Estimates)

Call-out fee (business hours)$80-$150
Plumber hourly rate (business hours)$90-$180/hr
Hose swapped during a tap job$30-$80 per line
Mixer hoses, parts only$30-$60 per pair
Washing machine hose replacement$80-$150
Isolation valves, per pair$60-$150
Seized isolation valve replaced$100-$220

These figures are 2027 estimates for NSW homes. No published band covers a standalone hose visit, so plumbers price it on quote from the call-out, labour and parts.

Flexible Hose Replacement Services NSW - Get Local Quotes

Flexible hose replacement in NSW means swapping the short braided water lines that feed your taps, toilets and appliances before they leak or burst. These hoses sit under kitchen sinks and bathroom basins, behind toilet cisterns and on laundry taps, and they hold the full pressure of the street water supply every hour of the day. A worn hose can show rust on the braid, frayed strands, a bulge or damp fittings, and a licensed plumber can replace it in a short daytime visit. Our 2027 price estimates for NSW cover call-out fees, hose and valve add-ons and washing machine hoses, and we say plainly where no published price exists. Warning signs to check with a torch are listed, along with why braided hoses fail and what the WaterMark product approval mark and hose temperature ratings mean. We explain isolation valves, the small shut-off taps that should sit before each hose, and what to do in the first minutes after a burst. For appliances, there is maker advice on fitting new hose sets to washing machines and on dishwashers and washers with built-in leak protection. Strata owners can see how the NSW common property memorandum, a standard list of who repairs what, splits repair duties, and landlords can check the urgent repair rules for tenants. Hose work on a drinking water supply is licensed plumbing in NSW, so you will also learn how to check a licence and which forms to keep. Post your job to compare free quotes from licensed plumbers across Sydney and regional NSW.

Hose Replacement Plumbers Across NSW

Licensed plumbers replace braided hoses under sinks, basins and toilets, fit isolation valves and change appliance hoses in homes, apartments and rentals from Sydney to regional NSW.

Get Free Quotes

At a Glance - Flexible Hose Replacement in NSW (2027 Estimates)

Job 2027 Estimate (NSW) Suits Disruption Paperwork to Keep
Hose swapped during a tap job $30-$80 per line Worn hose found while a tap is changed Minutes per hose Tax invoice
Mixer hoses, parts only $30-$60 per pair Matching pair for one mixer tap Short shut-off at one sink Hose brand and rating
Washing machine hose replacement $80-$150 Old or kinked laundry hoses Machine pulled out briefly Tax invoice
Isolation valves, per pair $60-$150 Missing or worn shut-off valves Short shut-off at one fixture Tax invoice
Seized isolation valve replaced $100-$220 Valve that will not turn Main supply may be shut off Tax invoice
Kitchen mixer tap replacement $200-$550 Old mixer with worn hoses Sink out of use for the visit Certificate of Compliance
Basic leak investigation $200-$350 Leak with no visible hose at fault Short visit Written findings
Temporary make safe in an emergency $200-$600 Burst hose out of hours Water off until repaired Invoice and photos

Cost Depth: Where the Money Goes on a Hose Job

The hoses themselves are a small part of the bill, and the call-out fee and labour time make up the larger share of a small visit.

Seized valves, brand-specific hoses that need ordering and cisterns that are hard to reach are the items that push a simple job higher.

All figures are 2027 estimates for NSW. Water damage repairs, cabinet replacement and regional travel are priced separately.

What Flexible Hoses Do Under Sinks, Basins and Toilets

A flexible hose is the short, bendable water line that joins a fixed pipe in the wall to a tap, a toilet cistern or an appliance. Plumbers and product labels call them flexi hoses or braided hoses, because the outside is a woven sleeve of stainless steel or polymer around a rubber or plastic inner tube. You will find them under kitchen sinks and bathroom basins, behind toilets, and on the taps that feed a washing machine or dishwasher. They carry water at full mains pressure, the force of the street supply, all day and night, even when no tap is running. That constant pressure is the reason a worn hose can leak or split while the house is empty.

Replacement means a licensed plumber shuts off the water, removes the old hose and fits a new one rated for the job. The work is small, and a visit for one or two hoses can be booked as a standard daytime job. Hoses can also be changed during another booked plumbing job, which spreads the call-out fee across both tasks. Bursts are different, because water keeps flowing until someone closes a valve or the main supply. For urgent help after a burst, call an emergency plumber, and use this guide for planned replacement, prices and the rules behind them.

Flexible hoses differ from the copper or plastic pipes inside your walls, which are fixed in place and are not part of a routine swap. They also differ from the drain pipe under a sink, which carries waste water away and is not under mains pressure. The trap is the curved part of that drain, holding a little water to block sewer smells, and it has nothing to do with the supply hoses beside it. Supply hoses and drain pipes sit side by side in the same cabinet, so a careful look is needed to tell which one is wet. When water pools under a sink, the plumber first works out whether it comes from the supply side or the drain side. Drain leaks and slow sinks belong with blocked sink and basin repairs, while corroded supply pipes in the walls may need water pipe replacement.

Flexible Hose Replacement Prices for 2027

Quote Yard pages give 2027 estimates for the parts and add-on items in a hose job, but none prices a standalone hose visit as one figure. Your total is built from the call-out fee, labour time, the hoses themselves and any valves that need changing. For a daytime booking, expect a call-out fee of $80 to $150 across NSW, with labour charged at $90 to $180 per hour. Those figures cover a standard daytime visit, and the table below lists the add-ons that change the total. After-hours call-outs sit between $120 and $400, so planned replacement in business hours costs less than a visit at night.

Item 2027 Estimate (NSW) Main Price Factor
Flexible hose replaced during a tap job, per line $30-$80 Hose material and access
Call-out fee, business hours $80-$150 Distance and booking time
Plumber hourly rate, business hours $90-$180/hr Region and time on site
Mixer hoses, parts only, per pair $30-$60 Length and brand fitting
Washing machine hose replacement $80-$150 Hose type and tap condition
Isolation valves added or replaced, per pair $60-$150 Valve type and access
Seized isolation valve replaced $100-$220 Pipe condition and access
Kitchen mixer tap replacement $200-$550 Tap brand and under-sink access
Basic leak investigation $200-$350 Size of home and leak signs
After-hours call-out fee $120-$400 Time of day and urgency
Temporary make safe in an emergency $200-$600 Damage and shut-off access

The per-line figure is the extra charge for swapping a supply hose while a plumber is already changing a tap, so it assumes the visit is already paid for. Booking a visit only for hoses still means paying a call-out fee and labour, and NSW plumbers commonly charge a minimum of one hour. Fitting new hoses to every tap in a house takes longer than one hose, though the plumber can complete several in the same visit. Request a fixed price per hose, or a total for the whole house, before work starts. Isolation valves add cost when the old ones are seized, meaning stuck so they no longer turn or seal properly. Prices for other plumbing tasks can be compared in our NSW plumber pricing guide.

As a worked example at the low end of each band, a business hours call-out at $80 plus one hour at $90 comes to $170 before parts. Adding a pair of mixer hoses at $30 brings that example to $200. At the top of each band the same visit comes to $150 plus $180 plus $60, or $390. These sums are illustrations built from 2027 estimates and are not quotes, since access and the number of hoses change the real price.

Regional NSW rates sit a little lower, with business hours call-outs estimated at $60 to $120 and hourly labour at $70 to $150. Travel to remote or rural properties can add to that, so check whether a travel charge applies before you book. Sydney hourly rates are estimated at $100 to $180, with call-out fees up to $180. Plumbers in Wollongong and nearby areas can be compared through our Illawarra plumber page. Adding the hose job to a visit by a plumber already booked nearby can save a separate travel charge.

Warning Signs on a Braided Hose

Hose faults can be spotted with a torch and a dry tissue, without any tools. Rust spots or brown staining on the braid can mean the steel wires are corroding. Frayed or broken strands, where the braid has started to unravel, leave the inner tube with less support. Bulges or swelling along the hose suggest the inner tube is weakening under pressure. Kinks, tight loops and hoses stretched taut between the valve and the tap also put strain on the hose and its end fittings.

Water marks around the cabinet give further clues about a hose that is starting to leak. Dampness around the nut at either end, white or green crust on the fittings, or a swollen cabinet base can each mean there is a slow leak. Run a dry tissue along the hose and fittings, since a tissue shows moisture that is hard to see on chrome. If you find any of these signs, close the isolation valve for that hose if it turns freely, and book a plumber.

Five Minute Hose Check

Empty the cabinet under each sink and basin, then look along every hose from the wall valve to the tap with a torch.

Check behind each toilet and the washing machine as well, and feel the base of each cabinet for soft or swollen board.

Do not bend, twist or pull on a hose to look behind it, because that strain can start the leak you are checking for.

No maker or official source we checked gives a fixed replacement age for braided hoses, so this guide does not set one. Condition is the better guide, along with each hose's history, such as whether it has been kinked or knocked by stored items. Hoses supplied with a tap come with that maker's warranty terms, which can differ from the terms for the tap body. Holding on to the box or invoice for new hoses helps, since the brand and date help a later plumber judge their age. When nobody knows how old the hoses are, a plumber can check each one on a routine visit and replace the worn ones first.

Slow leaks that never show under the sink can still raise your water bill and damage floors out of sight. Reading the water meter before and after a period with every tap off is a simple way to see whether water is moving somewhere. Where the cause is not a visible hose, water leak detection can trace it, and a basic leak investigation is estimated at $200 to $350. Hidden leaks in walls and slabs need different equipment from a hose check, so mention any damp walls when you book.

Why Braided Hoses Fail

Inside a braided hose, the inner tube holds the pressure, while the outer braid protects that tube from knocks and limits swelling. Once the braid corrodes or frays, the tube has less support and can split. Water hammer is the bang or shudder in pipes when a tap or appliance valve closes fast and the moving water stops suddenly. Those pressure spikes travel through the pipes each time a washing machine or dishwasher valve snaps shut. During the visit, the plumber can check whether high pressure or water hammer is adding strain to the hoses in your home.

Australian appliance makers warn against kinks, with Fisher & Paykel telling installers to make sure there are none in its washer hoses. Chemicals stored under the sink can spill onto the braid, so keep containers sealed and away from the hoses. Firm, even tightening of the end nuts protects the rubber sealing washers, which can split if the nuts are forced. Hoses fitted with a twist, or forced to reach a tap that sits too far away, carry that strain from the day they go in. Choosing the right length and lining the hose up straight are part of a careful installation.

AS/NZS 3500.1, the Australian and New Zealand plumbing standard for water services, caps static pressure at 500 kPa for outlets inside a building, with fire service outlets excluded. Static pressure means the force in the pipes while every tap is closed, and kPa, short for kilopascals, is its unit. Where mains pressure is higher than that limit, a pressure limiting valve is needed to bring it down. Pressure can be tested during the hose visit, and loud banging pipes can be looked at by a specialist in water hammer and noisy pipe repairs.

WaterMark, Hose Markings and the Plumbing Standard

WaterMark is the national certification scheme for plumbing and drainage products, managed by the Australian Building Codes Board. The Plumbing and Drainage Act 2011 requires NSW plumbing work to use only authorised, meaning approved, products. Flexible hose assemblies are certified under the WaterMark scheme against AS 3499, the Australian standard for flexible hose assemblies used in water supply. Hoses with no markings, or those sold for garden or industrial use, may not be suitable for a drinking water connection inside the home. Request that the plumber leaves the packaging or notes the brand on the invoice, so you can see the certification details later.

Hose packaging and labels also show a temperature rating, which matters on the hot side of a mixer. Check the rating printed on the hose or its packaging, and confirm with the plumber that it suits your hot water. Hoses made for permanent tap and cistern connections differ from hoses sold for hand showers, garden taps or temporary use. A hose meant for a garden tap is not a substitute for a WaterMark certified supply hose under a sink, and new garden taps are fitted through outdoor tap installation. Licensed plumbers choose a hose rated for the pressure and temperature at each tap. Keep a note of the rating with the invoice so the next plumber can see what was fitted.

Standards also govern where hoses are installed, as well as how they are made. The plumbing standard AS/NZS 3500.1 requires flexible hoses to be installed in accessible positions and not buried. In plain terms, a braided hose should not be hidden inside a wall, set in a slab or sealed behind a fixed panel. Australian standards are published by Standards Australia, and licensed plumbers work to them as a condition of their licence.

The Australian Building Codes Board also publishes online WaterMark product records that list certified products by brand name, model and category. Flexible hose assemblies are one of those categories, and each record also shows whether the product is marked as lead free. Checking the brand and model printed on the packaging against those records confirms that the hose holds WaterMark certification. Your plumber can do this check for you and show you the packaging before fitting the hose. Hoses bought online from overseas sellers may carry no WaterMark at all, which is a good reason to let the plumber supply the parts.

Braided Hose Types, Lengths and End Fittings

Braided hoses for household water supply use a flexible inner tube wrapped in a woven outer layer. The braid can be stainless steel wire, as in the ABI Interiors pair, or a polymer woven over a plastic inner tube. PEX, short for cross-linked polyethylene, is a tough plastic also used for water pipes, and Nero lists PEX as the material of its mixer hose pair. Certification, temperature rating and fit with the tap count for more than the colour or finish of the braid. Your plumber chooses the hose to suit the job, so find out which brand and rating they plan to fit.

Hoses come in set lengths, from short tails for a basin tap to long hoses for a dishwasher that sits away from the sink. ABI Interiors lists a 450 mm pair, while the Bosch Aquastop extension for dishwashers is 220 cm long. Too short a hose ends up stretched, and too long a hose ends up looped or kinked inside the cabinet. The ends also vary, with a nut and rubber washer at the valve end and a threaded tail that screws into the tap body at the other. Bent tail hoses have a ready-made elbow near one end, which helps where the valve sits close to the back of the cabinet. Matching the thread and length to the tap and valve avoids adaptors, and each adaptor adds another joint that could leak.

Isolation Valves Beside Each Hose

An isolation valve, also called a service valve, is a small tap on the supply pipe that turns off water to one fixture without shutting off the whole house. AS/NZS 3500.1, the plumbing standard for water services, requires an isolating valve immediately before each flexible hose connected to a mixer, tap outlet or cistern. That valve lets a plumber change the hose without stopping water to the rest of the home. It also lets you stop a leaking hose in seconds, provided the valve still turns. Older homes may have no valves at all, or valves that have seized after years without use.

Plumbers price new or replacement valves as an add-on to a tap or hose job, at an estimated $60 to $150 per pair. One seized valve that has to be cut out and replaced is estimated at $100 to $220. Seized valves can make a simple hose job run longer, because the plumber may need to shut off the main supply to change them. Turning each valve off and back on once a year helps keep it usable when you need it. Do this gently, and stop if the handle feels stuck or water leaks from around the stem the handle turns on. Tap swaps and valve upgrades in the same visit are part of tap and mixer installation.

Isolation valves come in two common styles, and knowing which one you have helps in a hurry. A quarter-turn valve closes with a short turn of a lever, and it is shut when the lever sits across the pipe. A screw-down valve closes with several clockwise turns of a small handle or a screwdriver in a slot. Old screw-down handles can snap if forced, so turn them slowly and stop if they resist. Label each valve with a small tag showing which tap or appliance it serves, so anyone in the house can find the right one.

What Happens During a Replacement Visit

The plumber first checks that the isolation valve closes fully, or shuts off the main supply if it does not. They undo the old hose at the valve and the tap, check the threads and sealing washers, and measure the length needed. The new hose should reach without stretching, kinking or a tight loop, and it must suit the thread size on the tap. Some mixers use hoses made for that brand, so the plumber may need to order a matching pair. Once fitted, the water is turned back on and each joint is checked for leaks under pressure.

Toilet cisterns take a hose from the wall valve to the inlet valve, the part inside the cistern that refills the tank after each flush. Concealed cisterns and shrouded ones, where a cover hides the pipes, can be harder to reach, which adds time to the visit. Caroma makes a wound stainless steel flexible hose as a spare part for its shrouded toilet cisterns, so a plumber can order the matching part. Toilets that keep running or leak at the base have a different fault, fixed through toilet repairs.

Replacing both hoses on a mixer together is good practice, since they were fitted at the same time and have aged the same way. The plumber can also compare hoses across the home and suggest which ones need changing now and which can wait. Request the old hoses back if you want to see the wear for yourself. Hoses can look sound from outside while the inner tube weakens, so a plumber may recommend a change based on history as well as appearance. Write the date on a tag or inside the cabinet door so the next check is easier.

Hot Water, Shower Hoses and Concealed Cisterns

The hot supply to a mixer runs through its own hose, so that hose needs a temperature rating that suits the hottest water reaching the tap. Your plumber can measure the hot water temperature at the tap and fit a hose with a matching marking. Mention any recent change to your water heater when booking, since the hot water temperature may differ from before. Connections at the water heater itself are a separate job from the hoses under a sink. For heater faults, valve problems or a new unit, compare quotes through hot water services.

Hand shower hoses are a separate part from the supply hoses under a basin, even though both bend and both carry water. A hand shower hose only carries water while the shower runs, after the mixer has opened. That means it does not hold mains pressure while the bathroom is empty, unlike the supply hoses under the vanity. Split shower hoses still waste water and can wet walls and floors each time someone showers. Have the plumber look at the shower hose during the same visit, since the call-out fee is already paid. Replacement shower hoses come in several lengths, so measure the old one before a new one is ordered.

Concealed cisterns sit inside the wall, and the plumber reaches the valve and hose through the opening behind the flush button. That access is tight, so a concealed cistern hose takes longer to change than one on an exposed cistern. If the cistern keeps filling after a new hose is fitted, the inlet valve is the next part to check. Running toilet repairs that replace the inlet valve or the outlet valve, the part that releases water when you flush, are estimated at $80 to $350 in 2027. Have the cistern brand and model handy when you book, since spare parts are made to suit particular cisterns. Where the bowl will not clear when flushed, the fault sits in the drain and is handled through blocked toilet repair.

Washing Machines, Dishwashers and Fridges

Appliance hoses carry the same mains pressure as sink hoses, but they sit behind machines where leaks can go unnoticed. Washing machine hose replacement is estimated at $80 to $150 in 2027, while new taps or plumbing points for a laundry are priced through washing machine installation. Fisher & Paykel makes top loading washers such as the WL1264P1, and its installation guide says to use only the new inlet hose set supplied with the washer. The same guide asks owners to check for leaks again after 24 hours and to make sure there are no kinks in the hoses. Old hoses already carry years of wear, so keep the supplied set for the installer rather than reusing them. Turning off the washing machine taps before a holiday or a long break stops the hoses holding pressure while nobody is home.

Some appliances have built-in protection against hose leaks. Bosch makes an Aquastop extension hose for its dishwashers, 220 cm long, for kitchens where the machine sits further from the tap. Miele makes the WWV 980 WPS washing machine with a Waterproof system, which uses a second solenoid valve to stop water at the stopcock, the supply tap the hose connects to, if a leak occurs. A solenoid valve is an electrically controlled valve that opens and closes on a signal from the machine. Unilux makes a Universal Dual Layer Anti-Flood Inlet Hose, 1.5 m long, which it says stops water at the tap if a burst or leak is detected.

Unilux lists that hose for washing machines and dishwashers without their own flood protection, so check your model before buying one. Dishwasher hookups, including a new tap or a side connection taken off the sink's water pipe, are priced through dishwasher installation. Hose length matters as well, because extension hoses add more joints that need checking. Where a short hose cannot reach, a plumber can move the tap closer to the machine. Plumbers booked for garbage disposal installation under the same sink can check the nearby supply hoses during that visit.

Samsung makes side-by-side fridges with water and ice dispensers, which connect to the cold supply through a thin plastic line and a valve. Its Australian support page says the fridge water line must be connected by a qualified technician, and that its warranty does not cover that installation. It also says the line must not be bent, pinched or squashed, and that it should connect to a cold drinking water pipe, not a hot one. Leaks behind a fridge can soak flooring for days before anyone sees it, so check that line when you check the sink hoses. Fridge water lines and filters are handled through water filter and fridge water line installation, at an estimated $200 to $400 for a Sydney connection.

Hoses Supplied With Mixer Taps

Mixer taps, which blend hot and cold water through one spout, arrive with hoses already threaded into the tap body or packed in the box. Nero makes the Premium Flexible Mixer Tap Hose Pair in PEX, and its listing notes the pair is only suitable for Nero mixers. That kind of limit means a generic hose from a shop may not fit the tap you own. ABI Interiors makes a Flexi Hose H&C Pair 450mm in 316 stainless steel, with braided hoses for the hot and cold supply. Methven makes a 1500 mm PVC spiral hose as a replacement shower hose, which is a separate part from the supply hoses under the basin. Brand-specific hoses can take a few days to arrive, which is one reason to book a check before a hose fails.

Warranty terms also depend on who fits the tap and its hoses. Phoenix Tapware makes basin and kitchen mixers, and its Australian warranty page says its products must be installed by a licensed plumber. Zip makes HydroTap boiling and chilled water taps, and its installation page describes its install team as certified, qualified and licensed. File the plumber's invoice with the tap paperwork, since a warranty claim may ask who installed the product and when. Check with the tapware maker which hoses suit your tap before buying spares online.

If a Hose Bursts or Starts Leaking Fast

Turn off the isolation valve under the fixture if you can reach it safely, or close the main valve near the water meter. Knowing where the main valve is before anything goes wrong saves time, so find it now and check that it turns. Keep away from wet power points and appliances, and call an electrician if water has reached wiring or light fittings. Move belongings off wet floors and soak up what you can with towels. Then call a plumber, and note the time and what you saw in case you make an insurance claim.

Emergency attendance is estimated at $180 to $350, and a temporary make safe, where the plumber stops the leak until a full repair, at $200 to $600. When the right hose is in the van, the plumber can fit it on the same visit and avoid a second call-out. Water that ran for hours may have soaked into cabinets, skirting boards and the floor below. Soaked carpet should be dried promptly, and specialists in flood and water damage carpet cleaning lift, dry and treat it. Split pipes inside a wall need burst pipe repairs, which is a different job from a hose swap. Ask for the plumber's note of what failed, since it helps with any insurance claim and with planning other hose changes.

Particleboard cabinet bases swell and lose strength once soaked, and swollen boards do not shrink back when they dry. Timber boards can curl up at the edges, and plaster near the floor line can stain or soften. Damp left inside wall cavities and cabinets can lead to mould, so open the doors and run fans or a dehumidifier to dry the area. Mould that appears on walls or ceilings after a leak can be treated through bathroom mould removal and prevention. Request a moisture reading before cabinets or flooring are replaced, so new materials are not fitted over damp.

Home and contents policies set their own terms for sudden bursts, slow leaks and damage that builds up over time. Read your policy wording or call your insurer before arranging repairs beyond the emergency stop, since some insurers want to inspect first. Photos of the failed hose, the valve and the water damage help any claim, so take them before the plumber removes the hose. Hold on to the burst hose itself, along with the plumber's invoice noting what failed and what was replaced.

Apartments, Lot Owners and the Owners Corporation

In a strata building, each apartment is a lot, and the owners corporation is the body made up of all lot owners that manages the shared parts of the building. Those shared parts are the common property, which includes pipes inside common property walls, floors and ceilings. By-laws are the building's own rules, and under section 107 of the Strata Schemes Management Act 2015 they may adopt a common property memorandum. That memorandum states whether a lot owner or the owners corporation is responsible for maintaining, repairing or replacing listed items. By-laws can exclude items from the memorandum, and a common property rights by-law takes priority where the two conflict. Not every scheme has adopted it, so check your by-laws or ask your strata manager.

The NSW Government's common property memorandum does not name flexible hoses. A stopcock is a valve that shuts off water to a pipe, such as the main valve for an apartment. The memorandum puts pipes downstream of any stopcock that serve only one lot, and sit outside common property walls, in the lot owner's column. The lot owner's column also lists the pipes and S bend, the curved drain pipe, under a sink, laundry sink or basin, toilet bowls and cisterns, and taps with their hardware. The owners corporation column lists pipes within a common property wall, floor or ceiling, and the main stopcock to each unit. Where the memorandum applies, a hose under your own basin sits in the lot owner's column, but the strata plan and by-laws decide each case.

Water from a burst hose can travel to the unit below, so tell the strata manager and your neighbours straight away. The owners corporation may need to inspect common property such as ceilings or walls, and it may arrange its own plumber for that part. Some buildings run a program to check hoses across every lot, and the cost split then depends on the by-laws and what owners agree. Building-wide plumbing questions go through strata and body corporate plumbing, where common property tap or fixture repairs are estimated at $150 to $450. The NSW Civil and Administrative Tribunal hears strata disputes that owners and the owners corporation cannot settle themselves.

Landlords, Tenants and Rental Homes

NSW tenancy rules list a burst water service or a serious water service leak as an urgent repair. If the landlord or agent cannot be reached, a tenant may arrange urgent repairs up to $1,000, and the landlord must repay that amount within 14 days. The work must be done by a licensed tradesperson where one is needed, which for hose work means a licensed plumber. Tenants who spot a weeping or rusty hose should report it in writing, so the landlord can arrange a planned repair before it fails. Keep a copy of that message and any reply, along with photos of the hose.

To charge tenants for water usage, a landlord has to meet NSW water efficiency rules, and one of them is that taps and toilets must not leak when the tenancy begins. Fixing weeping hose joints during the same visit as a tap check keeps the property ready for the next lease. The full checklist is part of rental water efficiency compliance, and a licensed plumber can confirm the results in writing. Hose checks under every sink can be added to rental property maintenance visits between tenancies.

Tenants should not fit new hoses themselves, because the work needs a licence and the lease may limit changes to fixtures. If a hose bursts, turn off the valve, tell the landlord or agent at once, and follow up in writing. Dated photos help show when the problem was found and reported. Tenancy disputes about repairs or costs can go to the NSW Civil and Administrative Tribunal if the parties cannot agree. Landlords who act quickly on a written report limit the risk of water spreading to floors, ceilings and the property next door.

Cafes, Offices and Homes Left Empty

Commercial kitchens use pre-rinse spray units, a tall tap with a hose and spray head for rinsing dishes, and those hoses flex with daily use. Enware makes a Food Service Teflon Hose Kit, 1000 mm long, as a replacement hose for pre-rinse tapware, and states that it meets AS/NZS 3499. Galvin Engineering makes an Ezy-Wash stainless steel heavy duty pre-rinse hose, 1015 mm long, as a spare part for its pre-rinse units. Cafes, offices and shared staff kitchens also have under-sink hoses feeding sinks, boiling water units and dishwashers. Business owners can book regular checks through commercial plumbing maintenance, so hoses are changed on a schedule and not after a flood.

Homes left empty for weeks, such as holiday houses and rentals between tenants, carry extra risk because a leak can run with nobody there to see it. Closing the main water valve before leaving stops water reaching any hose while the house is empty. Arrange for a neighbour or agent to look inside after long absences, and check under each sink when you return. Battery leak alarms placed under sinks and behind the washing machine sound or send a phone alert when water touches the sensor, giving another warning.

Plumber Licences and the Forms You Should Receive

Every plumber doing this work in NSW must hold a licence, whatever the job costs, and fitting a hose to a drinking water supply counts as plumbing work. According to Sydney Water, householders who feel confident may replace a tap washer themselves, while bigger plumbing problems call for a licensed plumber. Building Commission NSW regulates plumbers and can be reached on 13 27 00. You can check a plumber's licence on the NSW Government's Verify licence register under Contractors and tradespeople. Licences are issued under the Home Building Act 1989. Unlicensed work can also affect warranties, since tapware makers such as Phoenix Tapware ask for installation by a licensed plumber.

Before most plumbing work starts, the plumber lodges a Notice of Work, a form that tells the regulator what work is planned. The NSW Government lists emergency work and minor work, such as replacing tapware, as not needing a Notice of Work. Your plumber can tell you whether the hose job falls in that group, since the answer depends on exactly what work is done. At the end of all plumbing work, the plumber completes a Certificate of Compliance, a form confirming the work meets the standards, and gives a copy to the person who arranged it. Keep that certificate with your invoice and the hose packaging.

In Sydney, the Illawarra, the Blue Mountains, Newcastle and the Hunter, plumbers lodge these forms online through the MyInspections Gateway, a government lodgement website. Elsewhere in NSW, the local plumbing regulator, which can be the local council, uses a combined Notice of Work and Certificate of Compliance form. Councils run water and sewer services in a number of regional towns, and your plumber will know which regulator applies. Plumbers in the Hunter can be compared on our Newcastle and Hunter plumber page, and Sydney Water handles faults on its own mains on 13 20 90.

Planning a Whole-House Hose Change

Changing every hose at once suits homes where nobody knows the hoses' age, or where one has already failed. Count the fixtures room by room, including the kitchen sink, each basin, each toilet, the laundry taps, the dishwasher, the fridge line and any filter or boiling water unit. Each mixer tap uses two hoses, so a home with two bathrooms and a kitchen can have more hoses than owners expect. Sorting them into worn, doubtful and sound lets you spread the cost over two visits if needed. Book in business hours, since after-hours labour is estimated at $150 to $250 an hour. Planning the day also lets you clear the cabinets beforehand, which saves the plumber time.

Good moments for a hose change include a new tenancy, a kitchen or bathroom upgrade, a new tap, or the weeks before a long trip. Settlement on a home purchase is another, since new owners have no record of when the hoses went in. Store the hose brand, rating and date of fitting with your home records. Strata owners should tell the building manager before any work that needs water shut off beyond their own valves. If the plumber must close a valve that serves other apartments, the building manager may set the time so neighbours can prepare.

Getting Clear Quotes for New Hoses

Count the hoses before you ask for quotes, including those under each sink and basin, behind each toilet, on the laundry taps and behind the fridge. Note whether each one has an isolation valve and whether that valve turns. Photos of each hose, its end fittings and any rust or water marks help a plumber judge the job before visiting. Mention if the home is an apartment, since strata access rules or building shut-offs can affect timing. With that list in hand, plumbers can quote a fixed price for the whole house.

Details to Send With Your Quote Request

The number of hoses and where each one is, the age of the home, and whether you know when the hoses were last changed.

Photos of each hose and valve, the brand of each mixer tap, and any water damage, swelling or stains in the cabinets below.

Clear details help each plumber quote for the same work, which makes the quotes easier to compare side by side.

Compare quotes for the same work: the number of hoses, the hose brand and rating, valves included, and the call-out and labour charges. Quotes that list only an hourly rate may end up higher or lower than a fixed price, depending on how long the work takes. Check whether the hoses are WaterMark certified and whether the Certificate of Compliance is included. Plumbers across Sydney can be compared through our hire a plumber in Sydney page, and other household jobs are listed in our NSW plumbing services hub.

Confirm how long the water will be off and whether the plumber will close only the fixture valves or the whole house. Book a time when someone can stay home to check the joints again a few hours after the visit. Clear the cabinets and move stored items away from the hoses before the plumber arrives. Make sure the plumber can reach the water meter and main valve in case a fixture valve will not close. Look under each sink again the next morning, and report any damp to the plumber straight away.

What to Look Out For in Flexible Hose Replacement Quotes

Be wary of a quote to replace hoses that says nothing about the isolation valves, since a seized valve can add cost once the job begins. Watch for unbranded hoses with no WaterMark details, or hoses quoted without a length or temperature rating. Any plumber who suggests hiding a braided hose inside a wall or behind a sealed panel is going against the standard's rule that hoses stay accessible. Check that the quote shows the plumber's licence number so you can confirm it on the register. Pressure to replace every hose in a building at once, without photos or a list of faults, is a reason to get a second quote.

Watch also for quotes that leave out the leak check after the water is turned back on. Complete quotes state that each joint will be tested under pressure and that old hoses will be removed or handed back. Very low prices can exclude the call-out fee or assume generic hoses that may not fit your mixer. Find out how the plumber handles brand-specific hoses that need ordering, and whether a second visit costs extra.

Other Jobs to Combine With New Hoses

Hose visits are a good time to deal with nearby faults, because the water is already off and the call-out fee is paid. Dripping taps and worn cartridges, the parts inside a mixer that control flow, can be fixed in the same visit through leaking tap repairs. Loose basins, worn drain outlets and sticking fittings are handled through bathroom and kitchen fixture repairs. Weak flow at one tap can come from a kinked hose, while weak flow everywhere needs low water pressure repairs. Mention every small fault when you book, so the plumber brings the right parts.

New sinks and sink moves are larger jobs, with new hoses and valves fitted as part of kitchen sink installation. Laundry upgrades are similar, and laundry sink installation includes fresh connections for the taps. Buyers can ask for hoses to be checked during a pre-purchase plumbing inspection before settlement, the day the sale is finalised. Each of these jobs turns the water off at the fixture anyway, so the extra cost of new hoses is small compared with a separate visit later.

Hose Replacement Plumbers in Every NSW Region

We connect homeowners, landlords and strata owners with licensed plumbers who replace flexible hoses and isolation valves across Sydney and regional NSW.

▶ Sydney Inner City 18 areas
Sydney CBD Surry Hills Darlinghurst Potts Point Paddington Redfern Newtown Glebe Balmain Pyrmont Ultimo Chippendale Alexandria Waterloo Zetland Erskineville Rozelle Leichhardt
▶ Greater Sydney 25 areas

Western Sydney

Parramatta Penrith Blacktown Mount Druitt Seven Hills Wetherill Park Auburn Fairfield Cabramatta St Marys

South Western Sydney

Liverpool Campbelltown Bankstown Revesby

Northern Sydney

Hornsby Chatswood Epping Macquarie Park Eastwood

The Hills District

Castle Hill Baulkham Hills

Inner West

Ryde Strathfield Burwood

St George

Hurstville Kogarah
▶ Sydney Coastal 23 areas

Northern Beaches

Manly Dee Why Curl Curl Freshwater Brookvale Collaroy Narrabeen Mona Vale Newport Avalon Palm Beach

Eastern Suburbs

Bondi Tamarama Bronte Coogee Maroubra Randwick

Harbour Suburbs

Double Bay Rose Bay Watsons Bay

Sutherland Shire

Cronulla Miranda Sutherland
▶ Hunter & Central Coast 19 areas

Central Coast

Gosford Terrigal Wyong The Entrance Tuggerah Erina Woy Woy

Hunter Valley

Newcastle Maitland Lake Macquarie Charlestown Belmont Raymond Terrace Cessnock Singleton Muswellbrook

Port Stephens

Nelson Bay Salamander Bay Shoal Bay
▶ Illawarra & South Coast 18 areas

Illawarra

Wollongong Shellharbour Kiama Dapto Corrimal Thirroul Gerringong

Shoalhaven

Nowra Berry Ulladulla Huskisson Vincentia

Sapphire Coast

Batemans Bay Moruya Narooma Bega Merimbula Eden
▶ North Coast 19 areas

Mid North Coast

Port Macquarie Forster Taree Kempsey Laurieton

Coffs Coast

Coffs Harbour Bellingen Sawtell Grafton Yamba

Northern Rivers

Byron Bay Tweed Heads Ballina Lismore Bangalow Lennox Head Brunswick Heads Mullumbimby
▶ Blue Mountains & Highlands 17 areas

Blue Mountains

Katoomba Leura Wentworth Falls Blackheath Springwood Hazelbrook Glenbrook Faulconbridge Lawson Blaxland Lithgow

Southern Highlands

Bowral Moss Vale Mittagong Bundanoon Robertson Berrima
▶ Regional NSW 21 areas

Central West

Orange Bathurst Dubbo Mudgee Parkes Forbes Cowra Young

Riverina

Wagga Wagga Albury Griffith Leeton Goulburn Queanbeyan

New England

Tamworth Armidale Inverell Moree Narrabri

Far West

Broken Hill Cobar

Flexible Hose Replacement FAQs

How much does flexible hose replacement cost in NSW?
No Quote Yard page prices a hose visit as one figure, so the cost is built from parts. Using 2027 estimates, a business hours call-out is $80 to $150 and labour is $90 to $180 an hour. Swapping a supply hose during a tap job adds $30 to $80 per line, and a pair of mixer hoses costs $30 to $60 in parts. Washing machine hose replacement is estimated at $80 to $150.
How do I know if a braided hose needs replacing?
Look along each hose with a torch for rust spots, frayed or broken strands, bulges and kinks. Check the nuts at each end for dampness or white and green crust. Run a dry tissue along the hose, since it picks up moisture that is hard to see. Any of these signs is a reason to close the isolation valve and book a licensed plumber.
Can I replace a flexi hose myself in NSW?
Plumbing work in NSW needs a licence regardless of the cost of the job. Sydney Water says a confident householder can change a tap washer, but bigger problems need a licensed plumber. Tapware makers such as Phoenix Tapware also ask for installation by a licensed plumber in their warranty terms. At the end of the job, the licensed plumber completes a Certificate of Compliance.
Do flexible hoses need to be WaterMark certified?
Yes, flexible hose assemblies must be WaterMark certified to AS 3499, the Australian standard for hose assemblies in water supply. The WaterMark scheme is managed by the Australian Building Codes Board. Check the temperature rating on the hose packaging, since the hot side needs a hose rated for hot water. Ask your plumber to note the hose brand on the invoice.
What should I do if a flexi hose bursts?
Close the isolation valve under the fixture, or shut the main valve near the water meter if that valve will not turn. Keep away from wet power points and appliances. Call a plumber, then take photos of the hose and any damage for your insurer. Emergency attendance is estimated at $180 to $350 in 2027.
Who pays to replace hoses in a strata apartment?
The NSW common property memorandum does not name flexible hoses, and it only applies where a scheme's by-laws adopt it. Where it applies, pipes that serve only one lot and sit outside common property walls are in the lot owner's column. Taps, sinks, basins, toilets and cisterns are also listed for the lot owner. Check your by-laws and strata plan, or ask your strata manager.
Is a burst flexi hose an urgent repair in a rental home?
NSW tenancy rules list a burst water service or a serious water service leak as an urgent repair. If the landlord or agent cannot be reached, the tenant may arrange repairs up to $1,000. The landlord must repay that amount within 14 days. The work must be done by a licensed plumber, and the tenant should keep the invoice.
Do I need an isolation valve for each hose?
AS/NZS 3500.1 calls for an isolating valve immediately before each flexible hose connected to a mixer, tap outlet or cistern. The valve lets you stop a leaking hose without turning off water to the whole house. Adding or replacing valves is estimated at $60 to $150 per pair in 2027. Replacing a seized valve that must be cut out costs about $100 to $220.
Should I reuse old hoses on a new washing machine?
Fisher & Paykel's installation guide for its WL1264P1 top loaders says to use only the new inlet hose set supplied with the washer. The same guide says to check for leaks again after 24 hours. Old hoses carry the wear of the previous machine, so fitting the new set lowers the risk of a leak. Washing machine hose replacement is estimated at $80 to $150.
Can a braided hose be hidden inside a wall?
No, the plumbing standard AS/NZS 3500.1 says flexible hoses must be used in accessible locations and must not be buried. That means a hose should stay where it can be seen and reached, such as inside a cabinet. Hidden hoses cannot be checked and may leak into the wall cavity before anyone notices. Ask your plumber to use fixed pipe where the connection must be concealed.

Help Around Leaks and Appliance Hoses

For Trades & Contractors - NSW

Licensed plumbers who replace hoses, valves and tapware can find new work on our NSW job leads board, along with plumber jobs in NSW and emergency plumber jobs.

Ready to Replace Old Flexible Hoses?

Post your job and compare quotes from licensed NSW plumbers for hoses, valves and appliance connections.

Get Free Plumber Quotes

About This Guide

This guide is general information only, and NSW rules, standards, strata by-laws and product details can change. Prices are 2027 estimates and do not replace a written quote from a licensed plumber. Check your own insurance policy, by-laws and lease before relying on anything here.

Reviewed by The Quote Yard Editorial Team

Published 18 November 2026 ·

How The Quote Yard Works

We connect you with independent local tradies and service providers, we don't perform any trade work ourselves. Tradies provide their own quotes directly to you. Always confirm licensing, insurance, and scope of work before engaging any provider.

All NSW tradies are required to hold appropriate licences. Verify at NSW Fair Trading.
Prices are 2027 estimates for New South Wales and exclude water damage repairs, cabinet replacement and regional travel. No published band covers a standalone hose replacement visit, so it is priced on quote.
Need work done? Get free quotes. Post a Job – It's Free